summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-04-14 00:53:03 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2015-04-14 00:53:03 +0300
commit8d9095c667a185c8e2449632343a2b6c65ae58f1 (patch)
tree738cdc0e1e5c96738c31ea327ac0d741349d3757 /Documentation
parent1a370f4cd95e056d55ef5bf1a183880e70195e59 (diff)
parent69f0fb2a592fc9ebc5e3e55178055d1cff31d479 (diff)
downloadlinux-8d9095c667a185c8e2449632343a2b6c65ae58f1.tar.xz
Merge tag 'mmc-v4.1' of git://git.linaro.org/people/ulf.hansson/mmc
Pull MMC updates from Ulf Hansson: "MMC core: - Add support for marking HPI as broken through devicetree - Enable runtime PM management of host devices - Remove the ->enable|disable() callbacks - Restructure code and cleanups - Refreshed some of the MMC sections in MAINTAINERS MMC host: - dw_mmc: HS400 mode support - dw_mmc: Add the cmd11 timer to detect a timeout - dw_mmc: Endian agnostic IO accessors - dw_mmc: Bugfixes - sh_mmcif: Add exclusion between cmd and interrupt - omap_hsmmc: Hibernation support - omap_hsmmc: Rework and simplify cover/card detect - omap_hsmmc: Stop using ->enable|disable() callbacks - atmel-mci: Endian agnostic IO - sunxi: Enable MMC_CAP_SDIO_IRQ - sdhci-st: Add support for the stih407 family silicon - sdhci-st: UHS card support in SDR104 mode - sdhci-st: HS200 mode support - sdhci-esdhc-imx: Use common mmc DT parser - sdhci-of-arasan: Use common mmc DT parser - sdhci-iproc: Add new driver for Broadcom IPROC SDHCI controller - sdhci-tegra: Convert to GPIO descriptors - sdhci-tegra: Optmize write_w path for tegra114 and later - sdhci-sirf: Update tuning procedure - sdhci: Fix card presence logic - sdhci: Cleanups and consolidation" * tag 'mmc-v4.1' of git://git.linaro.org/people/ulf.hansson/mmc: (79 commits) mmc: sdhci-st: Update ST SDHCI binding documentation. mmc: sdhci-st: Update the quirks for this controller. mmc: sdhci-st: Add sdhci_st_set_uhs_signaling function. mmc: sdhci-st: Add st_mmcss_cconfig function to configure mmcss glue registers. mmc: sdhci-st: Add delay management functions for top registers (eMMC). mmc: sdhci-st: Add support for de-asserting reset signal and top regs resource mmc: sdhci-st: Add macros for register offsets and bitfields for mmcss glue regs mmc: sdhci-esdhc-imx: Call mmc_of_parse() mmc: dw_mmc: Add locking around cmd11 timer mmc: dw_mmc: Add a return in an unexpected cmd11 timeout mmc: dw_mmc: Increase cmd11 timeout to 500ms mmc: dw_mmc: fix fifo ordering in big endian mmc: dw_mmc: change idmac descriptor files to __le32 mmc: dw_mmc: make IO accessors endian agnostic mmc: core: Convert the error field in struct mmc_command|data into an int mmc: sdhci-of-arasan: Call OF parsing for MMC mmc: sdhci-pci: fix 64 BIT DMA quirks for rtsx mmc: Add support for marking hpi as broken through devicetree mmc: sdhci-tegra: convert to use GPIO descriptors mmc: omap_hsmmc: use generic slot-gpio isr to manage card detect pin ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt23
-rw-r--r--Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt7
-rw-r--r--Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt4
-rw-r--r--Documentation/devicetree/bindings/mmc/mmc-card.txt31
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-st.txt100
5 files changed, 155 insertions, 10 deletions
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
new file mode 100644
index 000000000000..72cc9cc95880
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
@@ -0,0 +1,23 @@
+Broadcom IPROC SDHCI controller
+
+This file documents differences between the core properties described
+by mmc.txt and the properties that represent the IPROC SDHCI controller.
+
+Required properties:
+- compatible : Should be "brcm,sdhci-iproc-cygnus".
+- clocks : The clock feeding the SDHCI controller.
+
+Optional properties:
+ - sdhci,auto-cmd12: specifies that controller should use auto CMD12.
+
+Example:
+
+sdhci0: sdhci@0x18041000 {
+ compatible = "brcm,sdhci-iproc-cygnus";
+ reg = <0x18041000 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lcpll0_clks BCM_CYGNUS_LCPLL0_SDIO_CLK>;
+ bus-width = <4>;
+ sdhci,auto-cmd12;
+ no-1-8-v;
+};
diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
index ee4fc0576c7d..aad98442788b 100644
--- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
@@ -36,6 +36,8 @@ Required Properties:
in transmit mode and CIU clock phase shift value in receive mode for double
data rate mode operation. Refer notes below for the order of the cells and the
valid values.
+* samsung,dw-mshc-hs400-timing: Specifies the value of CIU TX and RX clock phase
+ shift value for hs400 mode operation.
Notes for the sdr-timing and ddr-timing values:
@@ -50,6 +52,9 @@ Required Properties:
- if CIU clock divider value is 0 (that is divide by 1), both tx and rx
phase shift clocks should be 0.
+* samsung,read-strobe-delay: RCLK (Data strobe) delay to control HS400 mode
+ (Latency value for delay line in Read path)
+
Required properties for a slot (Deprecated - Recommend to use one slot per host):
* gpios: specifies a list of gpios used for command, clock and data bus. The
@@ -82,5 +87,7 @@ Example:
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
+ samsung,dw-mshc-hs400-timing = <0 2>;
+ samsung,read-strobe-delay = <90>;
bus-width = <8>;
};
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
index 9046ba06c47a..415c5575cbf7 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
@@ -17,6 +17,10 @@ Optional properties:
to select a proper data sampling window in case the clock quality is not good
due to signal path is too long on the board. Please refer to eSDHC/uSDHC
chapter, DLL (Delay Line) section in RM for details.
+- voltage-ranges : Specify the voltage range in case there are software
+ transparent level shifters on the outputs of the controller. Two cells are
+ required, first cell specifies minimum slot voltage (mV), second cell
+ specifies maximum slot voltage (mV). Several ranges could be specified.
Examples:
diff --git a/Documentation/devicetree/bindings/mmc/mmc-card.txt b/Documentation/devicetree/bindings/mmc/mmc-card.txt
new file mode 100644
index 000000000000..a70fcd65b9ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-card.txt
@@ -0,0 +1,31 @@
+mmc-card / eMMC bindings
+------------------------
+
+This documents describes the devicetree bindings for a mmc-host controller
+child node describing a mmc-card / an eMMC, see "Use of Function subnodes"
+in mmc.txt
+
+Required properties:
+-compatible : Must be "mmc-card"
+-reg : Must be <0>
+
+Optional properties:
+-broken-hpi : Use this to indicate that the mmc-card has a broken hpi
+ implementation, and that hpi should not be used
+
+Example:
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_a>;
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+
+ mmccard: mmccard@0 {
+ reg = <0>;
+ compatible = "mmc-card";
+ broken-hpi;
+ };
+};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
index 7527db447a35..18d950df2749 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
@@ -5,20 +5,62 @@ Documentation/devicetree/bindings/mmc/mmc.txt and the properties
used by the sdhci-st driver.
Required properties:
-- compatible : Must be "st,sdhci"
-- clock-names : Should be "mmc"
- See: Documentation/devicetree/bindings/resource-names.txt
-- clocks : Phandle of the clock used by the sdhci controler
- See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+- compatible: Must be "st,sdhci" and it can be compatible to "st,sdhci-stih407"
+ to set the internal glue logic used for configuring the MMC
+ subsystem (mmcss) inside the FlashSS (available in STiH407 SoC
+ family).
+
+- clock-names: Should be "mmc".
+ See: Documentation/devicetree/bindings/resource-names.txt
+- clocks: Phandle to the clock.
+ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+- interrupts: One mmc interrupt should be described here.
+- interrupt-names: Should be "mmcirq".
+
+- pinctrl-names: A pinctrl state names "default" must be defined.
+- pinctrl-0: Phandle referencing pin configuration of the sd/emmc controller.
+ See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+
+- reg: This must provide the host controller base address and it can also
+ contain the FlashSS Top register for TX/RX delay used by the driver
+ to configure DLL inside the flashSS, if so reg-names must also be
+ specified.
Optional properties:
-- non-removable: non-removable slot
- See: Documentation/devicetree/bindings/mmc/mmc.txt
-- bus-width: Number of data lines
- See: Documentation/devicetree/bindings/mmc/mmc.txt
+- reg-names: Should be "mmc" and "top-mmc-delay". "top-mmc-delay" is optional
+ for eMMC on stih407 family silicon to configure DLL inside FlashSS.
+
+- non-removable: Non-removable slot. Also used for configuring mmcss in STiH407 SoC
+ family.
+ See: Documentation/devicetree/bindings/mmc/mmc.txt.
+
+- bus-width: Number of data lines.
+ See: Documentation/devicetree/bindings/mmc/mmc.txt.
+
+- max-frequency: Can be 200MHz, 100Mz or 50MHz (default) and used for
+ configuring the CCONFIG3 in the mmcss.
+ See: Documentation/devicetree/bindings/mmc/mmc.txt.
+
+- resets: Phandle and reset specifier pair to softreset line of HC IP.
+ See: Documentation/devicetree/bindings/reset/reset.txt
+
+- vqmmc-supply: Phandle to the regulator dt node, mentioned as the vcc/vdd
+ supply in eMMC/SD specs.
+
+- sd-uhs--sdr50: To enable the SDR50 in the mmcss.
+ See: Documentation/devicetree/bindings/mmc/mmc.txt.
+
+- sd-uhs-sdr104: To enable the SDR104 in the mmcss.
+ See: Documentation/devicetree/bindings/mmc/mmc.txt.
+
+- sd-uhs-ddr50: To enable the DDR50 in the mmcss.
+ See: Documentation/devicetree/bindings/mmc/mmc.txt.
Example:
+/* Example stih416e eMMC configuration */
+
mmc0: sdhci@fe81e000 {
compatible = "st,sdhci";
status = "disabled";
@@ -29,5 +71,43 @@ mmc0: sdhci@fe81e000 {
pinctrl-0 = <&pinctrl_mmc0>;
clock-names = "mmc";
clocks = <&clk_s_a1_ls 1>;
- bus-width = <8>
+ bus-width = <8>
+
+/* Example SD stih407 family configuration */
+
+mmc1: sdhci@09080000 {
+ compatible = "st,sdhci-stih407", "st,sdhci";
+ status = "disabled";
+ reg = <0x09080000 0x7ff>;
+ reg-names = "mmc";
+ interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>;
+ interrupt-names = "mmcirq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd1>;
+ clock-names = "mmc";
+ clocks = <&clk_s_c0_flexgen CLK_MMC_1>;
+ resets = <&softreset STIH407_MMC1_SOFTRESET>;
+ bus-width = <4>;
+};
+
+/* Example eMMC stih407 family configuration */
+
+mmc0: sdhci@09060000 {
+ compatible = "st,sdhci-stih407", "st,sdhci";
+ status = "disabled";
+ reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
+ reg-names = "mmc", "top-mmc-delay";
+ interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>;
+ interrupt-names = "mmcirq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0>;
+ clock-names = "mmc";
+ clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
+ vqmmc-supply = <&vmmc_reg>;
+ max-frequency = <200000000>;
+ bus-width = <8>;
+ non-removable;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ sd-uhs-ddr50;
};