summaryrefslogtreecommitdiff
path: root/Documentation/virt
diff options
context:
space:
mode:
authorMauro Carvalho Chehab <mchehab+huawei@kernel.org>2020-02-10 09:02:59 +0300
committerPaolo Bonzini <pbonzini@redhat.com>2020-02-12 22:10:02 +0300
commit75e7fcdb4a6f394a6644ee1cfe193284945003b5 (patch)
treea81df8f1ca3e572f0297d5eb615d7eb5671d593d /Documentation/virt
parent5a0af4806c25aff4b2f8d2e24d635840ec58a87b (diff)
downloadlinux-75e7fcdb4a6f394a6644ee1cfe193284945003b5.tar.xz
docs: kvm: Convert locking.txt to ReST format
- Use document title and chapter markups; - Add markups for literal blocks; - use :field: for field descriptions; - Add blank lines and adjust indentation. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Diffstat (limited to 'Documentation/virt')
-rw-r--r--Documentation/virt/kvm/index.rst1
-rw-r--r--Documentation/virt/kvm/locking.rst243
-rw-r--r--Documentation/virt/kvm/locking.txt215
3 files changed, 244 insertions, 215 deletions
diff --git a/Documentation/virt/kvm/index.rst b/Documentation/virt/kvm/index.rst
index ac83bc588f7e..9be8f53b729d 100644
--- a/Documentation/virt/kvm/index.rst
+++ b/Documentation/virt/kvm/index.rst
@@ -12,6 +12,7 @@ KVM
cpuid
halt-polling
hypercalls
+ locking
msr
vcpu-requests
diff --git a/Documentation/virt/kvm/locking.rst b/Documentation/virt/kvm/locking.rst
new file mode 100644
index 000000000000..c02291beac3f
--- /dev/null
+++ b/Documentation/virt/kvm/locking.rst
@@ -0,0 +1,243 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================
+KVM Lock Overview
+=================
+
+1. Acquisition Orders
+---------------------
+
+The acquisition orders for mutexes are as follows:
+
+- kvm->lock is taken outside vcpu->mutex
+
+- kvm->lock is taken outside kvm->slots_lock and kvm->irq_lock
+
+- kvm->slots_lock is taken outside kvm->irq_lock, though acquiring
+ them together is quite rare.
+
+On x86, vcpu->mutex is taken outside kvm->arch.hyperv.hv_lock.
+
+Everything else is a leaf: no other lock is taken inside the critical
+sections.
+
+2. Exception
+------------
+
+Fast page fault:
+
+Fast page fault is the fast path which fixes the guest page fault out of
+the mmu-lock on x86. Currently, the page fault can be fast in one of the
+following two cases:
+
+1. Access Tracking: The SPTE is not present, but it is marked for access
+ tracking i.e. the SPTE_SPECIAL_MASK is set. That means we need to
+ restore the saved R/X bits. This is described in more detail later below.
+
+2. Write-Protection: The SPTE is present and the fault is
+ caused by write-protect. That means we just need to change the W bit of
+ the spte.
+
+What we use to avoid all the race is the SPTE_HOST_WRITEABLE bit and
+SPTE_MMU_WRITEABLE bit on the spte:
+
+- SPTE_HOST_WRITEABLE means the gfn is writable on host.
+- SPTE_MMU_WRITEABLE means the gfn is writable on mmu. The bit is set when
+ the gfn is writable on guest mmu and it is not write-protected by shadow
+ page write-protection.
+
+On fast page fault path, we will use cmpxchg to atomically set the spte W
+bit if spte.SPTE_HOST_WRITEABLE = 1 and spte.SPTE_WRITE_PROTECT = 1, or
+restore the saved R/X bits if VMX_EPT_TRACK_ACCESS mask is set, or both. This
+is safe because whenever changing these bits can be detected by cmpxchg.
+
+But we need carefully check these cases:
+
+1) The mapping from gfn to pfn
+
+The mapping from gfn to pfn may be changed since we can only ensure the pfn
+is not changed during cmpxchg. This is a ABA problem, for example, below case
+will happen:
+
++------------------------------------------------------------------------+
+| At the beginning:: |
+| |
+| gpte = gfn1 |
+| gfn1 is mapped to pfn1 on host |
+| spte is the shadow page table entry corresponding with gpte and |
+| spte = pfn1 |
++------------------------------------------------------------------------+
+| On fast page fault path: |
++------------------------------------+-----------------------------------+
+| CPU 0: | CPU 1: |
++------------------------------------+-----------------------------------+
+| :: | |
+| | |
+| old_spte = *spte; | |
++------------------------------------+-----------------------------------+
+| | pfn1 is swapped out:: |
+| | |
+| | spte = 0; |
+| | |
+| | pfn1 is re-alloced for gfn2. |
+| | |
+| | gpte is changed to point to |
+| | gfn2 by the guest:: |
+| | |
+| | spte = pfn1; |
++------------------------------------+-----------------------------------+
+| :: |
+| |
+| if (cmpxchg(spte, old_spte, old_spte+W) |
+| mark_page_dirty(vcpu->kvm, gfn1) |
+| OOPS!!! |
++------------------------------------------------------------------------+
+
+We dirty-log for gfn1, that means gfn2 is lost in dirty-bitmap.
+
+For direct sp, we can easily avoid it since the spte of direct sp is fixed
+to gfn. For indirect sp, before we do cmpxchg, we call gfn_to_pfn_atomic()
+to pin gfn to pfn, because after gfn_to_pfn_atomic():
+
+- We have held the refcount of pfn that means the pfn can not be freed and
+ be reused for another gfn.
+- The pfn is writable that means it can not be shared between different gfns
+ by KSM.
+
+Then, we can ensure the dirty bitmaps is correctly set for a gfn.
+
+Currently, to simplify the whole things, we disable fast page fault for
+indirect shadow page.
+
+2) Dirty bit tracking
+
+In the origin code, the spte can be fast updated (non-atomically) if the
+spte is read-only and the Accessed bit has already been set since the
+Accessed bit and Dirty bit can not be lost.
+
+But it is not true after fast page fault since the spte can be marked
+writable between reading spte and updating spte. Like below case:
+
++------------------------------------------------------------------------+
+| At the beginning:: |
+| |
+| spte.W = 0 |
+| spte.Accessed = 1 |
++------------------------------------+-----------------------------------+
+| CPU 0: | CPU 1: |
++------------------------------------+-----------------------------------+
+| In mmu_spte_clear_track_bits():: | |
+| | |
+| old_spte = *spte; | |
+| | |
+| | |
+| /* 'if' condition is satisfied. */| |
+| if (old_spte.Accessed == 1 && | |
+| old_spte.W == 0) | |
+| spte = 0ull; | |
++------------------------------------+-----------------------------------+
+| | on fast page fault path:: |
+| | |
+| | spte.W = 1 |
+| | |
+| | memory write on the spte:: |
+| | |
+| | spte.Dirty = 1 |
++------------------------------------+-----------------------------------+
+| :: | |
+| | |
+| else | |
+| old_spte = xchg(spte, 0ull) | |
+| if (old_spte.Accessed == 1) | |
+| kvm_set_pfn_accessed(spte.pfn);| |
+| if (old_spte.Dirty == 1) | |
+| kvm_set_pfn_dirty(spte.pfn); | |
+| OOPS!!! | |
++------------------------------------+-----------------------------------+
+
+The Dirty bit is lost in this case.
+
+In order to avoid this kind of issue, we always treat the spte as "volatile"
+if it can be updated out of mmu-lock, see spte_has_volatile_bits(), it means,
+the spte is always atomically updated in this case.
+
+3) flush tlbs due to spte updated
+
+If the spte is updated from writable to readonly, we should flush all TLBs,
+otherwise rmap_write_protect will find a read-only spte, even though the
+writable spte might be cached on a CPU's TLB.
+
+As mentioned before, the spte can be updated to writable out of mmu-lock on
+fast page fault path, in order to easily audit the path, we see if TLBs need
+be flushed caused by this reason in mmu_spte_update() since this is a common
+function to update spte (present -> present).
+
+Since the spte is "volatile" if it can be updated out of mmu-lock, we always
+atomically update the spte, the race caused by fast page fault can be avoided,
+See the comments in spte_has_volatile_bits() and mmu_spte_update().
+
+Lockless Access Tracking:
+
+This is used for Intel CPUs that are using EPT but do not support the EPT A/D
+bits. In this case, when the KVM MMU notifier is called to track accesses to a
+page (via kvm_mmu_notifier_clear_flush_young), it marks the PTE as not-present
+by clearing the RWX bits in the PTE and storing the original R & X bits in
+some unused/ignored bits. In addition, the SPTE_SPECIAL_MASK is also set on the
+PTE (using the ignored bit 62). When the VM tries to access the page later on,
+a fault is generated and the fast page fault mechanism described above is used
+to atomically restore the PTE to a Present state. The W bit is not saved when
+the PTE is marked for access tracking and during restoration to the Present
+state, the W bit is set depending on whether or not it was a write access. If
+it wasn't, then the W bit will remain clear until a write access happens, at
+which time it will be set using the Dirty tracking mechanism described above.
+
+3. Reference
+------------
+
+:Name: kvm_lock
+:Type: mutex
+:Arch: any
+:Protects: - vm_list
+
+:Name: kvm_count_lock
+:Type: raw_spinlock_t
+:Arch: any
+:Protects: - hardware virtualization enable/disable
+:Comment: 'raw' because hardware enabling/disabling must be atomic /wrt
+ migration.
+
+:Name: kvm_arch::tsc_write_lock
+:Type: raw_spinlock
+:Arch: x86
+:Protects: - kvm_arch::{last_tsc_write,last_tsc_nsec,last_tsc_offset}
+ - tsc offset in vmcb
+:Comment: 'raw' because updating the tsc offsets must not be preempted.
+
+:Name: kvm->mmu_lock
+:Type: spinlock_t
+:Arch: any
+:Protects: -shadow page/shadow tlb entry
+:Comment: it is a spinlock since it is used in mmu notifier.
+
+:Name: kvm->srcu
+:Type: srcu lock
+:Arch: any
+:Protects: - kvm->memslots
+ - kvm->buses
+:Comment: The srcu read lock must be held while accessing memslots (e.g.
+ when using gfn_to_* functions) and while accessing in-kernel
+ MMIO/PIO address->device structure mapping (kvm->buses).
+ The srcu index can be stored in kvm_vcpu->srcu_idx per vcpu
+ if it is needed by multiple functions.
+
+:Name: blocked_vcpu_on_cpu_lock
+:Type: spinlock_t
+:Arch: x86
+:Protects: blocked_vcpu_on_cpu
+:Comment: This is a per-CPU lock and it is used for VT-d posted-interrupts.
+ When VT-d posted-interrupts is supported and the VM has assigned
+ devices, we put the blocked vCPU on the list blocked_vcpu_on_cpu
+ protected by blocked_vcpu_on_cpu_lock, when VT-d hardware issues
+ wakeup notification event since external interrupts from the
+ assigned devices happens, we will find the vCPU on the list to
+ wakeup.
diff --git a/Documentation/virt/kvm/locking.txt b/Documentation/virt/kvm/locking.txt
deleted file mode 100644
index 635cd6eaf714..000000000000
--- a/Documentation/virt/kvm/locking.txt
+++ /dev/null
@@ -1,215 +0,0 @@
-KVM Lock Overview
-=================
-
-1. Acquisition Orders
----------------------
-
-The acquisition orders for mutexes are as follows:
-
-- kvm->lock is taken outside vcpu->mutex
-
-- kvm->lock is taken outside kvm->slots_lock and kvm->irq_lock
-
-- kvm->slots_lock is taken outside kvm->irq_lock, though acquiring
- them together is quite rare.
-
-On x86, vcpu->mutex is taken outside kvm->arch.hyperv.hv_lock.
-
-Everything else is a leaf: no other lock is taken inside the critical
-sections.
-
-2: Exception
-------------
-
-Fast page fault:
-
-Fast page fault is the fast path which fixes the guest page fault out of
-the mmu-lock on x86. Currently, the page fault can be fast in one of the
-following two cases:
-
-1. Access Tracking: The SPTE is not present, but it is marked for access
-tracking i.e. the SPTE_SPECIAL_MASK is set. That means we need to
-restore the saved R/X bits. This is described in more detail later below.
-
-2. Write-Protection: The SPTE is present and the fault is
-caused by write-protect. That means we just need to change the W bit of the
-spte.
-
-What we use to avoid all the race is the SPTE_HOST_WRITEABLE bit and
-SPTE_MMU_WRITEABLE bit on the spte:
-- SPTE_HOST_WRITEABLE means the gfn is writable on host.
-- SPTE_MMU_WRITEABLE means the gfn is writable on mmu. The bit is set when
- the gfn is writable on guest mmu and it is not write-protected by shadow
- page write-protection.
-
-On fast page fault path, we will use cmpxchg to atomically set the spte W
-bit if spte.SPTE_HOST_WRITEABLE = 1 and spte.SPTE_WRITE_PROTECT = 1, or
-restore the saved R/X bits if VMX_EPT_TRACK_ACCESS mask is set, or both. This
-is safe because whenever changing these bits can be detected by cmpxchg.
-
-But we need carefully check these cases:
-1): The mapping from gfn to pfn
-The mapping from gfn to pfn may be changed since we can only ensure the pfn
-is not changed during cmpxchg. This is a ABA problem, for example, below case
-will happen:
-
-At the beginning:
-gpte = gfn1
-gfn1 is mapped to pfn1 on host
-spte is the shadow page table entry corresponding with gpte and
-spte = pfn1
-
- VCPU 0 VCPU0
-on fast page fault path:
-
- old_spte = *spte;
- pfn1 is swapped out:
- spte = 0;
-
- pfn1 is re-alloced for gfn2.
-
- gpte is changed to point to
- gfn2 by the guest:
- spte = pfn1;
-
- if (cmpxchg(spte, old_spte, old_spte+W)
- mark_page_dirty(vcpu->kvm, gfn1)
- OOPS!!!
-
-We dirty-log for gfn1, that means gfn2 is lost in dirty-bitmap.
-
-For direct sp, we can easily avoid it since the spte of direct sp is fixed
-to gfn. For indirect sp, before we do cmpxchg, we call gfn_to_pfn_atomic()
-to pin gfn to pfn, because after gfn_to_pfn_atomic():
-- We have held the refcount of pfn that means the pfn can not be freed and
- be reused for another gfn.
-- The pfn is writable that means it can not be shared between different gfns
- by KSM.
-
-Then, we can ensure the dirty bitmaps is correctly set for a gfn.
-
-Currently, to simplify the whole things, we disable fast page fault for
-indirect shadow page.
-
-2): Dirty bit tracking
-In the origin code, the spte can be fast updated (non-atomically) if the
-spte is read-only and the Accessed bit has already been set since the
-Accessed bit and Dirty bit can not be lost.
-
-But it is not true after fast page fault since the spte can be marked
-writable between reading spte and updating spte. Like below case:
-
-At the beginning:
-spte.W = 0
-spte.Accessed = 1
-
- VCPU 0 VCPU0
-In mmu_spte_clear_track_bits():
-
- old_spte = *spte;
-
- /* 'if' condition is satisfied. */
- if (old_spte.Accessed == 1 &&
- old_spte.W == 0)
- spte = 0ull;
- on fast page fault path:
- spte.W = 1
- memory write on the spte:
- spte.Dirty = 1
-
-
- else
- old_spte = xchg(spte, 0ull)
-
-
- if (old_spte.Accessed == 1)
- kvm_set_pfn_accessed(spte.pfn);
- if (old_spte.Dirty == 1)
- kvm_set_pfn_dirty(spte.pfn);
- OOPS!!!
-
-The Dirty bit is lost in this case.
-
-In order to avoid this kind of issue, we always treat the spte as "volatile"
-if it can be updated out of mmu-lock, see spte_has_volatile_bits(), it means,
-the spte is always atomically updated in this case.
-
-3): flush tlbs due to spte updated
-If the spte is updated from writable to readonly, we should flush all TLBs,
-otherwise rmap_write_protect will find a read-only spte, even though the
-writable spte might be cached on a CPU's TLB.
-
-As mentioned before, the spte can be updated to writable out of mmu-lock on
-fast page fault path, in order to easily audit the path, we see if TLBs need
-be flushed caused by this reason in mmu_spte_update() since this is a common
-function to update spte (present -> present).
-
-Since the spte is "volatile" if it can be updated out of mmu-lock, we always
-atomically update the spte, the race caused by fast page fault can be avoided,
-See the comments in spte_has_volatile_bits() and mmu_spte_update().
-
-Lockless Access Tracking:
-
-This is used for Intel CPUs that are using EPT but do not support the EPT A/D
-bits. In this case, when the KVM MMU notifier is called to track accesses to a
-page (via kvm_mmu_notifier_clear_flush_young), it marks the PTE as not-present
-by clearing the RWX bits in the PTE and storing the original R & X bits in
-some unused/ignored bits. In addition, the SPTE_SPECIAL_MASK is also set on the
-PTE (using the ignored bit 62). When the VM tries to access the page later on,
-a fault is generated and the fast page fault mechanism described above is used
-to atomically restore the PTE to a Present state. The W bit is not saved when
-the PTE is marked for access tracking and during restoration to the Present
-state, the W bit is set depending on whether or not it was a write access. If
-it wasn't, then the W bit will remain clear until a write access happens, at
-which time it will be set using the Dirty tracking mechanism described above.
-
-3. Reference
-------------
-
-Name: kvm_lock
-Type: mutex
-Arch: any
-Protects: - vm_list
-
-Name: kvm_count_lock
-Type: raw_spinlock_t
-Arch: any
-Protects: - hardware virtualization enable/disable
-Comment: 'raw' because hardware enabling/disabling must be atomic /wrt
- migration.
-
-Name: kvm_arch::tsc_write_lock
-Type: raw_spinlock
-Arch: x86
-Protects: - kvm_arch::{last_tsc_write,last_tsc_nsec,last_tsc_offset}
- - tsc offset in vmcb
-Comment: 'raw' because updating the tsc offsets must not be preempted.
-
-Name: kvm->mmu_lock
-Type: spinlock_t
-Arch: any
-Protects: -shadow page/shadow tlb entry
-Comment: it is a spinlock since it is used in mmu notifier.
-
-Name: kvm->srcu
-Type: srcu lock
-Arch: any
-Protects: - kvm->memslots
- - kvm->buses
-Comment: The srcu read lock must be held while accessing memslots (e.g.
- when using gfn_to_* functions) and while accessing in-kernel
- MMIO/PIO address->device structure mapping (kvm->buses).
- The srcu index can be stored in kvm_vcpu->srcu_idx per vcpu
- if it is needed by multiple functions.
-
-Name: blocked_vcpu_on_cpu_lock
-Type: spinlock_t
-Arch: x86
-Protects: blocked_vcpu_on_cpu
-Comment: This is a per-CPU lock and it is used for VT-d posted-interrupts.
- When VT-d posted-interrupts is supported and the VM has assigned
- devices, we put the blocked vCPU on the list blocked_vcpu_on_cpu
- protected by blocked_vcpu_on_cpu_lock, when VT-d hardware issues
- wakeup notification event since external interrupts from the
- assigned devices happens, we will find the vCPU on the list to
- wakeup.