diff options
author | Mauro Carvalho Chehab <mchehab+huawei@kernel.org> | 2020-05-01 17:44:25 +0300 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2020-05-01 22:24:40 +0300 |
commit | 58ccb2b2e87d52ec0b4cbd40b94e0b63e90af873 (patch) | |
tree | f0d873c92e4ebd4e69ea39b367b362d376a26131 /Documentation/networking/vrf.txt | |
parent | 961fb1ff412a2cefaf50f4f56bb60a10ed071df5 (diff) | |
download | linux-58ccb2b2e87d52ec0b4cbd40b94e0b63e90af873.tar.xz |
docs: networking: convert vrf.txt to ReST
- add SPDX header;
- adjust title markup;
- Add a subtitle for the first section;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'Documentation/networking/vrf.txt')
-rw-r--r-- | Documentation/networking/vrf.txt | 418 |
1 files changed, 0 insertions, 418 deletions
diff --git a/Documentation/networking/vrf.txt b/Documentation/networking/vrf.txt deleted file mode 100644 index a5f103b083a0..000000000000 --- a/Documentation/networking/vrf.txt +++ /dev/null @@ -1,418 +0,0 @@ -Virtual Routing and Forwarding (VRF) -==================================== -The VRF device combined with ip rules provides the ability to create virtual -routing and forwarding domains (aka VRFs, VRF-lite to be specific) in the -Linux network stack. One use case is the multi-tenancy problem where each -tenant has their own unique routing tables and in the very least need -different default gateways. - -Processes can be "VRF aware" by binding a socket to the VRF device. Packets -through the socket then use the routing table associated with the VRF -device. An important feature of the VRF device implementation is that it -impacts only Layer 3 and above so L2 tools (e.g., LLDP) are not affected -(ie., they do not need to be run in each VRF). The design also allows -the use of higher priority ip rules (Policy Based Routing, PBR) to take -precedence over the VRF device rules directing specific traffic as desired. - -In addition, VRF devices allow VRFs to be nested within namespaces. For -example network namespaces provide separation of network interfaces at the -device layer, VLANs on the interfaces within a namespace provide L2 separation -and then VRF devices provide L3 separation. - -Design ------- -A VRF device is created with an associated route table. Network interfaces -are then enslaved to a VRF device: - - +-----------------------------+ - | vrf-blue | ===> route table 10 - +-----------------------------+ - | | | - +------+ +------+ +-------------+ - | eth1 | | eth2 | ... | bond1 | - +------+ +------+ +-------------+ - | | - +------+ +------+ - | eth8 | | eth9 | - +------+ +------+ - -Packets received on an enslaved device and are switched to the VRF device -in the IPv4 and IPv6 processing stacks giving the impression that packets -flow through the VRF device. Similarly on egress routing rules are used to -send packets to the VRF device driver before getting sent out the actual -interface. This allows tcpdump on a VRF device to capture all packets into -and out of the VRF as a whole.[1] Similarly, netfilter[2] and tc rules can be -applied using the VRF device to specify rules that apply to the VRF domain -as a whole. - -[1] Packets in the forwarded state do not flow through the device, so those - packets are not seen by tcpdump. Will revisit this limitation in a - future release. - -[2] Iptables on ingress supports PREROUTING with skb->dev set to the real - ingress device and both INPUT and PREROUTING rules with skb->dev set to - the VRF device. For egress POSTROUTING and OUTPUT rules can be written - using either the VRF device or real egress device. - -Setup ------ -1. VRF device is created with an association to a FIB table. - e.g, ip link add vrf-blue type vrf table 10 - ip link set dev vrf-blue up - -2. An l3mdev FIB rule directs lookups to the table associated with the device. - A single l3mdev rule is sufficient for all VRFs. The VRF device adds the - l3mdev rule for IPv4 and IPv6 when the first device is created with a - default preference of 1000. Users may delete the rule if desired and add - with a different priority or install per-VRF rules. - - Prior to the v4.8 kernel iif and oif rules are needed for each VRF device: - ip ru add oif vrf-blue table 10 - ip ru add iif vrf-blue table 10 - -3. Set the default route for the table (and hence default route for the VRF). - ip route add table 10 unreachable default metric 4278198272 - - This high metric value ensures that the default unreachable route can - be overridden by a routing protocol suite. FRRouting interprets - kernel metrics as a combined admin distance (upper byte) and priority - (lower 3 bytes). Thus the above metric translates to [255/8192]. - -4. Enslave L3 interfaces to a VRF device. - ip link set dev eth1 master vrf-blue - - Local and connected routes for enslaved devices are automatically moved to - the table associated with VRF device. Any additional routes depending on - the enslaved device are dropped and will need to be reinserted to the VRF - FIB table following the enslavement. - - The IPv6 sysctl option keep_addr_on_down can be enabled to keep IPv6 global - addresses as VRF enslavement changes. - sysctl -w net.ipv6.conf.all.keep_addr_on_down=1 - -5. Additional VRF routes are added to associated table. - ip route add table 10 ... - - -Applications ------------- -Applications that are to work within a VRF need to bind their socket to the -VRF device: - - setsockopt(sd, SOL_SOCKET, SO_BINDTODEVICE, dev, strlen(dev)+1); - -or to specify the output device using cmsg and IP_PKTINFO. - -By default the scope of the port bindings for unbound sockets is -limited to the default VRF. That is, it will not be matched by packets -arriving on interfaces enslaved to an l3mdev and processes may bind to -the same port if they bind to an l3mdev. - -TCP & UDP services running in the default VRF context (ie., not bound -to any VRF device) can work across all VRF domains by enabling the -tcp_l3mdev_accept and udp_l3mdev_accept sysctl options: - - sysctl -w net.ipv4.tcp_l3mdev_accept=1 - sysctl -w net.ipv4.udp_l3mdev_accept=1 - -These options are disabled by default so that a socket in a VRF is only -selected for packets in that VRF. There is a similar option for RAW -sockets, which is enabled by default for reasons of backwards compatibility. -This is so as to specify the output device with cmsg and IP_PKTINFO, but -using a socket not bound to the corresponding VRF. This allows e.g. older ping -implementations to be run with specifying the device but without executing it -in the VRF. This option can be disabled so that packets received in a VRF -context are only handled by a raw socket bound to the VRF, and packets in the -default VRF are only handled by a socket not bound to any VRF: - - sysctl -w net.ipv4.raw_l3mdev_accept=0 - -netfilter rules on the VRF device can be used to limit access to services -running in the default VRF context as well. - -################################################################################ - -Using iproute2 for VRFs -======================= -iproute2 supports the vrf keyword as of v4.7. For backwards compatibility this -section lists both commands where appropriate -- with the vrf keyword and the -older form without it. - -1. Create a VRF - - To instantiate a VRF device and associate it with a table: - $ ip link add dev NAME type vrf table ID - - As of v4.8 the kernel supports the l3mdev FIB rule where a single rule - covers all VRFs. The l3mdev rule is created for IPv4 and IPv6 on first - device create. - -2. List VRFs - - To list VRFs that have been created: - $ ip [-d] link show type vrf - NOTE: The -d option is needed to show the table id - - For example: - $ ip -d link show type vrf - 11: mgmt: <NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 - link/ether 72:b3:ba:91:e2:24 brd ff:ff:ff:ff:ff:ff promiscuity 0 - vrf table 1 addrgenmode eui64 - 12: red: <NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 - link/ether b6:6f:6e:f6:da:73 brd ff:ff:ff:ff:ff:ff promiscuity 0 - vrf table 10 addrgenmode eui64 - 13: blue: <NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 - link/ether 36:62:e8:7d:bb:8c brd ff:ff:ff:ff:ff:ff promiscuity 0 - vrf table 66 addrgenmode eui64 - 14: green: <NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 - link/ether e6:28:b8:63:70:bb brd ff:ff:ff:ff:ff:ff promiscuity 0 - vrf table 81 addrgenmode eui64 - - - Or in brief output: - - $ ip -br link show type vrf - mgmt UP 72:b3:ba:91:e2:24 <NOARP,MASTER,UP,LOWER_UP> - red UP b6:6f:6e:f6:da:73 <NOARP,MASTER,UP,LOWER_UP> - blue UP 36:62:e8:7d:bb:8c <NOARP,MASTER,UP,LOWER_UP> - green UP e6:28:b8:63:70:bb <NOARP,MASTER,UP,LOWER_UP> - - -3. Assign a Network Interface to a VRF - - Network interfaces are assigned to a VRF by enslaving the netdevice to a - VRF device: - $ ip link set dev NAME master NAME - - On enslavement connected and local routes are automatically moved to the - table associated with the VRF device. - - For example: - $ ip link set dev eth0 master mgmt - - -4. Show Devices Assigned to a VRF - - To show devices that have been assigned to a specific VRF add the master - option to the ip command: - $ ip link show vrf NAME - $ ip link show master NAME - - For example: - $ ip link show vrf red - 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP mode DEFAULT group default qlen 1000 - link/ether 02:00:00:00:02:02 brd ff:ff:ff:ff:ff:ff - 4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP mode DEFAULT group default qlen 1000 - link/ether 02:00:00:00:02:03 brd ff:ff:ff:ff:ff:ff - 7: eth5: <BROADCAST,MULTICAST> mtu 1500 qdisc noop master red state DOWN mode DEFAULT group default qlen 1000 - link/ether 02:00:00:00:02:06 brd ff:ff:ff:ff:ff:ff - - - Or using the brief output: - $ ip -br link show vrf red - eth1 UP 02:00:00:00:02:02 <BROADCAST,MULTICAST,UP,LOWER_UP> - eth2 UP 02:00:00:00:02:03 <BROADCAST,MULTICAST,UP,LOWER_UP> - eth5 DOWN 02:00:00:00:02:06 <BROADCAST,MULTICAST> - - -5. Show Neighbor Entries for a VRF - - To list neighbor entries associated with devices enslaved to a VRF device - add the master option to the ip command: - $ ip [-6] neigh show vrf NAME - $ ip [-6] neigh show master NAME - - For example: - $ ip neigh show vrf red - 10.2.1.254 dev eth1 lladdr a6:d9:c7:4f:06:23 REACHABLE - 10.2.2.254 dev eth2 lladdr 5e:54:01:6a:ee:80 REACHABLE - - $ ip -6 neigh show vrf red - 2002:1::64 dev eth1 lladdr a6:d9:c7:4f:06:23 REACHABLE - - -6. Show Addresses for a VRF - - To show addresses for interfaces associated with a VRF add the master - option to the ip command: - $ ip addr show vrf NAME - $ ip addr show master NAME - - For example: - $ ip addr show vrf red - 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 - link/ether 02:00:00:00:02:02 brd ff:ff:ff:ff:ff:ff - inet 10.2.1.2/24 brd 10.2.1.255 scope global eth1 - valid_lft forever preferred_lft forever - inet6 2002:1::2/120 scope global - valid_lft forever preferred_lft forever - inet6 fe80::ff:fe00:202/64 scope link - valid_lft forever preferred_lft forever - 4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 - link/ether 02:00:00:00:02:03 brd ff:ff:ff:ff:ff:ff - inet 10.2.2.2/24 brd 10.2.2.255 scope global eth2 - valid_lft forever preferred_lft forever - inet6 2002:2::2/120 scope global - valid_lft forever preferred_lft forever - inet6 fe80::ff:fe00:203/64 scope link - valid_lft forever preferred_lft forever - 7: eth5: <BROADCAST,MULTICAST> mtu 1500 qdisc noop master red state DOWN group default qlen 1000 - link/ether 02:00:00:00:02:06 brd ff:ff:ff:ff:ff:ff - - Or in brief format: - $ ip -br addr show vrf red - eth1 UP 10.2.1.2/24 2002:1::2/120 fe80::ff:fe00:202/64 - eth2 UP 10.2.2.2/24 2002:2::2/120 fe80::ff:fe00:203/64 - eth5 DOWN - - -7. Show Routes for a VRF - - To show routes for a VRF use the ip command to display the table associated - with the VRF device: - $ ip [-6] route show vrf NAME - $ ip [-6] route show table ID - - For example: - $ ip route show vrf red - unreachable default metric 4278198272 - broadcast 10.2.1.0 dev eth1 proto kernel scope link src 10.2.1.2 - 10.2.1.0/24 dev eth1 proto kernel scope link src 10.2.1.2 - local 10.2.1.2 dev eth1 proto kernel scope host src 10.2.1.2 - broadcast 10.2.1.255 dev eth1 proto kernel scope link src 10.2.1.2 - broadcast 10.2.2.0 dev eth2 proto kernel scope link src 10.2.2.2 - 10.2.2.0/24 dev eth2 proto kernel scope link src 10.2.2.2 - local 10.2.2.2 dev eth2 proto kernel scope host src 10.2.2.2 - broadcast 10.2.2.255 dev eth2 proto kernel scope link src 10.2.2.2 - - $ ip -6 route show vrf red - local 2002:1:: dev lo proto none metric 0 pref medium - local 2002:1::2 dev lo proto none metric 0 pref medium - 2002:1::/120 dev eth1 proto kernel metric 256 pref medium - local 2002:2:: dev lo proto none metric 0 pref medium - local 2002:2::2 dev lo proto none metric 0 pref medium - 2002:2::/120 dev eth2 proto kernel metric 256 pref medium - local fe80:: dev lo proto none metric 0 pref medium - local fe80:: dev lo proto none metric 0 pref medium - local fe80::ff:fe00:202 dev lo proto none metric 0 pref medium - local fe80::ff:fe00:203 dev lo proto none metric 0 pref medium - fe80::/64 dev eth1 proto kernel metric 256 pref medium - fe80::/64 dev eth2 proto kernel metric 256 pref medium - ff00::/8 dev red metric 256 pref medium - ff00::/8 dev eth1 metric 256 pref medium - ff00::/8 dev eth2 metric 256 pref medium - unreachable default dev lo metric 4278198272 error -101 pref medium - -8. Route Lookup for a VRF - - A test route lookup can be done for a VRF: - $ ip [-6] route get vrf NAME ADDRESS - $ ip [-6] route get oif NAME ADDRESS - - For example: - $ ip route get 10.2.1.40 vrf red - 10.2.1.40 dev eth1 table red src 10.2.1.2 - cache - - $ ip -6 route get 2002:1::32 vrf red - 2002:1::32 from :: dev eth1 table red proto kernel src 2002:1::2 metric 256 pref medium - - -9. Removing Network Interface from a VRF - - Network interfaces are removed from a VRF by breaking the enslavement to - the VRF device: - $ ip link set dev NAME nomaster - - Connected routes are moved back to the default table and local entries are - moved to the local table. - - For example: - $ ip link set dev eth0 nomaster - --------------------------------------------------------------------------------- - -Commands used in this example: - -cat >> /etc/iproute2/rt_tables.d/vrf.conf <<EOF -1 mgmt -10 red -66 blue -81 green -EOF - -function vrf_create -{ - VRF=$1 - TBID=$2 - - # create VRF device - ip link add ${VRF} type vrf table ${TBID} - - if [ "${VRF}" != "mgmt" ]; then - ip route add table ${TBID} unreachable default metric 4278198272 - fi - ip link set dev ${VRF} up -} - -vrf_create mgmt 1 -ip link set dev eth0 master mgmt - -vrf_create red 10 -ip link set dev eth1 master red -ip link set dev eth2 master red -ip link set dev eth5 master red - -vrf_create blue 66 -ip link set dev eth3 master blue - -vrf_create green 81 -ip link set dev eth4 master green - - -Interface addresses from /etc/network/interfaces: -auto eth0 -iface eth0 inet static - address 10.0.0.2 - netmask 255.255.255.0 - gateway 10.0.0.254 - -iface eth0 inet6 static - address 2000:1::2 - netmask 120 - -auto eth1 -iface eth1 inet static - address 10.2.1.2 - netmask 255.255.255.0 - -iface eth1 inet6 static - address 2002:1::2 - netmask 120 - -auto eth2 -iface eth2 inet static - address 10.2.2.2 - netmask 255.255.255.0 - -iface eth2 inet6 static - address 2002:2::2 - netmask 120 - -auto eth3 -iface eth3 inet static - address 10.2.3.2 - netmask 255.255.255.0 - -iface eth3 inet6 static - address 2002:3::2 - netmask 120 - -auto eth4 -iface eth4 inet static - address 10.2.4.2 - netmask 255.255.255.0 - -iface eth4 inet6 static - address 2002:4::2 - netmask 120 |