Merge tag 'thermal-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull thermal control updates from Rafael Wysocki:
 "These further rework the ACPI thermal driver, after the changes made
  to it in the previous cycle, to make it easier to grasp, get rid of
  redundant pieces of internal data structures and eliminate its
  reliance on a specific ordering of trip point objects in the thermal
  core, make thermal core adjustments needed for the ACPI thermal driver
  rework, modify the thermal governor interface so as to use trip
  pointers for representing trip points in it, switch over multiple
  thermal drivers to using void platform driver remove callbacks, add
  support for 2 hardware features to the Intel int340x thermal driver,
  add support for new hardware on ARM platforms, update documentation,
  fix problems, clean up code and update the MAINTAINERS record for
  thermal control.

  Specifics:

   - Untangle the initialization and updates of passive and active trip
     points in the ACPI thermal driver (Rafael Wysocki)

   - Reduce code duplication related to the initialization and updates
     of trip points in the ACPI thermal driver (Rafael Wysocki)

   - Use trip pointers for cooling device binding in the ACPI thermal
     driver (Rafael Wysocki)

   - Simplify critical and hot trips representation in the ACPI thermal
     driver (Rafael Wysocki)

   - Use trip pointers in thermal governors and in the related part of
     the thermal core (Rafael Wysocki)

   - Drop the trips_disabled bitmask that has become redundant from the
     thermal core (Rafael Wysocki)

   - Avoid updating trip points when the thermal zone temperature falls
     into a trip point's hysteresis range (ícolas F. R. A. Prado)

   - Add power floor notifications support to the int340x thermal
     control driver (Srinivas Pandruvada)

   - Rework updating trip points in the int340x thermal driver so that
     it does not access thermal zone internals directly (Rafael
     Wysocki)

   - Use param_get_byte() instead of param_get_int() as the max_idle
     module parameter .get() callback in the Intel powerclamp thermal
     driver to avoid possible out-of-bounds access (David Arcari)

   - Add workload hints support to the int340x thermal driver (Srinivas
     Pandruvada)

   - Add support for Mediatek LVTS MT8192 along with suspend/resume
     routines (Balsam Chihi)

   - Fix probe for THERMAL_V2 in the Mediatek LVTS driver (Markus
     Schneider-Pargmann)

   - Remove duplicate error message from the max76620 driver when
     thermal_of_zone_register() fails (Thierry Reding)

   - Add i.MX7D compatible bindings to fix a warning from dtbs_check for
     the imx6ul platform (Alexander Stein)

   - Add sa8775p compatible to the QCom tsens driver (Priyansh Jain)

   - Fix error check in lvts_debugfs_init() to be against PTR_ERR() in
     the LVTS Mediatek driver (Minjie Du)

   - Remove unused variable in thermal/tools (Kuan-Wei Chiu)

   - Document the imx8dl thermal sensor (Fabio Estevam)

   - Add variable names in callback prototypes to prevent warning from
     checkpatch.pl in the imx8mm driver (Bragatheswaran Manickavel)

   - Add missing unevaluatedProperties on child node schemas for
     tegra124 (Rob Herring)

   - Add mt7988 support to the Mediatek LVTS driver (Frank Wunderlich)"

* tag 'thermal-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (111 commits)
  thermal: ACPI: Include the right header file
  thermal: core: Don't update trip points inside the hysteresis range
  thermal: core: Pass trip pointer to governor throttle callback
  thermal: gov_step_wise: Fold update_passive_instance() into its caller
  thermal: gov_power_allocator: Use trip pointers instead of trip indices
  thermal: gov_fair_share: Rearrange get_trip_level()
  thermal: trip: Define for_each_trip() macro
  thermal: trip: Simplify computing trip indices
  thermal/qcom/tsens: Drop ops_v0_1
  thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation
  thermal/drivers/mediatek/lvts_thermal: Add mt8192 support
  thermal/drivers/mediatek/lvts_thermal: Add suspend and resume
  dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for mt8192
  thermal/drivers/mediatek: Fix probe for THERMAL_V2
  thermal/drivers/max77620: Remove duplicate error message
  dt-bindings: timer: add imx7d compatible
  dt-bindings: net: microchip: Allow nvmem-cell usage
  dt-bindings: imx-thermal: Add #thermal-sensor-cells property
  dt-bindings: thermal: tsens: Add sa8775p compatible
  thermal/drivers/mediatek/lvts_thermal: Fix error check in lvts_debugfs_init()
  ...

1 files changed, 64 insertions, 0 deletions

diff --git a/Documentation/driver-api/thermal/intel_dptf.rst b/Documentation/driver-api/thermal/intel_dptf.rst
index 9ab4316322a1..8fb8c5b2d685 100644
--- a/Documentation/driver-api/thermal/intel_dptf.rst
+++ b/Documentation/driver-api/thermal/intel_dptf.rst
@@ -164,6 +164,16 @@ ABI.
 ``power_limit_1_tmax_us`` (RO)
 	Maximum powercap sysfs constraint_1_time_window_us for Intel RAPL
 
+``power_floor_status`` (RO)
+	When set to 1, the power floor of the system in the current
+	configuration has been reached.  It needs to be reconfigured to allow
+	power to be reduced any further.
+
+``power_floor_enable`` (RW)
+	When set to 1, enable reading and notification of the power floor
+	status. Notifications are triggered for the power_floor_status
+	attribute value changes.
+
 :file:`/sys/bus/pci/devices/0000\:00\:04.0/`
 
 ``tcc_offset_degree_celsius`` (RW)
@@ -315,3 +325,57 @@ DPTF Fan Control
 ----------------------------------------
 
 Refer to Documentation/admin-guide/acpi/fan_performance_states.rst
+
+Workload Type Hints
+----------------------------------------
+
+The firmware in Meteor Lake processor generation is capable of identifying
+workload type and passing hints regarding it to the OS. A special sysfs
+interface is provided to allow user space to obtain workload type hints from
+the firmware and control the rate at which they are provided.
+
+User space can poll attribute "workload_type_index" for the current hint or
+can receive a notification whenever the value of this attribute is updated.
+
+file:`/sys/bus/pci/devices/0000:00:04.0/workload_hint/`
+Segment 0, bus 0, device 4, function 0 is reserved for the processor thermal
+device on all Intel client processors. So, the above path doesn't change
+based on the processor generation.
+
+``workload_hint_enable`` (RW)
+	Enable firmware to send workload type hints to user space.
+
+``notification_delay_ms`` (RW)
+	Minimum delay in milliseconds before firmware will notify OS. This is
+	for the rate control of notifications. This delay is between changing
+	the workload type prediction in the firmware and notifying the OS about
+	the change. The default delay is 1024 ms. The delay of 0 is invalid.
+	The delay is rounded up to the nearest power of 2 to simplify firmware
+	programming of the delay value. The read of notification_delay_ms
+	attribute shows the effective value used.
+
+``workload_type_index`` (RO)
+	Predicted workload type index. User space can get notification of
+	change via existing sysfs attribute change notification mechanism.
+
+	The supported index values and their meaning for the Meteor Lake
+	processor generation are as follows:
+
+	0 -  Idle: System performs no tasks, power and idle residency are
+		consistently low for long periods of time.
+
+	1 – Battery Life: Power is relatively low, but the processor may
+		still be actively performing a task, such as video playback for
+		a long period of time.
+
+	2 – Sustained: Power level that is relatively high for a long period
+		of time, with very few to no periods of idleness, which will
+		eventually exhaust RAPL Power Limit 1 and 2.
+
+	3 – Bursty: Consumes a relatively constant average amount of power, but
+		periods of relative idleness are interrupted by bursts of
+		activity. The bursts are relatively short and the periods of
+		relative idleness between them typically prevent RAPL Power
+		Limit 1 from being exhausted.
+
+	4 – Unknown: Can't classify.