summaryrefslogtreecommitdiff
path: root/Documentation/hwmon
diff options
context:
space:
mode:
authorErik Rosen <erik.rosen@metormote.com>2021-05-07 22:40:22 +0300
committerGuenter Roeck <linux@roeck-us.net>2021-06-17 14:21:45 +0300
commitb976760dc4efd1de7965bf020195a22fce4f456c (patch)
treec21754fcbf7a6f3ee1fe14af57e1a45c1a61496d /Documentation/hwmon
parent86c908d90fb17273f5f6d15539ad3d7bf134d892 (diff)
downloadlinux-b976760dc4efd1de7965bf020195a22fce4f456c.tar.xz
hwmon: (pmbus) Add documentation for new flags
Add documentation for the new pmbus flags PMBUS_WRITE_PROTECTED, PMBUS_NO_CAPABILITY and PMBUS_READ_STATUS_AFTER_FAILED_CHECK Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210507194023.61138-3-erik.rosen@metormote.com [groeck: Added newline at end of file] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Diffstat (limited to 'Documentation/hwmon')
-rw-r--r--Documentation/hwmon/pmbus-core.rst42
1 files changed, 38 insertions, 4 deletions
diff --git a/Documentation/hwmon/pmbus-core.rst b/Documentation/hwmon/pmbus-core.rst
index 73e23ab42cc3..e7e0c9ef10be 100644
--- a/Documentation/hwmon/pmbus-core.rst
+++ b/Documentation/hwmon/pmbus-core.rst
@@ -289,12 +289,22 @@ PMBus driver platform data
==========================
PMBus platform data is defined in include/linux/pmbus.h. Platform data
-currently only provides a flag field with a single bit used::
+currently provides a flags field with four bits used::
- #define PMBUS_SKIP_STATUS_CHECK (1 << 0)
+ #define PMBUS_SKIP_STATUS_CHECK BIT(0)
+
+ #define PMBUS_WRITE_PROTECTED BIT(1)
+
+ #define PMBUS_NO_CAPABILITY BIT(2)
+
+ #define PMBUS_READ_STATUS_AFTER_FAILED_CHECK BIT(3)
struct pmbus_platform_data {
u32 flags; /* Device specific flags */
+
+ /* regulator support */
+ int num_regulators;
+ struct regulator_init_data *reg_init_data;
};
@@ -302,8 +312,9 @@ Flags
-----
PMBUS_SKIP_STATUS_CHECK
- During register detection, skip checking the status register for
- communication or command errors.
+
+During register detection, skip checking the status register for
+communication or command errors.
Some PMBus chips respond with valid data when trying to read an unsupported
register. For such chips, checking the status register is mandatory when
@@ -315,3 +326,26 @@ status register must be disabled.
Some i2c controllers do not support single-byte commands (write commands with
no data, i2c_smbus_write_byte()). With such controllers, clearing the status
register is impossible, and the PMBUS_SKIP_STATUS_CHECK flag must be set.
+
+PMBUS_WRITE_PROTECTED
+
+Set if the chip is write protected and write protection is not determined
+by the standard WRITE_PROTECT command.
+
+PMBUS_NO_CAPABILITY
+
+Some PMBus chips don't respond with valid data when reading the CAPABILITY
+register. For such chips, this flag should be set so that the PMBus core
+driver doesn't use CAPABILITY to determine it's behavior.
+
+PMBUS_READ_STATUS_AFTER_FAILED_CHECK
+
+Read the STATUS register after each failed register check.
+
+Some PMBus chips end up in an undefined state when trying to read an
+unsupported register. For such chips, it is necessary to reset the
+chip pmbus controller to a known state after a failed register check.
+This can be done by reading a known register. By setting this flag the
+driver will try to read the STATUS register after each failed
+register check. This read may fail, but it will put the chip into a
+known state.