Merge tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "The main change this time was the introduction of the drivers/genpd
  subsystem that gets split out from drivers/soc to keep common
  functionality together.

  The SCMI driver subsystem gets an update to version 3.2 of the
  specification. There are also updates to memory, reset and other
  firmware drivers.

  On the soc driver side, the updates are mostly cleanups across a
  number of Arm platforms. On driver for loongarch adds power management
  for DT based systems, another driver is for HiSilicon's Arm server
  chips with their HCCS system health interface.

  The remaining updates for the most part add support for additional
  hardware in existing drivers or contain minor cleanups. Most of these
  are for the Qualcomm Snapdragon platform"

* tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits)
  bus: fsl-mc: Use common ranges functions
  soc: kunpeng_hccs: fix some sparse warnings about incorrect type
  soc: loongson2_pm: add power management support
  soc: dt-bindings: add loongson-2 pm
  soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
  genpd: rockchip: Add PD_VO entry for rv1126
  bus: ti-sysc: Fix cast to enum warning
  soc: kunpeng_hccs: add MAILBOX dependency
  MAINTAINERS: remove OXNAS entry
  dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated
  irqchip: irq-versatile-fpga: remove obsolete oxnas compatible
  soc: qcom: aoss: Tidy up qmp_send() callers
  soc: qcom: aoss: Format string in qmp_send()
  soc: qcom: aoss: Move length requirements from caller
  soc: kunpeng_hccs: fix size_t format string
  soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
  dt-bindings: firmware: qcom: scm: Updating VMID list
  firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
  firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
  firmware: imx: scu-irq: add imx_scu_irq_get_status
  ...

34 files changed, 387 insertions, 84 deletions

diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
index d6774db257f0..59cc88a52f6b 100644
--- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
@@ -82,7 +82,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
     clock-controller@af00000 {
       compatible = "qcom,sm8250-dispcc";
       reg = <0x0af00000 0x10000>;
@@ -103,7 +103,7 @@ examples:
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
-      power-domains = <&rpmhpd SM8250_MMCX>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
       required-opps = <&rpmhpd_opp_low_svs>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml
index 23505c8c3dbd..d723bb11d947 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml
@@ -51,7 +51,7 @@ unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     clock-controller@abf0000 {
       compatible = "qcom,sm8350-videocc";
@@ -59,7 +59,7 @@ examples:
       clocks = <&rpmhcc RPMH_CXO_CLK>,
                <&rpmhcc RPMH_CXO_CLK_A>,
                <&sleep_clk>;
-      power-domains = <&rpmhpd SM8350_MMCX>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
       required-opps = <&rpmhpd_opp_low_svs>;
       #clock-cells = <1>;
       #reset-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
index 87ae74166807..8178c35bc348 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
@@ -64,7 +64,7 @@ examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sm8450.h>
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
     clock-controller@ade0000 {
       compatible = "qcom,sm8450-camcc";
       reg = <0xade0000 0x20000>;
@@ -72,7 +72,7 @@ examples:
                <&rpmhcc RPMH_CXO_CLK>,
                <&rpmhcc RPMH_CXO_CLK_A>,
                <&sleep_clk>;
-      power-domains = <&rpmhpd SM8450_MMCX>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
       required-opps = <&rpmhpd_opp_low_svs>;
       #clock-cells = <1>;
       #reset-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml
index 1dd1f696dcd3..2f22310b08a9 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml
@@ -76,7 +76,7 @@ examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sm8450.h>
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
     clock-controller@af00000 {
       compatible = "qcom,sm8450-dispcc";
       reg = <0x0af00000 0x10000>;
@@ -91,7 +91,7 @@ examples:
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
-      power-domains = <&rpmhpd SM8450_MMCX>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
       required-opps = <&rpmhpd_opp_low_svs>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
index f1c6dd50f184..bad8f019a8d3 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
@@ -64,13 +64,13 @@ examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sm8450.h>
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
     videocc: clock-controller@aaf0000 {
       compatible = "qcom,sm8450-videocc";
       reg = <0x0aaf0000 0x10000>;
       clocks = <&rpmhcc RPMH_CXO_CLK>,
                <&gcc GCC_VIDEO_AHB_CLK>;
-      power-domains = <&rpmhpd SM8450_MMCX>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
       required-opps = <&rpmhpd_opp_low_svs>;
       #clock-cells = <1>;
       #reset-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml
index ab25f7cbaa2e..c129f8c16b50 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml
@@ -76,7 +76,7 @@ examples:
   - |
     #include <dt-bindings/clock/qcom,sm8550-gcc.h>
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
     clock-controller@af00000 {
       compatible = "qcom,sm8550-dispcc";
       reg = <0x0af00000 0x10000>;
@@ -99,7 +99,7 @@ examples:
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
-      power-domains = <&rpmhpd SM8550_MMCX>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
       required-opps = <&rpmhpd_opp_low_svs>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
index 2b07146161b4..6de01cf3259d 100644
--- a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
@@ -124,7 +124,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
     clock-controller@ab00000 {
       compatible = "qcom,sdm845-videocc";
       reg = <0x0ab00000 0x10000>;
@@ -133,7 +133,7 @@ examples:
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
-      power-domains = <&rpmhpd SM8250_MMCX>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
       required-opps = <&rpmhpd_opp_low_svs>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
index 687c8c170cd4..acd2ed391b2f 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
@@ -54,7 +54,7 @@ examples:
     #include <dt-bindings/clock/qcom,gcc-sm8250.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8250.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-controller@ae01000 {
         compatible = "qcom,sm8250-dpu";
@@ -72,7 +72,7 @@ examples:
         assigned-clock-rates = <19200000>;
 
         operating-points-v2 = <&mdp_opp_table>;
-        power-domains = <&rpmhpd SM8250_MMCX>;
+        power-domains = <&rpmhpd RPMHPD_MMCX>;
 
         interrupt-parent = <&mdss>;
         interrupts = <0>;
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
index 368d3db0ce96..5cfb9b917e90 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
@@ -76,7 +76,7 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8250.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-subsystem@ae00000 {
         compatible = "qcom,sm8250-mdss";
@@ -121,7 +121,7 @@ examples:
             assigned-clock-rates = <19200000>;
 
             operating-points-v2 = <&mdp_opp_table>;
-            power-domains = <&rpmhpd SM8250_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             interrupt-parent = <&mdss>;
             interrupts = <0>;
@@ -196,7 +196,7 @@ examples:
             assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8250_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&dsi0_phy>;
             phy-names = "dsi";
@@ -286,7 +286,7 @@ examples:
             assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8250_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&dsi1_phy>;
             phy-names = "dsi";
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
index 120500395c9a..1a4e03531a1b 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
@@ -51,7 +51,7 @@ examples:
     #include <dt-bindings/clock/qcom,gcc-sm8350.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8350.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-controller@ae01000 {
         compatible = "qcom,sm8350-dpu";
@@ -76,7 +76,7 @@ examples:
         assigned-clock-rates = <19200000>;
 
         operating-points-v2 = <&mdp_opp_table>;
-        power-domains = <&rpmhpd SM8350_MMCX>;
+        power-domains = <&rpmhpd RPMHPD_MMCX>;
 
         interrupt-parent = <&mdss>;
         interrupts = <0>;
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
index f2cbeb435f1b..8c89fb7fc8a3 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
@@ -81,7 +81,7 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8350.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-subsystem@ae00000 {
         compatible = "qcom,sm8350-mdss";
@@ -134,7 +134,7 @@ examples:
             assigned-clock-rates = <19200000>;
 
             operating-points-v2 = <&mdp_opp_table>;
-            power-domains = <&rpmhpd SM8350_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             interrupt-parent = <&mdss>;
             interrupts = <0>;
@@ -203,7 +203,7 @@ examples:
                                  <&mdss_dsi0_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8350_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&mdss_dsi0_phy>;
 
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml
index 0d17ece1c453..da3fd66c564f 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml
@@ -58,7 +58,7 @@ examples:
     #include <dt-bindings/clock/qcom,gcc-sm8450.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8450.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-controller@ae01000 {
         compatible = "qcom,sm8450-dpu";
@@ -83,7 +83,7 @@ examples:
         assigned-clock-rates = <19200000>;
 
         operating-points-v2 = <&mdp_opp_table>;
-        power-domains = <&rpmhpd SM8450_MMCX>;
+        power-domains = <&rpmhpd RPMHPD_MMCX>;
 
         interrupt-parent = <&mdss>;
         interrupts = <0>;
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
index 494e2a080e99..cfad5049a966 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
@@ -76,7 +76,7 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8450.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-subsystem@ae00000 {
         compatible = "qcom,sm8450-mdss";
@@ -130,7 +130,7 @@ examples:
             assigned-clock-rates = <19200000>;
 
             operating-points-v2 = <&mdp_opp_table>;
-            power-domains = <&rpmhpd SM8450_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             interrupt-parent = <&mdss>;
             interrupts = <0>;
@@ -210,7 +210,7 @@ examples:
             assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8450_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&dsi0_phy>;
             phy-names = "dsi";
@@ -305,7 +305,7 @@ examples:
             assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8450_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&dsi1_phy>;
             phy-names = "dsi";
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml
index ff58a747bb6f..99908fbe74f0 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml
@@ -57,7 +57,7 @@ examples:
     #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
     #include <dt-bindings/clock/qcom,sm8550-gcc.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-controller@ae01000 {
         compatible = "qcom,sm8550-dpu";
@@ -82,7 +82,7 @@ examples:
         assigned-clock-rates = <19200000>;
 
         operating-points-v2 = <&mdp_opp_table>;
-        power-domains = <&rpmhpd SM8550_MMCX>;
+        power-domains = <&rpmhpd RPMHPD_MMCX>;
 
         interrupt-parent = <&mdss>;
         interrupts = <0>;
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml
index 70ce7cb7a80d..5390a8e79ad3 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml
@@ -76,7 +76,7 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-subsystem@ae00000 {
         compatible = "qcom,sm8550-mdss";
@@ -130,7 +130,7 @@ examples:
             assigned-clock-rates = <19200000>;
 
             operating-points-v2 = <&mdp_opp_table>;
-            power-domains = <&rpmhpd SM8550_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             interrupt-parent = <&mdss>;
             interrupts = <0>;
@@ -205,7 +205,7 @@ examples:
             assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8550_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&dsi0_phy>;
             phy-names = "dsi";
@@ -294,7 +294,7 @@ examples:
             assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8550_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&dsi1_phy>;
             phy-names = "dsi";
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
index bdbee58a542b..4233ea839bfc 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
@@ -176,6 +176,7 @@ allOf:
             contains:
               enum:
                 - qcom,scm-qdu1000
+                - qcom,scm-sc8280xp
                 - qcom,scm-sm8450
                 - qcom,scm-sm8550
     then:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt
index 2a1d16bdf834..ea939f54c5eb 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt
@@ -6,7 +6,7 @@ controllers are OR:ed together and fed to the CPU tile's IRQ input. Each
 instance can handle up to 32 interrupts.
 
 Required properties:
-- compatible: "arm,versatile-fpga-irq" or "oxsemi,ox810se-rps-irq"
+- compatible: "arm,versatile-fpga-irq"
 - interrupt-controller: Identifies the node as an interrupt controller
 - #interrupt-cells: The number of cells to define the interrupts.  Must be 1
   as the FPGA IRQ controller has no configuration options for interrupt
@@ -19,6 +19,8 @@ Required properties:
   the system till not make it possible for devices to request these
   interrupts.
 
+The "oxsemi,ox810se-rps-irq" compatible is deprecated.
+
 Example:
 
 pic: pic@14000000 {
diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml
index 7915dcd2d99f..f66033ae8b59 100644
--- a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml
@@ -106,7 +106,7 @@ examples:
     #include <dt-bindings/clock/qcom,videocc-sm8250.h>
     #include <dt-bindings/interconnect/qcom,sm8250.h>
     #include <dt-bindings/clock/qcom,gcc-sm8250.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     venus: video-codec@aa00000 {
         compatible = "qcom,sm8250-venus";
@@ -114,7 +114,7 @@ examples:
         interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
         power-domains = <&videocc MVS0C_GDSC>,
                         <&videocc MVS0_GDSC>,
-                        <&rpmhpd SM8250_MX>;
+                        <&rpmhpd RPMHPD_MX>;
         power-domain-names = "venus", "vcodec0", "mx";
 
         clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
index a02724221ff3..b40cec0eb651 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
@@ -39,6 +39,7 @@ properties:
 patternProperties:
   ".*@[0-9]+$":
     type: object
+    $ref: mc-peripheral-props.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
index 5acfcad12bb7..8d9dae15ade0 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
@@ -34,6 +34,8 @@ required:
 # The controller specific properties go here.
 allOf:
   - $ref: st,stm32-fmc2-ebi-props.yaml#
+  - $ref: ingenic,nemc-peripherals.yaml#
   - $ref: intel,ixp4xx-expansion-peripheral-props.yaml#
+  - $ref: ti,gpmc-child.yaml#
 
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
index 6da28e630577..80141eb7fc6b 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
@@ -215,7 +215,7 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/qcom,gcc-sm8250.h>
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     sdhc_2: mmc@8804000 {
       compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5";
@@ -232,7 +232,7 @@ examples:
       iommus = <&apps_smmu 0x4a0 0x0>;
       qcom,dll-config = <0x0007642c>;
       qcom,ddr-config = <0x80040868>;
-      power-domains = <&rpmhpd SM8250_CX>;
+      power-domains = <&rpmhpd RPMHPD_CX>;
 
       operating-points-v2 = <&sdhc2_opp_table>;
 
diff --git a/Documentation/devicetree/bindings/net/davicom,dm9000.yaml b/Documentation/devicetree/bindings/net/davicom,dm9000.yaml
new file mode 100644
index 000000000000..66a7c6eec767
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/davicom,dm9000.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/davicom,dm9000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Davicom DM9000 Fast Ethernet Controller
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    const: davicom,dm9000
+
+  reg:
+    items:
+      - description: Address registers
+      - description: Data registers
+
+  interrupts:
+    maxItems: 1
+
+  davicom,no-eeprom:
+    type: boolean
+    description: Configuration EEPROM is not available
+
+  davicom,ext-phy:
+    type: boolean
+    description: Use external PHY
+
+  reset-gpios:
+    maxItems: 1
+
+  vcc-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
+  - $ref: /schemas/net/ethernet-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    ethernet@a8000000 {
+        compatible = "davicom,dm9000";
+        reg = <0xa8000000 0x2>, <0xa8000002 0x2>;
+        interrupt-parent = <&gph1>;
+        interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+        local-mac-address = [00 00 de ad be ef];
+        davicom,no-eeprom;
+    };
diff --git a/Documentation/devicetree/bindings/net/davicom-dm9000.txt b/Documentation/devicetree/bindings/net/davicom-dm9000.txt
deleted file mode 100644
index 64c159e9cbf7..000000000000
--- a/Documentation/devicetree/bindings/net/davicom-dm9000.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Davicom DM9000 Fast Ethernet controller
-
-Required properties:
-- compatible = "davicom,dm9000";
-- reg : physical addresses and sizes of registers, must contain 2 entries:
-    first entry : address register,
-    second entry : data register.
-- interrupts : interrupt specifier specific to interrupt controller
-
-Optional properties:
-- davicom,no-eeprom : Configuration EEPROM is not available
-- davicom,ext-phy : Use external PHY
-- reset-gpios : phandle of gpio that will be used to reset chip during probe
-- vcc-supply : phandle of regulator that will be used to enable power to chip
-
-Example:
-
-	ethernet@18000000 {
-		compatible = "davicom,dm9000";
-		reg = <0x18000000 0x2 0x18000004 0x2>;
-		interrupt-parent = <&gpn>;
-		interrupts = <7 4>;
-		local-mac-address = [00 00 de ad be ef];
-		davicom,no-eeprom;
-		reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>;
-		vcc-supply = <&eth0_power>;
-	};
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
index eab21bb2050a..d80bbedfe3aa 100644
--- a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
@@ -12,7 +12,7 @@ maintainers:
   - Jianxin Pan <jianxin.pan@amlogic.com>
 
 description: |+
-  Secure Power Domains used in Meson A1/C1/S4 SoCs, and should be the child node
+  Secure Power Domains used in Meson A1/C1/S4 & C3 SoCs, and should be the child node
   of secure-monitor.
 
 properties:
@@ -20,6 +20,7 @@ properties:
     enum:
       - amlogic,meson-a1-pwrc
       - amlogic,meson-s4-pwrc
+      - amlogic,c3-pwrc
 
   "#power-domain-cells":
     const: 1
diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
index f9c211a9a938..9b03c41d3604 100644
--- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
+++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
@@ -41,6 +41,7 @@ properties:
       - qcom,sdm845-rpmhpd
       - qcom,sdx55-rpmhpd
       - qcom,sdx65-rpmhpd
+      - qcom,sdx75-rpmhpd
       - qcom,sm6115-rpmpd
       - qcom,sm6125-rpmpd
       - qcom,sm6350-rpmhpd
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
index 7b43ad3daa56..e78a89c9ec41 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
@@ -14,9 +14,6 @@ description:
   related to the remote processor.
 
 properties:
-  $nodename:
-    const: glink-edge
-
   apr:
     $ref: /schemas/soc/qcom/qcom,apr.yaml#
     required:
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml
index f5a044e20c4e..884158bccd50 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml
@@ -84,7 +84,7 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    rpm-glink {
+    glink-edge {
         compatible = "qcom,glink-rpm";
         interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
         mboxes = <&apcs_glb 0>;
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,rpm-proc.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,rpm-proc.yaml
new file mode 100644
index 000000000000..7afafde17a38
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,rpm-proc.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,rpm-proc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Resource Power Manager (RPM) Processor/Subsystem
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description: |
+  Resource Power Manager (RPM) subsystem found in various Qualcomm platforms:
+
+                  +--------------------------------------------+
+                  |       RPM subsystem (qcom,rpm-proc)        |
+                  |                                            |
+            reset | +---------------+     +-----+  +-----+     |
+          --------->|               |     | MPM |  | CPR | ... |
+   IPC interrupts | | ARM Cortex-M3 |---  +-----+  +-----+     |
+  ----------------->|               |  |     |        |        |
+                  | +---------------+  |---------------------- |
+                  | +---------------+  |                       |
+                  | |   Code RAM    |--|  +------------------+ |
+                  | +---------------+  |  |                  | |
+                  | +---------------+  |--|   Message RAM    | |
+                  | |   Data RAM    |--|  |                  | |
+                  | +---------------+  |  +------------------+ |
+                  +--------------------|-----------------------+
+                                       v
+                                      NoC
+
+  The firmware running on the processor inside the RPM subsystem allows each
+  component in the system to vote for state of the system resources, such as
+  clocks, regulators and bus frequencies. It implements multiple separate
+  communication interfaces that are described in subnodes, e.g. SMD and MPM:
+
+             +------------------------------+
+             |        ARM Cortex-M3         |
+             |                              |   +------------------------------+
+             | +--------------------------+ |   |          Message RAM         |
+             | |  RPM firmware            | |   |                              |
+   IPC IRQ 0 | | +----------------------+ | |   | +--------------------------+ |
+  -------------->| SMD server           |<------->| SMD data structures      | |
+             | | | +--------------+     | | |   | | +--------------+         | |
+             | | | | rpm_requests | ... | | |   | | | rpm_requests |   ...   | |
+             | | | +--------------+     | | |   | | +--------------+         | |
+   IPC IRQ 1 | | +----------------------+ | |   | +--------------------------+ |
+  -------------->| MPM virtualization   |<--------| MPM register copy (vMPM) | |
+             | | +----------------------+ | |   | +--------------------------+ |
+             | |           ...      |     | |   |              ...             |
+             | +--------------------|-----+ |   +------------------------------+
+             +----------------------|-------+
+                                    v
+                             +--------------+
+                             | MPM Hardware |
+                             +--------------+
+
+  The services provided by the firmware are only available after the firmware
+  has been loaded and the processor has been released from reset. Usually this
+  happens early in the boot process before the operating system is started.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,apq8084-rpm-proc
+          - qcom,ipq6018-rpm-proc
+          - qcom,ipq9574-rpm-proc
+          - qcom,mdm9607-rpm-proc
+          - qcom,msm8226-rpm-proc
+          - qcom,msm8610-rpm-proc
+          - qcom,msm8909-rpm-proc
+          - qcom,msm8916-rpm-proc
+          - qcom,msm8917-rpm-proc
+          - qcom,msm8936-rpm-proc
+          - qcom,msm8937-rpm-proc
+          - qcom,msm8952-rpm-proc
+          - qcom,msm8953-rpm-proc
+          - qcom,msm8974-rpm-proc
+          - qcom,msm8976-rpm-proc
+          - qcom,msm8994-rpm-proc
+          - qcom,msm8996-rpm-proc
+          - qcom,msm8998-rpm-proc
+          - qcom,qcm2290-rpm-proc
+          - qcom,qcs404-rpm-proc
+          - qcom,sdm660-rpm-proc
+          - qcom,sm6115-rpm-proc
+          - qcom,sm6125-rpm-proc
+          - qcom,sm6375-rpm-proc
+      - const: qcom,rpm-proc
+
+  smd-edge:
+    $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
+    description:
+      Qualcomm Shared Memory subnode which represents communication edge,
+      channels and devices related to the RPM subsystem.
+
+  glink-edge:
+    $ref: /schemas/remoteproc/qcom,glink-rpm-edge.yaml#
+    description:
+      Qualcomm G-Link subnode which represents communication edge,
+      channels and devices related to the RPM subsystem.
+
+  interrupt-controller:
+    type: object
+    $ref: /schemas/interrupt-controller/qcom,mpm.yaml#
+    description:
+      MSM Power Manager (MPM) interrupt controller that monitors interrupts
+      when the system is asleep.
+
+  master-stats:
+    $ref: /schemas/soc/qcom/qcom,rpm-master-stats.yaml#
+    description:
+      Subsystem-level low-power mode statistics provided by RPM.
+
+required:
+  - compatible
+
+oneOf:
+  - required:
+      - smd-edge
+  - required:
+      - glink-edge
+
+additionalProperties: false
+
+examples:
+  # SMD
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    remoteproc {
+      compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc";
+
+      smd-edge {
+        interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+        qcom,ipc = <&apcs 8 0>;
+        qcom,smd-edge = <15>;
+
+        rpm-requests {
+          compatible = "qcom,rpm-msm8916";
+          qcom,smd-channels = "rpm_requests";
+          /* ... */
+        };
+      };
+    };
+  # GLINK
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    remoteproc {
+      compatible = "qcom,qcm2290-rpm-proc", "qcom,rpm-proc";
+
+      glink-edge {
+        compatible = "qcom,glink-rpm";
+        interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+        qcom,rpm-msg-ram = <&rpm_msg_ram>;
+        mboxes = <&apcs_glb 0>;
+
+        rpm-requests {
+          compatible = "qcom,rpm-qcm2290";
+          qcom,glink-channels = "rpm_requests";
+          /* ... */
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml
index af24f9a3cdf1..9a04d192e7e4 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml
@@ -139,7 +139,7 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/mailbox/qcom-ipcc.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     remoteproc@30000000 {
         compatible = "qcom,sm8450-adsp-pas";
@@ -160,8 +160,8 @@ examples:
 
         memory-region = <&adsp_mem>;
 
-        power-domains = <&rpmhpd SM8450_LCX>,
-                        <&rpmhpd SM8450_LMX>;
+        power-domains = <&rpmhpd RPMHPD_LCX>,
+                        <&rpmhpd RPMHPD_LMX>;
         power-domain-names = "lcx", "lmx";
 
         qcom,qmp = <&aoss_qmp>;
diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml
index 0d50f6a54af3..49db66801429 100644
--- a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml
@@ -32,6 +32,7 @@ properties:
     enum:
       - xlnx,zynqmp-reset
       - xlnx,versal-reset
+      - xlnx,versal-net-reset
 
   "#reset-cells":
     const: 1
diff --git a/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml
new file mode 100644
index 000000000000..da2dcfeebf12
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/loongson/loongson,ls2k-pmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-2 Power Manager controller
+
+maintainers:
+  - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - loongson,ls2k0500-pmc
+          - loongson,ls2k1000-pmc
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  loongson,suspend-address:
+    $ref: /schemas/types.yaml#/definitions/uint64
+    description:
+      The "loongson,suspend-address" is a deep sleep state (Suspend To
+      RAM) firmware entry address which was jumped from kernel and it's
+      value was dependent on specific platform firmware code. In
+      addition, the PM need according to it to indicate that current
+      SoC whether support Suspend To RAM.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    power-management@1fe27000 {
+        compatible = "loongson,ls2k1000-pmc", "syscon";
+        reg = <0x1fe27000 0x58>;
+        interrupt-parent = <&liointc1>;
+        interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+        loongson,suspend-address = <0x0 0x1c000500>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
index 65c02a7fef80..2fa725b8af5d 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
@@ -34,22 +34,27 @@ properties:
       - qcom,rpm-apq8084
       - qcom,rpm-ipq6018
       - qcom,rpm-ipq9574
+      - qcom,rpm-mdm9607
       - qcom,rpm-msm8226
+      - qcom,rpm-msm8610
       - qcom,rpm-msm8909
       - qcom,rpm-msm8916
+      - qcom,rpm-msm8917
       - qcom,rpm-msm8936
+      - qcom,rpm-msm8937
+      - qcom,rpm-msm8952
       - qcom,rpm-msm8953
       - qcom,rpm-msm8974
       - qcom,rpm-msm8976
       - qcom,rpm-msm8994
       - qcom,rpm-msm8996
       - qcom,rpm-msm8998
+      - qcom,rpm-qcm2290
+      - qcom,rpm-qcs404
       - qcom,rpm-sdm660
       - qcom,rpm-sm6115
       - qcom,rpm-sm6125
       - qcom,rpm-sm6375
-      - qcom,rpm-qcm2290
-      - qcom,rpm-qcs404
 
   clock-controller:
     $ref: /schemas/clock/qcom,rpmcc.yaml#
@@ -81,12 +86,18 @@ if:
       contains:
         enum:
           - qcom,rpm-apq8084
+          - qcom,rpm-mdm9607
           - qcom,rpm-msm8226
+          - qcom,rpm-msm8610
+          - qcom,rpm-msm8909
           - qcom,rpm-msm8916
+          - qcom,rpm-msm8917
           - qcom,rpm-msm8936
+          - qcom,rpm-msm8937
+          - qcom,rpm-msm8952
+          - qcom,rpm-msm8953
           - qcom,rpm-msm8974
           - qcom,rpm-msm8976
-          - qcom,rpm-msm8953
           - qcom,rpm-msm8994
 then:
   properties:
@@ -109,10 +120,10 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    smd {
-        compatible = "qcom,smd";
+    remoteproc {
+        compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc";
 
-        rpm {
+        smd-edge {
             interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
             qcom,ipc = <&apcs 8 0>;
             qcom,smd-edge = <15>;
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
index 063e595c12f7..4819ce90d206 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
@@ -15,6 +15,12 @@ description:
   The Qualcomm Shared Memory Driver is a FIFO based communication channel for
   sending data between the various subsystems in Qualcomm platforms.
 
+  Using the top-level SMD node is deprecated. Instead, the SMD edges are defined
+  directly below the device node representing the respective remote subsystem
+  or remote processor.
+
+deprecated: true
+
 properties:
   compatible:
     const: qcom,smd
@@ -37,6 +43,7 @@ examples:
   # The following example represents a smd node, with one edge representing the
   # "rpm" subsystem. For the "rpm" subsystem we have a device tied to the
   # "rpm_request" channel.
+  # NOTE: This is deprecated, represent the RPM using "qcom,rpm-proc" instead.
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
diff --git a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
index 4bbf6db0b6bd..61c784ef7b51 100644
--- a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
+++ b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
@@ -15,7 +15,9 @@ description: |
 
 properties:
   compatible:
-    const: qcom,msm8974-ocmem
+    enum:
+      - qcom,msm8226-ocmem  # v1.1.0
+      - qcom,msm8974-ocmem  # v1.4.0
 
   reg:
     items:
@@ -28,11 +30,13 @@ properties:
       - const: mem
 
   clocks:
+    minItems: 1
     items:
       - description: Core clock
       - description: Interface clock
 
   clock-names:
+    minItems: 1
     items:
       - const: core
       - const: iface
@@ -58,6 +62,26 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8974-ocmem
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          minItems: 2
+    else:
+      properties:
+        clocks:
+          minItems: 1
+        clock-names:
+          minItems: 1
+
 patternProperties:
   "-sram@[0-9a-f]+$":
     type: object