summaryrefslogtreecommitdiff
path: root/Documentation/sound
diff options
context:
space:
mode:
authorTakashi Iwai <tiwai@suse.de>2023-06-13 08:36:39 +0300
committerTakashi Iwai <tiwai@suse.de>2023-06-13 08:37:59 +0300
commit508b662b6928808d1af3887f4adc20fb0cd315df (patch)
treeda96313fc7566406ca8ecb10d4509abc255e8f07 /Documentation/sound
parent9b4469410cf9a0fcbccc92c480fd42f7c815a745 (diff)
parentfebdfa0e9c8a5d3a3d895245d1c294c26787daef (diff)
downloadlinux-508b662b6928808d1af3887f4adc20fb0cd315df.tar.xz
Merge branch 'topic/midi20' into for-next
As the updated MIDI 2.0 spec has been published freshly, this is a catch up to add the support for new specs, especially UMP v1.1 features, on Linux kernel. The new UMP v1.1 introduced the concept of Function Blocks (FB), which is a kind of superset of USB MIDI 2.0 Group Terminal Blocks (GTB). The patch set adds the support for FB as the primary information source while keeping the parse of GTB as fallback. Also UMP v1.1 supports the groupless messages, the protocol switch, static FBs, and other new fundamental features, and those are supported as well. Link: https://www.midi.org/midi-articles/details-about-midi-2-0-midi-ci-profiles-and-property-exchange Link: https://lore.kernel.org/r/20230612081054.17200-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'Documentation/sound')
-rw-r--r--Documentation/sound/designs/midi-2.0.rst39
1 files changed, 33 insertions, 6 deletions
diff --git a/Documentation/sound/designs/midi-2.0.rst b/Documentation/sound/designs/midi-2.0.rst
index d55b0a4c6acb..27d0d3dea1b0 100644
--- a/Documentation/sound/designs/midi-2.0.rst
+++ b/Documentation/sound/designs/midi-2.0.rst
@@ -68,6 +68,15 @@ default instead of the MIDI 1.0 interface (at altset 0). You can
switch back to the binding with the old MIDI 1.0 interface by passing
`midi2_enable=0` option to snd-usb-audio driver module, too.
+The USB audio driver tries to query the UMP Endpoint and UMP Function
+Block information that are provided since UMP v1.1, and builds up the
+topology based on those information. When the device is older and
+doesn't respond to the new UMP inquiries, the driver falls back and
+builds the topology based on Group Terminal Block (GTB) information
+from the USB descriptor. Some device might be screwed up by the
+unexpected UMP command; in such a case, pass `midi2_probe=0` option to
+snd-usb-audio driver for skipping the UMP v1.1 inquiries.
+
When the MIDI 2.0 device is probed, the kernel creates a rawmidi
device for each UMP Endpoint of the device. Its device name is
`/dev/snd/umpC*D*` and different from the standard rawmidi device name
@@ -101,11 +110,15 @@ opening `/dev/snd/midiC*D*` will end up with opening the first
substream.
Each UMP Endpoint can provide the additional information, constructed
-from USB MIDI 2.0 descriptors. And a UMP Endpoint may contain one or
-more UMP Blocks, where UMP Block is an abstraction introduced in the
-ALSA UMP implementations to represent the associations among UMP
-Groups. UMP Block corresponds to Group Terminal Block (GTB) in USB
-MIDI 2.0 specifications but provide a few more generic information.
+from the information inquired via UMP 1.1 Stream messages or USB MIDI
+2.0 descriptors. And a UMP Endpoint may contain one or more UMP
+Blocks, where UMP Block is an abstraction introduced in the ALSA UMP
+implementations to represent the associations among UMP Groups. UMP
+Block corresponds to Function Block in UMP 1.1 specification. When
+UMP 1.1 Function Block information isn't available, it's filled
+partially from Group Terminal Block (GTB) as defined in USB MIDI 2.0
+specifications.
+
The information of UMP Endpoints and UMP Blocks are found in the proc
file `/proc/asound/card*/midi*`. For example::
@@ -207,6 +220,8 @@ The "MIDI 2.0" port is for a UMP Endpoint, and its difference from
other UMP Group ports is that UMP Endpoint port sends the events from
the all ports on the device ("catch-all"), while each UMP Group port
sends only the events from the given UMP Group.
+Also, UMP groupless messages (such as the UMP message type 0x0f) are
+sent only to the UMP Endpoint port.
Note that, although each UMP sequencer client usually creates 16
ports, those ports that don't belong to any UMP Blocks (or belonging
@@ -273,6 +288,11 @@ Rawmidi API Extensions
The direction is either `SNDRV_UMP_DIR_INPUT`,
`SNDRV_UMP_DIR_OUTPUT` or `SNDRV_UMP_DIR_BIDIRECTION`.
+* For the device supports UMP v1.1, the UMP MIDI protocol can be
+ switched via "Stream Configuration Request" message (UMP type 0x0f,
+ status 0x05). When UMP core receives such a message, it updates the
+ UMP EP info and the corresponding sequencer clients as well.
+
Control API Extensions
======================
@@ -337,7 +357,7 @@ Sequencer API Extensions
`group_filter` bitmap. The filter consists of bitmap from 1-based
Group numbers. For example, when the bit 1 is set, messages from
Group 1 (i.e. the very first group) are filtered and not delivered.
- The bit 0 is reserved for future use.
+ The bit 0 is used for filtering UMP groupless messages.
* Two new ioctls are added for UMP-capable clients:
`SNDRV_SEQ_IOCTL_GET_CLIENT_UMP_INFO` and
@@ -349,3 +369,10 @@ Sequencer API Extensions
For an Endpoint data, pass 0 to the `type` field, while for a Block
data, pass the block number + 1 to the `type` field.
Setting the data for a kernel client shall result in an error.
+
+* With UMP 1.1, Function Block information may be changed
+ dynamically. When the update of Function Block is received from the
+ device, ALSA sequencer core changes the corresponding sequencer port
+ name and attributes accordingly, and notifies the changes via the
+ announcement to the ALSA sequencer system port, similarly like the
+ normal port change notification.