summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-08-06 03:18:13 +0400
committerLinus Torvalds <torvalds@linux-foundation.org>2014-08-06 03:18:13 +0400
commit1325b6550a7b9cda52ee4c0da04fa9f93d2618fc (patch)
tree07c5f64e7c3484a21553378ca3f256a3ce569b85 /Documentation
parentdc7aafba6bfa1ea5806c6ac402e690682f950f75 (diff)
parentfab6a0410d20ef09238ef54b8726d170578da752 (diff)
downloadlinux-1325b6550a7b9cda52ee4c0da04fa9f93d2618fc.tar.xz
Merge tag 'spi-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown: "A quiet release, more bug fixes than anything else. A few things do stand out though: - updates to several drivers to move towards the standard GPIO chip select handling in the core. - DMA support for the SH MSIOF driver. - support for Rockchip SPI controllers (their first mainline submission)" * tag 'spi-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (64 commits) spi: davinci: use spi_device.cs_gpio to store gpio cs per spi device spi: davinci: add support to configure gpio cs through dt spi/pl022: Explicitly truncate large bitmask spi/atmel: Fix pointer to int conversion warnings on 64 bit builds spi: davinci: fix to support more than 2 chip selects spi: topcliff-pch: don't hardcode PCI slot to get DMA device spi: orion: fix incorrect handling of cell-index DT property spi: orion: Fix error return code in orion_spi_probe() spi/rockchip: fix error return code in rockchip_spi_probe() spi/rockchip: remove redundant dev_err call in rockchip_spi_probe() spi/rockchip: remove duplicated include from spi-rockchip.c ARM: dts: fix the chip select gpios definition in the SPI nodes spi: s3c64xx: Update binding documentation spi: s3c64xx: use the generic SPI "cs-gpios" property spi: s3c64xx: Revert "spi: s3c64xx: Added provision for dedicated cs pin" spi: atmel: Use dmaengine_prep_slave_sg() API spi: topcliff-pch: Update error messages for dmaengine_prep_slave_sg() API spi: sh-msiof: Use correct device for DMA mapping with IOMMU spi: sh-msiof: Handle dmaengine_prep_slave_single() failures gracefully spi: rspi: Handle dmaengine_prep_slave_sg() failures gracefully ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/spi/efm32-spi.txt13
-rw-r--r--Documentation/devicetree/bindings/spi/qcom,spi-qup.txt6
-rw-r--r--Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt28
-rw-r--r--Documentation/devicetree/bindings/spi/spi-davinci.txt9
-rw-r--r--Documentation/devicetree/bindings/spi/spi-rockchip.txt37
-rw-r--r--Documentation/devicetree/bindings/spi/spi-samsung.txt26
6 files changed, 97 insertions, 22 deletions
diff --git a/Documentation/devicetree/bindings/spi/efm32-spi.txt b/Documentation/devicetree/bindings/spi/efm32-spi.txt
index 130cd17e3680..750e29aff9bc 100644
--- a/Documentation/devicetree/bindings/spi/efm32-spi.txt
+++ b/Documentation/devicetree/bindings/spi/efm32-spi.txt
@@ -10,11 +10,12 @@ Required properties:
- cs-gpios: see spi-bus.txt
Recommended properties :
-- efm32,location: Value to write to the ROUTE register's LOCATION bitfield to
- configure the pinmux for the device, see datasheet for values.
- If "efm32,location" property is not provided, keeping what is
- already configured in the hardware, so its either the reset
- default 0 or whatever the bootloader did.
+- energymicro,location: Value to write to the ROUTE register's LOCATION
+ bitfield to configure the pinmux for the device, see
+ datasheet for values.
+ If this property is not provided, keeping what is
+ already configured in the hardware, so its either the
+ reset default 0 or whatever the bootloader did.
Example:
@@ -26,7 +27,7 @@ spi1: spi@0x4000c400 { /* USART1 */
interrupts = <15 16>;
clocks = <&cmu 20>;
cs-gpios = <&gpio 51 1>; // D3
- efm32,location = <1>;
+ energymicro,location = <1>;
status = "ok";
ks8851@0 {
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
index bee6ff204baf..e2c88df2cc15 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
@@ -7,7 +7,11 @@ SPI in master mode supports up to 50MHz, up to four chip selects, programmable
data path from 4 bits to 32 bits and numerous protocol variants.
Required properties:
-- compatible: Should contain "qcom,spi-qup-v2.1.1" or "qcom,spi-qup-v2.2.1"
+- compatible: Should contain:
+ "qcom,spi-qup-v1.1.1" for 8660, 8960 and 8064.
+ "qcom,spi-qup-v2.1.1" for 8974 and later
+ "qcom,spi-qup-v2.2.1" for 8974 v2 and later.
+
- reg: Should contain base register location and length
- interrupts: Interrupt number used by this controller
diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
new file mode 100644
index 000000000000..bd99193e87b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
@@ -0,0 +1,28 @@
+Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface.
+
+Required properties:
+- compatible : "snps,dw-apb-ssi"
+- reg : The register base for the controller.
+- interrupts : One interrupt, used by the controller.
+- #address-cells : <1>, as required by generic SPI binding.
+- #size-cells : <0>, also as required by generic SPI binding.
+
+Optional properties:
+- cs-gpios : Specifies the gpio pis to be used for chipselects.
+- num-cs : The number of chipselects. If omitted, this will default to 4.
+
+Child nodes as per the generic SPI binding.
+
+Example:
+
+ spi@fff00000 {
+ compatible = "snps,dw-apb-ssi";
+ reg = <0xfff00000 0x1000>;
+ interrupts = <0 154 4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ num-cs = <2>;
+ cs-gpios = <&gpio0 13 0>,
+ <&gpio0 14 0>;
+ };
+
diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt
index 6d0ac8d0ad9b..f80887bca0d6 100644
--- a/Documentation/devicetree/bindings/spi/spi-davinci.txt
+++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt
@@ -8,7 +8,8 @@ Required properties:
- "ti,dm6441-spi" for SPI used similar to that on DM644x SoC family
- "ti,da830-spi" for SPI used similar to that on DA8xx SoC family
- reg: Offset and length of SPI controller register space
-- num-cs: Number of chip selects
+- num-cs: Number of chip selects. This includes internal as well as
+ GPIO chip selects.
- ti,davinci-spi-intr-line: interrupt line used to connect the SPI
IP to the interrupt controller within the SoC. Possible values
are 0 and 1. Manual says one of the two possible interrupt
@@ -17,6 +18,12 @@ Required properties:
- interrupts: interrupt number mapped to CPU.
- clocks: spi clk phandle
+Optional:
+- cs-gpios: gpio chip selects
+ For example to have 3 internal CS and 2 GPIO CS, user could define
+ cs-gpios = <0>, <0>, <0>, <&gpio1 30 0>, <&gpio1 31 0>;
+ where first three are internal CS and last two are GPIO CS.
+
Example of a NOR flash slave device (n25q032) connected to DaVinci
SPI controller device over the SPI bus.
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
new file mode 100644
index 000000000000..7bab35575817
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
@@ -0,0 +1,37 @@
+* Rockchip SPI Controller
+
+The Rockchip SPI controller is used to interface with various devices such as flash
+and display controllers using the SPI communication interface.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ "rockchip,rk3066-spi" for rk3066.
+ "rockchip,rk3188-spi", "rockchip,rk3066-spi" for rk3188.
+ "rockchip,rk3288-spi", "rockchip,rk3066-spi" for rk3288.
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: The interrupt number to the cpu. The interrupt specifier format
+ depends on the interrupt controller.
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for
+ the peripheral clock.
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+ Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request names should include "tx" and "rx" if present.
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+
+Example:
+
+ spi0: spi@ff110000 {
+ compatible = "rockchip,rk3066-spi";
+ reg = <0xff110000 0x1000>;
+ dmas = <&pdma1 11>, <&pdma1 12>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+ clock-names = "spiclk", "apb_pclk";
+ };
diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt
index 86aa061f069f..792efbaedc54 100644
--- a/Documentation/devicetree/bindings/spi/spi-samsung.txt
+++ b/Documentation/devicetree/bindings/spi/spi-samsung.txt
@@ -18,14 +18,11 @@ Required SoC Specific Properties:
- interrupts: The interrupt number to the cpu. The interrupt specifier format
depends on the interrupt controller.
-[PRELIMINARY: the dma channel allocation will change once there are
-official DMA bindings]
+- dmas : Two or more DMA channel specifiers following the convention outlined
+ in bindings/dma/dma.txt
-- tx-dma-channel: The dma channel specifier for tx operations. The format of
- the dma specifier depends on the dma controller.
-
-- rx-dma-channel: The dma channel specifier for rx operations. The format of
- the dma specifier depends on the dma controller.
+- dma-names: Names for the dma channels. There must be at least one channel
+ named "tx" for transmit and named "rx" for receive.
Required Board Specific Properties:
@@ -42,15 +39,13 @@ Optional Board Specific Properties:
- num-cs: Specifies the number of chip select lines supported. If
not specified, the default number of chip select lines is set to 1.
+- cs-gpios: should specify GPIOs used for chipselects (see spi-bus.txt)
+
SPI Controller specific data in SPI slave nodes:
- The spi slave nodes should provide the following information which is required
by the spi controller.
- - cs-gpio: A gpio specifier that specifies the gpio line used as
- the slave select line by the spi controller. The format of the gpio
- specifier depends on the gpio controller.
-
- samsung,spi-feedback-delay: The sampling phase shift to be applied on the
miso line (to account for any lag in the miso line). The following are the
valid values.
@@ -74,8 +69,11 @@ Example:
compatible = "samsung,exynos4210-spi";
reg = <0x12d20000 0x100>;
interrupts = <0 66 0>;
- tx-dma-channel = <&pdma0 5>;
- rx-dma-channel = <&pdma0 4>;
+ dmas = <&pdma0 5
+ &pdma0 4>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
- Board Specific Portion:
@@ -85,6 +83,7 @@ Example:
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi0_bus>;
+ cs-gpios = <&gpa2 5 0>;
w25q80bw@0 {
#address-cells = <1>;
@@ -94,7 +93,6 @@ Example:
spi-max-frequency = <10000>;
controller-data {
- cs-gpio = <&gpa2 5 1 0 3>;
samsung,spi-feedback-delay = <0>;
};