summaryrefslogtreecommitdiff
path: root/Documentation/mips/pci/pci.README
diff options
context:
space:
mode:
authorRalf Baechle <ralf@linux-mips.org>2007-05-03 21:13:08 +0400
committerRalf Baechle <ralf@linux-mips.org>2007-05-11 17:28:30 +0400
commit774583f8bcfbdc423e51cb8b924d8c6cea4afbac (patch)
treed593e9200c980232e16e3fdaf7006f4c387b1d8a /Documentation/mips/pci/pci.README
parent36ea1d57a4bb7d033b5f99f13c08f9af56cd70d7 (diff)
downloadlinux-774583f8bcfbdc423e51cb8b924d8c6cea4afbac.tar.xz
[MIPS] Delete Documentation/mips/pci/pci.README
This file, and reality are different universes ... Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'Documentation/mips/pci/pci.README')
-rw-r--r--Documentation/mips/pci/pci.README54
1 files changed, 0 insertions, 54 deletions
diff --git a/Documentation/mips/pci/pci.README b/Documentation/mips/pci/pci.README
deleted file mode 100644
index 8697ee41372d..000000000000
--- a/Documentation/mips/pci/pci.README
+++ /dev/null
@@ -1,54 +0,0 @@
-
-Pete Popov, ppopov@pacbell.net
-07/11/2001
-
-This README briefly explains how to use the pci and pci_auto
-code in arch/mips/kernel. The code was ported from PowerPC and
-modified slightly. It has been tested pretty well on PPC on some
-rather complex systems with multiple bridges and devices behind
-each bridge. However, at the time this README was written, the
-mips port was tested only on boards with a single pci bus and
-no P2P bridges. It's very possible that on boards with P2P
-bridges some modifications have to be made. The code will
-evolve, no doubt, but currently every single mips board
-is doing its own pcibios thing and it has become a big
-mess. This generic pci code is meant to clean up the mips
-pci mess and make it easier to add pci support to new boards.
-
-inside the define for your board in arch/mips/config.in.
-For example, the Galileo EV96100 board looks like this:
-
-if [ "$CONFIG_MIPS_EV96100" = "y" ]; then
- define_bool CONFIG_PCI y
- define_bool CONFIG_MIPS_GT96100 y
- define_bool CONFIG_NEW_PCI y
- define_bool CONFIG_SWAP_IO_SPACE y
-fi
-
-
-Next, if you want to use the arch/mips/kernel/pci code, which has the
-pcibios_init() function, add
-
-define_bool CONFIG_NEW_PCI y
-
-inside the define for your board. Again, the EV96100 example above
-show NEW_PCI turned on.
-
-
-Now you need to add your files to hook in your pci configuration
-cycles. Usually you'll need only a couple of files named something
-like pci_fixups.c and pci_ops.c. You can copy the templates
-provided and fill in the code.
-
-The file pci_ops.c should contain the pci configuration cycles routines.
-It also has the mips_pci_channels[] array which contains the descriptors
-of each pci controller.
-
-The file pci_fixups.c contains a few routines to do interrupt fixups,
-resources fixups, and, if needed, pci bios fixups.
-
-Usually you'll put your pci_fixups.c file in your board specific directory,
-since the functions in that file are board specific. The functions in
-pci_ops.c, on the other hand, are usually pci controller specific so that
-file could be shared among a few different boards using the same
-pci controller.