diff options
author | Mauro Carvalho Chehab <mchehab+samsung@kernel.org> | 2019-07-26 15:51:14 +0300 |
---|---|---|
committer | Jonathan Corbet <corbet@lwn.net> | 2019-07-31 22:25:22 +0300 |
commit | 09f4c750a8c7d1fc0b7bb3a7aa1de55de897a375 (patch) | |
tree | 2e13561e383ae9170b2351c458806aeab2fe445f /Documentation/filesystems/ubifs-authentication.md | |
parent | eaf7b46083a7e341a23ab3d6042e0ccc115b0914 (diff) | |
download | linux-09f4c750a8c7d1fc0b7bb3a7aa1de55de897a375.tar.xz |
docs: ubifs-authentication.md: convert to ReST
The documentation standard is ReST and not markdown.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Diffstat (limited to 'Documentation/filesystems/ubifs-authentication.md')
-rw-r--r-- | Documentation/filesystems/ubifs-authentication.md | 426 |
1 files changed, 0 insertions, 426 deletions
diff --git a/Documentation/filesystems/ubifs-authentication.md b/Documentation/filesystems/ubifs-authentication.md deleted file mode 100644 index 23e698167141..000000000000 --- a/Documentation/filesystems/ubifs-authentication.md +++ /dev/null @@ -1,426 +0,0 @@ -% UBIFS Authentication -% sigma star gmbh -% 2018 - -# Introduction - -UBIFS utilizes the fscrypt framework to provide confidentiality for file -contents and file names. This prevents attacks where an attacker is able to -read contents of the filesystem on a single point in time. A classic example -is a lost smartphone where the attacker is unable to read personal data stored -on the device without the filesystem decryption key. - -At the current state, UBIFS encryption however does not prevent attacks where -the attacker is able to modify the filesystem contents and the user uses the -device afterwards. In such a scenario an attacker can modify filesystem -contents arbitrarily without the user noticing. One example is to modify a -binary to perform a malicious action when executed [DMC-CBC-ATTACK]. Since -most of the filesystem metadata of UBIFS is stored in plain, this makes it -fairly easy to swap files and replace their contents. - -Other full disk encryption systems like dm-crypt cover all filesystem metadata, -which makes such kinds of attacks more complicated, but not impossible. -Especially, if the attacker is given access to the device multiple points in -time. For dm-crypt and other filesystems that build upon the Linux block IO -layer, the dm-integrity or dm-verity subsystems [DM-INTEGRITY, DM-VERITY] -can be used to get full data authentication at the block layer. -These can also be combined with dm-crypt [CRYPTSETUP2]. - -This document describes an approach to get file contents _and_ full metadata -authentication for UBIFS. Since UBIFS uses fscrypt for file contents and file -name encryption, the authentication system could be tied into fscrypt such that -existing features like key derivation can be utilized. It should however also -be possible to use UBIFS authentication without using encryption. - - -## MTD, UBI & UBIFS - -On Linux, the MTD (Memory Technology Devices) subsystem provides a uniform -interface to access raw flash devices. One of the more prominent subsystems that -work on top of MTD is UBI (Unsorted Block Images). It provides volume management -for flash devices and is thus somewhat similar to LVM for block devices. In -addition, it deals with flash-specific wear-leveling and transparent I/O error -handling. UBI offers logical erase blocks (LEBs) to the layers on top of it -and maps them transparently to physical erase blocks (PEBs) on the flash. - -UBIFS is a filesystem for raw flash which operates on top of UBI. Thus, wear -leveling and some flash specifics are left to UBI, while UBIFS focuses on -scalability, performance and recoverability. - - - - +------------+ +*******+ +-----------+ +-----+ - | | * UBIFS * | UBI-BLOCK | | ... | - | JFFS/JFFS2 | +*******+ +-----------+ +-----+ - | | +-----------------------------+ +-----------+ +-----+ - | | | UBI | | MTD-BLOCK | | ... | - +------------+ +-----------------------------+ +-----------+ +-----+ - +------------------------------------------------------------------+ - | MEMORY TECHNOLOGY DEVICES (MTD) | - +------------------------------------------------------------------+ - +-----------------------------+ +--------------------------+ +-----+ - | NAND DRIVERS | | NOR DRIVERS | | ... | - +-----------------------------+ +--------------------------+ +-----+ - - Figure 1: Linux kernel subsystems for dealing with raw flash - - - -Internally, UBIFS maintains multiple data structures which are persisted on -the flash: - -- *Index*: an on-flash B+ tree where the leaf nodes contain filesystem data -- *Journal*: an additional data structure to collect FS changes before updating - the on-flash index and reduce flash wear. -- *Tree Node Cache (TNC)*: an in-memory B+ tree that reflects the current FS - state to avoid frequent flash reads. It is basically the in-memory - representation of the index, but contains additional attributes. -- *LEB property tree (LPT)*: an on-flash B+ tree for free space accounting per - UBI LEB. - -In the remainder of this section we will cover the on-flash UBIFS data -structures in more detail. The TNC is of less importance here since it is never -persisted onto the flash directly. More details on UBIFS can also be found in -[UBIFS-WP]. - - -### UBIFS Index & Tree Node Cache - -Basic on-flash UBIFS entities are called *nodes*. UBIFS knows different types -of nodes. Eg. data nodes (`struct ubifs_data_node`) which store chunks of file -contents or inode nodes (`struct ubifs_ino_node`) which represent VFS inodes. -Almost all types of nodes share a common header (`ubifs_ch`) containing basic -information like node type, node length, a sequence number, etc. (see -`fs/ubifs/ubifs-media.h`in kernel source). Exceptions are entries of the LPT -and some less important node types like padding nodes which are used to pad -unusable content at the end of LEBs. - -To avoid re-writing the whole B+ tree on every single change, it is implemented -as *wandering tree*, where only the changed nodes are re-written and previous -versions of them are obsoleted without erasing them right away. As a result, -the index is not stored in a single place on the flash, but *wanders* around -and there are obsolete parts on the flash as long as the LEB containing them is -not reused by UBIFS. To find the most recent version of the index, UBIFS stores -a special node called *master node* into UBI LEB 1 which always points to the -most recent root node of the UBIFS index. For recoverability, the master node -is additionally duplicated to LEB 2. Mounting UBIFS is thus a simple read of -LEB 1 and 2 to get the current master node and from there get the location of -the most recent on-flash index. - -The TNC is the in-memory representation of the on-flash index. It contains some -additional runtime attributes per node which are not persisted. One of these is -a dirty-flag which marks nodes that have to be persisted the next time the -index is written onto the flash. The TNC acts as a write-back cache and all -modifications of the on-flash index are done through the TNC. Like other caches, -the TNC does not have to mirror the full index into memory, but reads parts of -it from flash whenever needed. A *commit* is the UBIFS operation of updating the -on-flash filesystem structures like the index. On every commit, the TNC nodes -marked as dirty are written to the flash to update the persisted index. - - -### Journal - -To avoid wearing out the flash, the index is only persisted (*commited*) when -certain conditions are met (eg. `fsync(2)`). The journal is used to record -any changes (in form of inode nodes, data nodes etc.) between commits -of the index. During mount, the journal is read from the flash and replayed -onto the TNC (which will be created on-demand from the on-flash index). - -UBIFS reserves a bunch of LEBs just for the journal called *log area*. The -amount of log area LEBs is configured on filesystem creation (using -`mkfs.ubifs`) and stored in the superblock node. The log area contains only -two types of nodes: *reference nodes* and *commit start nodes*. A commit start -node is written whenever an index commit is performed. Reference nodes are -written on every journal update. Each reference node points to the position of -other nodes (inode nodes, data nodes etc.) on the flash that are part of this -journal entry. These nodes are called *buds* and describe the actual filesystem -changes including their data. - -The log area is maintained as a ring. Whenever the journal is almost full, -a commit is initiated. This also writes a commit start node so that during -mount, UBIFS will seek for the most recent commit start node and just replay -every reference node after that. Every reference node before the commit start -node will be ignored as they are already part of the on-flash index. - -When writing a journal entry, UBIFS first ensures that enough space is -available to write the reference node and buds part of this entry. Then, the -reference node is written and afterwards the buds describing the file changes. -On replay, UBIFS will record every reference node and inspect the location of -the referenced LEBs to discover the buds. If these are corrupt or missing, -UBIFS will attempt to recover them by re-reading the LEB. This is however only -done for the last referenced LEB of the journal. Only this can become corrupt -because of a power cut. If the recovery fails, UBIFS will not mount. An error -for every other LEB will directly cause UBIFS to fail the mount operation. - - - | ---- LOG AREA ---- | ---------- MAIN AREA ------------ | - - -----+------+-----+--------+---- ------+-----+-----+--------------- - \ | | | | / / | | | \ - / CS | REF | REF | | \ \ DENT | INO | INO | / - \ | | | | / / | | | \ - ----+------+-----+--------+--- -------+-----+-----+---------------- - | | ^ ^ - | | | | - +------------------------+ | - | | - +-------------------------------+ - - - Figure 2: UBIFS flash layout of log area with commit start nodes - (CS) and reference nodes (REF) pointing to main area - containing their buds - - -### LEB Property Tree/Table - -The LEB property tree is used to store per-LEB information. This includes the -LEB type and amount of free and *dirty* (old, obsolete content) space [1] on -the LEB. The type is important, because UBIFS never mixes index nodes with data -nodes on a single LEB and thus each LEB has a specific purpose. This again is -useful for free space calculations. See [UBIFS-WP] for more details. - -The LEB property tree again is a B+ tree, but it is much smaller than the -index. Due to its smaller size it is always written as one chunk on every -commit. Thus, saving the LPT is an atomic operation. - - -[1] Since LEBs can only be appended and never overwritten, there is a -difference between free space ie. the remaining space left on the LEB to be -written to without erasing it and previously written content that is obsolete -but can't be overwritten without erasing the full LEB. - - -# UBIFS Authentication - -This chapter introduces UBIFS authentication which enables UBIFS to verify -the authenticity and integrity of metadata and file contents stored on flash. - - -## Threat Model - -UBIFS authentication enables detection of offline data modification. While it -does not prevent it, it enables (trusted) code to check the integrity and -authenticity of on-flash file contents and filesystem metadata. This covers -attacks where file contents are swapped. - -UBIFS authentication will not protect against rollback of full flash contents. -Ie. an attacker can still dump the flash and restore it at a later time without -detection. It will also not protect against partial rollback of individual -index commits. That means that an attacker is able to partially undo changes. -This is possible because UBIFS does not immediately overwrites obsolete -versions of the index tree or the journal, but instead marks them as obsolete -and garbage collection erases them at a later time. An attacker can use this by -erasing parts of the current tree and restoring old versions that are still on -the flash and have not yet been erased. This is possible, because every commit -will always write a new version of the index root node and the master node -without overwriting the previous version. This is further helped by the -wear-leveling operations of UBI which copies contents from one physical -eraseblock to another and does not atomically erase the first eraseblock. - -UBIFS authentication does not cover attacks where an attacker is able to -execute code on the device after the authentication key was provided. -Additional measures like secure boot and trusted boot have to be taken to -ensure that only trusted code is executed on a device. - - -## Authentication - -To be able to fully trust data read from flash, all UBIFS data structures -stored on flash are authenticated. That is: - -- The index which includes file contents, file metadata like extended - attributes, file length etc. -- The journal which also contains file contents and metadata by recording changes - to the filesystem -- The LPT which stores UBI LEB metadata which UBIFS uses for free space accounting - - -### Index Authentication - -Through UBIFS' concept of a wandering tree, it already takes care of only -updating and persisting changed parts from leaf node up to the root node -of the full B+ tree. This enables us to augment the index nodes of the tree -with a hash over each node's child nodes. As a result, the index basically also -a Merkle tree. Since the leaf nodes of the index contain the actual filesystem -data, the hashes of their parent index nodes thus cover all the file contents -and file metadata. When a file changes, the UBIFS index is updated accordingly -from the leaf nodes up to the root node including the master node. This process -can be hooked to recompute the hash only for each changed node at the same time. -Whenever a file is read, UBIFS can verify the hashes from each leaf node up to -the root node to ensure the node's integrity. - -To ensure the authenticity of the whole index, the UBIFS master node stores a -keyed hash (HMAC) over its own contents and a hash of the root node of the index -tree. As mentioned above, the master node is always written to the flash whenever -the index is persisted (ie. on index commit). - -Using this approach only UBIFS index nodes and the master node are changed to -include a hash. All other types of nodes will remain unchanged. This reduces -the storage overhead which is precious for users of UBIFS (ie. embedded -devices). - - - +---------------+ - | Master Node | - | (hash) | - +---------------+ - | - v - +-------------------+ - | Index Node #1 | - | | - | branch0 branchn | - | (hash) (hash) | - +-------------------+ - | ... | (fanout: 8) - | | - +-------+ +------+ - | | - v v - +-------------------+ +-------------------+ - | Index Node #2 | | Index Node #3 | - | | | | - | branch0 branchn | | branch0 branchn | - | (hash) (hash) | | (hash) (hash) | - +-------------------+ +-------------------+ - | ... | ... | - v v v - +-----------+ +----------+ +-----------+ - | Data Node | | INO Node | | DENT Node | - +-----------+ +----------+ +-----------+ - - - Figure 3: Coverage areas of index node hash and master node HMAC - - - -The most important part for robustness and power-cut safety is to atomically -persist the hash and file contents. Here the existing UBIFS logic for how -changed nodes are persisted is already designed for this purpose such that -UBIFS can safely recover if a power-cut occurs while persisting. Adding -hashes to index nodes does not change this since each hash will be persisted -atomically together with its respective node. - - -### Journal Authentication - -The journal is authenticated too. Since the journal is continuously written -it is necessary to also add authentication information frequently to the -journal so that in case of a powercut not too much data can't be authenticated. -This is done by creating a continuous hash beginning from the commit start node -over the previous reference nodes, the current reference node, and the bud -nodes. From time to time whenever it is suitable authentication nodes are added -between the bud nodes. This new node type contains a HMAC over the current state -of the hash chain. That way a journal can be authenticated up to the last -authentication node. The tail of the journal which may not have a authentication -node cannot be authenticated and is skipped during journal replay. - -We get this picture for journal authentication: - - ,,,,,,,, - ,......,........................................... - ,. CS , hash1.----. hash2.----. - ,. | , . |hmac . |hmac - ,. v , . v . v - ,.REF#0,-> bud -> bud -> bud.-> auth -> bud -> bud.-> auth ... - ,..|...,........................................... - , | , - , | ,,,,,,,,,,,,,,, - . | hash3,----. - , | , |hmac - , v , v - , REF#1 -> bud -> bud,-> auth ... - ,,,|,,,,,,,,,,,,,,,,,, - v - REF#2 -> ... - | - V - ... - -Since the hash also includes the reference nodes an attacker cannot reorder or -skip any journal heads for replay. An attacker can only remove bud nodes or -reference nodes from the end of the journal, effectively rewinding the -filesystem at maximum back to the last commit. - -The location of the log area is stored in the master node. Since the master -node is authenticated with a HMAC as described above, it is not possible to -tamper with that without detection. The size of the log area is specified when -the filesystem is created using `mkfs.ubifs` and stored in the superblock node. -To avoid tampering with this and other values stored there, a HMAC is added to -the superblock struct. The superblock node is stored in LEB 0 and is only -modified on feature flag or similar changes, but never on file changes. - - -### LPT Authentication - -The location of the LPT root node on the flash is stored in the UBIFS master -node. Since the LPT is written and read atomically on every commit, there is -no need to authenticate individual nodes of the tree. It suffices to -protect the integrity of the full LPT by a simple hash stored in the master -node. Since the master node itself is authenticated, the LPTs authenticity can -be verified by verifying the authenticity of the master node and comparing the -LTP hash stored there with the hash computed from the read on-flash LPT. - - -## Key Management - -For simplicity, UBIFS authentication uses a single key to compute the HMACs -of superblock, master, commit start and reference nodes. This key has to be -available on creation of the filesystem (`mkfs.ubifs`) to authenticate the -superblock node. Further, it has to be available on mount of the filesystem -to verify authenticated nodes and generate new HMACs for changes. - -UBIFS authentication is intended to operate side-by-side with UBIFS encryption -(fscrypt) to provide confidentiality and authenticity. Since UBIFS encryption -has a different approach of encryption policies per directory, there can be -multiple fscrypt master keys and there might be folders without encryption. -UBIFS authentication on the other hand has an all-or-nothing approach in the -sense that it either authenticates everything of the filesystem or nothing. -Because of this and because UBIFS authentication should also be usable without -encryption, it does not share the same master key with fscrypt, but manages -a dedicated authentication key. - -The API for providing the authentication key has yet to be defined, but the -key can eg. be provided by userspace through a keyring similar to the way it -is currently done in fscrypt. It should however be noted that the current -fscrypt approach has shown its flaws and the userspace API will eventually -change [FSCRYPT-POLICY2]. - -Nevertheless, it will be possible for a user to provide a single passphrase -or key in userspace that covers UBIFS authentication and encryption. This can -be solved by the corresponding userspace tools which derive a second key for -authentication in addition to the derived fscrypt master key used for -encryption. - -To be able to check if the proper key is available on mount, the UBIFS -superblock node will additionally store a hash of the authentication key. This -approach is similar to the approach proposed for fscrypt encryption policy v2 -[FSCRYPT-POLICY2]. - - -# Future Extensions - -In certain cases where a vendor wants to provide an authenticated filesystem -image to customers, it should be possible to do so without sharing the secret -UBIFS authentication key. Instead, in addition the each HMAC a digital -signature could be stored where the vendor shares the public key alongside the -filesystem image. In case this filesystem has to be modified afterwards, -UBIFS can exchange all digital signatures with HMACs on first mount similar -to the way the IMA/EVM subsystem deals with such situations. The HMAC key -will then have to be provided beforehand in the normal way. - - -# References - -[CRYPTSETUP2] http://www.saout.de/pipermail/dm-crypt/2017-November/005745.html - -[DMC-CBC-ATTACK] http://www.jakoblell.com/blog/2013/12/22/practical-malleability-attack-against-cbc-encrypted-luks-partitions/ - -[DM-INTEGRITY] https://www.kernel.org/doc/Documentation/device-mapper/dm-integrity.rst - -[DM-VERITY] https://www.kernel.org/doc/Documentation/device-mapper/verity.rst - -[FSCRYPT-POLICY2] https://www.spinics.net/lists/linux-ext4/msg58710.html - -[UBIFS-WP] http://www.linux-mtd.infradead.org/doc/ubifs_whitepaper.pdf |