summaryrefslogtreecommitdiff
path: root/Documentation/gpio
diff options
context:
space:
mode:
authorAndrew Jeffery <andrew@aj.id.au>2016-06-10 10:16:33 +0300
committerLinus Walleij <linus.walleij@linaro.org>2016-06-13 10:30:31 +0300
commit3a0000f0cabba5e6e1d61e969250fc31e33f18bc (patch)
treef290da2f876da4b7c604e2060aabbc20f4ec6719 /Documentation/gpio
parenta246b8198f776a16d1d3a3bbfc2d437bad766b29 (diff)
downloadlinux-3a0000f0cabba5e6e1d61e969250fc31e33f18bc.tar.xz
gpio: Fix paths to GPIO driver source files
Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'Documentation/gpio')
-rw-r--r--Documentation/gpio/drivers-on-gpio.txt13
1 files changed, 7 insertions, 6 deletions
diff --git a/Documentation/gpio/drivers-on-gpio.txt b/Documentation/gpio/drivers-on-gpio.txt
index 14bf95a13bae..306513251713 100644
--- a/Documentation/gpio/drivers-on-gpio.txt
+++ b/Documentation/gpio/drivers-on-gpio.txt
@@ -37,15 +37,16 @@ hardware descriptions such as device tree or ACPI:
external connector status, such as a headset line for an audio driver or an
HDMI connector. It will provide a better userspace sysfs interface than GPIO.
-- restart-gpio: drivers/power/gpio-restart.c is used to restart/reboot the
- system by pulling a GPIO line and will register a restart handler so
+- restart-gpio: drivers/power/reset/gpio-restart.c is used to restart/reboot
+ the system by pulling a GPIO line and will register a restart handler so
userspace can issue the right system call to restart the system.
-- poweroff-gpio: drivers/power/gpio-poweroff.c is used to power the system down
- by pulling a GPIO line and will register a pm_power_off() callback so that
- userspace can issue the right system call to power down the system.
+- poweroff-gpio: drivers/power/reset/gpio-poweroff.c is used to power the
+ system down by pulling a GPIO line and will register a pm_power_off()
+ callback so that userspace can issue the right system call to power down the
+ system.
-- gpio-gate-clock: drivers/clk/clk-gpio-gate.c is used to control a gated clock
+- gpio-gate-clock: drivers/clk/clk-gpio.c is used to control a gated clock
(off/on) that uses a GPIO, and integrated with the clock subsystem.
- i2c-gpio: drivers/i2c/busses/i2c-gpio.c is used to drive an I2C bus