summaryrefslogtreecommitdiff
path: root/Documentation/sound
diff options
context:
space:
mode:
authorTakashi Sakamoto <o-takashi@sakamocchi.jp>2017-07-02 05:44:43 +0300
committerTakashi Iwai <tiwai@suse.de>2017-07-02 12:15:52 +0300
commitd8b53bff0a499cd05a5026307af9a5f41f604ea3 (patch)
tree200bb8e6dceaf0eb65b6f6550b08d7366180e09d /Documentation/sound
parent7720113516eacd7b91272c2298b1b392ae1ae436 (diff)
downloadlinux-d8b53bff0a499cd05a5026307af9a5f41f604ea3.tar.xz
ALSA: pcm: add a documentation for tracepoints
In PCM interface/protocol for userspace, parameters of runtime for PCM substream is decided by an interaction between applications and ALSA PCM core. In former commits, some tracepoints were added to probe a part of the interaction. This commit adds a documentation about the interaction and the tracepoints. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'Documentation/sound')
-rw-r--r--Documentation/sound/designs/index.rst1
-rw-r--r--Documentation/sound/designs/tracepoints.rst172
2 files changed, 173 insertions, 0 deletions
diff --git a/Documentation/sound/designs/index.rst b/Documentation/sound/designs/index.rst
index 04dcdae3e4f2..f0749943ccb2 100644
--- a/Documentation/sound/designs/index.rst
+++ b/Documentation/sound/designs/index.rst
@@ -9,6 +9,7 @@ Designs and Implementations
compress-offload
timestamping
jack-controls
+ tracepoints
procfile
powersave
oss-emulation
diff --git a/Documentation/sound/designs/tracepoints.rst b/Documentation/sound/designs/tracepoints.rst
new file mode 100644
index 000000000000..78bc5572f829
--- /dev/null
+++ b/Documentation/sound/designs/tracepoints.rst
@@ -0,0 +1,172 @@
+===================
+Tracepoints in ALSA
+===================
+
+2017/07/02
+Takasahi Sakamoto
+
+Tracepoints in ALSA PCM core
+============================
+
+ALSA PCM core registers ``snd_pcm`` subsystem to kernel tracepoint system.
+This subsystem includes two categories of tracepoints; for state of PCM buffer
+and for processing of PCM hardware parameters. These tracepoints are available
+when corresponding kernel configurations are enabled. When ``CONFIG_SND_DEBUG``
+is enabled, the latter tracepoints are available. When additional
+``SND_PCM_XRUN_DEBUG`` is enabled too, the former trace points are enabled.
+
+Tracepoints for state of PCM buffer
+------------------------------------
+
+This category includes four tracepoints; ``hwptr``, ``applptr``, ``xrun`` and
+``hw_ptr_error``.
+
+Tracepoints for processing of PCM hardware parameters
+-----------------------------------------------------
+
+This category includes two tracepoints; ``hw_mask_param`` and
+``hw_interval_param``.
+
+In a design of ALSA PCM core, data transmission is abstracted as PCM substream.
+Applications manage PCM substream to maintain data transmission for PCM frames.
+Before starting the data transmission, applications need to configure PCM
+substream. In this procedure, PCM hardware parameters are decided by
+interaction between applications and ALSA PCM core. Once decided, runtime of
+the PCM substream keeps the parameters.
+
+The parameters are described in :c:type:`struct snd_pcm_hw_params`. This
+structure includes several types of parameters. Applications set preferable
+value to these parameters, then execute ioctl(2) with SNDRV_PCM_IOCTL_HW_REFINE
+or SNDRV_PCM_IOCTL_HW_PARAMS. The former is used just for refining available
+set of parameters. The latter is used for an actual decision of the parameters.
+
+The :c:type:`struct snd_pcm_hw_params` structure has below members:
+
+``flags``
+ Configurable. ALSA PCM core and some drivers handle this flag to select
+ convenient parameters or change their behaviour.
+``masks``
+ Configurable. This type of parameter is described in
+ :c:type:`struct snd_mask` and represent mask values. As of PCM protocol
+ v2.0.13, three types are defined.
+
+ - SNDRV_PCM_HW_PARAM_ACCESS
+ - SNDRV_PCM_HW_PARAM_FORMAT
+ - SNDRV_PCM_HW_PARAM_SUBFORMAT
+``intervals``
+ Configurable. This type of parameter is described in
+ :c:type:`struct snd_interval` and represent values with a range. As of
+ PCM protocol v2.0.13, twelve types are defined.
+
+ - SNDRV_PCM_HW_PARAM_SAMPLE_BITS
+ - SNDRV_PCM_HW_PARAM_FRAME_BITS
+ - SNDRV_PCM_HW_PARAM_CHANNELS
+ - SNDRV_PCM_HW_PARAM_RATE
+ - SNDRV_PCM_HW_PARAM_PERIOD_TIME
+ - SNDRV_PCM_HW_PARAM_PERIOD_SIZE
+ - SNDRV_PCM_HW_PARAM_PERIOD_BYTES
+ - SNDRV_PCM_HW_PARAM_PERIODS
+ - SNDRV_PCM_HW_PARAM_BUFFER_TIME
+ - SNDRV_PCM_HW_PARAM_BUFFER_SIZE
+ - SNDRV_PCM_HW_PARAM_BUFFER_BYTES
+ - SNDRV_PCM_HW_PARAM_TICK_TIME
+``rmask``
+ Configurable. This is evaluated at ioctl(2) with
+ SNDRV_PCM_IOCTL_HW_REFINE only. Applications can select which
+ mask/interval parameter can be changed by ALSA PCM core. For
+ SNDRV_PCM_IOCTL_HW_PARAMS, this mask is ignored and all of parameters
+ are going to be changed.
+``cmask``
+ Read-only. After returning from ioctl(2), buffer in user space for
+ :c:type:`struct snd_pcm_hw_params` includes result of each operation.
+ This mask represents which mask/interval parameter is actually changed.
+``info``
+ Read-only. This represents hardware/driver capabilities as bit flags
+ with SNDRV_PCM_INFO_XXX. Typically, applications execute ioctl(2) with
+ SNDRV_PCM_IOCTL_HW_REFINE to retrieve this flag, then decide candidates
+ of parameters and execute ioctl(2) with SNDRV_PCM_IOCTL_HW_PARAMS to
+ configure PCM substream.
+``msbits``
+ Read-only. This value represents available bit width in MSB side of
+ a PCM sample. When a parameter of SNDRV_PCM_HW_PARAM_SAMPLE_BITS was
+ decided as a fixed number, this value is also calculated according to
+ it. Else, zero. But this behaviour depends on implementations in driver
+ side.
+``rate_num``
+ Read-only. This value represents numerator of sampling rate in fraction
+ notation. Basically, when a parameter of SNDRV_PCM_HW_PARAM_RATE was
+ decided as a single value, this value is also calculated according to
+ it. Else, zero. But this behaviour depends on implementations in driver
+ side.
+``rate_den``
+ Read-only. This value represents denominator of sampling rate in
+ fraction notation. Basically, when a parameter of
+ SNDRV_PCM_HW_PARAM_RATE was decided as a single value, this value is
+ also calculated according to it. Else, zero. But this behaviour depends
+ on implementations in driver side.
+``fifo_size``
+ Read-only. This value represents the size of FIFO in serial sound
+ interface of hardware. Basically, each driver can assigns a proper
+ value to this parameter but some drivers intentionally set zero with
+ a care of hardware design or data transmission protocol.
+
+ALSA PCM core handles buffer of :c:type:`struct snd_pcm_hw_params` when
+applications execute ioctl(2) with SNDRV_PCM_HW_REFINE or SNDRV_PCM_HW_PARAMS.
+Parameters in the buffer are changed according to
+:c:type:`struct snd_pcm_hardware` and rules of constraints in the runtime. The
+structure describes capabilities of handled hardware. The rules describes
+dependencies on which a parameter is decided according to several parameters.
+A rule has a callback function, and drivers can register arbitrary functions
+to compute the target parameter. ALSA PCM core registers some rules to the
+runtime as a default.
+
+Each driver can join in the interaction as long as it prepared for two stuffs
+in a callback of :c:type:`struct snd_pcm_ops.open`.
+
+1. In the callback, drivers are expected to change a member of
+ :c:type:`struct snd_pcm_hardware` type in the runtime, according to
+ capacities of corresponding hardware.
+2. In the same callback, drivers are also expected to register additional rules
+ of constraints into the runtime when several parameters have dependencies
+ due to hardware design.
+
+The driver can refers to result of the interaction in a callback of
+:c:type:`struct snd_pcm_ops.hw_params`, however it should not change the
+content.
+
+Tracepoints in this category are designed to trace changes of the
+mask/interval parameters. When ALSA PCM core changes them, ``hw_mask_param`` or
+``hw_interval_param`` event is probed according to type of the changed parameter.
+
+ALSA PCM core also has a pretty print format for each of the tracepoints. Below
+is an example for ``hw_mask_param``.
+
+::
+
+ hw_mask_param: pcmC0D0p 001/023 FORMAT 00000000000000000000001000000044 00000000000000000000001000000044
+
+
+Below is an example for ``hw_interval_param``.
+
+::
+
+ hw_interval_param: pcmC0D0p 000/023 BUFFER_SIZE 0 0 [0 4294967295] 0 1 [0 4294967295]
+
+The first three fields are common. They represent name of ALSA PCM character
+device, rules of constraint and name of the changed parameter, in order. The
+field for rules of constraint consists of two sub-fields; index of applied rule
+and total number of rules added to the runtime. As an exception, the index 000
+means that the parameter is changed by ALSA PCM core, regardless of the rules.
+
+The rest of field represent state of the parameter before/after changing. These
+fields are different according to type of the parameter. For parameters of mask
+type, the fields represent hexadecimal dump of content of the parameter. For
+parameters of interval type, the fields represent values of each member of
+``empty``, ``integer``, ``openmin``, ``min``, ``max``, ``openmax`` in
+:c:type:`struct snd_interval` in this order.
+
+Tracepoints in drivers
+======================
+
+Some drivers have tracepoints for developers' convenience. For them, please
+refer to each documentation or implementation.