summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-09-03 22:37:57 +0400
committerLinus Torvalds <torvalds@linux-foundation.org>2013-09-03 22:37:57 +0400
commit751144271f4b63d5de9005ea4e5e6e5c7c6fd629 (patch)
tree2e5cb8223d4f6146f01f123a9f33cf6d468205c6 /Documentation/devicetree
parent542a086ac72fb193cbc1b996963a572269e57743 (diff)
parent91121c103ae93ef117e58712786864270d7f488e (diff)
downloadlinux-751144271f4b63d5de9005ea4e5e6e5c7c6fd629.tar.xz
Merge tag 'staging-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree merge from Greg KH: "Here's the bit staging tree pull request for 3.12-rc1. Lots of staging driver updates, and fixes. Lustre is finally enabled in the build, and lots of cleanup started happening in it. There's a new wireless driver in here, and 2 new TTY drivers, which cause the overall lines added/removed to be quite large on the "added" side. The IIO driver updates are also coming through here, as they are tied to the staging iio drivers" * tag 'staging-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (942 commits) staging: dwc2: make dwc2_core_params documentation more complete staging: dwc2: validate the value for phy_utmi_width staging: dwc2: interpret all hwcfg and related register at init time staging: dwc2: properly mask the GRXFSIZ register staging: dwc2: remove redundant register reads staging: dwc2: re-use hptxfsiz variable staging: dwc2: simplify debug output in dwc_hc_init staging: dwc2: add missing shift staging: dwc2: simplify register shift expressions staging: dwc2: only read the snpsid register once staging: dwc2: unshift non-bool register value constants staging: dwc2: fix off-by-one in check for max_packet_count parameter staging: dwc2: remove specific fifo size constants Staging:BCM:DDRInit.c:Renaming __FUNCTION__ staging: bcm: remove Version.h file. staging: rtl8188eu: off by one in rtw_set_802_11_add_wep() staging: r8188eu: copying one byte too much staging: rtl8188eu: || vs && typo staging: r8188eu: off by one bugs staging: crystalhd: Resolve sparse 'different base types' warnings. ...
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/arm/atmel-adc.txt7
-rw-r--r--Documentation/devicetree/bindings/iio/accel/bma180.txt24
-rw-r--r--Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt18
-rw-r--r--Documentation/devicetree/bindings/iio/light/apds9300.txt22
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt1
5 files changed, 67 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/arm/atmel-adc.txt b/Documentation/devicetree/bindings/arm/atmel-adc.txt
index 16769d9cedd6..723c205cb10d 100644
--- a/Documentation/devicetree/bindings/arm/atmel-adc.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-adc.txt
@@ -1,18 +1,15 @@
* AT91's Analog to Digital Converter (ADC)
Required properties:
- - compatible: Should be "atmel,at91sam9260-adc"
+ - compatible: Should be "atmel,<chip>-adc"
+ <chip> can be "at91sam9260", "at91sam9g45" or "at91sam9x5"
- reg: Should contain ADC registers location and length
- interrupts: Should contain the IRQ line for the ADC
- - atmel,adc-channel-base: Offset of the first channel data register
- atmel,adc-channels-used: Bitmask of the channels muxed and enable for this
device
- - atmel,adc-drdy-mask: Mask of the DRDY interruption in the ADC
- atmel,adc-num-channels: Number of channels available in the ADC
- atmel,adc-startup-time: Startup Time of the ADC in microseconds as
defined in the datasheet
- - atmel,adc-status-register: Offset of the Interrupt Status Register
- - atmel,adc-trigger-register: Offset of the Trigger Register
- atmel,adc-vref: Reference voltage in millivolts for the conversions
- atmel,adc-res: List of resolution in bits supported by the ADC. List size
must be two at least.
diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt
new file mode 100644
index 000000000000..c5933573e0f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/bma180.txt
@@ -0,0 +1,24 @@
+* Bosch BMA180 triaxial acceleration sensor
+
+http://omapworld.com/BMA180_111_1002839.pdf
+
+Required properties:
+
+ - compatible : should be "bosch,bma180"
+ - reg : the I2C address of the sensor
+
+Optional properties:
+
+ - interrupt-parent : should be the phandle for the interrupt controller
+
+ - interrupts : interrupt mapping for GPIO IRQ, it should by configured with
+ flags IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING
+
+Example:
+
+bma180@40 {
+ compatible = "bosch,bma180";
+ reg = <0x40>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+};
diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt b/Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt
new file mode 100644
index 000000000000..e9582e6fe350
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt
@@ -0,0 +1,18 @@
+* Nuvoton NAU7802 Analog to Digital Converter (ADC)
+
+Required properties:
+ - compatible: Should be "nuvoton,nau7802"
+ - reg: Should contain the ADC I2C address
+
+Optional properties:
+ - nuvoton,vldo: Internal reference voltage in millivolts to be
+ configured valid values are between 2400 mV and 4500 mV.
+ - interrupts: IRQ line for the ADC. If not used the driver will use
+ polling.
+
+Example:
+adc2: nau7802@2a {
+ compatible = "nuvoton,nau7802";
+ reg = <0x2a>;
+ nuvoton,vldo = <3000>;
+};
diff --git a/Documentation/devicetree/bindings/iio/light/apds9300.txt b/Documentation/devicetree/bindings/iio/light/apds9300.txt
new file mode 100644
index 000000000000..d6f66c73ddbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/apds9300.txt
@@ -0,0 +1,22 @@
+* Avago APDS9300 ambient light sensor
+
+http://www.avagotech.com/docs/AV02-1077EN
+
+Required properties:
+
+ - compatible : should be "avago,apds9300"
+ - reg : the I2C address of the sensor
+
+Optional properties:
+
+ - interrupt-parent : should be the phandle for the interrupt controller
+ - interrupts : interrupt mapping for GPIO IRQ
+
+Example:
+
+apds9300@39 {
+ compatible = "avago,apds9300";
+ reg = <0x39>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <29 8>;
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 366ce9b87240..ec4d713674fa 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -11,6 +11,7 @@ amcc Applied Micro Circuits Corporation (APM, formally AMCC)
apm Applied Micro Circuits Corporation (APM)
arm ARM Ltd.
atmel Atmel Corporation
+avago Avago Technologies
bosch Bosch Sensortec GmbH
brcm Broadcom Corporation
cavium Cavium, Inc.