Merge tag 'thermal-v6.6-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Merge ARM and related thermal control updates for 6.6-rc1 from Daniel
Lezcano:

"- Check if the Tegra BPMP supports the trip points in order to set the
   .set_trips callback (Mikko Perttunen)

 - Add the new Loongson-2 thermal sensor along with the DT bindings
   (Yinbo Zhu)

 - Use IS_ERR_OR_NULL helper to replace a double test on the TI bandgap
   sensor (Li Zetao)

 - Remove the call to platform_set_drvdata() as there is no call to
   platform_get_drvdata() in a bunch of drivers where that happens
   (Andrei Coardos)

 - Switch the Mediatek LVTS mode to filtered in order to enable the
   interrupts (Nícolas F. R. A. Prado)

 - Fix Wvoid-pointer-to-enum-cast warning on the Exynos TMU (Krzysztof
   Kozlowski)

 - Remove redundant usage of of_match_ptr() as the driver db8500
   already depends on CONFIG_OF (Ruan Jinjie)

 - Remove redundant dev_err_probe() because the underlying function
   already called it in the Mediatek sensor (Chen Jiahao)

 - Free calibration nvmem after reading it on sun8i (Mark Brown)

 - Remove useless comment in the code on sun8i (Yangtao Li)

 - Make tsens_xxxx_nvmem static to fix sparse warning on QCom tsens (Min-Hua Chen)

 - Remove error message at probe deferral on imx8mm (Ahmad Fatoum)

 - Fix parameter check in lvts_debugfs_init with IS_ERR on Mediatek
   LVTS (Minjie Du)

 - Fix the interrupt routine and configuratoin for the Mediatek LVTS
   (Nícolas F. R. A. Prado)"

* tag 'thermal-v6.6-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (27 commits)
  thermal/drivers/tegra-bpmp: Check if BPMP supports trip points
  thermal: dt-bindings: add loongson-2 thermal
  thermal/drivers/loongson-2: Add thermal management support
  thermal/drivers/ti-soc-thermal: Use helper function IS_ERR_OR_NULL()
  thermal/drivers/generic-adc: Removed unneeded call to platform_set_drvdata()
  thermal/drivers/max77620_thermal: Removed unneeded call to platform_set_drvdata()
  thermal/drivers/mediatek/auxadc_thermal: Removed call to platform_set_drvdata()
  thermal/drivers/sun8i_thermal: Remove unneeded call to platform_set_drvdata()
  thermal/drivers/broadcom/brcstb_thermal: Removed unneeded platform_set_drvdata()
  thermal/drivers/mediatek/lvts_thermal: Make readings valid in filtered mode
  thermal/drivers/k3_bandgap: Remove unneeded call to platform_set_drvdata()
  thermal/drivers/k3_j72xx_bandgap: Removed unneeded call to platform_set_drvdata()
  thermal/drivers/broadcom/sr-thermal: Removed call to platform_set_drvdata()
  thermal/drivers/samsung: Fix Wvoid-pointer-to-enum-cast warning
  thermal/drivers/db8500: Remove redundant of_match_ptr()
  thermal/drivers/mediatek: Clean up redundant dev_err_probe()
  thermal/drivers/sun8i: Free calibration nvmem after reading it
  thermal/drivers/sun8i: Remove unneeded comments
  thermal/drivers/tsens: Make tsens_xxxx_nvmem static
  thermal/drivers/imx8mm: Suppress log message on probe deferral
  ...

1 files changed, 44 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
new file mode 100644
index 000000000000..7538469997f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/loongson,ls2k-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Thermal sensors on Loongson-2 SoCs
+
+maintainers:
+  - zhanghongchen <zhanghongchen@loongson.cn>
+  - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - loongson,ls2k1000-thermal
+      - items:
+          - enum:
+              - loongson,ls2k2000-thermal
+          - const: loongson,ls2k1000-thermal
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    thermal: thermal-sensor@1fe01500 {
+        compatible = "loongson,ls2k1000-thermal";
+        reg = <0x1fe01500 0x30>;
+        interrupt-parent = <&liointc0>;
+        interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+    };