diff options
author | Phong Tran <tranmanphong@gmail.com> | 2019-07-11 19:52:01 +0300 |
---|---|---|
committer | Jonathan Corbet <corbet@lwn.net> | 2019-07-31 22:13:45 +0300 |
commit | fe13225fdc3f7b79e2921869a13386f48b30bf79 (patch) | |
tree | 11e5d3ee8dc994ab2809b6ccecb759977caba801 /Documentation/trace/coresight.txt | |
parent | 34d5f4f269a21c7b5d64b4db0391d36511f1ac1a (diff) | |
download | linux-fe13225fdc3f7b79e2921869a13386f48b30bf79.tar.xz |
Documentation: coresight: convert txt to rst
This changes from plain text to reStructuredText as suggestion
in doc-guide [1]
[1] https://www.kernel.org/doc/html/latest/doc-guide/sphinx.html
Some adaptations such as: literal block, ``inline literal`` and
alignment text,...
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Diffstat (limited to 'Documentation/trace/coresight.txt')
-rw-r--r-- | Documentation/trace/coresight.txt | 482 |
1 files changed, 0 insertions, 482 deletions
diff --git a/Documentation/trace/coresight.txt b/Documentation/trace/coresight.txt deleted file mode 100644 index b027d61b27a6..000000000000 --- a/Documentation/trace/coresight.txt +++ /dev/null @@ -1,482 +0,0 @@ - Coresight - HW Assisted Tracing on ARM - ====================================== - - Author: Mathieu Poirier <mathieu.poirier@linaro.org> - Date: September 11th, 2014 - -Introduction ------------- - -Coresight is an umbrella of technologies allowing for the debugging of ARM -based SoC. It includes solutions for JTAG and HW assisted tracing. This -document is concerned with the latter. - -HW assisted tracing is becoming increasingly useful when dealing with systems -that have many SoCs and other components like GPU and DMA engines. ARM has -developed a HW assisted tracing solution by means of different components, each -being added to a design at synthesis time to cater to specific tracing needs. -Components are generally categorised as source, link and sinks and are -(usually) discovered using the AMBA bus. - -"Sources" generate a compressed stream representing the processor instruction -path based on tracing scenarios as configured by users. From there the stream -flows through the coresight system (via ATB bus) using links that are connecting -the emanating source to a sink(s). Sinks serve as endpoints to the coresight -implementation, either storing the compressed stream in a memory buffer or -creating an interface to the outside world where data can be transferred to a -host without fear of filling up the onboard coresight memory buffer. - -At typical coresight system would look like this: - - ***************************************************************** - **************************** AMBA AXI ****************************===|| - ***************************************************************** || - ^ ^ | || - | | * ** - 0000000 ::::: 0000000 ::::: ::::: @@@@@@@ |||||||||||| - 0 CPU 0<-->: C : 0 CPU 0<-->: C : : C : @ STM @ || System || - |->0000000 : T : |->0000000 : T : : T :<--->@@@@@ || Memory || - | #######<-->: I : | #######<-->: I : : I : @@@<-| |||||||||||| - | # ETM # ::::: | # PTM # ::::: ::::: @ | - | ##### ^ ^ | ##### ^ ! ^ ! . | ||||||||| - | |->### | ! | |->### | ! | ! . | || DAP || - | | # | ! | | # | ! | ! . | ||||||||| - | | . | ! | | . | ! | ! . | | | - | | . | ! | | . | ! | ! . | | * - | | . | ! | | . | ! | ! . | | SWD/ - | | . | ! | | . | ! | ! . | | JTAG - *****************************************************************<-| - *************************** AMBA Debug APB ************************ - ***************************************************************** - | . ! . ! ! . | - | . * . * * . | - ***************************************************************** - ******************** Cross Trigger Matrix (CTM) ******************* - ***************************************************************** - | . ^ . . | - | * ! * * | - ***************************************************************** - ****************** AMBA Advanced Trace Bus (ATB) ****************** - ***************************************************************** - | ! =============== | - | * ===== F =====<---------| - | ::::::::: ==== U ==== - |-->:: CTI ::<!! === N === - | ::::::::: ! == N == - | ^ * == E == - | ! &&&&&&&&& IIIIIII == L == - |------>&& ETB &&<......II I ======= - | ! &&&&&&&&& II I . - | ! I I . - | ! I REP I<.......... - | ! I I - | !!>&&&&&&&&& II I *Source: ARM ltd. - |------>& TPIU &<......II I DAP = Debug Access Port - &&&&&&&&& IIIIIII ETM = Embedded Trace Macrocell - ; PTM = Program Trace Macrocell - ; CTI = Cross Trigger Interface - * ETB = Embedded Trace Buffer - To trace port TPIU= Trace Port Interface Unit - SWD = Serial Wire Debug - -While on target configuration of the components is done via the APB bus, -all trace data are carried out-of-band on the ATB bus. The CTM provides -a way to aggregate and distribute signals between CoreSight components. - -The coresight framework provides a central point to represent, configure and -manage coresight devices on a platform. This first implementation centers on -the basic tracing functionality, enabling components such ETM/PTM, funnel, -replicator, TMC, TPIU and ETB. Future work will enable more -intricate IP blocks such as STM and CTI. - - -Acronyms and Classification ---------------------------- - -Acronyms: - -PTM: Program Trace Macrocell -ETM: Embedded Trace Macrocell -STM: System trace Macrocell -ETB: Embedded Trace Buffer -ITM: Instrumentation Trace Macrocell -TPIU: Trace Port Interface Unit -TMC-ETR: Trace Memory Controller, configured as Embedded Trace Router -TMC-ETF: Trace Memory Controller, configured as Embedded Trace FIFO -CTI: Cross Trigger Interface - -Classification: - -Source: - ETMv3.x ETMv4, PTMv1.0, PTMv1.1, STM, STM500, ITM -Link: - Funnel, replicator (intelligent or not), TMC-ETR -Sinks: - ETBv1.0, ETB1.1, TPIU, TMC-ETF -Misc: - CTI - - -Device Tree Bindings ----------------------- - -See Documentation/devicetree/bindings/arm/coresight.txt for details. - -As of this writing drivers for ITM, STMs and CTIs are not provided but are -expected to be added as the solution matures. - - -Framework and implementation ----------------------------- - -The coresight framework provides a central point to represent, configure and -manage coresight devices on a platform. Any coresight compliant device can -register with the framework for as long as they use the right APIs: - -struct coresight_device *coresight_register(struct coresight_desc *desc); -void coresight_unregister(struct coresight_device *csdev); - -The registering function is taking a "struct coresight_device *csdev" and -register the device with the core framework. The unregister function takes -a reference to a "struct coresight_device", obtained at registration time. - -If everything goes well during the registration process the new devices will -show up under /sys/bus/coresight/devices, as showns here for a TC2 platform: - -root:~# ls /sys/bus/coresight/devices/ -replicator 20030000.tpiu 2201c000.ptm 2203c000.etm 2203e000.etm -20010000.etb 20040000.funnel 2201d000.ptm 2203d000.etm -root:~# - -The functions take a "struct coresight_device", which looks like this: - -struct coresight_desc { - enum coresight_dev_type type; - struct coresight_dev_subtype subtype; - const struct coresight_ops *ops; - struct coresight_platform_data *pdata; - struct device *dev; - const struct attribute_group **groups; -}; - - -The "coresight_dev_type" identifies what the device is, i.e, source link or -sink while the "coresight_dev_subtype" will characterise that type further. - -The "struct coresight_ops" is mandatory and will tell the framework how to -perform base operations related to the components, each component having -a different set of requirement. For that "struct coresight_ops_sink", -"struct coresight_ops_link" and "struct coresight_ops_source" have been -provided. - -The next field, "struct coresight_platform_data *pdata" is acquired by calling -"of_get_coresight_platform_data()", as part of the driver's _probe routine and -"struct device *dev" gets the device reference embedded in the "amba_device": - -static int etm_probe(struct amba_device *adev, const struct amba_id *id) -{ - ... - ... - drvdata->dev = &adev->dev; - ... -} - -Specific class of device (source, link, or sink) have generic operations -that can be performed on them (see "struct coresight_ops"). The -"**groups" is a list of sysfs entries pertaining to operations -specific to that component only. "Implementation defined" customisations are -expected to be accessed and controlled using those entries. - - -Device Naming scheme ------------------------- -The devices that appear on the "coresight" bus were named the same as their -parent devices, i.e, the real devices that appears on AMBA bus or the platform bus. -Thus the names were based on the Linux Open Firmware layer naming convention, -which follows the base physical address of the device followed by the device -type. e.g: - -root:~# ls /sys/bus/coresight/devices/ - 20010000.etf 20040000.funnel 20100000.stm 22040000.etm - 22140000.etm 230c0000.funnel 23240000.etm 20030000.tpiu - 20070000.etr 20120000.replicator 220c0000.funnel - 23040000.etm 23140000.etm 23340000.etm - -However, with the introduction of ACPI support, the names of the real -devices are a bit cryptic and non-obvious. Thus, a new naming scheme was -introduced to use more generic names based on the type of the device. The -following rules apply: - - 1) Devices that are bound to CPUs, are named based on the CPU logical - number. - - e.g, ETM bound to CPU0 is named "etm0" - - 2) All other devices follow a pattern, "<device_type_prefix>N", where : - - <device_type_prefix> - A prefix specific to the type of the device - N - a sequential number assigned based on the order - of probing. - - e.g, tmc_etf0, tmc_etr0, funnel0, funnel1 - -Thus, with the new scheme the devices could appear as : - -root:~# ls /sys/bus/coresight/devices/ - etm0 etm1 etm2 etm3 etm4 etm5 funnel0 - funnel1 funnel2 replicator0 stm0 tmc_etf0 tmc_etr0 tpiu0 - -Some of the examples below might refer to old naming scheme and some -to the newer scheme, to give a confirmation that what you see on your -system is not unexpected. One must use the "names" as they appear on -the system under specified locations. - -How to use the tracer modules ------------------------------ - -There are two ways to use the Coresight framework: 1) using the perf cmd line -tools and 2) interacting directly with the Coresight devices using the sysFS -interface. Preference is given to the former as using the sysFS interface -requires a deep understanding of the Coresight HW. The following sections -provide details on using both methods. - -1) Using the sysFS interface: - -Before trace collection can start, a coresight sink needs to be identified. -There is no limit on the amount of sinks (nor sources) that can be enabled at -any given moment. As a generic operation, all device pertaining to the sink -class will have an "active" entry in sysfs: - -root:/sys/bus/coresight/devices# ls -replicator 20030000.tpiu 2201c000.ptm 2203c000.etm 2203e000.etm -20010000.etb 20040000.funnel 2201d000.ptm 2203d000.etm -root:/sys/bus/coresight/devices# ls 20010000.etb -enable_sink status trigger_cntr -root:/sys/bus/coresight/devices# echo 1 > 20010000.etb/enable_sink -root:/sys/bus/coresight/devices# cat 20010000.etb/enable_sink -1 -root:/sys/bus/coresight/devices# - -At boot time the current etm3x driver will configure the first address -comparator with "_stext" and "_etext", essentially tracing any instruction -that falls within that range. As such "enabling" a source will immediately -trigger a trace capture: - -root:/sys/bus/coresight/devices# echo 1 > 2201c000.ptm/enable_source -root:/sys/bus/coresight/devices# cat 2201c000.ptm/enable_source -1 -root:/sys/bus/coresight/devices# cat 20010000.etb/status -Depth: 0x2000 -Status: 0x1 -RAM read ptr: 0x0 -RAM wrt ptr: 0x19d3 <----- The write pointer is moving -Trigger cnt: 0x0 -Control: 0x1 -Flush status: 0x0 -Flush ctrl: 0x2001 -root:/sys/bus/coresight/devices# - -Trace collection is stopped the same way: - -root:/sys/bus/coresight/devices# echo 0 > 2201c000.ptm/enable_source -root:/sys/bus/coresight/devices# - -The content of the ETB buffer can be harvested directly from /dev: - -root:/sys/bus/coresight/devices# dd if=/dev/20010000.etb \ -of=~/cstrace.bin - -64+0 records in -64+0 records out -32768 bytes (33 kB) copied, 0.00125258 s, 26.2 MB/s -root:/sys/bus/coresight/devices# - -The file cstrace.bin can be decompressed using "ptm2human", DS-5 or Trace32. - -Following is a DS-5 output of an experimental loop that increments a variable up -to a certain value. The example is simple and yet provides a glimpse of the -wealth of possibilities that coresight provides. - -Info Tracing enabled -Instruction 106378866 0x8026B53C E52DE004 false PUSH {lr} -Instruction 0 0x8026B540 E24DD00C false SUB sp,sp,#0xc -Instruction 0 0x8026B544 E3A03000 false MOV r3,#0 -Instruction 0 0x8026B548 E58D3004 false STR r3,[sp,#4] -Instruction 0 0x8026B54C E59D3004 false LDR r3,[sp,#4] -Instruction 0 0x8026B550 E3530004 false CMP r3,#4 -Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1 -Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4] -Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c -Timestamp Timestamp: 17106715833 -Instruction 319 0x8026B54C E59D3004 false LDR r3,[sp,#4] -Instruction 0 0x8026B550 E3530004 false CMP r3,#4 -Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1 -Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4] -Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c -Instruction 9 0x8026B54C E59D3004 false LDR r3,[sp,#4] -Instruction 0 0x8026B550 E3530004 false CMP r3,#4 -Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1 -Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4] -Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c -Instruction 7 0x8026B54C E59D3004 false LDR r3,[sp,#4] -Instruction 0 0x8026B550 E3530004 false CMP r3,#4 -Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1 -Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4] -Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c -Instruction 7 0x8026B54C E59D3004 false LDR r3,[sp,#4] -Instruction 0 0x8026B550 E3530004 false CMP r3,#4 -Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1 -Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4] -Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c -Instruction 10 0x8026B54C E59D3004 false LDR r3,[sp,#4] -Instruction 0 0x8026B550 E3530004 false CMP r3,#4 -Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1 -Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4] -Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c -Instruction 6 0x8026B560 EE1D3F30 false MRC p15,#0x0,r3,c13,c0,#1 -Instruction 0 0x8026B564 E1A0100D false MOV r1,sp -Instruction 0 0x8026B568 E3C12D7F false BIC r2,r1,#0x1fc0 -Instruction 0 0x8026B56C E3C2203F false BIC r2,r2,#0x3f -Instruction 0 0x8026B570 E59D1004 false LDR r1,[sp,#4] -Instruction 0 0x8026B574 E59F0010 false LDR r0,[pc,#16] ; [0x8026B58C] = 0x80550368 -Instruction 0 0x8026B578 E592200C false LDR r2,[r2,#0xc] -Instruction 0 0x8026B57C E59221D0 false LDR r2,[r2,#0x1d0] -Instruction 0 0x8026B580 EB07A4CF true BL {pc}+0x1e9344 ; 0x804548c4 -Info Tracing enabled -Instruction 13570831 0x8026B584 E28DD00C false ADD sp,sp,#0xc -Instruction 0 0x8026B588 E8BD8000 true LDM sp!,{pc} -Timestamp Timestamp: 17107041535 - -2) Using perf framework: - -Coresight tracers are represented using the Perf framework's Performance -Monitoring Unit (PMU) abstraction. As such the perf framework takes charge of -controlling when tracing gets enabled based on when the process of interest is -scheduled. When configured in a system, Coresight PMUs will be listed when -queried by the perf command line tool: - - linaro@linaro-nano:~$ ./perf list pmu - - List of pre-defined events (to be used in -e): - - cs_etm// [Kernel PMU event] - - linaro@linaro-nano:~$ - -Regardless of the number of tracers available in a system (usually equal to the -amount of processor cores), the "cs_etm" PMU will be listed only once. - -A Coresight PMU works the same way as any other PMU, i.e the name of the PMU is -listed along with configuration options within forward slashes '/'. Since a -Coresight system will typically have more than one sink, the name of the sink to -work with needs to be specified as an event option. -On newer kernels the available sinks are listed in sysFS under: -($SYSFS)/bus/event_source/devices/cs_etm/sinks/ - - root@localhost:/sys/bus/event_source/devices/cs_etm/sinks# ls - tmc_etf0 tmc_etr0 tpiu0 - -On older kernels, this may need to be found from the list of coresight devices, -available under ($SYSFS)/bus/coresight/devices/: - - root:~# ls /sys/bus/coresight/devices/ - etm0 etm1 etm2 etm3 etm4 etm5 funnel0 - funnel1 funnel2 replicator0 stm0 tmc_etf0 tmc_etr0 tpiu0 - - root@linaro-nano:~# perf record -e cs_etm/@tmc_etr0/u --per-thread program - -As mentioned above in section "Device Naming scheme", the names of the devices could -look different from what is used in the example above. One must use the device names -as it appears under the sysFS. - -The syntax within the forward slashes '/' is important. The '@' character -tells the parser that a sink is about to be specified and that this is the sink -to use for the trace session. - -More information on the above and other example on how to use Coresight with -the perf tools can be found in the "HOWTO.md" file of the openCSD gitHub -repository [3]. - -2.1) AutoFDO analysis using the perf tools: - -perf can be used to record and analyze trace of programs. - -Execution can be recorded using 'perf record' with the cs_etm event, -specifying the name of the sink to record to, e.g: - - perf record -e cs_etm/@tmc_etr0/u --per-thread - -The 'perf report' and 'perf script' commands can be used to analyze execution, -synthesizing instruction and branch events from the instruction trace. -'perf inject' can be used to replace the trace data with the synthesized events. -The --itrace option controls the type and frequency of synthesized events -(see perf documentation). - -Note that only 64-bit programs are currently supported - further work is -required to support instruction decode of 32-bit Arm programs. - - -Generating coverage files for Feedback Directed Optimization: AutoFDO ---------------------------------------------------------------------- - -'perf inject' accepts the --itrace option in which case tracing data is -removed and replaced with the synthesized events. e.g. - - perf inject --itrace --strip -i perf.data -o perf.data.new - -Below is an example of using ARM ETM for autoFDO. It requires autofdo -(https://github.com/google/autofdo) and gcc version 5. The bubble -sort example is from the AutoFDO tutorial (https://gcc.gnu.org/wiki/AutoFDO/Tutorial). - - $ gcc-5 -O3 sort.c -o sort - $ taskset -c 2 ./sort - Bubble sorting array of 30000 elements - 5910 ms - - $ perf record -e cs_etm/@tmc_etr0/u --per-thread taskset -c 2 ./sort - Bubble sorting array of 30000 elements - 12543 ms - [ perf record: Woken up 35 times to write data ] - [ perf record: Captured and wrote 69.640 MB perf.data ] - - $ perf inject -i perf.data -o inj.data --itrace=il64 --strip - $ create_gcov --binary=./sort --profile=inj.data --gcov=sort.gcov -gcov_version=1 - $ gcc-5 -O3 -fauto-profile=sort.gcov sort.c -o sort_autofdo - $ taskset -c 2 ./sort_autofdo - Bubble sorting array of 30000 elements - 5806 ms - - -How to use the STM module -------------------------- - -Using the System Trace Macrocell module is the same as the tracers - the only -difference is that clients are driving the trace capture rather -than the program flow through the code. - -As with any other CoreSight component, specifics about the STM tracer can be -found in sysfs with more information on each entry being found in [1]: - -root@genericarmv8:~# ls /sys/bus/coresight/devices/stm0 -enable_source hwevent_select port_enable subsystem uevent -hwevent_enable mgmt port_select traceid -root@genericarmv8:~# - -Like any other source a sink needs to be identified and the STM enabled before -being used: - -root@genericarmv8:~# echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink -root@genericarmv8:~# echo 1 > /sys/bus/coresight/devices/stm0/enable_source - -From there user space applications can request and use channels using the devfs -interface provided for that purpose by the generic STM API: - -root@genericarmv8:~# ls -l /dev/stm0 -crw------- 1 root root 10, 61 Jan 3 18:11 /dev/stm0 -root@genericarmv8:~# - -Details on how to use the generic STM API can be found here [2]. - -[1]. Documentation/ABI/testing/sysfs-bus-coresight-devices-stm -[2]. Documentation/trace/stm.rst -[3]. https://github.com/Linaro/perf-opencsd |