summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorNeilBrown <neilb@suse.com>2015-09-05 12:07:04 +0300
committerNeilBrown <neilb@suse.com>2015-09-05 12:08:32 +0300
commite89c6fdf9e0eb1b5a03574d4ca73e83eae8deb91 (patch)
treef9df292ed03a5a3c4ddc658ae3646f02a1ffafce /Documentation
parentc3cce6cda162eb2b2960a85d9c8992f4f3be85d0 (diff)
parent1081230b748de8f03f37f80c53dfa89feda9b8de (diff)
downloadlinux-e89c6fdf9e0eb1b5a03574d4ca73e83eae8deb91.tar.xz
Merge linux-block/for-4.3/core into md/for-linux
There were a few conflicts that are fairly easy to resolve. Signed-off-by: NeilBrown <neilb@suse.com>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/stable/sysfs-bus-vmbus29
-rw-r--r--Documentation/ABI/testing/configfs-usb-gadget-loopback2
-rw-r--r--Documentation/ABI/testing/configfs-usb-gadget-sourcesink2
-rw-r--r--Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x2
-rw-r--r--Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x2
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio18
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs9
-rw-r--r--Documentation/ABI/testing/sysfs-bus-usb14
-rw-r--r--Documentation/ABI/testing/sysfs-class-power-twl403045
-rw-r--r--Documentation/ABI/testing/sysfs-driver-sunxi-sid22
-rw-r--r--Documentation/ABI/testing/sysfs-driver-wacom19
-rw-r--r--Documentation/CodingStyle2
-rw-r--r--Documentation/DocBook/Makefile55
-rw-r--r--Documentation/DocBook/crypto-API.tmpl8
-rw-r--r--Documentation/DocBook/device-drivers.tmpl1
-rw-r--r--Documentation/DocBook/iio.tmpl697
-rw-r--r--Documentation/DocBook/stylesheet.xsl1
-rw-r--r--Documentation/HOWTO28
-rw-r--r--Documentation/Intel-IOMMU.txt2
-rw-r--r--Documentation/RCU/rcu_dereference.txt2
-rw-r--r--Documentation/RCU/stallwarn.txt29
-rw-r--r--Documentation/RCU/trace.txt36
-rw-r--r--Documentation/RCU/whatisRCU.txt2
-rw-r--r--Documentation/SubmittingPatches14
-rw-r--r--Documentation/acpi/method-tracing.txt204
-rw-r--r--Documentation/adding-syscalls.txt527
-rw-r--r--Documentation/arm/Atmel/README5
-rw-r--r--Documentation/arm/Samsung/Bootloader-interface.txt15
-rw-r--r--Documentation/arm/keystone/Overview.txt73
-rw-r--r--Documentation/block/biodoc.txt2
-rw-r--r--Documentation/block/biovecs.txt10
-rw-r--r--Documentation/block/queue-sysfs.txt10
-rw-r--r--Documentation/cgroups/00-INDEX2
-rw-r--r--Documentation/cgroups/pids.txt85
-rw-r--r--Documentation/cgroups/unified-hierarchy.txt80
-rw-r--r--Documentation/clk.txt8
-rw-r--r--Documentation/cpu-freq/core.txt7
-rw-r--r--Documentation/devicetree/bindings/arc/archs-pct.txt17
-rw-r--r--Documentation/devicetree/bindings/arm/atmel-at91.txt17
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/ns2.txt9
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt14
-rw-r--r--Documentation/devicetree/bindings/arm/coresight.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/cpus.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt18
-rw-r--r--Documentation/devicetree/bindings/arm/marvell,kirkwood.txt2
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek.txt13
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt4
-rw-r--r--Documentation/devicetree/bindings/arm/omap/omap.txt3
-rw-r--r--Documentation/devicetree/bindings/arm/rockchip.txt35
-rw-r--r--Documentation/devicetree/bindings/arm/sp810.txt46
-rw-r--r--Documentation/devicetree/bindings/clock/gpio-mux-clock.txt19
-rw-r--r--Documentation/devicetree/bindings/clock/hi6220-clock.txt19
-rw-r--r--Documentation/devicetree/bindings/clock/imx6ul-clock.txt13
-rw-r--r--Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt83
-rw-r--r--Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt79
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt29
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt30
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt26
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt29
-rw-r--r--Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt61
-rw-r--r--Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt4
-rw-r--r--Documentation/devicetree/bindings/clock/ux500.txt64
-rw-r--r--Documentation/devicetree/bindings/cpufreq/tegra124-cpufreq.txt44
-rw-r--r--Documentation/devicetree/bindings/crypto/fsl-sec4.txt108
-rw-r--r--Documentation/devicetree/bindings/crypto/sun4i-ss.txt23
-rw-r--r--Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt43
-rw-r--r--Documentation/devicetree/bindings/extcon/extcon-palmas.txt5
-rw-r--r--Documentation/devicetree/bindings/hwmon/lm70.txt21
-rw-r--r--Documentation/devicetree/bindings/hwmon/ltc2978.txt12
-rw-r--r--Documentation/devicetree/bindings/iio/adc/mcp320x.txt1
-rw-r--r--Documentation/devicetree/bindings/iio/adc/vf610-adc.txt5
-rw-r--r--Documentation/devicetree/bindings/iio/magnetometer/mmc35240.txt13
-rw-r--r--Documentation/devicetree/bindings/iio/st-sensors.txt2
-rw-r--r--Documentation/devicetree/bindings/input/snvs-pwrkey.txt1
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt25
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt37
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/msi.txt135
-rw-r--r--Documentation/devicetree/bindings/leds/common.txt27
-rw-r--r--Documentation/devicetree/bindings/leds/leds-ns2.txt9
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt125
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/synopsys.txt4
-rw-r--r--Documentation/devicetree/bindings/mfd/rk808.txt8
-rw-r--r--Documentation/devicetree/bindings/mtd/fsl-quadspi.txt3
-rw-r--r--Documentation/devicetree/bindings/mtd/nxp-spifi.txt58
-rw-r--r--Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt3
-rw-r--r--Documentation/devicetree/bindings/net/cpsw.txt6
-rw-r--r--Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt (renamed from Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt)4
-rw-r--r--Documentation/devicetree/bindings/nvmem/nvmem.txt80
-rw-r--r--Documentation/devicetree/bindings/nvmem/qfprom.txt35
-rw-r--r--Documentation/devicetree/bindings/opp/opp.txt (renamed from Documentation/devicetree/bindings/power/opp.txt)40
-rw-r--r--Documentation/devicetree/bindings/pci/ti-pci.txt3
-rw-r--r--Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt26
-rw-r--r--Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt22
-rw-r--r--Documentation/devicetree/bindings/phy/ti-phy.txt16
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt36
-rw-r--r--Documentation/devicetree/bindings/power/power_domain.txt2
-rw-r--r--Documentation/devicetree/bindings/power/qcom,coincell-charger.txt48
-rw-r--r--Documentation/devicetree/bindings/power/rockchip-io-domain.txt14
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt24
-rw-r--r--Documentation/devicetree/bindings/regulator/da9210.txt4
-rw-r--r--Documentation/devicetree/bindings/regulator/da9211.txt32
-rw-r--r--Documentation/devicetree/bindings/regulator/max8973-regulator.txt6
-rw-r--r--Documentation/devicetree/bindings/regulator/mt6311-regulator.txt35
-rw-r--r--Documentation/devicetree/bindings/regulator/pwm-regulator.txt65
-rw-r--r--Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt60
-rw-r--r--Documentation/devicetree/bindings/regulator/regulator.txt1
-rw-r--r--Documentation/devicetree/bindings/reset/ath79-reset.txt20
-rw-r--r--Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt84
-rw-r--r--Documentation/devicetree/bindings/reset/socfpga-reset.txt2
-rw-r--r--Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt2
-rw-r--r--Documentation/devicetree/bindings/reset/st,sti-powerdown.txt4
-rw-r--r--Documentation/devicetree/bindings/reset/st,sti-softreset.txt4
-rw-r--r--Documentation/devicetree/bindings/reset/zynq-reset.txt68
-rw-r--r--Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt2
-rw-r--r--Documentation/devicetree/bindings/rtc/rtc-mxc.txt26
-rw-r--r--Documentation/devicetree/bindings/rtc/rtc-omap.txt1
-rw-r--r--Documentation/devicetree/bindings/serial/atmel-usart.txt3
-rw-r--r--Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt6
-rw-r--r--Documentation/devicetree/bindings/serial/mtk-uart.txt6
-rw-r--r--Documentation/devicetree/bindings/serial/omap_serial.txt3
-rw-r--r--Documentation/devicetree/bindings/soc/mediatek/scpsys.txt41
-rw-r--r--Documentation/devicetree/bindings/soc/qcom,smd-rpm.txt117
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt79
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt8
-rw-r--r--Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt2
-rw-r--r--Documentation/devicetree/bindings/spi/spi-davinci.txt2
-rw-r--r--Documentation/devicetree/bindings/spi/spi-img-spfi.txt1
-rw-r--r--Documentation/devicetree/bindings/spi/spi-mt65xx.txt51
-rw-r--r--Documentation/devicetree/bindings/spi/spi-xlp.txt39
-rw-r--r--Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt2
-rw-r--r--Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt6
-rw-r--r--Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt29
-rw-r--r--Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt20
-rw-r--r--Documentation/devicetree/bindings/usb/generic.txt15
-rw-r--r--Documentation/devicetree/bindings/usb/msm-hsusb.txt4
-rw-r--r--Documentation/devicetree/bindings/usb/qcom,usb-8x16-phy.txt76
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt5
-rw-r--r--Documentation/devicetree/bindings/watchdog/atmel-wdt.txt2
-rw-r--r--Documentation/email-clients.txt2
-rw-r--r--Documentation/fb/sm712fb.txt31
-rw-r--r--Documentation/filesystems/btrfs.txt16
-rw-r--r--Documentation/filesystems/debugfs.txt40
-rw-r--r--Documentation/filesystems/sysfs.txt5
-rw-r--r--Documentation/hwmon/adm127540
-rw-r--r--Documentation/hwmon/fam15h_power10
-rw-r--r--Documentation/hwmon/it8735
-rw-r--r--Documentation/hwmon/ltc2978132
-rw-r--r--Documentation/hwmon/max2075177
-rw-r--r--Documentation/hwmon/nct78023
-rw-r--r--Documentation/hwmon/pmbus8
-rw-r--r--Documentation/input/alps.txt6
-rw-r--r--Documentation/ioctl/ioctl-number.txt3
-rw-r--r--Documentation/kernel-doc-nano-HOWTO.txt2
-rw-r--r--Documentation/kernel-parameters.txt37
-rw-r--r--Documentation/mailbox.txt6
-rw-r--r--Documentation/memory-barriers.txt404
-rw-r--r--Documentation/men-chameleon-bus.txt163
-rw-r--r--Documentation/misc-devices/mei/mei.txt45
-rw-r--r--Documentation/networking/can.txt4
-rw-r--r--Documentation/nvmem/nvmem.txt152
-rw-r--r--Documentation/pcmcia/locking.txt2
-rw-r--r--Documentation/power/devices.txt7
-rw-r--r--Documentation/power/runtime_pm.txt4
-rw-r--r--Documentation/power/suspend-and-cpuhotplug.txt6
-rw-r--r--Documentation/powerpc/cxl.txt2
-rw-r--r--Documentation/powerpc/cxlflash.txt318
-rw-r--r--Documentation/powerpc/dscr.txt6
-rw-r--r--Documentation/powerpc/qe_firmware.txt2
-rw-r--r--Documentation/pps/pps.txt2
-rw-r--r--Documentation/s390/00-INDEX2
-rw-r--r--Documentation/s390/kvm.txt125
-rw-r--r--Documentation/sysctl/vm.txt10
-rw-r--r--Documentation/trace/coresight.txt4
-rw-r--r--Documentation/usb/gadget-testing.txt7
-rw-r--r--Documentation/usb/power-management.txt15
-rw-r--r--Documentation/virtual/kvm/api.txt5
-rw-r--r--Documentation/x86/kernel-stacks2
-rw-r--r--Documentation/x86/mtrr.txt20
-rw-r--r--Documentation/x86/zero-page.txt3
179 files changed, 5693 insertions, 776 deletions
diff --git a/Documentation/ABI/stable/sysfs-bus-vmbus b/Documentation/ABI/stable/sysfs-bus-vmbus
new file mode 100644
index 000000000000..636e938d5e33
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-bus-vmbus
@@ -0,0 +1,29 @@
+What: /sys/bus/vmbus/devices/vmbus_*/id
+Date: Jul 2009
+KernelVersion: 2.6.31
+Contact: K. Y. Srinivasan <kys@microsoft.com>
+Description: The VMBus child_relid of the device's primary channel
+Users: tools/hv/lsvmbus
+
+What: /sys/bus/vmbus/devices/vmbus_*/class_id
+Date: Jul 2009
+KernelVersion: 2.6.31
+Contact: K. Y. Srinivasan <kys@microsoft.com>
+Description: The VMBus interface type GUID of the device
+Users: tools/hv/lsvmbus
+
+What: /sys/bus/vmbus/devices/vmbus_*/device_id
+Date: Jul 2009
+KernelVersion: 2.6.31
+Contact: K. Y. Srinivasan <kys@microsoft.com>
+Description: The VMBus interface instance GUID of the device
+Users: tools/hv/lsvmbus
+
+What: /sys/bus/vmbus/devices/vmbus_*/channel_vp_mapping
+Date: Jul 2015
+KernelVersion: 4.2.0
+Contact: K. Y. Srinivasan <kys@microsoft.com>
+Description: The mapping of which primary/sub channels are bound to which
+ Virtual Processors.
+ Format: <channel's child_relid:the bound cpu's number>
+Users: tools/hv/lsvmbus
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-loopback b/Documentation/ABI/testing/configfs-usb-gadget-loopback
index 9aae5bfb9908..06beefbcf061 100644
--- a/Documentation/ABI/testing/configfs-usb-gadget-loopback
+++ b/Documentation/ABI/testing/configfs-usb-gadget-loopback
@@ -5,4 +5,4 @@ Description:
The attributes:
qlen - depth of loopback queue
- bulk_buflen - buffer length
+ buflen - buffer length
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-sourcesink b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink
index 29477c319f61..bc7ff731aa0c 100644
--- a/Documentation/ABI/testing/configfs-usb-gadget-sourcesink
+++ b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink
@@ -9,4 +9,4 @@ Description:
isoc_maxpacket - 0 - 1023 (fs), 0 - 1024 (hs/ss)
isoc_mult - 0..2 (hs/ss only)
isoc_maxburst - 0..15 (ss only)
- qlen - buffer length
+ buflen - buffer length
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
index b4d0b99afffb..d72ca1736ba4 100644
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
@@ -112,7 +112,7 @@ KernelVersion: 3.19
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
Description: (RW) Mask to apply to all the context ID comparator.
-What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/ctxid_val
+What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/ctxid_pid
Date: November 2014
KernelVersion: 3.19
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
index 2fe2e3dae487..2355ed8ae31f 100644
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
@@ -249,7 +249,7 @@ KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
Description: (RW) Select which context ID comparator to work with.
-What: /sys/bus/coresight/devices/<memory_map>.etm/ctxid_val
+What: /sys/bus/coresight/devices/<memory_map>.etm/ctxid_pid
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 70c9b1ac66db..42d360fe66a5 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -413,6 +413,11 @@ Description:
to compute the calories burnt by the user.
What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale_available
+What: /sys/.../iio:deviceX/in_anglvel_scale_available
+What: /sys/.../iio:deviceX/in_magn_scale_available
+What: /sys/.../iio:deviceX/in_illuminance_scale_available
+What: /sys/.../iio:deviceX/in_intensity_scale_available
+What: /sys/.../iio:deviceX/in_proximity_scale_available
What: /sys/.../iio:deviceX/in_voltageX_scale_available
What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available
What: /sys/.../iio:deviceX/out_voltageX_scale_available
@@ -488,7 +493,7 @@ Contact: linux-iio@vger.kernel.org
Description:
Specifies the output powerdown mode.
DAC output stage is disconnected from the amplifier and
- 1kohm_to_gnd: connected to ground via an 1kOhm resistor,
+ 1kohm_to_gnd: connected to ground via an 1kOhm resistor,
6kohm_to_gnd: connected to ground via a 6kOhm resistor,
20kohm_to_gnd: connected to ground via a 20kOhm resistor,
100kohm_to_gnd: connected to ground via an 100kOhm resistor,
@@ -498,9 +503,9 @@ Description:
outX_powerdown_mode_available. If Y is not present the
mode is shared across all outputs.
-What: /sys/.../iio:deviceX/out_votlageY_powerdown_mode_available
+What: /sys/.../iio:deviceX/out_voltageY_powerdown_mode_available
What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available
-What: /sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available
+What: /sys/.../iio:deviceX/out_altvoltageY_powerdown_mode_available
What: /sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
@@ -1035,13 +1040,6 @@ Contact: linux-iio@vger.kernel.org
Description:
Number of scans contained by the buffer.
-What: /sys/bus/iio/devices/iio:deviceX/buffer/bytes_per_datum
-KernelVersion: 2.6.37
-Contact: linux-iio@vger.kernel.org
-Description:
- Bytes per scan. Due to alignment fun, the scan may be larger
- than implied directly by the scan_element parameters.
-
What: /sys/bus/iio/devices/iio:deviceX/buffer/enable
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs b/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs
index 5235e6c749ab..bbb039237a25 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs
+++ b/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs
@@ -9,3 +9,12 @@ Description:
automated testing or in situations, where other trigger methods
are not applicable. For example no RTC or spare GPIOs.
X is the IIO index of the trigger.
+
+What: /sys/bus/iio/devices/triggerX/name
+KernelVersion: 2.6.39
+Contact: linux-iio@vger.kernel.org
+Description:
+ The name attribute holds a description string for the current
+ trigger. In order to associate the trigger with an IIO device
+ one should write this name string to
+ /sys/bus/iio/devices/iio:deviceY/trigger/current_trigger.
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index e5cc7633d013..864637f25bee 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -114,6 +114,20 @@ Description:
enabled for the device. Developer can write y/Y/1 or n/N/0 to
the file to enable/disable the feature.
+What: /sys/bus/usb/devices/.../power/usb3_hardware_lpm
+Date: June 2015
+Contact: Kevin Strasser <kevin.strasser@linux.intel.com>
+Description:
+ If CONFIG_PM is set and a USB 3.0 lpm-capable device is plugged
+ in to a xHCI host which supports link PM, it will check if U1
+ and U2 exit latencies have been set in the BOS descriptor; if
+ the check is is passed and the host supports USB3 hardware LPM,
+ USB3 hardware LPM will be enabled for the device and the USB
+ device directory will contain a file named
+ power/usb3_hardware_lpm. The file holds a string value (enable
+ or disable) indicating whether or not USB3 hardware LPM is
+ enabled for the device.
+
What: /sys/bus/usb/devices/.../removable
Date: February 2012
Contact: Matthew Garrett <mjg@redhat.com>
diff --git a/Documentation/ABI/testing/sysfs-class-power-twl4030 b/Documentation/ABI/testing/sysfs-class-power-twl4030
new file mode 100644
index 000000000000..be26af0f1895
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-power-twl4030
@@ -0,0 +1,45 @@
+What: /sys/class/power_supply/twl4030_ac/max_current
+ /sys/class/power_supply/twl4030_usb/max_current
+Description:
+ Read/Write limit on current which may
+ be drawn from the ac (Accessory Charger) or
+ USB port.
+
+ Value is in micro-Amps.
+
+ Value is set automatically to an appropriate
+ value when a cable is plugged or unplugged.
+
+ Value can the set by writing to the attribute.
+ The change will only persist until the next
+ plug event. These event are reported via udev.
+
+
+What: /sys/class/power_supply/twl4030_usb/mode
+Description:
+ Changing mode for USB port.
+ Writing to this can disable charging.
+
+ Possible values are:
+ "auto" - draw power as appropriate for detected
+ power source and battery status.
+ "off" - do not draw any power.
+ "continuous"
+ - activate mode described as "linear" in
+ TWL data sheets. This uses whatever
+ current is available and doesn't switch off
+ when voltage drops.
+
+ This is useful for unstable power sources
+ such as bicycle dynamo, but care should
+ be taken that battery is not over-charged.
+
+What: /sys/class/power_supply/twl4030_ac/mode
+Description:
+ Changing mode for 'ac' port.
+ Writing to this can disable charging.
+
+ Possible values are:
+ "auto" - draw power as appropriate for detected
+ power source and battery status.
+ "off" - do not draw any power.
diff --git a/Documentation/ABI/testing/sysfs-driver-sunxi-sid b/Documentation/ABI/testing/sysfs-driver-sunxi-sid
deleted file mode 100644
index ffb9536f6ecc..000000000000
--- a/Documentation/ABI/testing/sysfs-driver-sunxi-sid
+++ /dev/null
@@ -1,22 +0,0 @@
-What: /sys/devices/*/<our-device>/eeprom
-Date: August 2013
-Contact: Oliver Schinagl <oliver@schinagl.nl>
-Description: read-only access to the SID (Security-ID) on current
- A-series SoC's from Allwinner. Currently supports A10, A10s, A13
- and A20 CPU's. The earlier A1x series of SoCs exports 16 bytes,
- whereas the newer A20 SoC exposes 512 bytes split into sections.
- Besides the 16 bytes of SID, there's also an SJTAG area,
- HDMI-HDCP key and some custom keys. Below a quick overview, for
- details see the user manual:
- 0x000 128 bit root-key (sun[457]i)
- 0x010 128 bit boot-key (sun7i)
- 0x020 64 bit security-jtag-key (sun7i)
- 0x028 16 bit key configuration (sun7i)
- 0x02b 16 bit custom-vendor-key (sun7i)
- 0x02c 320 bit low general key (sun7i)
- 0x040 32 bit read-control access (sun7i)
- 0x064 224 bit low general key (sun7i)
- 0x080 2304 bit HDCP-key (sun7i)
- 0x1a0 768 bit high general key (sun7i)
-Users: any user space application which wants to read the SID on
- Allwinner's A-series of CPU's.
diff --git a/Documentation/ABI/testing/sysfs-driver-wacom b/Documentation/ABI/testing/sysfs-driver-wacom
index c4f0fed64a6e..dca429340772 100644
--- a/Documentation/ABI/testing/sysfs-driver-wacom
+++ b/Documentation/ABI/testing/sysfs-driver-wacom
@@ -77,3 +77,22 @@ Description:
The format is also scrambled, like in the USB mode, and it can
be summarized by converting 76543210 into GECA6420.
HGFEDCBA HFDB7531
+
+What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_remote/unpair_remote
+Date: July 2015
+Contact: linux-input@vger.kernel.org
+Description:
+ Writing the character sequence '*' followed by a newline to
+ this file will delete all of the current pairings on the
+ device. Other character sequences are reserved. This file is
+ write only.
+
+What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_remote/<serial_number>/remote_mode
+Date: July 2015
+Contact: linux-input@vger.kernel.org
+Description:
+ Reading from this file reports the mode status of the
+ remote as indicated by the LED lights on the device. If no
+ reports have been received from the paired device, reading
+ from this file will report '-1'. The mode is read-only
+ and cannot be set through the driver.
diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle
index b713c35f8543..c06f817b3091 100644
--- a/Documentation/CodingStyle
+++ b/Documentation/CodingStyle
@@ -929,13 +929,11 @@ The C Programming Language, Second Edition
by Brian W. Kernighan and Dennis M. Ritchie.
Prentice Hall, Inc., 1988.
ISBN 0-13-110362-8 (paperback), 0-13-110370-9 (hardback).
-URL: http://cm.bell-labs.com/cm/cs/cbook/
The Practice of Programming
by Brian W. Kernighan and Rob Pike.
Addison-Wesley, Inc., 1999.
ISBN 0-201-61586-X.
-URL: http://cm.bell-labs.com/cm/cs/tpop/
GNU manuals - where in compliance with K&R and this text - for cpp, gcc,
gcc internals and indent, all available from http://www.gnu.org/manual/
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index b6a6a2e0dd3b..93eff64387cd 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -15,7 +15,7 @@ DOCBOOKS := z8530book.xml device-drivers.xml \
80211.xml debugobjects.xml sh.xml regulator.xml \
alsa-driver-api.xml writing-an-alsa-driver.xml \
tracepoint.xml drm.xml media_api.xml w1.xml \
- writing_musb_glue_layer.xml crypto-API.xml
+ writing_musb_glue_layer.xml crypto-API.xml iio.xml
include Documentation/DocBook/media/Makefile
@@ -56,16 +56,19 @@ htmldocs: $(HTML)
MAN := $(patsubst %.xml, %.9, $(BOOKS))
mandocs: $(MAN)
- find $(obj)/man -name '*.9' | xargs gzip -f
+ find $(obj)/man -name '*.9' | xargs gzip -nf
installmandocs: mandocs
mkdir -p /usr/local/man/man9/
- install $(obj)/man/*.9.gz /usr/local/man/man9/
+ find $(obj)/man -name '*.9.gz' -printf '%h %f\n' | \
+ sort -k 2 -k 1 | uniq -f 1 | sed -e 's: :/:' | \
+ xargs install -m 644 -t /usr/local/man/man9/
###
#External programs used
-KERNELDOC = $(srctree)/scripts/kernel-doc
-DOCPROC = $(objtree)/scripts/docproc
+KERNELDOCXMLREF = $(srctree)/scripts/kernel-doc-xml-ref
+KERNELDOC = $(srctree)/scripts/kernel-doc
+DOCPROC = $(objtree)/scripts/docproc
XMLTOFLAGS = -m $(srctree)/$(src)/stylesheet.xsl
XMLTOFLAGS += --skip-validation
@@ -89,7 +92,7 @@ define rule_docproc
) > $(dir $@).$(notdir $@).cmd
endef
-%.xml: %.tmpl $(KERNELDOC) $(DOCPROC) FORCE
+%.xml: %.tmpl $(KERNELDOC) $(DOCPROC) $(KERNELDOCXMLREF) FORCE
$(call if_changed_rule,docproc)
# Tell kbuild to always build the programs
@@ -140,7 +143,20 @@ quiet_cmd_db2html = HTML $@
echo '<a HREF="$(patsubst %.html,%,$(notdir $@))/index.html"> \
$(patsubst %.html,%,$(notdir $@))</a><p>' > $@
-%.html: %.xml
+###
+# Rules to create an aux XML and .db, and use them to re-process the DocBook XML
+# to fill internal hyperlinks
+ gen_aux_xml = :
+ quiet_gen_aux_xml = echo ' XMLREF $@'
+silent_gen_aux_xml = :
+%.aux.xml: %.xml
+ @$($(quiet)gen_aux_xml)
+ @rm -rf $@
+ @(cat $< | egrep "^<refentry id" | egrep -o "\".*\"" | cut -f 2 -d \" > $<.db)
+ @$(KERNELDOCXMLREF) -db $<.db $< > $@
+.PRECIOUS: %.aux.xml
+
+%.html: %.aux.xml
@(which xmlto > /dev/null 2>&1) || \
(echo "*** You need to install xmlto ***"; \
exit 1)
@@ -150,12 +166,12 @@ quiet_cmd_db2html = HTML $@
cp $(PNG-$(basename $(notdir $@))) $(patsubst %.html,%,$@); fi
quiet_cmd_db2man = MAN $@
- cmd_db2man = if grep -q refentry $<; then xmlto man $(XMLTOFLAGS) -o $(obj)/man $< ; fi
+ cmd_db2man = if grep -q refentry $<; then xmlto man $(XMLTOFLAGS) -o $(obj)/man/$(*F) $< ; fi
%.9 : %.xml
@(which xmlto > /dev/null 2>&1) || \
(echo "*** You need to install xmlto ***"; \
exit 1)
- $(Q)mkdir -p $(obj)/man
+ $(Q)mkdir -p $(obj)/man/$(*F)
$(call cmd,db2man)
@touch $@
@@ -209,15 +225,18 @@ dochelp:
###
# Temporary files left by various tools
clean-files := $(DOCBOOKS) \
- $(patsubst %.xml, %.dvi, $(DOCBOOKS)) \
- $(patsubst %.xml, %.aux, $(DOCBOOKS)) \
- $(patsubst %.xml, %.tex, $(DOCBOOKS)) \
- $(patsubst %.xml, %.log, $(DOCBOOKS)) \
- $(patsubst %.xml, %.out, $(DOCBOOKS)) \
- $(patsubst %.xml, %.ps, $(DOCBOOKS)) \
- $(patsubst %.xml, %.pdf, $(DOCBOOKS)) \
- $(patsubst %.xml, %.html, $(DOCBOOKS)) \
- $(patsubst %.xml, %.9, $(DOCBOOKS)) \
+ $(patsubst %.xml, %.dvi, $(DOCBOOKS)) \
+ $(patsubst %.xml, %.aux, $(DOCBOOKS)) \
+ $(patsubst %.xml, %.tex, $(DOCBOOKS)) \
+ $(patsubst %.xml, %.log, $(DOCBOOKS)) \
+ $(patsubst %.xml, %.out, $(DOCBOOKS)) \
+ $(patsubst %.xml, %.ps, $(DOCBOOKS)) \
+ $(patsubst %.xml, %.pdf, $(DOCBOOKS)) \
+ $(patsubst %.xml, %.html, $(DOCBOOKS)) \
+ $(patsubst %.xml, %.9, $(DOCBOOKS)) \
+ $(patsubst %.xml, %.aux.xml, $(DOCBOOKS)) \
+ $(patsubst %.xml, %.xml.db, $(DOCBOOKS)) \
+ $(patsubst %.xml, %.xml, $(DOCBOOKS)) \
$(index)
clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man
diff --git a/Documentation/DocBook/crypto-API.tmpl b/Documentation/DocBook/crypto-API.tmpl
index 0992531ffefb..07df23ea06e4 100644
--- a/Documentation/DocBook/crypto-API.tmpl
+++ b/Documentation/DocBook/crypto-API.tmpl
@@ -585,7 +585,7 @@ kernel crypto API | IPSEC Layer
+-----------+ |
| | (1)
| aead | <----------------------------------- esp_output
-| (seqniv) | ---+
+| (seqiv) | ---+
+-----------+ |
| (2)
+-----------+ |
@@ -1101,7 +1101,7 @@ kernel crypto API | Caller
</para>
<para>
- [1] http://www.chronox.de/libkcapi.html
+ [1] <ulink url="http://www.chronox.de/libkcapi.html">http://www.chronox.de/libkcapi.html</ulink>
</para>
</sect1>
@@ -1661,7 +1661,7 @@ read(opfd, out, outlen);
</para>
<para>
- [1] http://www.chronox.de/libkcapi.html
+ [1] <ulink url="http://www.chronox.de/libkcapi.html">http://www.chronox.de/libkcapi.html</ulink>
</para>
</sect1>
@@ -1687,7 +1687,7 @@ read(opfd, out, outlen);
!Pinclude/linux/crypto.h Block Cipher Algorithm Definitions
!Finclude/linux/crypto.h crypto_alg
!Finclude/linux/crypto.h ablkcipher_alg
-!Finclude/linux/crypto.h aead_alg
+!Finclude/crypto/aead.h aead_alg
!Finclude/linux/crypto.h blkcipher_alg
!Finclude/linux/crypto.h cipher_alg
!Finclude/crypto/rng.h rng_alg
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index faf09d4a0ea8..bbc1d7ee9c76 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -66,6 +66,7 @@
!Ekernel/time/hrtimer.c
</sect1>
<sect1><title>Workqueues and Kevents</title>
+!Iinclude/linux/workqueue.h
!Ekernel/workqueue.c
</sect1>
<sect1><title>Internal Functions</title>
diff --git a/Documentation/DocBook/iio.tmpl b/Documentation/DocBook/iio.tmpl
new file mode 100644
index 000000000000..06bb53de5a47
--- /dev/null
+++ b/Documentation/DocBook/iio.tmpl
@@ -0,0 +1,697 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+ "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="iioid">
+ <bookinfo>
+ <title>Industrial I/O driver developer's guide </title>
+
+ <authorgroup>
+ <author>
+ <firstname>Daniel</firstname>
+ <surname>Baluta</surname>
+ <affiliation>
+ <address>
+ <email>daniel.baluta@intel.com</email>
+ </address>
+ </affiliation>
+ </author>
+ </authorgroup>
+
+ <copyright>
+ <year>2015</year>
+ <holder>Intel Corporation</holder>
+ </copyright>
+
+ <legalnotice>
+ <para>
+ This documentation is free software; you can redistribute
+ it and/or modify it under the terms of the GNU General Public
+ License version 2.
+ </para>
+ </legalnotice>
+ </bookinfo>
+
+ <toc></toc>
+
+ <chapter id="intro">
+ <title>Introduction</title>
+ <para>
+ The main purpose of the Industrial I/O subsystem (IIO) is to provide
+ support for devices that in some sense perform either analog-to-digital
+ conversion (ADC) or digital-to-analog conversion (DAC) or both. The aim
+ is to fill the gap between the somewhat similar hwmon and input
+ subsystems.
+ Hwmon is directed at low sample rate sensors used to monitor and
+ control the system itself, like fan speed control or temperature
+ measurement. Input is, as its name suggests, focused on human interaction
+ input devices (keyboard, mouse, touchscreen). In some cases there is
+ considerable overlap between these and IIO.
+ </para>
+ <para>
+ Devices that fall into this category include:
+ <itemizedlist>
+ <listitem>
+ analog to digital converters (ADCs)
+ </listitem>
+ <listitem>
+ accelerometers
+ </listitem>
+ <listitem>
+ capacitance to digital converters (CDCs)
+ </listitem>
+ <listitem>
+ digital to analog converters (DACs)
+ </listitem>
+ <listitem>
+ gyroscopes
+ </listitem>
+ <listitem>
+ inertial measurement units (IMUs)
+ </listitem>
+ <listitem>
+ color and light sensors
+ </listitem>
+ <listitem>
+ magnetometers
+ </listitem>
+ <listitem>
+ pressure sensors
+ </listitem>
+ <listitem>
+ proximity sensors
+ </listitem>
+ <listitem>
+ temperature sensors
+ </listitem>
+ </itemizedlist>
+ Usually these sensors are connected via SPI or I2C. A common use case of the
+ sensors devices is to have combined functionality (e.g. light plus proximity
+ sensor).
+ </para>
+ </chapter>
+ <chapter id='iiosubsys'>
+ <title>Industrial I/O core</title>
+ <para>
+ The Industrial I/O core offers:
+ <itemizedlist>
+ <listitem>
+ a unified framework for writing drivers for many different types of
+ embedded sensors.
+ </listitem>
+ <listitem>
+ a standard interface to user space applications manipulating sensors.
+ </listitem>
+ </itemizedlist>
+ The implementation can be found under <filename>
+ drivers/iio/industrialio-*</filename>
+ </para>
+ <sect1 id="iiodevice">
+ <title> Industrial I/O devices </title>
+
+!Finclude/linux/iio/iio.h iio_dev
+!Fdrivers/iio/industrialio-core.c iio_device_alloc
+!Fdrivers/iio/industrialio-core.c iio_device_free
+!Fdrivers/iio/industrialio-core.c iio_device_register
+!Fdrivers/iio/industrialio-core.c iio_device_unregister
+
+ <para>
+ An IIO device usually corresponds to a single hardware sensor and it
+ provides all the information needed by a driver handling a device.
+ Let's first have a look at the functionality embedded in an IIO
+ device then we will show how a device driver makes use of an IIO
+ device.
+ </para>
+ <para>
+ There are two ways for a user space application to interact
+ with an IIO driver.
+ <itemizedlist>
+ <listitem>
+ <filename>/sys/bus/iio/iio:deviceX/</filename>, this
+ represents a hardware sensor and groups together the data
+ channels of the same chip.
+ </listitem>
+ <listitem>
+ <filename>/dev/iio:deviceX</filename>, character device node
+ interface used for buffered data transfer and for events information
+ retrieval.
+ </listitem>
+ </itemizedlist>
+ </para>
+ A typical IIO driver will register itself as an I2C or SPI driver and will
+ create two routines, <function> probe </function> and <function> remove
+ </function>. At <function>probe</function>:
+ <itemizedlist>
+ <listitem>call <function>iio_device_alloc</function>, which allocates memory
+ for an IIO device.
+ </listitem>
+ <listitem> initialize IIO device fields with driver specific information
+ (e.g. device name, device channels).
+ </listitem>
+ <listitem>call <function> iio_device_register</function>, this registers the
+ device with the IIO core. After this call the device is ready to accept
+ requests from user space applications.
+ </listitem>
+ </itemizedlist>
+ At <function>remove</function>, we free the resources allocated in
+ <function>probe</function> in reverse order:
+ <itemizedlist>
+ <listitem><function>iio_device_unregister</function>, unregister the device
+ from the IIO core.
+ </listitem>
+ <listitem><function>iio_device_free</function>, free the memory allocated
+ for the IIO device.
+ </listitem>
+ </itemizedlist>
+
+ <sect2 id="iioattr"> <title> IIO device sysfs interface </title>
+ <para>
+ Attributes are sysfs files used to expose chip info and also allowing
+ applications to set various configuration parameters. For device
+ with index X, attributes can be found under
+ <filename>/sys/bus/iio/iio:deviceX/ </filename> directory.
+ Common attributes are:
+ <itemizedlist>
+ <listitem><filename>name</filename>, description of the physical
+ chip.
+ </listitem>
+ <listitem><filename>dev</filename>, shows the major:minor pair
+ associated with <filename>/dev/iio:deviceX</filename> node.
+ </listitem>
+ <listitem><filename>sampling_frequency_available</filename>,
+ available discrete set of sampling frequency values for
+ device.
+ </listitem>
+ </itemizedlist>
+ Available standard attributes for IIO devices are described in the
+ <filename>Documentation/ABI/testing/sysfs-bus-iio </filename> file
+ in the Linux kernel sources.
+ </para>
+ </sect2>
+ <sect2 id="iiochannel"> <title> IIO device channels </title>
+!Finclude/linux/iio/iio.h iio_chan_spec structure.
+ <para>
+ An IIO device channel is a representation of a data channel. An
+ IIO device can have one or multiple channels. For example:
+ <itemizedlist>
+ <listitem>
+ a thermometer sensor has one channel representing the
+ temperature measurement.
+ </listitem>
+ <listitem>
+ a light sensor with two channels indicating the measurements in
+ the visible and infrared spectrum.
+ </listitem>
+ <listitem>
+ an accelerometer can have up to 3 channels representing
+ acceleration on X, Y and Z axes.
+ </listitem>
+ </itemizedlist>
+ An IIO channel is described by the <type> struct iio_chan_spec
+ </type>. A thermometer driver for the temperature sensor in the
+ example above would have to describe its channel as follows:
+ <programlisting>
+ static const struct iio_chan_spec temp_channel[] = {
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ },
+ };
+
+ </programlisting>
+ Channel sysfs attributes exposed to userspace are specified in
+ the form of <emphasis>bitmasks</emphasis>. Depending on their
+ shared info, attributes can be set in one of the following masks:
+ <itemizedlist>
+ <listitem><emphasis>info_mask_separate</emphasis>, attributes will
+ be specific to this channel</listitem>
+ <listitem><emphasis>info_mask_shared_by_type</emphasis>,
+ attributes are shared by all channels of the same type</listitem>
+ <listitem><emphasis>info_mask_shared_by_dir</emphasis>, attributes
+ are shared by all channels of the same direction </listitem>
+ <listitem><emphasis>info_mask_shared_by_all</emphasis>,
+ attributes are shared by all channels</listitem>
+ </itemizedlist>
+ When there are multiple data channels per channel type we have two
+ ways to distinguish between them:
+ <itemizedlist>
+ <listitem> set <emphasis> .modified</emphasis> field of <type>
+ iio_chan_spec</type> to 1. Modifiers are specified using
+ <emphasis>.channel2</emphasis> field of the same
+ <type>iio_chan_spec</type> structure and are used to indicate a
+ physically unique characteristic of the channel such as its direction
+ or spectral response. For example, a light sensor can have two channels,
+ one for infrared light and one for both infrared and visible light.
+ </listitem>
+ <listitem> set <emphasis>.indexed </emphasis> field of
+ <type>iio_chan_spec</type> to 1. In this case the channel is
+ simply another instance with an index specified by the
+ <emphasis>.channel</emphasis> field.
+ </listitem>
+ </itemizedlist>
+ Here is how we can make use of the channel's modifiers:
+ <programlisting>
+ static const struct iio_chan_spec light_channels[] = {
+ {
+ .type = IIO_INTENSITY,
+ .modified = 1,
+ .channel2 = IIO_MOD_LIGHT_IR,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ },
+ {
+ .type = IIO_INTENSITY,
+ .modified = 1,
+ .channel2 = IIO_MOD_LIGHT_BOTH,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ },
+ {
+ .type = IIO_LIGHT,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ .info_mask_shared = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ },
+
+ }
+ </programlisting>
+ This channel's definition will generate two separate sysfs files
+ for raw data retrieval:
+ <itemizedlist>
+ <listitem>
+ <filename>/sys/bus/iio/iio:deviceX/in_intensity_ir_raw</filename>
+ </listitem>
+ <listitem>
+ <filename>/sys/bus/iio/iio:deviceX/in_intensity_both_raw</filename>
+ </listitem>
+ </itemizedlist>
+ one file for processed data:
+ <itemizedlist>
+ <listitem>
+ <filename>/sys/bus/iio/iio:deviceX/in_illuminance_input
+ </filename>
+ </listitem>
+ </itemizedlist>
+ and one shared sysfs file for sampling frequency:
+ <itemizedlist>
+ <listitem>
+ <filename>/sys/bus/iio/iio:deviceX/sampling_frequency.
+ </filename>
+ </listitem>
+ </itemizedlist>
+ </para>
+ <para>
+ Here is how we can make use of the channel's indexing:
+ <programlisting>
+ static const struct iio_chan_spec light_channels[] = {
+ {
+ .type = IIO_VOLTAGE,
+ .indexed = 1,
+ .channel = 0,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ },
+ {
+ .type = IIO_VOLTAGE,
+ .indexed = 1,
+ .channel = 1,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ },
+ }
+ </programlisting>
+ This will generate two separate attributes files for raw data
+ retrieval:
+ <itemizedlist>
+ <listitem>
+ <filename>/sys/bus/iio/devices/iio:deviceX/in_voltage0_raw</filename>,
+ representing voltage measurement for channel 0.
+ </listitem>
+ <listitem>
+ <filename>/sys/bus/iio/devices/iio:deviceX/in_voltage1_raw</filename>,
+ representing voltage measurement for channel 1.
+ </listitem>
+ </itemizedlist>
+ </para>
+ </sect2>
+ </sect1>
+
+ <sect1 id="iiobuffer"> <title> Industrial I/O buffers </title>
+!Finclude/linux/iio/buffer.h iio_buffer
+!Edrivers/iio/industrialio-buffer.c
+
+ <para>
+ The Industrial I/O core offers a way for continuous data capture
+ based on a trigger source. Multiple data channels can be read at once
+ from <filename>/dev/iio:deviceX</filename> character device node,
+ thus reducing the CPU load.
+ </para>
+
+ <sect2 id="iiobuffersysfs">
+ <title>IIO buffer sysfs interface </title>
+ <para>
+ An IIO buffer has an associated attributes directory under <filename>
+ /sys/bus/iio/iio:deviceX/buffer/</filename>. Here are the existing
+ attributes:
+ <itemizedlist>
+ <listitem>
+ <emphasis>length</emphasis>, the total number of data samples
+ (capacity) that can be stored by the buffer.
+ </listitem>
+ <listitem>
+ <emphasis>enable</emphasis>, activate buffer capture.
+ </listitem>
+ </itemizedlist>
+
+ </para>
+ </sect2>
+ <sect2 id="iiobuffersetup"> <title> IIO buffer setup </title>
+ <para>The meta information associated with a channel reading
+ placed in a buffer is called a <emphasis> scan element </emphasis>.
+ The important bits configuring scan elements are exposed to
+ userspace applications via the <filename>
+ /sys/bus/iio/iio:deviceX/scan_elements/</filename> directory. This
+ file contains attributes of the following form:
+ <itemizedlist>
+ <listitem><emphasis>enable</emphasis>, used for enabling a channel.
+ If and only if its attribute is non zero, then a triggered capture
+ will contain data samples for this channel.
+ </listitem>
+ <listitem><emphasis>type</emphasis>, description of the scan element
+ data storage within the buffer and hence the form in which it is
+ read from user space. Format is <emphasis>
+ [be|le]:[s|u]bits/storagebitsXrepeat[>>shift] </emphasis>.
+ <itemizedlist>
+ <listitem> <emphasis>be</emphasis> or <emphasis>le</emphasis>, specifies
+ big or little endian.
+ </listitem>
+ <listitem>
+ <emphasis>s </emphasis>or <emphasis>u</emphasis>, specifies if
+ signed (2's complement) or unsigned.
+ </listitem>
+ <listitem><emphasis>bits</emphasis>, is the number of valid data
+ bits.
+ </listitem>
+ <listitem><emphasis>storagebits</emphasis>, is the number of bits
+ (after padding) that it occupies in the buffer.
+ </listitem>
+ <listitem>
+ <emphasis>shift</emphasis>, if specified, is the shift that needs
+ to be applied prior to masking out unused bits.
+ </listitem>
+ <listitem>
+ <emphasis>repeat</emphasis>, specifies the number of bits/storagebits
+ repetitions. When the repeat element is 0 or 1, then the repeat
+ value is omitted.
+ </listitem>
+ </itemizedlist>
+ </listitem>
+ </itemizedlist>
+ For example, a driver for a 3-axis accelerometer with 12 bit
+ resolution where data is stored in two 8-bits registers as
+ follows:
+ <programlisting>
+ 7 6 5 4 3 2 1 0
+ +---+---+---+---+---+---+---+---+
+ |D3 |D2 |D1 |D0 | X | X | X | X | (LOW byte, address 0x06)
+ +---+---+---+---+---+---+---+---+
+
+ 7 6 5 4 3 2 1 0
+ +---+---+---+---+---+---+---+---+
+ |D11|D10|D9 |D8 |D7 |D6 |D5 |D4 | (HIGH byte, address 0x07)
+ +---+---+---+---+---+---+---+---+
+ </programlisting>
+
+ will have the following scan element type for each axis:
+ <programlisting>
+ $ cat /sys/bus/iio/devices/iio:device0/scan_elements/in_accel_y_type
+ le:s12/16>>4
+ </programlisting>
+ A user space application will interpret data samples read from the
+ buffer as two byte little endian signed data, that needs a 4 bits
+ right shift before masking out the 12 valid bits of data.
+ </para>
+ <para>
+ For implementing buffer support a driver should initialize the following
+ fields in <type>iio_chan_spec</type> definition:
+ <programlisting>
+ struct iio_chan_spec {
+ /* other members */
+ int scan_index
+ struct {
+ char sign;
+ u8 realbits;
+ u8 storagebits;
+ u8 shift;
+ u8 repeat;
+ enum iio_endian endianness;
+ } scan_type;
+ };
+ </programlisting>
+ The driver implementing the accelerometer described above will
+ have the following channel definition:
+ <programlisting>
+ struct struct iio_chan_spec accel_channels[] = {
+ {
+ .type = IIO_ACCEL,
+ .modified = 1,
+ .channel2 = IIO_MOD_X,
+ /* other stuff here */
+ .scan_index = 0,
+ .scan_type = {
+ .sign = 's',
+ .realbits = 12,
+ .storgebits = 16,
+ .shift = 4,
+ .endianness = IIO_LE,
+ },
+ }
+ /* similar for Y (with channel2 = IIO_MOD_Y, scan_index = 1)
+ * and Z (with channel2 = IIO_MOD_Z, scan_index = 2) axis
+ */
+ }
+ </programlisting>
+ </para>
+ <para>
+ Here <emphasis> scan_index </emphasis> defines the order in which
+ the enabled channels are placed inside the buffer. Channels with a lower
+ scan_index will be placed before channels with a higher index. Each
+ channel needs to have a unique scan_index.
+ </para>
+ <para>
+ Setting scan_index to -1 can be used to indicate that the specific
+ channel does not support buffered capture. In this case no entries will
+ be created for the channel in the scan_elements directory.
+ </para>
+ </sect2>
+ </sect1>
+
+ <sect1 id="iiotrigger"> <title> Industrial I/O triggers </title>
+!Finclude/linux/iio/trigger.h iio_trigger
+!Edrivers/iio/industrialio-trigger.c
+ <para>
+ In many situations it is useful for a driver to be able to
+ capture data based on some external event (trigger) as opposed
+ to periodically polling for data. An IIO trigger can be provided
+ by a device driver that also has an IIO device based on hardware
+ generated events (e.g. data ready or threshold exceeded) or
+ provided by a separate driver from an independent interrupt
+ source (e.g. GPIO line connected to some external system, timer
+ interrupt or user space writing a specific file in sysfs). A
+ trigger may initiate data capture for a number of sensors and
+ also it may be completely unrelated to the sensor itself.
+ </para>
+
+ <sect2 id="iiotrigsysfs"> <title> IIO trigger sysfs interface </title>
+ There are two locations in sysfs related to triggers:
+ <itemizedlist>
+ <listitem><filename>/sys/bus/iio/devices/triggerY</filename>,
+ this file is created once an IIO trigger is registered with
+ the IIO core and corresponds to trigger with index Y. Because
+ triggers can be very different depending on type there are few
+ standard attributes that we can describe here:
+ <itemizedlist>
+ <listitem>
+ <emphasis>name</emphasis>, trigger name that can be later
+ used for association with a device.
+ </listitem>
+ <listitem>
+ <emphasis>sampling_frequency</emphasis>, some timer based
+ triggers use this attribute to specify the frequency for
+ trigger calls.
+ </listitem>
+ </itemizedlist>
+ </listitem>
+ <listitem>
+ <filename>/sys/bus/iio/devices/iio:deviceX/trigger/</filename>, this
+ directory is created once the device supports a triggered
+ buffer. We can associate a trigger with our device by writing
+ the trigger's name in the <filename>current_trigger</filename> file.
+ </listitem>
+ </itemizedlist>
+ </sect2>
+
+ <sect2 id="iiotrigattr"> <title> IIO trigger setup</title>
+
+ <para>
+ Let's see a simple example of how to setup a trigger to be used
+ by a driver.
+
+ <programlisting>
+ struct iio_trigger_ops trigger_ops = {
+ .set_trigger_state = sample_trigger_state,
+ .validate_device = sample_validate_device,
+ }
+
+ struct iio_trigger *trig;
+
+ /* first, allocate memory for our trigger */
+ trig = iio_trigger_alloc(dev, "trig-%s-%d", name, idx);
+
+ /* setup trigger operations field */
+ trig->ops = &amp;trigger_ops;
+
+ /* now register the trigger with the IIO core */
+ iio_trigger_register(trig);
+ </programlisting>
+ </para>
+ </sect2>
+
+ <sect2 id="iiotrigsetup"> <title> IIO trigger ops</title>
+!Finclude/linux/iio/trigger.h iio_trigger_ops
+ <para>
+ Notice that a trigger has a set of operations attached:
+ <itemizedlist>
+ <listitem>
+ <function>set_trigger_state</function>, switch the trigger on/off
+ on demand.
+ </listitem>
+ <listitem>
+ <function>validate_device</function>, function to validate the
+ device when the current trigger gets changed.
+ </listitem>
+ </itemizedlist>
+ </para>
+ </sect2>
+ </sect1>
+ <sect1 id="iiotriggered_buffer">
+ <title> Industrial I/O triggered buffers </title>
+ <para>
+ Now that we know what buffers and triggers are let's see how they
+ work together.
+ </para>
+ <sect2 id="iiotrigbufsetup"> <title> IIO triggered buffer setup</title>
+!Edrivers/iio/industrialio-triggered-buffer.c
+!Finclude/linux/iio/iio.h iio_buffer_setup_ops
+
+
+ <para>
+ A typical triggered buffer setup looks like this:
+ <programlisting>
+ const struct iio_buffer_setup_ops sensor_buffer_setup_ops = {
+ .preenable = sensor_buffer_preenable,
+ .postenable = sensor_buffer_postenable,
+ .postdisable = sensor_buffer_postdisable,
+ .predisable = sensor_buffer_predisable,
+ };
+
+ irqreturn_t sensor_iio_pollfunc(int irq, void *p)
+ {
+ pf->timestamp = iio_get_time_ns();
+ return IRQ_WAKE_THREAD;
+ }
+
+ irqreturn_t sensor_trigger_handler(int irq, void *p)
+ {
+ u16 buf[8];
+ int i = 0;
+
+ /* read data for each active channel */
+ for_each_set_bit(bit, active_scan_mask, masklength)
+ buf[i++] = sensor_get_data(bit)
+
+ iio_push_to_buffers_with_timestamp(indio_dev, buf, timestamp);
+
+ iio_trigger_notify_done(trigger);
+ return IRQ_HANDLED;
+ }
+
+ /* setup triggered buffer, usually in probe function */
+ iio_triggered_buffer_setup(indio_dev, sensor_iio_polfunc,
+ sensor_trigger_handler,
+ sensor_buffer_setup_ops);
+ </programlisting>
+ </para>
+ The important things to notice here are:
+ <itemizedlist>
+ <listitem><function> iio_buffer_setup_ops</function>, the buffer setup
+ functions to be called at predefined points in the buffer configuration
+ sequence (e.g. before enable, after disable). If not specified, the
+ IIO core uses the default <type>iio_triggered_buffer_setup_ops</type>.
+ </listitem>
+ <listitem><function>sensor_iio_pollfunc</function>, the function that
+ will be used as top half of poll function. It should do as little
+ processing as possible, because it runs in interrupt context. The most
+ common operation is recording of the current timestamp and for this reason
+ one can use the IIO core defined <function>iio_pollfunc_store_time
+ </function> function.
+ </listitem>
+ <listitem><function>sensor_trigger_handler</function>, the function that
+ will be used as bottom half of the poll function. This runs in the
+ context of a kernel thread and all the processing takes place here.
+ It usually reads data from the device and stores it in the internal
+ buffer together with the timestamp recorded in the top half.
+ </listitem>
+ </itemizedlist>
+ </sect2>
+ </sect1>
+ </chapter>
+ <chapter id='iioresources'>
+ <title> Resources </title>
+ IIO core may change during time so the best documentation to read is the
+ source code. There are several locations where you should look:
+ <itemizedlist>
+ <listitem>
+ <filename>drivers/iio/</filename>, contains the IIO core plus
+ and directories for each sensor type (e.g. accel, magnetometer,
+ etc.)
+ </listitem>
+ <listitem>
+ <filename>include/linux/iio/</filename>, contains the header
+ files, nice to read for the internal kernel interfaces.
+ </listitem>
+ <listitem>
+ <filename>include/uapi/linux/iio/</filename>, contains files to be
+ used by user space applications.
+ </listitem>
+ <listitem>
+ <filename>tools/iio/</filename>, contains tools for rapidly
+ testing buffers, events and device creation.
+ </listitem>
+ <listitem>
+ <filename>drivers/staging/iio/</filename>, contains code for some
+ drivers or experimental features that are not yet mature enough
+ to be moved out.
+ </listitem>
+ </itemizedlist>
+ <para>
+ Besides the code, there are some good online documentation sources:
+ <itemizedlist>
+ <listitem>
+ <ulink url="http://marc.info/?l=linux-iio"> Industrial I/O mailing
+ list </ulink>
+ </listitem>
+ <listitem>
+ <ulink url="http://wiki.analog.com/software/linux/docs/iio/iio">
+ Analog Device IIO wiki page </ulink>
+ </listitem>
+ <listitem>
+ <ulink url="https://fosdem.org/2015/schedule/event/iiosdr/">
+ Using the Linux IIO framework for SDR, Lars-Peter Clausen's
+ presentation at FOSDEM </ulink>
+ </listitem>
+ </itemizedlist>
+ </para>
+ </chapter>
+</book>
+
+<!--
+vim: softtabstop=2:shiftwidth=2:expandtab:textwidth=72
+-->
diff --git a/Documentation/DocBook/stylesheet.xsl b/Documentation/DocBook/stylesheet.xsl
index 85b25275196f..3bf4ecf3d760 100644
--- a/Documentation/DocBook/stylesheet.xsl
+++ b/Documentation/DocBook/stylesheet.xsl
@@ -5,6 +5,7 @@
<param name="funcsynopsis.tabular.threshold">80</param>
<param name="callout.graphics">0</param>
<!-- <param name="paper.type">A4</param> -->
+<param name="generate.consistent.ids">1</param>
<param name="generate.section.toc.level">2</param>
<param name="use.id.as.filename">1</param>
</stylesheet>
diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index 93aa8604630e..21152d397b88 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -218,16 +218,16 @@ The development process
Linux kernel development process currently consists of a few different
main kernel "branches" and lots of different subsystem-specific kernel
branches. These different branches are:
- - main 3.x kernel tree
- - 3.x.y -stable kernel tree
- - 3.x -git kernel patches
+ - main 4.x kernel tree
+ - 4.x.y -stable kernel tree
+ - 4.x -git kernel patches
- subsystem specific kernel trees and patches
- - the 3.x -next kernel tree for integration tests
+ - the 4.x -next kernel tree for integration tests
-3.x kernel tree
+4.x kernel tree
-----------------
-3.x kernels are maintained by Linus Torvalds, and can be found on
-kernel.org in the pub/linux/kernel/v3.x/ directory. Its development
+4.x kernels are maintained by Linus Torvalds, and can be found on
+kernel.org in the pub/linux/kernel/v4.x/ directory. Its development
process is as follows:
- As soon as a new kernel is released a two weeks window is open,
during this period of time maintainers can submit big diffs to
@@ -262,20 +262,20 @@ mailing list about kernel releases:
released according to perceived bug status, not according to a
preconceived timeline."
-3.x.y -stable kernel tree
+4.x.y -stable kernel tree
---------------------------
Kernels with 3-part versions are -stable kernels. They contain
relatively small and critical fixes for security problems or significant
-regressions discovered in a given 3.x kernel.
+regressions discovered in a given 4.x kernel.
This is the recommended branch for users who want the most recent stable
kernel and are not interested in helping test development/experimental
versions.
-If no 3.x.y kernel is available, then the highest numbered 3.x
+If no 4.x.y kernel is available, then the highest numbered 4.x
kernel is the current stable kernel.
-3.x.y are maintained by the "stable" team <stable@vger.kernel.org>, and
+4.x.y are maintained by the "stable" team <stable@vger.kernel.org>, and
are released as needs dictate. The normal release period is approximately
two weeks, but it can be longer if there are no pressing problems. A
security-related problem, instead, can cause a release to happen almost
@@ -285,7 +285,7 @@ The file Documentation/stable_kernel_rules.txt in the kernel tree
documents what kinds of changes are acceptable for the -stable tree, and
how the release process works.
-3.x -git patches
+4.x -git patches
------------------
These are daily snapshots of Linus' kernel tree which are managed in a
git repository (hence the name.) These patches are usually released
@@ -317,9 +317,9 @@ revisions to it, and maintainers can mark patches as under review,
accepted, or rejected. Most of these patchwork sites are listed at
http://patchwork.kernel.org/.
-3.x -next kernel tree for integration tests
+4.x -next kernel tree for integration tests
---------------------------------------------
-Before updates from subsystem trees are merged into the mainline 3.x
+Before updates from subsystem trees are merged into the mainline 4.x
tree, they need to be integration-tested. For this purpose, a special
testing repository exists into which virtually all subsystem trees are
pulled on an almost daily basis:
diff --git a/Documentation/Intel-IOMMU.txt b/Documentation/Intel-IOMMU.txt
index cf9431db8731..7b57fc087088 100644
--- a/Documentation/Intel-IOMMU.txt
+++ b/Documentation/Intel-IOMMU.txt
@@ -10,7 +10,7 @@ This guide gives a quick cheat sheet for some basic understanding.
Some Keywords
DMAR - DMA remapping
-DRHD - DMA Engine Reporting Structure
+DRHD - DMA Remapping Hardware Unit Definition
RMRR - Reserved memory Region Reporting Structure
ZLR - Zero length reads from PCI devices
IOVA - IO Virtual address.
diff --git a/Documentation/RCU/rcu_dereference.txt b/Documentation/RCU/rcu_dereference.txt
index 1e6c0da994f5..c0bf2441a2ba 100644
--- a/Documentation/RCU/rcu_dereference.txt
+++ b/Documentation/RCU/rcu_dereference.txt
@@ -28,7 +28,7 @@ o You must use one of the rcu_dereference() family of primitives
o Avoid cancellation when using the "+" and "-" infix arithmetic
operators. For example, for a given variable "x", avoid
"(x-x)". There are similar arithmetic pitfalls from other
- arithmetic operatiors, such as "(x*0)", "(x/(x+1))" or "(x%1)".
+ arithmetic operators, such as "(x*0)", "(x/(x+1))" or "(x%1)".
The compiler is within its rights to substitute zero for all of
these expressions, so that subsequent accesses no longer depend
on the rcu_dereference(), again possibly resulting in bugs due
diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt
index b57c0c1cdac6..efb9454875ab 100644
--- a/Documentation/RCU/stallwarn.txt
+++ b/Documentation/RCU/stallwarn.txt
@@ -26,12 +26,6 @@ CONFIG_RCU_CPU_STALL_TIMEOUT
Stall-warning messages may be enabled and disabled completely via
/sys/module/rcupdate/parameters/rcu_cpu_stall_suppress.
-CONFIG_RCU_CPU_STALL_INFO
-
- This kernel configuration parameter causes the stall warning to
- print out additional per-CPU diagnostic information, including
- information on scheduling-clock ticks and RCU's idle-CPU tracking.
-
RCU_STALL_DELAY_DELTA
Although the lockdep facility is extremely useful, it does add
@@ -101,15 +95,13 @@ interact. Please note that it is not possible to entirely eliminate this
sort of false positive without resorting to things like stop_machine(),
which is overkill for this sort of problem.
-If the CONFIG_RCU_CPU_STALL_INFO kernel configuration parameter is set,
-more information is printed with the stall-warning message, for example:
+Recent kernels will print a long form of the stall-warning message:
INFO: rcu_preempt detected stall on CPU
0: (63959 ticks this GP) idle=241/3fffffffffffffff/0 softirq=82/543
(t=65000 jiffies)
-In kernels with CONFIG_RCU_FAST_NO_HZ, even more information is
-printed:
+In kernels with CONFIG_RCU_FAST_NO_HZ, more information is printed:
INFO: rcu_preempt detected stall on CPU
0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 softirq=82/543 last_accelerate: a345/d342 nonlazy_posted: 25 .D
@@ -171,6 +163,23 @@ message will be about three times the interval between the beginning
of the stall and the first message.
+Stall Warnings for Expedited Grace Periods
+
+If an expedited grace period detects a stall, it will place a message
+like the following in dmesg:
+
+ INFO: rcu_sched detected expedited stalls on CPUs: { 1 2 6 } 26009 jiffies s: 1043
+
+This indicates that CPUs 1, 2, and 6 have failed to respond to a
+reschedule IPI, that the expedited grace period has been going on for
+26,009 jiffies, and that the expedited grace-period sequence counter is
+1043. The fact that this last value is odd indicates that an expedited
+grace period is in flight.
+
+It is entirely possible to see stall warnings from normal and from
+expedited grace periods at about the same time from the same run.
+
+
What Causes RCU CPU Stall Warnings?
So your kernel printed an RCU CPU stall warning. The next question is
diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt
index 08651da15448..97f17e9decda 100644
--- a/Documentation/RCU/trace.txt
+++ b/Documentation/RCU/trace.txt
@@ -237,42 +237,26 @@ o "ktl" is the low-order 16 bits (in hexadecimal) of the count of
The output of "cat rcu/rcu_preempt/rcuexp" looks as follows:
-s=21872 d=21872 w=0 tf=0 wd1=0 wd2=0 n=0 sc=21872 dt=21872 dl=0 dx=21872
+s=21872 wd0=0 wd1=0 wd2=0 wd3=5 n=0 enq=0 sc=21872
These fields are as follows:
-o "s" is the starting sequence number.
+o "s" is the sequence number, with an odd number indicating that
+ an expedited grace period is in progress.
-o "d" is the ending sequence number. When the starting and ending
- numbers differ, there is an expedited grace period in progress.
-
-o "w" is the number of times that the sequence numbers have been
- in danger of wrapping.
-
-o "tf" is the number of times that contention has resulted in a
- failure to begin an expedited grace period.
-
-o "wd1" and "wd2" are the number of times that an attempt to
- start an expedited grace period found that someone else had
- completed an expedited grace period that satisfies the
+o "wd0", "wd1", "wd2", and "wd3" are the number of times that an
+ attempt to start an expedited grace period found that someone
+ else had completed an expedited grace period that satisfies the
attempted request. "Our work is done."
-o "n" is number of times that contention was so great that
- the request was demoted from an expedited grace period to
- a normal grace period.
+o "n" is number of times that a concurrent CPU-hotplug operation
+ forced a fallback to a normal grace period.
+
+o "enq" is the number of quiescent states still outstanding.
o "sc" is the number of times that the attempt to start a
new expedited grace period succeeded.
-o "dt" is the number of times that we attempted to update
- the "d" counter.
-
-o "dl" is the number of times that we failed to update the "d"
- counter.
-
-o "dx" is the number of times that we succeeded in updating
- the "d" counter.
-
The output of "cat rcu/rcu_preempt/rcugp" looks as follows:
diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt
index 5746b0c77f3e..adc2184009c5 100644
--- a/Documentation/RCU/whatisRCU.txt
+++ b/Documentation/RCU/whatisRCU.txt
@@ -883,7 +883,7 @@ All: lockdep-checked RCU-protected pointer access
rcu_access_pointer
rcu_dereference_raw
- rcu_lockdep_assert
+ RCU_LOCKDEP_WARN
rcu_sleep_check
RCU_NONIDLE
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 27e7e5edeca8..fd89b04d34f0 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -90,11 +90,11 @@ patch.
Make sure your patch does not include any extra files which do not
belong in a patch submission. Make sure to review your patch -after-
-generated it with diff(1), to ensure accuracy.
+generating it with diff(1), to ensure accuracy.
If your changes produce a lot of deltas, you need to split them into
individual patches which modify things in logical stages; see section
-#3. This will facilitate easier reviewing by other kernel developers,
+#3. This will facilitate review by other kernel developers,
very important if you want your patch accepted.
If you're using git, "git rebase -i" can help you with this process. If
@@ -267,7 +267,7 @@ You should always copy the appropriate subsystem maintainer(s) on any patch
to code that they maintain; look through the MAINTAINERS file and the
source code revision history to see who those maintainers are. The
script scripts/get_maintainer.pl can be very useful at this step. If you
-cannot find a maintainer for the subsystem your are working on, Andrew
+cannot find a maintainer for the subsystem you are working on, Andrew
Morton (akpm@linux-foundation.org) serves as a maintainer of last resort.
You should also normally choose at least one mailing list to receive a copy
@@ -291,7 +291,7 @@ sending him e-mail.
If you have a patch that fixes an exploitable security bug, send that patch
to security@kernel.org. For severe bugs, a short embargo may be considered
-to allow distrbutors to get the patch out to users; in such cases,
+to allow distributors to get the patch out to users; in such cases,
obviously, the patch should not be sent to any public lists.
Patches that fix a severe bug in a released kernel should be directed
@@ -340,7 +340,7 @@ on the changes you are submitting. It is important for a kernel
developer to be able to "quote" your changes, using standard e-mail
tools, so that they may comment on specific portions of your code.
-For this reason, all patches should be submitting e-mail "inline".
+For this reason, all patches should be submitted by e-mail "inline".
WARNING: Be wary of your editor's word-wrap corrupting your patch,
if you choose to cut-n-paste your patch.
@@ -739,7 +739,7 @@ interest on a single line; it should look something like:
git://jdelvare.pck.nerim.net/jdelvare-2.6 i2c-for-linus
- to get these changes:"
+ to get these changes:
A pull request should also include an overall message saying what will be
included in the request, a "git shortlog" listing of the patches
@@ -796,7 +796,7 @@ NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people!
<https://lkml.org/lkml/2005/7/11/336>
Kernel Documentation/CodingStyle:
- <http://users.sosdg.org/~qiyong/lxr/source/Documentation/CodingStyle>
+ <Documentation/CodingStyle>
Linus Torvalds's mail on the canonical patch format:
<http://lkml.org/lkml/2005/4/7/183>
diff --git a/Documentation/acpi/method-tracing.txt b/Documentation/acpi/method-tracing.txt
index f6efb1ea559a..c2505eefc878 100644
--- a/Documentation/acpi/method-tracing.txt
+++ b/Documentation/acpi/method-tracing.txt
@@ -1,26 +1,192 @@
-/sys/module/acpi/parameters/:
+ACPICA Trace Facility
-trace_method_name
- The AML method name that the user wants to trace
+Copyright (C) 2015, Intel Corporation
+Author: Lv Zheng <lv.zheng@intel.com>
-trace_debug_layer
- The temporary debug_layer used when tracing the method.
- Using 0xffffffff by default if it is 0.
-trace_debug_level
- The temporary debug_level used when tracing the method.
- Using 0x00ffffff by default if it is 0.
+Abstract:
-trace_state
- The status of the tracing feature.
+This document describes the functions and the interfaces of the method
+tracing facility.
+
+1. Functionalities and usage examples:
+
+ ACPICA provides method tracing capability. And two functions are
+ currently implemented using this capability.
+
+ A. Log reducer
+ ACPICA subsystem provides debugging outputs when CONFIG_ACPI_DEBUG is
+ enabled. The debugging messages which are deployed via
+ ACPI_DEBUG_PRINT() macro can be reduced at 2 levels - per-component
+ level (known as debug layer, configured via
+ /sys/module/acpi/parameters/debug_layer) and per-type level (known as
+ debug level, configured via /sys/module/acpi/parameters/debug_level).
+
+ But when the particular layer/level is applied to the control method
+ evaluations, the quantity of the debugging outputs may still be too
+ large to be put into the kernel log buffer. The idea thus is worked out
+ to only enable the particular debug layer/level (normally more detailed)
+ logs when the control method evaluation is started, and disable the
+ detailed logging when the control method evaluation is stopped.
+
+ The following command examples illustrate the usage of the "log reducer"
+ functionality:
+ a. Filter out the debug layer/level matched logs when control methods
+ are being evaluated:
+ # cd /sys/module/acpi/parameters
+ # echo "0xXXXXXXXX" > trace_debug_layer
+ # echo "0xYYYYYYYY" > trace_debug_level
+ # echo "enable" > trace_state
+ b. Filter out the debug layer/level matched logs when the specified
+ control method is being evaluated:
+ # cd /sys/module/acpi/parameters
+ # echo "0xXXXXXXXX" > trace_debug_layer
+ # echo "0xYYYYYYYY" > trace_debug_level
+ # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name
+ # echo "method" > /sys/module/acpi/parameters/trace_state
+ c. Filter out the debug layer/level matched logs when the specified
+ control method is being evaluated for the first time:
+ # cd /sys/module/acpi/parameters
+ # echo "0xXXXXXXXX" > trace_debug_layer
+ # echo "0xYYYYYYYY" > trace_debug_level
+ # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name
+ # echo "method-once" > /sys/module/acpi/parameters/trace_state
+ Where:
+ 0xXXXXXXXX/0xYYYYYYYY: Refer to Documentation/acpi/debug.txt for
+ possible debug layer/level masking values.
+ \PPPP.AAAA.TTTT.HHHH: Full path of a control method that can be found
+ in the ACPI namespace. It needn't be an entry
+ of a control method evaluation.
+
+ B. AML tracer
+
+ There are special log entries added by the method tracing facility at
+ the "trace points" the AML interpreter starts/stops to execute a control
+ method, or an AML opcode. Note that the format of the log entries are
+ subject to change:
+ [ 0.186427] exdebug-0398 ex_trace_point : Method Begin [0xf58394d8:\_SB.PCI0.LPCB.ECOK] execution.
+ [ 0.186630] exdebug-0398 ex_trace_point : Opcode Begin [0xf5905c88:If] execution.
+ [ 0.186820] exdebug-0398 ex_trace_point : Opcode Begin [0xf5905cc0:LEqual] execution.
+ [ 0.187010] exdebug-0398 ex_trace_point : Opcode Begin [0xf5905a20:-NamePath-] execution.
+ [ 0.187214] exdebug-0398 ex_trace_point : Opcode End [0xf5905a20:-NamePath-] execution.
+ [ 0.187407] exdebug-0398 ex_trace_point : Opcode Begin [0xf5905f60:One] execution.
+ [ 0.187594] exdebug-0398 ex_trace_point : Opcode End [0xf5905f60:One] execution.
+ [ 0.187789] exdebug-0398 ex_trace_point : Opcode End [0xf5905cc0:LEqual] execution.
+ [ 0.187980] exdebug-0398 ex_trace_point : Opcode Begin [0xf5905cc0:Return] execution.
+ [ 0.188146] exdebug-0398 ex_trace_point : Opcode Begin [0xf5905f60:One] execution.
+ [ 0.188334] exdebug-0398 ex_trace_point : Opcode End [0xf5905f60:One] execution.
+ [ 0.188524] exdebug-0398 ex_trace_point : Opcode End [0xf5905cc0:Return] execution.
+ [ 0.188712] exdebug-0398 ex_trace_point : Opcode End [0xf5905c88:If] execution.
+ [ 0.188903] exdebug-0398 ex_trace_point : Method End [0xf58394d8:\_SB.PCI0.LPCB.ECOK] execution.
- "enabled" means this feature is enabled
- and the AML method is traced every time it's executed.
+ Developers can utilize these special log entries to track the AML
+ interpretion, thus can aid issue debugging and performance tuning. Note
+ that, as the "AML tracer" logs are implemented via ACPI_DEBUG_PRINT()
+ macro, CONFIG_ACPI_DEBUG is also required to be enabled for enabling
+ "AML tracer" logs.
- "1" means this feature is enabled and the AML method
- will only be traced during the next execution.
+ The following command examples illustrate the usage of the "AML tracer"
+ functionality:
+ a. Filter out the method start/stop "AML tracer" logs when control
+ methods are being evaluated:
+ # cd /sys/module/acpi/parameters
+ # echo "0x80" > trace_debug_layer
+ # echo "0x10" > trace_debug_level
+ # echo "enable" > trace_state
+ b. Filter out the method start/stop "AML tracer" when the specified
+ control method is being evaluated:
+ # cd /sys/module/acpi/parameters
+ # echo "0x80" > trace_debug_layer
+ # echo "0x10" > trace_debug_level
+ # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name
+ # echo "method" > trace_state
+ c. Filter out the method start/stop "AML tracer" logs when the specified
+ control method is being evaluated for the first time:
+ # cd /sys/module/acpi/parameters
+ # echo "0x80" > trace_debug_layer
+ # echo "0x10" > trace_debug_level
+ # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name
+ # echo "method-once" > trace_state
+ d. Filter out the method/opcode start/stop "AML tracer" when the
+ specified control method is being evaluated:
+ # cd /sys/module/acpi/parameters
+ # echo "0x80" > trace_debug_layer
+ # echo "0x10" > trace_debug_level
+ # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name
+ # echo "opcode" > trace_state
+ e. Filter out the method/opcode start/stop "AML tracer" when the
+ specified control method is being evaluated for the first time:
+ # cd /sys/module/acpi/parameters
+ # echo "0x80" > trace_debug_layer
+ # echo "0x10" > trace_debug_level
+ # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name
+ # echo "opcode-opcode" > trace_state
- "disabled" means this feature is disabled.
- Users can enable/disable this debug tracing feature by
- "echo string > /sys/module/acpi/parameters/trace_state".
- "string" should be one of "enable", "disable" and "1".
+ Note that all above method tracing facility related module parameters can
+ be used as the boot parameters, for example:
+ acpi.trace_debug_layer=0x80 acpi.trace_debug_level=0x10 \
+ acpi.trace_method_name=\_SB.LID0._LID acpi.trace_state=opcode-once
+
+2. Interface descriptions:
+
+ All method tracing functions can be configured via ACPI module
+ parameters that are accessible at /sys/module/acpi/parameters/:
+
+ trace_method_name
+ The full path of the AML method that the user wants to trace.
+ Note that the full path shouldn't contain the trailing "_"s in its
+ name segments but may contain "\" to form an absolute path.
+
+ trace_debug_layer
+ The temporary debug_layer used when the tracing feature is enabled.
+ Using ACPI_EXECUTER (0x80) by default, which is the debug_layer
+ used to match all "AML tracer" logs.
+
+ trace_debug_level
+ The temporary debug_level used when the tracing feature is enabled.
+ Using ACPI_LV_TRACE_POINT (0x10) by default, which is the
+ debug_level used to match all "AML tracer" logs.
+
+ trace_state
+ The status of the tracing feature.
+ Users can enable/disable this debug tracing feature by executing
+ the following command:
+ # echo string > /sys/module/acpi/parameters/trace_state
+ Where "string" should be one of the followings:
+ "disable"
+ Disable the method tracing feature.
+ "enable"
+ Enable the method tracing feature.
+ ACPICA debugging messages matching
+ "trace_debug_layer/trace_debug_level" during any method
+ execution will be logged.
+ "method"
+ Enable the method tracing feature.
+ ACPICA debugging messages matching
+ "trace_debug_layer/trace_debug_level" during method execution
+ of "trace_method_name" will be logged.
+ "method-once"
+ Enable the method tracing feature.
+ ACPICA debugging messages matching
+ "trace_debug_layer/trace_debug_level" during method execution
+ of "trace_method_name" will be logged only once.
+ "opcode"
+ Enable the method tracing feature.
+ ACPICA debugging messages matching
+ "trace_debug_layer/trace_debug_level" during method/opcode
+ execution of "trace_method_name" will be logged.
+ "opcode-once"
+ Enable the method tracing feature.
+ ACPICA debugging messages matching
+ "trace_debug_layer/trace_debug_level" during method/opcode
+ execution of "trace_method_name" will be logged only once.
+ Note that, the difference between the "enable" and other feature
+ enabling options are:
+ 1. When "enable" is specified, since
+ "trace_debug_layer/trace_debug_level" shall apply to all control
+ method evaluations, after configuring "trace_state" to "enable",
+ "trace_method_name" will be reset to NULL.
+ 2. When "method/opcode" is specified, if
+ "trace_method_name" is NULL when "trace_state" is configured to
+ these options, the "trace_debug_layer/trace_debug_level" will
+ apply to all control method evaluations.
diff --git a/Documentation/adding-syscalls.txt b/Documentation/adding-syscalls.txt
new file mode 100644
index 000000000000..cc2d4ac4f404
--- /dev/null
+++ b/Documentation/adding-syscalls.txt
@@ -0,0 +1,527 @@
+Adding a New System Call
+========================
+
+This document describes what's involved in adding a new system call to the
+Linux kernel, over and above the normal submission advice in
+Documentation/SubmittingPatches.
+
+
+System Call Alternatives
+------------------------
+
+The first thing to consider when adding a new system call is whether one of
+the alternatives might be suitable instead. Although system calls are the
+most traditional and most obvious interaction points between userspace and the
+kernel, there are other possibilities -- choose what fits best for your
+interface.
+
+ - If the operations involved can be made to look like a filesystem-like
+ object, it may make more sense to create a new filesystem or device. This
+ also makes it easier to encapsulate the new functionality in a kernel module
+ rather than requiring it to be built into the main kernel.
+ - If the new functionality involves operations where the kernel notifies
+ userspace that something has happened, then returning a new file
+ descriptor for the relevant object allows userspace to use
+ poll/select/epoll to receive that notification.
+ - However, operations that don't map to read(2)/write(2)-like operations
+ have to be implemented as ioctl(2) requests, which can lead to a
+ somewhat opaque API.
+ - If you're just exposing runtime system information, a new node in sysfs
+ (see Documentation/filesystems/sysfs.txt) or the /proc filesystem may be
+ more appropriate. However, access to these mechanisms requires that the
+ relevant filesystem is mounted, which might not always be the case (e.g.
+ in a namespaced/sandboxed/chrooted environment). Avoid adding any API to
+ debugfs, as this is not considered a 'production' interface to userspace.
+ - If the operation is specific to a particular file or file descriptor, then
+ an additional fcntl(2) command option may be more appropriate. However,
+ fcntl(2) is a multiplexing system call that hides a lot of complexity, so
+ this option is best for when the new function is closely analogous to
+ existing fcntl(2) functionality, or the new functionality is very simple
+ (for example, getting/setting a simple flag related to a file descriptor).
+ - If the operation is specific to a particular task or process, then an
+ additional prctl(2) command option may be more appropriate. As with
+ fcntl(2), this system call is a complicated multiplexor so is best reserved
+ for near-analogs of existing prctl() commands or getting/setting a simple
+ flag related to a process.
+
+
+Designing the API: Planning for Extension
+-----------------------------------------
+
+A new system call forms part of the API of the kernel, and has to be supported
+indefinitely. As such, it's a very good idea to explicitly discuss the
+interface on the kernel mailing list, and it's important to plan for future
+extensions of the interface.
+
+(The syscall table is littered with historical examples where this wasn't done,
+together with the corresponding follow-up system calls -- eventfd/eventfd2,
+dup2/dup3, inotify_init/inotify_init1, pipe/pipe2, renameat/renameat2 -- so
+learn from the history of the kernel and plan for extensions from the start.)
+
+For simpler system calls that only take a couple of arguments, the preferred
+way to allow for future extensibility is to include a flags argument to the
+system call. To make sure that userspace programs can safely use flags
+between kernel versions, check whether the flags value holds any unknown
+flags, and reject the system call (with EINVAL) if it does:
+
+ if (flags & ~(THING_FLAG1 | THING_FLAG2 | THING_FLAG3))
+ return -EINVAL;
+
+(If no flags values are used yet, check that the flags argument is zero.)
+
+For more sophisticated system calls that involve a larger number of arguments,
+it's preferred to encapsulate the majority of the arguments into a structure
+that is passed in by pointer. Such a structure can cope with future extension
+by including a size argument in the structure:
+
+ struct xyzzy_params {
+ u32 size; /* userspace sets p->size = sizeof(struct xyzzy_params) */
+ u32 param_1;
+ u64 param_2;
+ u64 param_3;
+ };
+
+As long as any subsequently added field, say param_4, is designed so that a
+zero value gives the previous behaviour, then this allows both directions of
+version mismatch:
+
+ - To cope with a later userspace program calling an older kernel, the kernel
+ code should check that any memory beyond the size of the structure that it
+ expects is zero (effectively checking that param_4 == 0).
+ - To cope with an older userspace program calling a newer kernel, the kernel
+ code can zero-extend a smaller instance of the structure (effectively
+ setting param_4 = 0).
+
+See perf_event_open(2) and the perf_copy_attr() function (in
+kernel/events/core.c) for an example of this approach.
+
+
+Designing the API: Other Considerations
+---------------------------------------
+
+If your new system call allows userspace to refer to a kernel object, it
+should use a file descriptor as the handle for that object -- don't invent a
+new type of userspace object handle when the kernel already has mechanisms and
+well-defined semantics for using file descriptors.
+
+If your new xyzzy(2) system call does return a new file descriptor, then the
+flags argument should include a value that is equivalent to setting O_CLOEXEC
+on the new FD. This makes it possible for userspace to close the timing
+window between xyzzy() and calling fcntl(fd, F_SETFD, FD_CLOEXEC), where an
+unexpected fork() and execve() in another thread could leak a descriptor to
+the exec'ed program. (However, resist the temptation to re-use the actual value
+of the O_CLOEXEC constant, as it is architecture-specific and is part of a
+numbering space of O_* flags that is fairly full.)
+
+If your system call returns a new file descriptor, you should also consider
+what it means to use the poll(2) family of system calls on that file
+descriptor. Making a file descriptor ready for reading or writing is the
+normal way for the kernel to indicate to userspace that an event has
+occurred on the corresponding kernel object.
+
+If your new xyzzy(2) system call involves a filename argument:
+
+ int sys_xyzzy(const char __user *path, ..., unsigned int flags);
+
+you should also consider whether an xyzzyat(2) version is more appropriate:
+
+ int sys_xyzzyat(int dfd, const char __user *path, ..., unsigned int flags);
+
+This allows more flexibility for how userspace specifies the file in question;
+in particular it allows userspace to request the functionality for an
+already-opened file descriptor using the AT_EMPTY_PATH flag, effectively giving
+an fxyzzy(3) operation for free:
+
+ - xyzzyat(AT_FDCWD, path, ..., 0) is equivalent to xyzzy(path,...)
+ - xyzzyat(fd, "", ..., AT_EMPTY_PATH) is equivalent to fxyzzy(fd, ...)
+
+(For more details on the rationale of the *at() calls, see the openat(2) man
+page; for an example of AT_EMPTY_PATH, see the statat(2) man page.)
+
+If your new xyzzy(2) system call involves a parameter describing an offset
+within a file, make its type loff_t so that 64-bit offsets can be supported
+even on 32-bit architectures.
+
+If your new xyzzy(2) system call involves privileged functionality, it needs
+to be governed by the appropriate Linux capability bit (checked with a call to
+capable()), as described in the capabilities(7) man page. Choose an existing
+capability bit that governs related functionality, but try to avoid combining
+lots of only vaguely related functions together under the same bit, as this
+goes against capabilities' purpose of splitting the power of root. In
+particular, avoid adding new uses of the already overly-general CAP_SYS_ADMIN
+capability.
+
+If your new xyzzy(2) system call manipulates a process other than the calling
+process, it should be restricted (using a call to ptrace_may_access()) so that
+only a calling process with the same permissions as the target process, or
+with the necessary capabilities, can manipulate the target process.
+
+Finally, be aware that some non-x86 architectures have an easier time if
+system call parameters that are explicitly 64-bit fall on odd-numbered
+arguments (i.e. parameter 1, 3, 5), to allow use of contiguous pairs of 32-bit
+registers. (This concern does not apply if the arguments are part of a
+structure that's passed in by pointer.)
+
+
+Proposing the API
+-----------------
+
+To make new system calls easy to review, it's best to divide up the patchset
+into separate chunks. These should include at least the following items as
+distinct commits (each of which is described further below):
+
+ - The core implementation of the system call, together with prototypes,
+ generic numbering, Kconfig changes and fallback stub implementation.
+ - Wiring up of the new system call for one particular architecture, usually
+ x86 (including all of x86_64, x86_32 and x32).
+ - A demonstration of the use of the new system call in userspace via a
+ selftest in tools/testing/selftests/.
+ - A draft man-page for the new system call, either as plain text in the
+ cover letter, or as a patch to the (separate) man-pages repository.
+
+New system call proposals, like any change to the kernel's API, should always
+be cc'ed to linux-api@vger.kernel.org.
+
+
+Generic System Call Implementation
+----------------------------------
+
+The main entry point for your new xyzzy(2) system call will be called
+sys_xyzzy(), but you add this entry point with the appropriate
+SYSCALL_DEFINEn() macro rather than explicitly. The 'n' indicates the number
+of arguments to the system call, and the macro takes the system call name
+followed by the (type, name) pairs for the parameters as arguments. Using
+this macro allows metadata about the new system call to be made available for
+other tools.
+
+The new entry point also needs a corresponding function prototype, in
+include/linux/syscalls.h, marked as asmlinkage to match the way that system
+calls are invoked:
+
+ asmlinkage long sys_xyzzy(...);
+
+Some architectures (e.g. x86) have their own architecture-specific syscall
+tables, but several other architectures share a generic syscall table. Add your
+new system call to the generic list by adding an entry to the list in
+include/uapi/asm-generic/unistd.h:
+
+ #define __NR_xyzzy 292
+ __SYSCALL(__NR_xyzzy, sys_xyzzy)
+
+Also update the __NR_syscalls count to reflect the additional system call, and
+note that if multiple new system calls are added in the same merge window,
+your new syscall number may get adjusted to resolve conflicts.
+
+The file kernel/sys_ni.c provides a fallback stub implementation of each system
+call, returning -ENOSYS. Add your new system call here too:
+
+ cond_syscall(sys_xyzzy);
+
+Your new kernel functionality, and the system call that controls it, should
+normally be optional, so add a CONFIG option (typically to init/Kconfig) for
+it. As usual for new CONFIG options:
+
+ - Include a description of the new functionality and system call controlled
+ by the option.
+ - Make the option depend on EXPERT if it should be hidden from normal users.
+ - Make any new source files implementing the function dependent on the CONFIG
+ option in the Makefile (e.g. "obj-$(CONFIG_XYZZY_SYSCALL) += xyzzy.c").
+ - Double check that the kernel still builds with the new CONFIG option turned
+ off.
+
+To summarize, you need a commit that includes:
+
+ - CONFIG option for the new function, normally in init/Kconfig
+ - SYSCALL_DEFINEn(xyzzy, ...) for the entry point
+ - corresponding prototype in include/linux/syscalls.h
+ - generic table entry in include/uapi/asm-generic/unistd.h
+ - fallback stub in kernel/sys_ni.c
+
+
+x86 System Call Implementation
+------------------------------
+
+To wire up your new system call for x86 platforms, you need to update the
+master syscall tables. Assuming your new system call isn't special in some
+way (see below), this involves a "common" entry (for x86_64 and x32) in
+arch/x86/entry/syscalls/syscall_64.tbl:
+
+ 333 common xyzzy sys_xyzzy
+
+and an "i386" entry in arch/x86/entry/syscalls/syscall_32.tbl:
+
+ 380 i386 xyzzy sys_xyzzy
+
+Again, these numbers are liable to be changed if there are conflicts in the
+relevant merge window.
+
+
+Compatibility System Calls (Generic)
+------------------------------------
+
+For most system calls the same 64-bit implementation can be invoked even when
+the userspace program is itself 32-bit; even if the system call's parameters
+include an explicit pointer, this is handled transparently.
+
+However, there are a couple of situations where a compatibility layer is
+needed to cope with size differences between 32-bit and 64-bit.
+
+The first is if the 64-bit kernel also supports 32-bit userspace programs, and
+so needs to parse areas of (__user) memory that could hold either 32-bit or
+64-bit values. In particular, this is needed whenever a system call argument
+is:
+
+ - a pointer to a pointer
+ - a pointer to a struct containing a pointer (e.g. struct iovec __user *)
+ - a pointer to a varying sized integral type (time_t, off_t, long, ...)
+ - a pointer to a struct containing a varying sized integral type.
+
+The second situation that requires a compatibility layer is if one of the
+system call's arguments has a type that is explicitly 64-bit even on a 32-bit
+architecture, for example loff_t or __u64. In this case, a value that arrives
+at a 64-bit kernel from a 32-bit application will be split into two 32-bit
+values, which then need to be re-assembled in the compatibility layer.
+
+(Note that a system call argument that's a pointer to an explicit 64-bit type
+does *not* need a compatibility layer; for example, splice(2)'s arguments of
+type loff_t __user * do not trigger the need for a compat_ system call.)
+
+The compatibility version of the system call is called compat_sys_xyzzy(), and
+is added with the COMPAT_SYSCALL_DEFINEn() macro, analogously to
+SYSCALL_DEFINEn. This version of the implementation runs as part of a 64-bit
+kernel, but expects to receive 32-bit parameter values and does whatever is
+needed to deal with them. (Typically, the compat_sys_ version converts the
+values to 64-bit versions and either calls on to the sys_ version, or both of
+them call a common inner implementation function.)
+
+The compat entry point also needs a corresponding function prototype, in
+include/linux/compat.h, marked as asmlinkage to match the way that system
+calls are invoked:
+
+ asmlinkage long compat_sys_xyzzy(...);
+
+If the system call involves a structure that is laid out differently on 32-bit
+and 64-bit systems, say struct xyzzy_args, then the include/linux/compat.h
+header file should also include a compat version of the structure (struct
+compat_xyzzy_args) where each variable-size field has the appropriate compat_
+type that corresponds to the type in struct xyzzy_args. The
+compat_sys_xyzzy() routine can then use this compat_ structure to parse the
+arguments from a 32-bit invocation.
+
+For example, if there are fields:
+
+ struct xyzzy_args {
+ const char __user *ptr;
+ __kernel_long_t varying_val;
+ u64 fixed_val;
+ /* ... */
+ };
+
+in struct xyzzy_args, then struct compat_xyzzy_args would have:
+
+ struct compat_xyzzy_args {
+ compat_uptr_t ptr;
+ compat_long_t varying_val;
+ u64 fixed_val;
+ /* ... */
+ };
+
+The generic system call list also needs adjusting to allow for the compat
+version; the entry in include/uapi/asm-generic/unistd.h should use
+__SC_COMP rather than __SYSCALL:
+
+ #define __NR_xyzzy 292
+ __SC_COMP(__NR_xyzzy, sys_xyzzy, compat_sys_xyzzy)
+
+To summarize, you need:
+
+ - a COMPAT_SYSCALL_DEFINEn(xyzzy, ...) for the compat entry point
+ - corresponding prototype in include/linux/compat.h
+ - (if needed) 32-bit mapping struct in include/linux/compat.h
+ - instance of __SC_COMP not __SYSCALL in include/uapi/asm-generic/unistd.h
+
+
+Compatibility System Calls (x86)
+--------------------------------
+
+To wire up the x86 architecture of a system call with a compatibility version,
+the entries in the syscall tables need to be adjusted.
+
+First, the entry in arch/x86/entry/syscalls/syscall_32.tbl gets an extra
+column to indicate that a 32-bit userspace program running on a 64-bit kernel
+should hit the compat entry point:
+
+ 380 i386 xyzzy sys_xyzzy compat_sys_xyzzy
+
+Second, you need to figure out what should happen for the x32 ABI version of
+the new system call. There's a choice here: the layout of the arguments
+should either match the 64-bit version or the 32-bit version.
+
+If there's a pointer-to-a-pointer involved, the decision is easy: x32 is
+ILP32, so the layout should match the 32-bit version, and the entry in
+arch/x86/entry/syscalls/syscall_64.tbl is split so that x32 programs hit the
+compatibility wrapper:
+
+ 333 64 xyzzy sys_xyzzy
+ ...
+ 555 x32 xyzzy compat_sys_xyzzy
+
+If no pointers are involved, then it is preferable to re-use the 64-bit system
+call for the x32 ABI (and consequently the entry in
+arch/x86/entry/syscalls/syscall_64.tbl is unchanged).
+
+In either case, you should check that the types involved in your argument
+layout do indeed map exactly from x32 (-mx32) to either the 32-bit (-m32) or
+64-bit (-m64) equivalents.
+
+
+System Calls Returning Elsewhere
+--------------------------------
+
+For most system calls, once the system call is complete the user program
+continues exactly where it left off -- at the next instruction, with the
+stack the same and most of the registers the same as before the system call,
+and with the same virtual memory space.
+
+However, a few system calls do things differently. They might return to a
+different location (rt_sigreturn) or change the memory space (fork/vfork/clone)
+or even architecture (execve/execveat) of the program.
+
+To allow for this, the kernel implementation of the system call may need to
+save and restore additional registers to the kernel stack, allowing complete
+control of where and how execution continues after the system call.
+
+This is arch-specific, but typically involves defining assembly entry points
+that save/restore additional registers and invoke the real system call entry
+point.
+
+For x86_64, this is implemented as a stub_xyzzy entry point in
+arch/x86/entry/entry_64.S, and the entry in the syscall table
+(arch/x86/entry/syscalls/syscall_64.tbl) is adjusted to match:
+
+ 333 common xyzzy stub_xyzzy
+
+The equivalent for 32-bit programs running on a 64-bit kernel is normally
+called stub32_xyzzy and implemented in arch/x86/entry/entry_64_compat.S,
+with the corresponding syscall table adjustment in
+arch/x86/entry/syscalls/syscall_32.tbl:
+
+ 380 i386 xyzzy sys_xyzzy stub32_xyzzy
+
+If the system call needs a compatibility layer (as in the previous section)
+then the stub32_ version needs to call on to the compat_sys_ version of the
+system call rather than the native 64-bit version. Also, if the x32 ABI
+implementation is not common with the x86_64 version, then its syscall
+table will also need to invoke a stub that calls on to the compat_sys_
+version.
+
+For completeness, it's also nice to set up a mapping so that user-mode Linux
+still works -- its syscall table will reference stub_xyzzy, but the UML build
+doesn't include arch/x86/entry/entry_64.S implementation (because UML
+simulates registers etc). Fixing this is as simple as adding a #define to
+arch/x86/um/sys_call_table_64.c:
+
+ #define stub_xyzzy sys_xyzzy
+
+
+Other Details
+-------------
+
+Most of the kernel treats system calls in a generic way, but there is the
+occasional exception that may need updating for your particular system call.
+
+The audit subsystem is one such special case; it includes (arch-specific)
+functions that classify some special types of system call -- specifically
+file open (open/openat), program execution (execve/exeveat) or socket
+multiplexor (socketcall) operations. If your new system call is analogous to
+one of these, then the audit system should be updated.
+
+More generally, if there is an existing system call that is analogous to your
+new system call, it's worth doing a kernel-wide grep for the existing system
+call to check there are no other special cases.
+
+
+Testing
+-------
+
+A new system call should obviously be tested; it is also useful to provide
+reviewers with a demonstration of how user space programs will use the system
+call. A good way to combine these aims is to include a simple self-test
+program in a new directory under tools/testing/selftests/.
+
+For a new system call, there will obviously be no libc wrapper function and so
+the test will need to invoke it using syscall(); also, if the system call
+involves a new userspace-visible structure, the corresponding header will need
+to be installed to compile the test.
+
+Make sure the selftest runs successfully on all supported architectures. For
+example, check that it works when compiled as an x86_64 (-m64), x86_32 (-m32)
+and x32 (-mx32) ABI program.
+
+For more extensive and thorough testing of new functionality, you should also
+consider adding tests to the Linux Test Project, or to the xfstests project
+for filesystem-related changes.
+ - https://linux-test-project.github.io/
+ - git://git.kernel.org/pub/scm/fs/xfs/xfstests-dev.git
+
+
+Man Page
+--------
+
+All new system calls should come with a complete man page, ideally using groff
+markup, but plain text will do. If groff is used, it's helpful to include a
+pre-rendered ASCII version of the man page in the cover email for the
+patchset, for the convenience of reviewers.
+
+The man page should be cc'ed to linux-man@vger.kernel.org
+For more details, see https://www.kernel.org/doc/man-pages/patches.html
+
+References and Sources
+----------------------
+
+ - LWN article from Michael Kerrisk on use of flags argument in system calls:
+ https://lwn.net/Articles/585415/
+ - LWN article from Michael Kerrisk on how to handle unknown flags in a system
+ call: https://lwn.net/Articles/588444/
+ - LWN article from Jake Edge describing constraints on 64-bit system call
+ arguments: https://lwn.net/Articles/311630/
+ - Pair of LWN articles from David Drysdale that describe the system call
+ implementation paths in detail for v3.14:
+ - https://lwn.net/Articles/604287/
+ - https://lwn.net/Articles/604515/
+ - Architecture-specific requirements for system calls are discussed in the
+ syscall(2) man-page:
+ http://man7.org/linux/man-pages/man2/syscall.2.html#NOTES
+ - Collated emails from Linus Torvalds discussing the problems with ioctl():
+ http://yarchive.net/comp/linux/ioctl.html
+ - "How to not invent kernel interfaces", Arnd Bergmann,
+ http://www.ukuug.org/events/linux2007/2007/papers/Bergmann.pdf
+ - LWN article from Michael Kerrisk on avoiding new uses of CAP_SYS_ADMIN:
+ https://lwn.net/Articles/486306/
+ - Recommendation from Andrew Morton that all related information for a new
+ system call should come in the same email thread:
+ https://lkml.org/lkml/2014/7/24/641
+ - Recommendation from Michael Kerrisk that a new system call should come with
+ a man page: https://lkml.org/lkml/2014/6/13/309
+ - Suggestion from Thomas Gleixner that x86 wire-up should be in a separate
+ commit: https://lkml.org/lkml/2014/11/19/254
+ - Suggestion from Greg Kroah-Hartman that it's good for new system calls to
+ come with a man-page & selftest: https://lkml.org/lkml/2014/3/19/710
+ - Discussion from Michael Kerrisk of new system call vs. prctl(2) extension:
+ https://lkml.org/lkml/2014/6/3/411
+ - Suggestion from Ingo Molnar that system calls that involve multiple
+ arguments should encapsulate those arguments in a struct, which includes a
+ size field for future extensibility: https://lkml.org/lkml/2015/7/30/117
+ - Numbering oddities arising from (re-)use of O_* numbering space flags:
+ - commit 75069f2b5bfb ("vfs: renumber FMODE_NONOTIFY and add to uniqueness
+ check")
+ - commit 12ed2e36c98a ("fanotify: FMODE_NONOTIFY and __O_SYNC in sparc
+ conflict")
+ - commit bb458c644a59 ("Safer ABI for O_TMPFILE")
+ - Discussion from Matthew Wilcox about restrictions on 64-bit arguments:
+ https://lkml.org/lkml/2008/12/12/187
+ - Recommendation from Greg Kroah-Hartman that unknown flags should be
+ policed: https://lkml.org/lkml/2014/7/17/577
+ - Recommendation from Linus Torvalds that x32 system calls should prefer
+ compatibility with 64-bit versions rather than 32-bit versions:
+ https://lkml.org/lkml/2011/8/31/244
diff --git a/Documentation/arm/Atmel/README b/Documentation/arm/Atmel/README
index c53a19b4aab2..0931cf7e2e56 100644
--- a/Documentation/arm/Atmel/README
+++ b/Documentation/arm/Atmel/README
@@ -90,6 +90,11 @@ the Atmel website: http://www.atmel.com.
+ Datasheet
http://www.atmel.com/Images/Atmel-11238-32-bit-Cortex-A5-Microcontroller-SAMA5D4_Datasheet.pdf
+ - sama5d2 family
+ - sama5d27
+ + Datasheet
+ Coming soon
+
Linux kernel information
------------------------
diff --git a/Documentation/arm/Samsung/Bootloader-interface.txt b/Documentation/arm/Samsung/Bootloader-interface.txt
index b96ead9a6919..df8d4fb85939 100644
--- a/Documentation/arm/Samsung/Bootloader-interface.txt
+++ b/Documentation/arm/Samsung/Bootloader-interface.txt
@@ -15,6 +15,7 @@ executing kernel.
1. Non-Secure mode
+
Address: sysram_ns_base_addr
Offset Value Purpose
=============================================================================
@@ -28,6 +29,7 @@ Offset Value Purpose
2. Secure mode
+
Address: sysram_base_addr
Offset Value Purpose
=============================================================================
@@ -40,14 +42,25 @@ Offset Value Purpose
Address: pmu_base_addr
Offset Value Purpose
=============================================================================
-0x0800 exynos_cpu_resume AFTR
+0x0800 exynos_cpu_resume AFTR, suspend
+0x0800 mcpm_entry_point (Exynos542x with MCPM) AFTR, suspend
+0x0804 0xfcba0d10 (Magic cookie) AFTR
+0x0804 0x00000bad (Magic cookie) System suspend
0x0814 exynos4_secondary_startup (Exynos4210 r1.1) Secondary CPU boot
0x0818 0xfcba0d10 (Magic cookie, Exynos4210 r1.1) AFTR
0x081C exynos_cpu_resume (Exynos4210 r1.1) AFTR
3. Other (regardless of secure/non-secure mode)
+
Address: pmu_base_addr
Offset Value Purpose
=============================================================================
0x0908 Non-zero (only Exynos3250) Secondary CPU boot up indicator
+
+
+4. Glossary
+
+AFTR - ARM Off Top Running, a low power mode, Cortex cores and many other
+modules are power gated, except the TOP modules
+MCPM - Multi-Cluster Power Management
diff --git a/Documentation/arm/keystone/Overview.txt b/Documentation/arm/keystone/Overview.txt
new file mode 100644
index 000000000000..f17bc4c9dff9
--- /dev/null
+++ b/Documentation/arm/keystone/Overview.txt
@@ -0,0 +1,73 @@
+ TI Keystone Linux Overview
+ --------------------------
+
+Introduction
+------------
+Keystone range of SoCs are based on ARM Cortex-A15 MPCore Processors
+and c66x DSP cores. This document describes essential information required
+for users to run Linux on Keystone based EVMs from Texas Instruments.
+
+Following SoCs & EVMs are currently supported:-
+
+------------ K2HK SoC and EVM --------------------------------------------------
+
+a.k.a Keystone 2 Hawking/Kepler SoC
+TCI6636K2H & TCI6636K2K: See documentation at
+ http://www.ti.com/product/tci6638k2k
+ http://www.ti.com/product/tci6638k2h
+
+EVM:
+http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx
+
+------------ K2E SoC and EVM ---------------------------------------------------
+
+a.k.a Keystone 2 Edison SoC
+K2E - 66AK2E05: See documentation at
+ http://www.ti.com/product/66AK2E05/technicaldocuments
+
+EVM:
+https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html
+
+------------ K2L SoC and EVM ---------------------------------------------------
+
+a.k.a Keystone 2 Lamarr SoC
+K2L - TCI6630K2L: See documentation at
+ http://www.ti.com/product/TCI6630K2L/technicaldocuments
+EVM:
+https://www.einfochips.com/index.php/partnerships/texas-instruments/k2l-evm.html
+
+Configuration
+-------------
+
+All of the K2 SoCs/EVMs share a common defconfig, keystone_defconfig and same
+image is used to boot on individual EVMs. The platform configuration is
+specified through DTS. Following are the DTS used:-
+ K2HK EVM : k2hk-evm.dts
+ K2E EVM : k2e-evm.dts
+ K2L EVM : k2l-evm.dts
+
+The device tree documentation for the keystone machines are located at
+ Documentation/devicetree/bindings/arm/keystone/keystone.txt
+
+Known issues & workaround
+-------------------------
+
+Some of the device drivers used on keystone are re-used from that from
+DaVinci and other TI SoCs. These device drivers may use clock APIs directly.
+Some of the keystone specific drivers such as netcp uses run time power
+management API instead to enable clock. As this API has limitations on
+keystone, following workaround is needed to boot Linux.
+
+ Add 'clk_ignore_unused' to the bootargs env variable in u-boot. Otherwise
+ clock frameworks will try to disable clocks that are unused and disable
+ the hardware. This is because netcp related power domain and clock
+ domains are enabled in u-boot as run time power management API currently
+ doesn't enable clocks for netcp due to a limitation. This workaround is
+ expected to be removed in the future when proper API support becomes
+ available. Until then, this work around is needed.
+
+
+Document Author
+---------------
+Murali Karicheri <m-karicheri2@ti.com>
+Copyright 2015 Texas Instruments
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index fd12c0d835fd..5be8a7f4cc7f 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -1109,7 +1109,7 @@ it will loop and handle as many sectors (on a bio-segment granularity)
as specified.
Now bh->b_end_io is replaced by bio->bi_end_io, but most of the time the
-right thing to use is bio_endio(bio, uptodate) instead.
+right thing to use is bio_endio(bio) instead.
If the driver is dropping the io_request_lock from its request_fn strategy,
then it just needs to replace that with q->queue_lock instead.
diff --git a/Documentation/block/biovecs.txt b/Documentation/block/biovecs.txt
index 74a32ad52f53..25689584e6e0 100644
--- a/Documentation/block/biovecs.txt
+++ b/Documentation/block/biovecs.txt
@@ -24,7 +24,7 @@ particular, presenting the illusion of partially completed biovecs so that
normal code doesn't have to deal with bi_bvec_done.
* Driver code should no longer refer to biovecs directly; we now have
- bio_iovec() and bio_iovec_iter() macros that return literal struct biovecs,
+ bio_iovec() and bio_iter_iovec() macros that return literal struct biovecs,
constructed from the raw biovecs but taking into account bi_bvec_done and
bi_size.
@@ -109,3 +109,11 @@ Other implications:
over all the biovecs in the new bio - which is silly as it's not needed.
So, don't use bi_vcnt anymore.
+
+ * The current interface allows the block layer to split bios as needed, so we
+ could eliminate a lot of complexity particularly in stacked drivers. Code
+ that creates bios can then create whatever size bios are convenient, and
+ more importantly stacked drivers don't have to deal with both their own bio
+ size limitations and the limitations of the underlying devices. Thus
+ there's no need to define ->merge_bvec_fn() callbacks for individual block
+ drivers.
diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt
index 3a29f8914df9..e5d914845be6 100644
--- a/Documentation/block/queue-sysfs.txt
+++ b/Documentation/block/queue-sysfs.txt
@@ -20,7 +20,7 @@ This shows the size of internal allocation of the device in bytes, if
reported by the device. A value of '0' means device does not support
the discard functionality.
-discard_max_bytes (RO)
+discard_max_hw_bytes (RO)
----------------------
Devices that support discard functionality may have internal limits on
the number of bytes that can be trimmed or unmapped in a single operation.
@@ -29,6 +29,14 @@ number of bytes that can be discarded in a single operation. Discard
requests issued to the device must not exceed this limit. A discard_max_bytes
value of 0 means that the device does not support discard functionality.
+discard_max_bytes (RW)
+----------------------
+While discard_max_hw_bytes is the hardware limit for the device, this
+setting is the software limit. Some devices exhibit large latencies when
+large discards are issued, setting this value lower will make Linux issue
+smaller discards and potentially help reduce latencies induced by large
+discard operations.
+
discard_zeroes_data (RO)
------------------------
When read, this file will show if the discarded block are zeroed by the
diff --git a/Documentation/cgroups/00-INDEX b/Documentation/cgroups/00-INDEX
index 96ce071a3633..3f5a40f57d4a 100644
--- a/Documentation/cgroups/00-INDEX
+++ b/Documentation/cgroups/00-INDEX
@@ -22,6 +22,8 @@ net_cls.txt
- Network classifier cgroups details and usages.
net_prio.txt
- Network priority cgroups details and usages.
+pids.txt
+ - Process number cgroups details and usages.
resource_counter.txt
- Resource Counter API.
unified-hierarchy.txt
diff --git a/Documentation/cgroups/pids.txt b/Documentation/cgroups/pids.txt
new file mode 100644
index 000000000000..1a078b5d281a
--- /dev/null
+++ b/Documentation/cgroups/pids.txt
@@ -0,0 +1,85 @@
+ Process Number Controller
+ =========================
+
+Abstract
+--------
+
+The process number controller is used to allow a cgroup hierarchy to stop any
+new tasks from being fork()'d or clone()'d after a certain limit is reached.
+
+Since it is trivial to hit the task limit without hitting any kmemcg limits in
+place, PIDs are a fundamental resource. As such, PID exhaustion must be
+preventable in the scope of a cgroup hierarchy by allowing resource limiting of
+the number of tasks in a cgroup.
+
+Usage
+-----
+
+In order to use the `pids` controller, set the maximum number of tasks in
+pids.max (this is not available in the root cgroup for obvious reasons). The
+number of processes currently in the cgroup is given by pids.current.
+
+Organisational operations are not blocked by cgroup policies, so it is possible
+to have pids.current > pids.max. This can be done by either setting the limit to
+be smaller than pids.current, or attaching enough processes to the cgroup such
+that pids.current > pids.max. However, it is not possible to violate a cgroup
+policy through fork() or clone(). fork() and clone() will return -EAGAIN if the
+creation of a new process would cause a cgroup policy to be violated.
+
+To set a cgroup to have no limit, set pids.max to "max". This is the default for
+all new cgroups (N.B. that PID limits are hierarchical, so the most stringent
+limit in the hierarchy is followed).
+
+pids.current tracks all child cgroup hierarchies, so parent/pids.current is a
+superset of parent/child/pids.current.
+
+Example
+-------
+
+First, we mount the pids controller:
+# mkdir -p /sys/fs/cgroup/pids
+# mount -t cgroup -o pids none /sys/fs/cgroup/pids
+
+Then we create a hierarchy, set limits and attach processes to it:
+# mkdir -p /sys/fs/cgroup/pids/parent/child
+# echo 2 > /sys/fs/cgroup/pids/parent/pids.max
+# echo $$ > /sys/fs/cgroup/pids/parent/cgroup.procs
+# cat /sys/fs/cgroup/pids/parent/pids.current
+2
+#
+
+It should be noted that attempts to overcome the set limit (2 in this case) will
+fail:
+
+# cat /sys/fs/cgroup/pids/parent/pids.current
+2
+# ( /bin/echo "Here's some processes for you." | cat )
+sh: fork: Resource temporary unavailable
+#
+
+Even if we migrate to a child cgroup (which doesn't have a set limit), we will
+not be able to overcome the most stringent limit in the hierarchy (in this case,
+parent's):
+
+# echo $$ > /sys/fs/cgroup/pids/parent/child/cgroup.procs
+# cat /sys/fs/cgroup/pids/parent/pids.current
+2
+# cat /sys/fs/cgroup/pids/parent/child/pids.current
+2
+# cat /sys/fs/cgroup/pids/parent/child/pids.max
+max
+# ( /bin/echo "Here's some processes for you." | cat )
+sh: fork: Resource temporary unavailable
+#
+
+We can set a limit that is smaller than pids.current, which will stop any new
+processes from being forked at all (note that the shell itself counts towards
+pids.current):
+
+# echo 1 > /sys/fs/cgroup/pids/parent/pids.max
+# /bin/echo "We can't even spawn a single process now."
+sh: fork: Resource temporary unavailable
+# echo 0 > /sys/fs/cgroup/pids/parent/pids.max
+# /bin/echo "We can't even spawn a single process now."
+sh: fork: Resource temporary unavailable
+#
diff --git a/Documentation/cgroups/unified-hierarchy.txt b/Documentation/cgroups/unified-hierarchy.txt
index 86847a7647ab..1ee9caf29e57 100644
--- a/Documentation/cgroups/unified-hierarchy.txt
+++ b/Documentation/cgroups/unified-hierarchy.txt
@@ -23,10 +23,13 @@ CONTENTS
5. Other Changes
5-1. [Un]populated Notification
5-2. Other Core Changes
- 5-3. Per-Controller Changes
- 5-3-1. blkio
- 5-3-2. cpuset
- 5-3-3. memory
+ 5-3. Controller File Conventions
+ 5-3-1. Format
+ 5-3-2. Control Knobs
+ 5-4. Per-Controller Changes
+ 5-4-1. blkio
+ 5-4-2. cpuset
+ 5-4-3. memory
6. Planned Changes
6-1. CAP for resource control
@@ -372,14 +375,75 @@ supported and the interface files "release_agent" and
- The "cgroup.clone_children" file is removed.
-5-3. Per-Controller Changes
+5-3. Controller File Conventions
-5-3-1. blkio
+5-3-1. Format
+
+In general, all controller files should be in one of the following
+formats whenever possible.
+
+- Values only files
+
+ VAL0 VAL1...\n
+
+- Flat keyed files
+
+ KEY0 VAL0\n
+ KEY1 VAL1\n
+ ...
+
+- Nested keyed files
+
+ KEY0 SUB_KEY0=VAL00 SUB_KEY1=VAL01...
+ KEY1 SUB_KEY0=VAL10 SUB_KEY1=VAL11...
+ ...
+
+For a writeable file, the format for writing should generally match
+reading; however, controllers may allow omitting later fields or
+implement restricted shortcuts for most common use cases.
+
+For both flat and nested keyed files, only the values for a single key
+can be written at a time. For nested keyed files, the sub key pairs
+may be specified in any order and not all pairs have to be specified.
+
+
+5-3-2. Control Knobs
+
+- Settings for a single feature should generally be implemented in a
+ single file.
+
+- In general, the root cgroup should be exempt from resource control
+ and thus shouldn't have resource control knobs.
+
+- If a controller implements ratio based resource distribution, the
+ control knob should be named "weight" and have the range [1, 10000]
+ and 100 should be the default value. The values are chosen to allow
+ enough and symmetric bias in both directions while keeping it
+ intuitive (the default is 100%).
+
+- If a controller implements an absolute resource guarantee and/or
+ limit, the control knobs should be named "min" and "max"
+ respectively. If a controller implements best effort resource
+ gurantee and/or limit, the control knobs should be named "low" and
+ "high" respectively.
+
+ In the above four control files, the special token "max" should be
+ used to represent upward infinity for both reading and writing.
+
+- If a setting has configurable default value and specific overrides,
+ the default settings should be keyed with "default" and appear as
+ the first entry in the file. Specific entries can use "default" as
+ its value to indicate inheritance of the default value.
+
+
+5-4. Per-Controller Changes
+
+5-4-1. blkio
- blk-throttle becomes properly hierarchical.
-5-3-2. cpuset
+5-4-2. cpuset
- Tasks are kept in empty cpusets after hotplug and take on the masks
of the nearest non-empty ancestor, instead of being moved to it.
@@ -388,7 +452,7 @@ supported and the interface files "release_agent" and
masks of the nearest non-empty ancestor.
-5-3-3. memory
+5-4-3. memory
- use_hierarchy is on by default and the cgroup file for the flag is
not created.
diff --git a/Documentation/clk.txt b/Documentation/clk.txt
index f463bdc37f88..5c4bc4d01d0c 100644
--- a/Documentation/clk.txt
+++ b/Documentation/clk.txt
@@ -71,12 +71,8 @@ the operations defined in clk.h:
long (*round_rate)(struct clk_hw *hw,
unsigned long rate,
unsigned long *parent_rate);
- long (*determine_rate)(struct clk_hw *hw,
- unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk);
+ int (*determine_rate)(struct clk_hw *hw,
+ struct clk_rate_request *req);
int (*set_parent)(struct clk_hw *hw, u8 index);
u8 (*get_parent)(struct clk_hw *hw);
int (*set_rate)(struct clk_hw *hw,
diff --git a/Documentation/cpu-freq/core.txt b/Documentation/cpu-freq/core.txt
index 70933eadc308..ba78e7c2a069 100644
--- a/Documentation/cpu-freq/core.txt
+++ b/Documentation/cpu-freq/core.txt
@@ -55,16 +55,13 @@ transition notifiers.
----------------------------
These are notified when a new policy is intended to be set. Each
-CPUFreq policy notifier is called three times for a policy transition:
+CPUFreq policy notifier is called twice for a policy transition:
1.) During CPUFREQ_ADJUST all CPUFreq notifiers may change the limit if
they see a need for this - may it be thermal considerations or
hardware limitations.
-2.) During CPUFREQ_INCOMPATIBLE only changes may be done in order to avoid
- hardware failure.
-
-3.) And during CPUFREQ_NOTIFY all notifiers are informed of the new policy
+2.) And during CPUFREQ_NOTIFY all notifiers are informed of the new policy
- if two hardware drivers failed to agree on a new policy before this
stage, the incompatible hardware shall be shut down, and the user
informed of this.
diff --git a/Documentation/devicetree/bindings/arc/archs-pct.txt b/Documentation/devicetree/bindings/arc/archs-pct.txt
new file mode 100644
index 000000000000..1ae98b87c640
--- /dev/null
+++ b/Documentation/devicetree/bindings/arc/archs-pct.txt
@@ -0,0 +1,17 @@
+* ARC HS Performance Counters
+
+The ARC HS can be configured with a pipeline performance monitor for counting
+CPU and cache events like cache misses and hits. Like conventional PCT there
+are 100+ hardware conditions dynamically mapped to upto 32 counters.
+It also supports overflow interrupts.
+
+Required properties:
+
+- compatible : should contain
+ "snps,archs-pct"
+
+Example:
+
+pmu {
+ compatible = "snps,archs-pct";
+};
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
index 424ac8cbfa08..7fd64ec9ee1d 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@@ -27,6 +27,8 @@ compatible: must be one of:
o "atmel,at91sam9xe"
* "atmel,sama5" for SoCs using a Cortex-A5, shall be extended with the specific
SoC family:
+ o "atmel,sama5d2" shall be extended with the specific SoC compatible:
+ - "atmel,sama5d27"
o "atmel,sama5d3" shall be extended with the specific SoC compatible:
- "atmel,sama5d31"
- "atmel,sama5d33"
@@ -50,6 +52,7 @@ System Timer (ST) required properties:
- reg: Should contain registers location and length
- interrupts: Should contain interrupt for the ST which is the IRQ line
shared across all System Controller members.
+- clocks: phandle to input clock.
Its subnodes can be:
- watchdog: compatible should be "atmel,at91rm9200-wdt"
@@ -61,7 +64,7 @@ TC/TCLIB Timer required properties:
Note that you can specify several interrupt cells if the TC
block has one interrupt per channel.
- clock-names: tuple listing input clock names.
- Required elements: "t0_clk"
+ Required elements: "t0_clk", "slow_clk"
Optional elements: "t1_clk", "t2_clk"
- clocks: phandles to input clocks.
@@ -87,14 +90,16 @@ One interrupt per TC channel in a TC block:
RSTC Reset Controller required properties:
- compatible: Should be "atmel,<chip>-rstc".
- <chip> can be "at91sam9260" or "at91sam9g45"
+ <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3"
- reg: Should contain registers location and length
+- clocks: phandle to input clock.
Example:
rstc@fffffd00 {
compatible = "atmel,at91sam9260-rstc";
reg = <0xfffffd00 0x10>;
+ clocks = <&clk32k>;
};
RAMC SDRAM/DDR Controller required properties:
@@ -117,6 +122,7 @@ required properties:
- compatible: Should be "atmel,<chip>-shdwc".
<chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
- reg: Should contain registers location and length
+- clocks: phandle to input clock.
optional properties:
- atmel,wakeup-mode: String, operation mode of the wakeup mode.
@@ -135,9 +141,10 @@ optional at91sam9x5 properties:
Example:
- rstc@fffffd00 {
- compatible = "atmel,at91sam9260-rstc";
- reg = <0xfffffd00 0x10>;
+ shdwc@fffffd10 {
+ compatible = "atmel,at91sam9260-shdwc";
+ reg = <0xfffffd10 0x10>;
+ clocks = <&clk32k>;
};
Special Function Registers (SFR)
diff --git a/Documentation/devicetree/bindings/arm/bcm/ns2.txt b/Documentation/devicetree/bindings/arm/bcm/ns2.txt
new file mode 100644
index 000000000000..35f056f4a1c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/ns2.txt
@@ -0,0 +1,9 @@
+Broadcom North Star 2 (NS2) device tree bindings
+------------------------------------------------
+
+Boards with NS2 shall have the following properties:
+
+Required root node property:
+
+NS2 SVK board
+compatible = "brcm,ns2-svk", "brcm,ns2";
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt
new file mode 100644
index 000000000000..6824b3180ffb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt
@@ -0,0 +1,14 @@
+Raspberry Pi VideoCore firmware driver
+
+Required properties:
+
+- compatible: Should be "raspberrypi,bcm2835-firmware"
+- mboxes: Phandle to the firmware device's Mailbox.
+ (See: ../mailbox/mailbox.txt for more information)
+
+Example:
+
+firmware {
+ compatible = "raspberrypi,bcm2835-firmware";
+ mboxes = <&mailbox>;
+};
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
index 65a6db2271a2..62938eb9697f 100644
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@@ -17,6 +17,7 @@ its hardware characteristcs.
- "arm,coresight-tmc", "arm,primecell";
- "arm,coresight-funnel", "arm,primecell";
- "arm,coresight-etm3x", "arm,primecell";
+ - "arm,coresight-etm4x", "arm,primecell";
- "qcom,coresight-replicator1x", "arm,primecell";
* reg: physical base address and length of the register
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index d6b794cef0b8..91e6e5c478d0 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -199,6 +199,7 @@ nodes to be present and contain the properties described below.
"qcom,kpss-acc-v1"
"qcom,kpss-acc-v2"
"rockchip,rk3066-smp"
+ "ste,dbx500-smp"
- cpu-release-addr
Usage: required for systems that have an "enable-method"
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
index c431c67524d6..c733e28e18e5 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -127,6 +127,24 @@ Example:
#clock-cells = <1>;
};
+
+Hisilicon Hi6220 SRAM controller
+
+Required properties:
+- compatible : "hisilicon,hi6220-sramctrl", "syscon"
+- reg : Register address and size
+
+Hisilicon's SoCs use sram for multiple purpose; on Hi6220 there have several
+SRAM banks for power management, modem, security, etc. Further, use "syscon"
+managing the common sram which can be shared by multiple modules.
+
+Example:
+ /*for Hi6220*/
+ sram: sram@fff80000 {
+ compatible = "hisilicon,hi6220-sramctrl", "syscon";
+ reg = <0x0 0xfff80000 0x0 0x12000>;
+ };
+
-----------------------------------------------------------------------
Hisilicon HiP01 system controller
diff --git a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
index 4f40ff3fee4b..5171ad8f48ff 100644
--- a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
+++ b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
@@ -20,6 +20,8 @@ And in addition, the compatible shall be extended with the specific
board. Currently known boards are:
"buffalo,lschlv2"
+"buffalo,lswvl"
+"buffalo,lswxl"
"buffalo,lsxhl"
"buffalo,lsxl"
"dlink,dns-320"
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index dd7550a29db6..618a91994a18 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -1,12 +1,15 @@
-MediaTek mt65xx & mt81xx Platforms Device Tree Bindings
+MediaTek mt65xx, mt67xx & mt81xx Platforms Device Tree Bindings
-Boards with a MediaTek mt65xx/mt81xx SoC shall have the following property:
+Boards with a MediaTek mt65xx/mt67xx/mt81xx SoC shall have the
+following property:
Required root node property:
compatible: Must contain one of
+ "mediatek,mt6580"
"mediatek,mt6589"
"mediatek,mt6592"
+ "mediatek,mt6795"
"mediatek,mt8127"
"mediatek,mt8135"
"mediatek,mt8173"
@@ -14,12 +17,18 @@ compatible: Must contain one of
Supported boards:
+- Evaluation board for MT6580:
+ Required root node properties:
+ - compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
- bq Aquaris5 smart phone:
Required root node properties:
- compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589";
- Evaluation board for MT6592:
Required root node properties:
- compatible = "mediatek,mt6592-evb", "mediatek,mt6592";
+- Evaluation board for MT6795(Helio X10):
+ Required root node properties:
+ - compatible = "mediatek,mt6795-evb", "mediatek,mt6795";
- MTK mt8127 tablet moose EVB:
Required root node properties:
- compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt
index 4f5a5352ccd8..afef6a85ac51 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt
@@ -1,4 +1,4 @@
-Mediatek 65xx/81xx sysirq
++Mediatek 65xx/67xx/81xx sysirq
Mediatek SOCs sysirq support controllable irq inverter for each GIC SPI
interrupt.
@@ -8,9 +8,11 @@ Required properties:
"mediatek,mt8173-sysirq"
"mediatek,mt8135-sysirq"
"mediatek,mt8127-sysirq"
+ "mediatek,mt6795-sysirq"
"mediatek,mt6592-sysirq"
"mediatek,mt6589-sysirq"
"mediatek,mt6582-sysirq"
+ "mediatek,mt6580-sysirq"
"mediatek,mt6577-sysirq"
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Use the same format as specified by GIC in
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 4f6a82cef1d1..9f4e5136e568 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -135,6 +135,9 @@ Boards:
- AM335X OrionLXm : Substation Automation Platform
compatible = "novatech,am335x-lxm", "ti,am33xx"
+- AM335X phyBOARD-WEGA: Single Board Computer dev kit
+ compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"
+
- OMAP5 EVM : Evaluation Module
compatible = "ti,omap5-evm", "ti,omap5"
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 60d4a1e0a9b5..af58cd74aeff 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -26,3 +26,38 @@ Rockchip platforms device tree bindings
- ChipSPARK PopMetal-RK3288 board:
Required root node properties:
- compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
+
+- Netxeon R89 board:
+ Required root node properties:
+ - compatible = "netxeon,r89", "rockchip,rk3288";
+
+- Google Jerry (Hisense Chromebook C11 and more):
+ Required root node properties:
+ - compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",
+ "google,veyron-jerry-rev5", "google,veyron-jerry-rev4",
+ "google,veyron-jerry-rev3", "google,veyron-jerry",
+ "google,veyron", "rockchip,rk3288";
+
+- Google Minnie (Asus Chromebook Flip C100P):
+ Required root node properties:
+ - compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3",
+ "google,veyron-minnie-rev2", "google,veyron-minnie-rev1",
+ "google,veyron-minnie-rev0", "google,veyron-minnie",
+ "google,veyron", "rockchip,rk3288";
+
+- Google Pinky (dev-board):
+ Required root node properties:
+ - compatible = "google,veyron-pinky-rev2", "google,veyron-pinky",
+ "google,veyron", "rockchip,rk3288";
+
+- Google Speedy (Asus C201 Chromebook):
+ Required root node properties:
+ - compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8",
+ "google,veyron-speedy-rev7", "google,veyron-speedy-rev6",
+ "google,veyron-speedy-rev5", "google,veyron-speedy-rev4",
+ "google,veyron-speedy-rev3", "google,veyron-speedy-rev2",
+ "google,veyron-speedy", "google,veyron", "rockchip,rk3288";
+
+- Rockchip R88 board:
+ Required root node properties:
+ - compatible = "rockchip,r88", "rockchip,rk3368";
diff --git a/Documentation/devicetree/bindings/arm/sp810.txt b/Documentation/devicetree/bindings/arm/sp810.txt
new file mode 100644
index 000000000000..6808fb5dee40
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sp810.txt
@@ -0,0 +1,46 @@
+SP810 System Controller
+-----------------------
+
+Required properties:
+
+- compatible: standard compatible string for a Primecell peripheral,
+ see Documentation/devicetree/bindings/arm/primecell.txt
+ for more details
+ should be: "arm,sp810", "arm,primecell"
+
+- reg: standard registers property, physical address and size
+ of the control registers
+
+- clock-names: from the common clock bindings, for more details see
+ Documentation/devicetree/bindings/clock/clock-bindings.txt;
+ should be: "refclk", "timclk", "apb_pclk"
+
+- clocks: from the common clock bindings, phandle and clock
+ specifier pairs for the entries of clock-names property
+
+- #clock-cells: from the common clock bindings;
+ should be: <1>
+
+- clock-output-names: from the common clock bindings;
+ should be: "timerclken0", "timerclken1", "timerclken2", "timerclken3"
+
+- assigned-clocks: from the common clock binding;
+ should be: clock specifier for each output clock of this
+ provider node
+
+- assigned-clock-parents: from the common clock binding;
+ should be: phandle of input clock listed in clocks
+ property with the highest frequency
+
+Example:
+ v2m_sysctl: sysctl@020000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x020000 0x1000>;
+ clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+ assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+ assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+
+ };
diff --git a/Documentation/devicetree/bindings/clock/gpio-mux-clock.txt b/Documentation/devicetree/bindings/clock/gpio-mux-clock.txt
new file mode 100644
index 000000000000..2be1e038ca62
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/gpio-mux-clock.txt
@@ -0,0 +1,19 @@
+Binding for simple gpio clock multiplexer.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "gpio-mux-clock".
+- clocks: list of two references to parent clocks.
+- #clock-cells : from common clock binding; shall be set to 0.
+- select-gpios : GPIO reference for selecting the parent clock.
+
+Example:
+ clock {
+ compatible = "gpio-mux-clock";
+ clocks = <&parentclk1>, <&parentclk2>;
+ #clock-cells = <0>;
+ select-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/hi6220-clock.txt b/Documentation/devicetree/bindings/clock/hi6220-clock.txt
index 259e30af9597..e4d5feaebc29 100644
--- a/Documentation/devicetree/bindings/clock/hi6220-clock.txt
+++ b/Documentation/devicetree/bindings/clock/hi6220-clock.txt
@@ -15,19 +15,36 @@ Required Properties:
- "hisilicon,hi6220-sysctrl"
- "hisilicon,hi6220-mediactrl"
- "hisilicon,hi6220-pmctrl"
+ - "hisilicon,hi6220-stub-clk"
- reg: physical base address of the controller and length of memory mapped
region.
- #clock-cells: should be 1.
-For example:
+Optional Properties:
+
+- hisilicon,hi6220-clk-sram: phandle to the syscon managing the SoC internal sram;
+ the driver need use the sram to pass parameters for frequency change.
+
+- mboxes: use the label reference for the mailbox as the first parameter, the
+ second parameter is the channel number.
+
+Example 1:
sys_ctrl: sys_ctrl@f7030000 {
compatible = "hisilicon,hi6220-sysctrl", "syscon";
reg = <0x0 0xf7030000 0x0 0x2000>;
#clock-cells = <1>;
};
+Example 2:
+ stub_clock: stub_clock {
+ compatible = "hisilicon,hi6220-stub-clk";
+ hisilicon,hi6220-clk-sram = <&sram>;
+ #clock-cells = <1>;
+ mboxes = <&mailbox 1>;
+ };
+
Each clock is assigned an identifier and client nodes use this identifier
to specify the clock which they consume.
diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.txt b/Documentation/devicetree/bindings/clock/imx6ul-clock.txt
new file mode 100644
index 000000000000..571d5039f663
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.txt
@@ -0,0 +1,13 @@
+* Clock bindings for Freescale i.MX6 UltraLite
+
+Required properties:
+- compatible: Should be "fsl,imx6ul-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+- clocks: list of clock specifiers, must contain an entry for each required
+ entry in clock-names
+- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6ul-clock.h
+for the full list of i.MX6 UltraLite clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt b/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
new file mode 100644
index 000000000000..52b457c23eed
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
@@ -0,0 +1,83 @@
+Device Tree Clock bindins for CPU DVFS of Mediatek MT8173 SoC
+
+Required properties:
+- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
+- clock-names: Should contain the following:
+ "cpu" - The multiplexer for clock input of CPU cluster.
+ "intermediate" - A parent of "cpu" clock which is used as "intermediate" clock
+ source (usually MAINPLL) when the original CPU PLL is under
+ transition and not stable yet.
+ Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
+ generic clock consumer properties.
+- proc-supply: Regulator for Vproc of CPU cluster.
+
+Optional properties:
+- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
+ needs to do "voltage tracking" to step by step scale up/down Vproc and
+ Vsram to fit SoC specific needs. When absent, the voltage scaling
+ flow is handled by hardware, hence no software "voltage tracking" is
+ needed.
+
+Example:
+--------
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x000>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ clocks = <&infracfg CLK_INFRA_CA53SEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x001>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ clocks = <&infracfg CLK_INFRA_CA53SEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ };
+
+ cpu2: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x100>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ clocks = <&infracfg CLK_INFRA_CA57SEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ };
+
+ cpu3: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x101>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ clocks = <&infracfg CLK_INFRA_CA57SEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ };
+
+ &cpu0 {
+ proc-supply = <&mt6397_vpca15_reg>;
+ };
+
+ &cpu1 {
+ proc-supply = <&mt6397_vpca15_reg>;
+ };
+
+ &cpu2 {
+ proc-supply = <&da9211_vcpu_reg>;
+ sram-supply = <&mt6397_vsramca7_reg>;
+ };
+
+ &cpu3 {
+ proc-supply = <&da9211_vcpu_reg>;
+ sram-supply = <&mt6397_vsramca7_reg>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
new file mode 100644
index 000000000000..ee7e5fd4a50b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
@@ -0,0 +1,79 @@
+NVIDIA Tegra124 DFLL FCPU clocksource
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The DFLL IP block on Tegra is a root clocksource designed for clocking
+the fast CPU cluster. It consists of a free-running voltage controlled
+oscillator connected to the CPU voltage rail (VDD_CPU), and a closed loop
+control module that will automatically adjust the VDD_CPU voltage by
+communicating with an off-chip PMIC either via an I2C bus or via PWM signals.
+Currently only the I2C mode is supported by these bindings.
+
+Required properties:
+- compatible : should be "nvidia,tegra124-dfll"
+- reg : Defines the following set of registers, in the order listed:
+ - registers for the DFLL control logic.
+ - registers for the I2C output logic.
+ - registers for the integrated I2C master controller.
+ - look-up table RAM for voltage register values.
+- interrupts: Should contain the DFLL block interrupt.
+- clocks: Must contain an entry for each entry in clock-names.
+ See clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - soc: Clock source for the DFLL control logic.
+ - ref: The closed loop reference clock
+ - i2c: Clock source for the integrated I2C master.
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - dvco: Reset control for the DFLL DVCO.
+- #clock-cells: Must be 0.
+- clock-output-names: Name of the clock output.
+- vdd-cpu-supply: Regulator for the CPU voltage rail that the DFLL
+ hardware will start controlling. The regulator will be queried for
+ the I2C register, control values and supported voltages.
+
+Required properties for the control loop parameters:
+- nvidia,sample-rate: Sample rate of the DFLL control loop.
+- nvidia,droop-ctrl: See the register CL_DVFS_DROOP_CTRL in the TRM.
+- nvidia,force-mode: See the field DFLL_PARAMS_FORCE_MODE in the TRM.
+- nvidia,cf: Numeric value, see the field DFLL_PARAMS_CF_PARAM in the TRM.
+- nvidia,ci: Numeric value, see the field DFLL_PARAMS_CI_PARAM in the TRM.
+- nvidia,cg: Numeric value, see the field DFLL_PARAMS_CG_PARAM in the TRM.
+
+Optional properties for the control loop parameters:
+- nvidia,cg-scale: Boolean value, see the field DFLL_PARAMS_CG_SCALE in the TRM.
+
+Required properties for I2C mode:
+- nvidia,i2c-fs-rate: I2C transfer rate, if using full speed mode.
+
+Example:
+
+clock@0,70110000 {
+ compatible = "nvidia,tegra124-dfll";
+ reg = <0 0x70110000 0 0x100>, /* DFLL control */
+ <0 0x70110000 0 0x100>, /* I2C output control */
+ <0 0x70110100 0 0x100>, /* Integrated I2C controller */
+ <0 0x70110200 0 0x100>; /* Look-up table RAM */
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_DFLL_SOC>,
+ <&tegra_car TEGRA124_CLK_DFLL_REF>,
+ <&tegra_car TEGRA124_CLK_I2C5>;
+ clock-names = "soc", "ref", "i2c";
+ resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>;
+ reset-names = "dvco";
+ #clock-cells = <0>;
+ clock-output-names = "dfllCPU_out";
+ vdd-cpu-supply = <&vdd_cpu>;
+ status = "okay";
+
+ nvidia,sample-rate = <12500>;
+ nvidia,droop-ctrl = <0x00000f00>;
+ nvidia,force-mode = <1>;
+ nvidia,cf = <10>;
+ nvidia,ci = <0>;
+ nvidia,cg = <2>;
+
+ nvidia,i2c-fs-rate = <400000>;
+};
diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt
index 2f3747fdcf1c..e4cdaf1cb333 100644
--- a/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt
@@ -1,7 +1,9 @@
* Renesas R8A7778 Clock Pulse Generator (CPG)
The CPG generates core clocks for the R8A7778. It includes two PLLs and
-several fixed ratio dividers
+several fixed ratio dividers.
+The CPG also provides a Clock Domain for SoC devices, in combination with the
+CPG Module Stop (MSTP) Clocks.
Required Properties:
@@ -10,10 +12,18 @@ Required Properties:
- #clock-cells: Must be 1
- clock-output-names: The names of the clocks. Supported clocks are
"plla", "pllb", "b", "out", "p", "s", and "s1".
+ - #power-domain-cells: Must be 0
+SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
+through an MSTP clock should refer to the CPG device node in their
+"power-domains" property, as documented by the generic PM domain bindings in
+Documentation/devicetree/bindings/power/power_domain.txt.
-Example
--------
+
+Examples
+--------
+
+ - CPG device node:
cpg_clocks: cpg_clocks@ffc80000 {
compatible = "renesas,r8a7778-cpg-clocks";
@@ -22,4 +32,17 @@ Example
clocks = <&extal_clk>;
clock-output-names = "plla", "pllb", "b",
"out", "p", "s", "s1";
+ #power-domain-cells = <0>;
+ };
+
+
+ - CPG/MSTP Clock Domain member device node:
+
+ sdhi0: sd@ffe4c000 {
+ compatible = "renesas,sdhi-r8a7778";
+ reg = <0xffe4c000 0x100>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7778_CLK_SDHI0>;
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt
index ed3c8cb12f4e..8c81547c29f5 100644
--- a/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt
@@ -1,7 +1,9 @@
* Renesas R8A7779 Clock Pulse Generator (CPG)
The CPG generates core clocks for the R8A7779. It includes one PLL and
-several fixed ratio dividers
+several fixed ratio dividers.
+The CPG also provides a Clock Domain for SoC devices, in combination with the
+CPG Module Stop (MSTP) Clocks.
Required Properties:
@@ -12,16 +14,36 @@ Required Properties:
- #clock-cells: Must be 1
- clock-output-names: The names of the clocks. Supported clocks are "plla",
"z", "zs", "s", "s1", "p", "b", "out".
+ - #power-domain-cells: Must be 0
+SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
+through an MSTP clock should refer to the CPG device node in their
+"power-domains" property, as documented by the generic PM domain bindings in
+Documentation/devicetree/bindings/power/power_domain.txt.
-Example
--------
+
+Examples
+--------
+
+ - CPG device node:
cpg_clocks: cpg_clocks@ffc80000 {
compatible = "renesas,r8a7779-cpg-clocks";
- reg = <0 0xffc80000 0 0x30>;
+ reg = <0xffc80000 0x30>;
clocks = <&extal_clk>;
#clock-cells = <1>;
clock-output-names = "plla", "z", "zs", "s", "s1", "p",
"b", "out";
+ #power-domain-cells = <0>;
+ };
+
+
+ - CPG/MSTP Clock Domain member device node:
+
+ sata: sata@fc600000 {
+ compatible = "renesas,sata-r8a7779", "renesas,rcar-sata";
+ reg = <0xfc600000 0x2000>;
+ interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7779_CLK_SATA>;
+ power-domains = <&cpg_clocks>;
};
diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
index 56f111bd3e45..2a9a8edc8f35 100644
--- a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
@@ -2,6 +2,8 @@
The CPG generates core clocks for the R-Car Gen2 SoCs. It includes three PLLs
and several fixed ratio dividers.
+The CPG also provides a Clock Domain for SoC devices, in combination with the
+CPG Module Stop (MSTP) Clocks.
Required Properties:
@@ -20,10 +22,18 @@ Required Properties:
- clock-output-names: The names of the clocks. Supported clocks are "main",
"pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", "rcan", and
"adsp"
+ - #power-domain-cells: Must be 0
+SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
+through an MSTP clock should refer to the CPG device node in their
+"power-domains" property, as documented by the generic PM domain bindings in
+Documentation/devicetree/bindings/power/power_domain.txt.
-Example
--------
+
+Examples
+--------
+
+ - CPG device node:
cpg_clocks: cpg_clocks@e6150000 {
compatible = "renesas,r8a7790-cpg-clocks",
@@ -34,4 +44,16 @@ Example
clock-output-names = "main", "pll0, "pll1", "pll3",
"lb", "qspi", "sdh", "sd0", "sd1", "z",
"rcan", "adsp";
+ #power-domain-cells = <0>;
+ };
+
+
+ - CPG/MSTP Clock Domain member device node:
+
+ thermal@e61f0000 {
+ compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal";
+ reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
+ interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
+ power-domains = <&cpg_clocks>;
};
diff --git a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt
index b0f7ddb8cdb1..bb51a33a1fbf 100644
--- a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt
@@ -2,6 +2,8 @@
The CPG generates core clocks for the RZ SoCs. It includes the PLL, variable
CPU and GPU clocks, and several fixed ratio dividers.
+The CPG also provides a Clock Domain for SoC devices, in combination with the
+CPG Module Stop (MSTP) Clocks.
Required Properties:
@@ -14,10 +16,18 @@ Required Properties:
- #clock-cells: Must be 1
- clock-output-names: The names of the clocks. Supported clocks are "pll",
"i", and "g"
+ - #power-domain-cells: Must be 0
+SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
+through an MSTP clock should refer to the CPG device node in their
+"power-domains" property, as documented by the generic PM domain bindings in
+Documentation/devicetree/bindings/power/power_domain.txt.
-Example
--------
+
+Examples
+--------
+
+ - CPG device node:
cpg_clocks: cpg_clocks@fcfe0000 {
#clock-cells = <1>;
@@ -26,4 +36,19 @@ Example
reg = <0xfcfe0000 0x18>;
clocks = <&extal_clk>, <&usb_x1_clk>;
clock-output-names = "pll", "i", "g";
+ #power-domain-cells = <0>;
+ };
+
+
+ - CPG/MSTP Clock Domain member device node:
+
+ mtu2: timer@fcff0000 {
+ compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
+ reg = <0xfcff0000 0x400>;
+ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tgi0a";
+ clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
+ clock-names = "fck";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt
new file mode 100644
index 000000000000..7c8bbcfed8d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt
@@ -0,0 +1,61 @@
+* Rockchip RK3368 Clock and Reset Unit
+
+The RK3368 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3368-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing, pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_gmac" - external GMAC clock - optional
+ - "ext_hsadc" - external HSADC clock - optional,
+ - "ext_isp" - external ISP clock - optional,
+ - "ext_jtag" - external JTAG clock - optional
+ - "ext_vip" - external VIP clock - optional,
+ - "usbotg_out" - output clock of the pll in the otg phy
+
+Example: Clock controller node:
+
+ cru: clock-controller@ff760000 {
+ compatible = "rockchip,rk3368-cru";
+ reg = <0x0 0xff760000 0x0 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@10124000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10124000 0x400>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&cru SCLK_UART0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
index efb51cf0c845..d8b168ebd5f1 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
@@ -21,8 +21,8 @@ Required properties:
"st,stih416-plls-c32-ddr", "st,clkgen-plls-c32"
"st,stih407-plls-c32-a0", "st,clkgen-plls-c32"
"st,stih407-plls-c32-a9", "st,clkgen-plls-c32"
- "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32"
- "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32"
+ "sst,plls-c32-cx_0", "st,clkgen-plls-c32"
+ "sst,plls-c32-cx_1", "st,clkgen-plls-c32"
"st,stih415-gpu-pll-c32", "st,clkgengpu-pll-c32"
"st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32"
diff --git a/Documentation/devicetree/bindings/clock/ux500.txt b/Documentation/devicetree/bindings/clock/ux500.txt
new file mode 100644
index 000000000000..e52bd4b72348
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ux500.txt
@@ -0,0 +1,64 @@
+Clock bindings for ST-Ericsson Ux500 clocks
+
+Required properties :
+- compatible : shall contain only one of the following:
+ "stericsson,u8500-clks"
+ "stericsson,u8540-clks"
+ "stericsson,u9540-clks"
+- reg : shall contain base register location and length for
+ CLKRST1, 2, 3, 5, and 6 in an array. Note the absence of
+ CLKRST4, which does not exist.
+
+Required subnodes:
+- prcmu-clock: a subnode with one clock cell for PRCMU (power,
+ reset, control unit) clocks. The cell indicates which PRCMU
+ clock in the prcmu-clock node the consumer wants to use.
+- prcc-periph-clock: a subnode with two clock cells for
+ PRCC (programmable reset- and clock controller) peripheral clocks.
+ The first cell indicates which PRCC block the consumer
+ wants to use, possible values are 1, 2, 3, 5, 6. The second
+ cell indicates which clock inside the PRCC block it wants,
+ possible values are 0 thru 31.
+- prcc-kernel-clock: a subnode with two clock cells for
+ PRCC (programmable reset- and clock controller) kernel clocks
+ The first cell indicates which PRCC block the consumer
+ wants to use, possible values are 1, 2, 3, 5, 6. The second
+ cell indicates which clock inside the PRCC block it wants,
+ possible values are 0 thru 31.
+- rtc32k-clock: a subnode with zero clock cells for the 32kHz
+ RTC clock.
+- smp-twd-clock: a subnode for the ARM SMP Timer Watchdog cluster
+ with zero clock cells.
+
+Example:
+
+clocks {
+ compatible = "stericsson,u8500-clks";
+ /*
+ * Registers for the CLKRST block on peripheral
+ * groups 1, 2, 3, 5, 6,
+ */
+ reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
+ <0x8000f000 0x1000>, <0xa03ff000 0x1000>,
+ <0xa03cf000 0x1000>;
+
+ prcmu_clk: prcmu-clock {
+ #clock-cells = <1>;
+ };
+
+ prcc_pclk: prcc-periph-clock {
+ #clock-cells = <2>;
+ };
+
+ prcc_kclk: prcc-kernel-clock {
+ #clock-cells = <2>;
+ };
+
+ rtc_clk: rtc32k-clock {
+ #clock-cells = <0>;
+ };
+
+ smp_twd_clk: smp-twd-clock {
+ #clock-cells = <0>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/cpufreq/tegra124-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/tegra124-cpufreq.txt
new file mode 100644
index 000000000000..b1669fbfb740
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/tegra124-cpufreq.txt
@@ -0,0 +1,44 @@
+Tegra124 CPU frequency scaling driver bindings
+----------------------------------------------
+
+Both required and optional properties listed below must be defined
+under node /cpus/cpu@0.
+
+Required properties:
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - cpu_g: Clock mux for the fast CPU cluster.
+ - cpu_lp: Clock mux for the low-power CPU cluster.
+ - pll_x: Fast PLL clocksource.
+ - pll_p: Auxiliary PLL used during fast PLL rate changes.
+ - dfll: Fast DFLL clocksource that also automatically scales CPU voltage.
+- vdd-cpu-supply: Regulator for CPU voltage
+
+Optional properties:
+- clock-latency: Specify the possible maximum transition latency for clock,
+ in unit of nanoseconds.
+
+Example:
+--------
+cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+
+ clocks = <&tegra_car TEGRA124_CLK_CCLK_G>,
+ <&tegra_car TEGRA124_CLK_CCLK_LP>,
+ <&tegra_car TEGRA124_CLK_PLL_X>,
+ <&tegra_car TEGRA124_CLK_PLL_P>,
+ <&dfll>;
+ clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll";
+ clock-latency = <300000>;
+ vdd-cpu-supply: <&vdd_cpu>;
+ };
+
+ <...>
+};
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
index e4022776ac6e..6831d025ec24 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
@@ -106,6 +106,18 @@ PROPERTIES
to the interrupt parent to which the child domain
is being mapped.
+ - clocks
+ Usage: required if SEC 4.0 requires explicit enablement of clocks
+ Value type: <prop_encoded-array>
+ Definition: A list of phandle and clock specifier pairs describing
+ the clocks required for enabling and disabling SEC 4.0.
+
+ - clock-names
+ Usage: required if SEC 4.0 requires explicit enablement of clocks
+ Value type: <string>
+ Definition: A list of clock name strings in the same order as the
+ clocks property.
+
Note: All other standard properties (see the ePAPR) are allowed
but are optional.
@@ -120,6 +132,11 @@ EXAMPLE
ranges = <0 0x300000 0x10000>;
interrupt-parent = <&mpic>;
interrupts = <92 2>;
+ clocks = <&clks IMX6QDL_CLK_CAAM_MEM>,
+ <&clks IMX6QDL_CLK_CAAM_ACLK>,
+ <&clks IMX6QDL_CLK_CAAM_IPG>,
+ <&clks IMX6QDL_CLK_EIM_SLOW>;
+ clock-names = "mem", "aclk", "ipg", "emi_slow";
};
=====================================================================
@@ -288,12 +305,13 @@ Secure Non-Volatile Storage (SNVS) Node
Node defines address range and the associated
interrupt for the SNVS function. This function
monitors security state information & reports
- security violations.
+ security violations. This also included rtc,
+ system power off and ON/OFF key.
- compatible
Usage: required
Value type: <string>
- Definition: Must include "fsl,sec-v4.0-mon".
+ Definition: Must include "fsl,sec-v4.0-mon" and "syscon".
- reg
Usage: required
@@ -324,7 +342,7 @@ Secure Non-Volatile Storage (SNVS) Node
the child address, parent address, & length.
- interrupts
- Usage: required
+ Usage: optional
Value type: <prop_encoded-array>
Definition: Specifies the interrupts generated by this
device. The value of the interrupts property
@@ -341,7 +359,7 @@ Secure Non-Volatile Storage (SNVS) Node
EXAMPLE
sec_mon@314000 {
- compatible = "fsl,sec-v4.0-mon";
+ compatible = "fsl,sec-v4.0-mon", "syscon";
reg = <0x314000 0x1000>;
ranges = <0 0x314000 0x1000>;
interrupt-parent = <&mpic>;
@@ -358,16 +376,72 @@ Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node
Value type: <string>
Definition: Must include "fsl,sec-v4.0-mon-rtc-lp".
- - reg
+ - interrupts
Usage: required
- Value type: <prop-encoded-array>
- Definition: A standard property. Specifies the physical
- address and length of the SNVS LP configuration registers.
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by this
+ device. The value of the interrupts property
+ consists of one interrupt specifier. The format
+ of the specifier is defined by the binding document
+ describing the node's interrupt parent.
+
+ - regmap
+ Usage: required
+ Value type: <phandle>
+ Definition: this is phandle to the register map node.
+
+ - offset
+ Usage: option
+ value type: <u32>
+ Definition: LP register offset. default it is 0x34.
EXAMPLE
- sec_mon_rtc_lp@314000 {
+ sec_mon_rtc_lp@1 {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
+ interrupts = <93 2>;
+ regmap = <&snvs>;
+ offset = <0x34>;
+ };
+
+=====================================================================
+System ON/OFF key driver
+
+ The snvs-pwrkey is designed to enable POWER key function which controlled
+ by SNVS ONOFF, the driver can report the status of POWER key and wakeup
+ system if pressed after system suspend.
+
+ - compatible:
+ Usage: required
+ Value type: <string>
+ Definition: Mush include "fsl,sec-v4.0-pwrkey".
+
+ - interrupts:
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: The SNVS ON/OFF interrupt number to the CPU(s).
+
+ - linux,keycode:
+ Usage: option
+ Value type: <int>
+ Definition: Keycode to emit, KEY_POWER by default.
+
+ - wakeup-source:
+ Usage: option
+ Value type: <boo>
+ Definition: Button can wake-up the system.
+
+ - regmap:
+ Usage: required:
+ Value type: <phandle>
+ Definition: this is phandle to the register map node.
+
+EXAMPLE:
+ snvs-pwrkey@0x020cc000 {
+ compatible = "fsl,sec-v4.0-pwrkey";
+ regmap = <&snvs>;
+ interrupts = <0 4 0x4>
+ linux,keycode = <116>; /* KEY_POWER */
+ wakeup;
};
=====================================================================
@@ -443,12 +517,20 @@ FULL EXAMPLE
compatible = "fsl,sec-v4.0-mon";
reg = <0x314000 0x1000>;
ranges = <0 0x314000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <93 2>;
sec_mon_rtc_lp@34 {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
+ regmap = <&sec_mon>;
+ offset = <0x34>;
+ interrupts = <93 2>;
+ };
+
+ snvs-pwrkey@0x020cc000 {
+ compatible = "fsl,sec-v4.0-pwrkey";
+ regmap = <&sec_mon>;
+ interrupts = <0 4 0x4>;
+ linux,keycode = <116>; /* KEY_POWER */
+ wakeup;
};
};
diff --git a/Documentation/devicetree/bindings/crypto/sun4i-ss.txt b/Documentation/devicetree/bindings/crypto/sun4i-ss.txt
new file mode 100644
index 000000000000..5d38e9b7033f
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/sun4i-ss.txt
@@ -0,0 +1,23 @@
+* Allwinner Security System found on A20 SoC
+
+Required properties:
+- compatible : Should be "allwinner,sun4i-a10-crypto".
+- reg: Should contain the Security System register location and length.
+- interrupts: Should contain the IRQ line for the Security System.
+- clocks : List of clock specifiers, corresponding to ahb and ss.
+- clock-names : Name of the functional clock, should be
+ * "ahb" : AHB gating clock
+ * "mod" : SS controller clock
+
+Optional properties:
+ - resets : phandle + reset specifier pair
+ - reset-names : must contain "ahb"
+
+Example:
+ crypto: crypto-engine@01c15000 {
+ compatible = "allwinner,sun4i-a10-crypto";
+ reg = <0x01c15000 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ahb_gates 5>, <&ss_clk>;
+ clock-names = "ahb", "mod";
+ };
diff --git a/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt b/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
index b54bf3a2ff57..3e36c1d11386 100644
--- a/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
+++ b/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
@@ -11,15 +11,14 @@ to various devfreq devices. The devfreq devices would use the event data when
derterming the current state of each IP.
Required properties:
-- compatible: Should be "samsung,exynos-ppmu".
+- compatible: Should be "samsung,exynos-ppmu" or "samsung,exynos-ppmu-v2.
- reg: physical base address of each PPMU and length of memory mapped region.
Optional properties:
- clock-names : the name of clock used by the PPMU, "ppmu"
- clocks : phandles for clock specified in "clock-names" property
-- #clock-cells: should be 1.
-Example1 : PPMU nodes in exynos3250.dtsi are listed below.
+Example1 : PPMUv1 nodes in exynos3250.dtsi are listed below.
ppmu_dmc0: ppmu_dmc0@106a0000 {
compatible = "samsung,exynos-ppmu";
@@ -108,3 +107,41 @@ Example2 : Events of each PPMU node in exynos3250-rinato.dts are listed below.
};
};
};
+
+Example3 : PPMUv2 nodes in exynos5433.dtsi are listed below.
+
+ ppmu_d0_cpu: ppmu_d0_cpu@10480000 {
+ compatible = "samsung,exynos-ppmu-v2";
+ reg = <0x10480000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_d0_general: ppmu_d0_general@10490000 {
+ compatible = "samsung,exynos-ppmu-v2";
+ reg = <0x10490000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_d0_rt: ppmu_d0_rt@104a0000 {
+ compatible = "samsung,exynos-ppmu-v2";
+ reg = <0x104a0000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_d1_cpu: ppmu_d1_cpu@104b0000 {
+ compatible = "samsung,exynos-ppmu-v2";
+ reg = <0x104b0000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_d1_general: ppmu_d1_general@104c0000 {
+ compatible = "samsung,exynos-ppmu-v2";
+ reg = <0x104c0000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_d1_rt: ppmu_d1_rt@104d0000 {
+ compatible = "samsung,exynos-ppmu-v2";
+ reg = <0x104d0000 0x2000>;
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt
index 45414bbcd945..f61d5af44a27 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt
+++ b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt
@@ -10,8 +10,11 @@ Required Properties:
Optional Properties:
- ti,wakeup : To enable the wakeup comparator in probe
- - ti,enable-id-detection: Perform ID detection.
+ - ti,enable-id-detection: Perform ID detection. If id-gpio is specified
+ it performs id-detection using GPIO else using OTG core.
- ti,enable-vbus-detection: Perform VBUS detection.
+ - id-gpio: gpio for GPIO ID detection. See gpio binding.
+ - debounce-delay-ms: debounce delay for GPIO ID pin in milliseconds.
palmas-usb {
compatible = "ti,twl6035-usb", "ti,palmas-usb";
diff --git a/Documentation/devicetree/bindings/hwmon/lm70.txt b/Documentation/devicetree/bindings/hwmon/lm70.txt
new file mode 100644
index 000000000000..e7fd921aa4f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lm70.txt
@@ -0,0 +1,21 @@
+* LM70/TMP121/LM71/LM74 thermometer.
+
+Required properties:
+- compatible: one of
+ "ti,lm70"
+ "ti,tmp121"
+ "ti,lm71"
+ "ti,lm74"
+
+See Documentation/devicetree/bindings/spi/spi-bus.txt for more required and
+optional properties.
+
+Example:
+
+spi_master {
+ temperature-sensor@0 {
+ compatible = "ti,lm70";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
index ed2f09dc2483..a7afbf60bb9c 100644
--- a/Documentation/devicetree/bindings/hwmon/ltc2978.txt
+++ b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
@@ -3,10 +3,16 @@ ltc2978
Required properties:
- compatible: should contain one of:
* "lltc,ltc2974"
+ * "lltc,ltc2975"
* "lltc,ltc2977"
* "lltc,ltc2978"
+ * "lltc,ltc2980"
* "lltc,ltc3880"
+ * "lltc,ltc3882"
* "lltc,ltc3883"
+ * "lltc,ltc3886"
+ * "lltc,ltc3887"
+ * "lltc,ltm2987"
* "lltc,ltm4676"
- reg: I2C slave address
@@ -17,10 +23,10 @@ Optional properties:
standard binding for regulators; see regulator.txt.
Valid names of regulators depend on number of supplies supported per device:
- * ltc2974 : vout0 - vout3
- * ltc2977 : vout0 - vout7
+ * ltc2974, ltc2975 : vout0 - vout3
+ * ltc2977, ltc2980, ltm2987 : vout0 - vout7
* ltc2978 : vout0 - vout7
- * ltc3880 : vout0 - vout1
+ * ltc3880, ltc3882, ltc3886 : vout0 - vout1
* ltc3883 : vout0
* ltm4676 : vout0 - vout1
diff --git a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt
index b85184391b78..2a1f3af30155 100644
--- a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt
+++ b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt
@@ -18,6 +18,7 @@ Required properties:
"mcp3202"
"mcp3204"
"mcp3208"
+ "mcp3301"
Examples:
diff --git a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt
index 3eb40e20c143..1aad0514e647 100644
--- a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt
@@ -17,6 +17,11 @@ Recommended properties:
- Frequency in normal mode (ADLPC=0, ADHSC=0)
- Frequency in high-speed mode (ADLPC=0, ADHSC=1)
- Frequency in low-power mode (ADLPC=1, ADHSC=0)
+- min-sample-time: Minimum sampling time in nanoseconds. This value has
+ to be chosen according to the conversion mode and the connected analog
+ source resistance (R_as) and capacitance (C_as). Refer the datasheet's
+ operating requirements. A safe default across a wide range of R_as and
+ C_as as well as conversion modes is 1000ns.
Example:
adc0: adc@4003b000 {
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/mmc35240.txt b/Documentation/devicetree/bindings/iio/magnetometer/mmc35240.txt
new file mode 100644
index 000000000000..a01235c7fa15
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/mmc35240.txt
@@ -0,0 +1,13 @@
+* MEMSIC MMC35240 magnetometer sensor
+
+Required properties:
+
+ - compatible : should be "memsic,mmc35240"
+ - reg : the I2C address of the magnetometer
+
+Example:
+
+mmc35240@30 {
+ compatible = "memsic,mmc35240";
+ reg = <0x30>;
+};
diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt
index 8a6be3bdf267..d3ccdb190c53 100644
--- a/Documentation/devicetree/bindings/iio/st-sensors.txt
+++ b/Documentation/devicetree/bindings/iio/st-sensors.txt
@@ -35,6 +35,7 @@ Accelerometers:
- st,lsm303dl-accel
- st,lsm303dlm-accel
- st,lsm330-accel
+- st,lsm303agr-accel
Gyroscopes:
- st,l3g4200d-gyro
@@ -46,6 +47,7 @@ Gyroscopes:
- st,lsm330-gyro
Magnetometers:
+- st,lsm303agr-magn
- st,lsm303dlh-magn
- st,lsm303dlhc-magn
- st,lsm303dlm-magn
diff --git a/Documentation/devicetree/bindings/input/snvs-pwrkey.txt b/Documentation/devicetree/bindings/input/snvs-pwrkey.txt
new file mode 100644
index 000000000000..70c14250323b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/snvs-pwrkey.txt
@@ -0,0 +1 @@
+See Documentation/devicetree/bindings/crypto/fsl-sec4.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
index 7da578d72123..2d6c8bb4d827 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
@@ -5,9 +5,14 @@ The BCM2835 contains a custom top-level interrupt controller, which supports
controller, or the HW block containing it, is referred to occasionally
as "armctrl" in the SoC documentation, hence naming of this binding.
+The BCM2836 contains the same interrupt controller with the same
+interrupts, but the per-CPU interrupt controller is the root, and an
+interrupt there indicates that the ARMCTRL has an interrupt to handle.
+
Required properties:
-- compatible : should be "brcm,bcm2835-armctrl-ic"
+- compatible : should be "brcm,bcm2835-armctrl-ic" or
+ "brcm,bcm2836-armctrl-ic"
- reg : Specifies base physical address and size of the registers.
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode an
@@ -20,6 +25,12 @@ Required properties:
The 2nd cell contains the interrupt number within the bank. Valid values
are 0..7 for bank 0, and 0..31 for bank 1.
+Additional required properties for brcm,bcm2836-armctrl-ic:
+- interrupt-parent : Specifies the parent interrupt controller when this
+ controller is the second level.
+- interrupts : Specifies the interrupt on the parent for this interrupt
+ controller to handle.
+
The interrupt sources are as follows:
Bank 0:
@@ -102,9 +113,21 @@ Bank 2:
Example:
+/* BCM2835, first level */
intc: interrupt-controller {
compatible = "brcm,bcm2835-armctrl-ic";
reg = <0x7e00b200 0x200>;
interrupt-controller;
#interrupt-cells = <2>;
};
+
+/* BCM2836, second level */
+intc: interrupt-controller {
+ compatible = "brcm,bcm2836-armctrl-ic";
+ reg = <0x7e00b200 0x200>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&local_intc>;
+ interrupts = <8>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
new file mode 100644
index 000000000000..f320dcd6e69b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
@@ -0,0 +1,37 @@
+BCM2836 per-CPU interrupt controller
+
+The BCM2836 has a per-cpu interrupt controller for the timer, PMU
+events, and SMP IPIs. One of the CPUs may receive interrupts for the
+peripheral (GPU) events, which chain to the BCM2835-style interrupt
+controller.
+
+Required properties:
+
+- compatible: Should be "brcm,bcm2836-l1-intc"
+- reg: Specifies base physical address and size of the
+ registers
+- interrupt-controller: Identifies the node as an interrupt controller
+- #interrupt-cells: Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+The interrupt sources are as follows:
+
+0: CNTPSIRQ
+1: CNTPNSIRQ
+2: CNTHPIRQ
+3: CNTVIRQ
+8: GPU_FAST
+9: PMU_FAST
+
+Example:
+
+local_intc: local_intc {
+ compatible = "brcm,bcm2836-l1-intc";
+ reg = <0x40000000 0x100>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&local_intc>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/msi.txt b/Documentation/devicetree/bindings/interrupt-controller/msi.txt
new file mode 100644
index 000000000000..c60c034dcf19
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/msi.txt
@@ -0,0 +1,135 @@
+This document describes the generic device tree binding for MSI controllers and
+their master(s).
+
+Message Signaled Interrupts (MSIs) are a class of interrupts generated by a
+write to an MMIO address.
+
+MSIs were originally specified by PCI (and are used with PCIe), but may also be
+used with other busses, and hence a mechanism is required to relate devices on
+those busses to the MSI controllers which they are capable of using,
+potentially including additional information.
+
+MSIs are distinguished by some combination of:
+
+- The doorbell (the MMIO address written to).
+
+ Devices may be configured by software to write to arbitrary doorbells which
+ they can address. An MSI controller may feature a number of doorbells.
+
+- The payload (the value written to the doorbell).
+
+ Devices may be configured to write an arbitrary payload chosen by software.
+ MSI controllers may have restrictions on permitted payloads.
+
+- Sideband information accompanying the write.
+
+ Typically this is neither configurable nor probeable, and depends on the path
+ taken through the memory system (i.e. it is a property of the combination of
+ MSI controller and device rather than a property of either in isolation).
+
+
+MSI controllers:
+================
+
+An MSI controller signals interrupts to a CPU when a write is made to an MMIO
+address by some master. An MSI controller may feature a number of doorbells.
+
+Required properties:
+--------------------
+
+- msi-controller: Identifies the node as an MSI controller.
+
+Optional properties:
+--------------------
+
+- #msi-cells: The number of cells in an msi-specifier, required if not zero.
+
+ Typically this will encode information related to sideband data, and will
+ not encode doorbells or payloads as these can be configured dynamically.
+
+ The meaning of the msi-specifier is defined by the device tree binding of
+ the specific MSI controller.
+
+
+MSI clients
+===========
+
+MSI clients are devices which generate MSIs. For each MSI they wish to
+generate, the doorbell and payload may be configured, though sideband
+information may not be configurable.
+
+Required properties:
+--------------------
+
+- msi-parent: A list of phandle + msi-specifier pairs, one for each MSI
+ controller which the device is capable of using.
+
+ This property is unordered, and MSIs may be allocated from any combination of
+ MSI controllers listed in the msi-parent property.
+
+ If a device has restrictions on the allocation of MSIs, these restrictions
+ must be described with additional properties.
+
+ When #msi-cells is non-zero, busses with an msi-parent will require
+ additional properties to describe the relationship between devices on the bus
+ and the set of MSIs they can potentially generate.
+
+
+Example
+=======
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ msi_a: msi-controller@a {
+ reg = <0xa 0xf00>;
+ compatible = "vendor-a,some-controller";
+ msi-controller;
+ /* No sideband data, so #msi-cells omitted */
+ };
+
+ msi_b: msi-controller@b {
+ reg = <0xb 0xf00>;
+ compatible = "vendor-b,another-controller";
+ msi-controller;
+ /* Each device has some unique ID */
+ #msi-cells = <1>;
+ };
+
+ msi_c: msi-controller@c {
+ reg = <0xb 0xf00>;
+ compatible = "vendor-b,another-controller";
+ msi-controller;
+ /* Each device has some unique ID */
+ #msi-cells = <1>;
+ };
+
+ dev@0 {
+ reg = <0x0 0xf00>;
+ compatible = "vendor-c,some-device";
+
+ /* Can only generate MSIs to msi_a */
+ msi-parent = <&msi_a>;
+ };
+
+ dev@1 {
+ reg = <0x1 0xf00>;
+ compatible = "vendor-c,some-device";
+
+ /*
+ * Can generate MSIs to either A or B.
+ */
+ msi-parent = <&msi_a>, <&msi_b 0x17>;
+ };
+
+ dev@2 {
+ reg = <0x2 0xf00>;
+ compatible = "vendor-c,some-device";
+ /*
+ * Has different IDs at each MSI controller.
+ * Can generate MSIs to all of the MSI controllers.
+ */
+ msi-parent = <&msi_a>, <&msi_b 0x17>, <&msi_c 0x53>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
index 747c53805eec..68419843e32f 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -29,14 +29,23 @@ Optional properties for child nodes:
"ide-disk" - LED indicates disk activity
"timer" - LED flashes at a fixed, configurable rate
-- max-microamp : maximum intensity in microamperes of the LED
- (torch LED for flash devices)
-- flash-max-microamp : maximum intensity in microamperes of the
- flash LED; it is mandatory if the LED should
- support the flash mode
-- flash-timeout-us : timeout in microseconds after which the flash
- LED is turned off
+- led-max-microamp : Maximum LED supply current in microamperes. This property
+ can be made mandatory for the board configurations
+ introducing a risk of hardware damage in case an excessive
+ current is set.
+ For flash LED controllers with configurable current this
+ property is mandatory for the LEDs in the non-flash modes
+ (e.g. torch or indicator).
+Required properties for flash LED child nodes:
+- flash-max-microamp : Maximum flash LED supply current in microamperes.
+- flash-max-timeout-us : Maximum timeout in microseconds after which the flash
+ LED is turned off.
+
+For controllers that have no configurable current the flash-max-microamp
+property can be omitted.
+For controllers that have no configurable timeout the flash-max-timeout-us
+property can be omitted.
Examples:
@@ -49,7 +58,7 @@ system-status {
camera-flash {
label = "Flash";
led-sources = <0>, <1>;
- max-microamp = <50000>;
+ led-max-microamp = <50000>;
flash-max-microamp = <320000>;
- flash-timeout-us = <500000>;
+ flash-max-timeout-us = <500000>;
};
diff --git a/Documentation/devicetree/bindings/leds/leds-ns2.txt b/Documentation/devicetree/bindings/leds/leds-ns2.txt
index aef3aca34d2d..9f81258a5b6e 100644
--- a/Documentation/devicetree/bindings/leds/leds-ns2.txt
+++ b/Documentation/devicetree/bindings/leds/leds-ns2.txt
@@ -8,6 +8,9 @@ Each LED is represented as a sub-node of the ns2-leds device.
Required sub-node properties:
- cmd-gpio: Command LED GPIO. See OF device-tree GPIO specification.
- slow-gpio: Slow LED GPIO. See OF device-tree GPIO specification.
+- modes-map: A mapping between LED modes (off, on or SATA activity blinking) and
+ the corresponding cmd-gpio/slow-gpio values. All the GPIO values combinations
+ should be given in order to avoid having an unknown mode at driver probe time.
Optional sub-node properties:
- label: Name for this LED. If omitted, the label is taken from the node name.
@@ -15,6 +18,8 @@ Optional sub-node properties:
Example:
+#include <dt-bindings/leds/leds-ns2.h>
+
ns2-leds {
compatible = "lacie,ns2-leds";
@@ -22,5 +27,9 @@ ns2-leds {
label = "ns2:blue:sata";
slow-gpio = <&gpio0 29 0>;
cmd-gpio = <&gpio0 30 0>;
+ modes-map = <NS_V2_LED_OFF 0 1
+ NS_V2_LED_ON 1 0
+ NS_V2_LED_ON 0 0
+ NS_V2_LED_SATA 1 1>;
};
};
diff --git a/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt b/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt
new file mode 100644
index 000000000000..e6df32f9986d
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt
@@ -0,0 +1,125 @@
+* Device tree bindings for ARM PL172 MultiPort Memory Controller
+
+Required properties:
+
+- compatible: "arm,pl172", "arm,primecell"
+
+- reg: Must contains offset/length value for controller.
+
+- #address-cells: Must be 2. The partition number has to be encoded in the
+ first address cell and it may accept values 0..N-1
+ (N - total number of partitions). The second cell is the
+ offset into the partition.
+
+- #size-cells: Must be set to 1.
+
+- ranges: Must contain one or more chip select memory regions.
+
+- clocks: Must contain references to controller clocks.
+
+- clock-names: Must contain "mpmcclk" and "apb_pclk".
+
+- clock-ranges: Empty property indicating that child nodes can inherit
+ named clocks. Required only if clock tree data present
+ in device tree.
+ See clock-bindings.txt
+
+Child chip-select (cs) nodes contain the memory devices nodes connected to
+such as NOR (e.g. cfi-flash) and NAND.
+
+Required child cs node properties:
+
+- #address-cells: Must be 2.
+
+- #size-cells: Must be 1.
+
+- ranges: Empty property indicating that child nodes can inherit
+ memory layout.
+
+- clock-ranges: Empty property indicating that child nodes can inherit
+ named clocks. Required only if clock tree data present
+ in device tree.
+
+- mpmc,cs: Chip select number. Indicates to the pl0172 driver
+ which chipselect is used for accessing the memory.
+
+- mpmc,memory-width: Width of the chip select memory. Must be equal to
+ either 8, 16 or 32.
+
+Optional child cs node config properties:
+
+- mpmc,async-page-mode: Enable asynchronous page mode.
+
+- mpmc,cs-active-high: Set chip select polarity to active high.
+
+- mpmc,byte-lane-low: Set byte lane state to low.
+
+- mpmc,extended-wait: Enable extended wait.
+
+- mpmc,buffer-enable: Enable write buffer.
+
+- mpmc,write-protect: Enable write protect.
+
+Optional child cs node timing properties:
+
+- mpmc,write-enable-delay: Delay from chip select assertion to write
+ enable (WE signal) in nano seconds.
+
+- mpmc,output-enable-delay: Delay from chip select assertion to output
+ enable (OE signal) in nano seconds.
+
+- mpmc,write-access-delay: Delay from chip select assertion to write
+ access in nano seconds.
+
+- mpmc,read-access-delay: Delay from chip select assertion to read
+ access in nano seconds.
+
+- mpmc,page-mode-read-delay: Delay for asynchronous page mode sequential
+ accesses in nano seconds.
+
+- mpmc,turn-round-delay: Delay between access to memory banks in nano
+ seconds.
+
+If any of the above timing parameters are absent, current parameter value will
+be taken from the corresponding HW reg.
+
+Example for pl172 with nor flash on chip select 0 shown below.
+
+emc: memory-controller@40005000 {
+ compatible = "arm,pl172", "arm,primecell";
+ reg = <0x40005000 0x1000>;
+ clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>;
+ clock-names = "mpmcclk", "apb_pclk";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1c000000 0x1000000
+ 1 0 0x1d000000 0x1000000
+ 2 0 0x1e000000 0x1000000
+ 3 0 0x1f000000 0x1000000>;
+
+ cs0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ mpmc,cs = <0>;
+ mpmc,memory-width = <16>;
+ mpmc,byte-lane-low;
+ mpmc,write-enable-delay = <0>;
+ mpmc,output-enable-delay = <0>;
+ mpmc,read-enable-delay = <70>;
+ mpmc,page-mode-read-delay = <70>;
+
+ flash@0,0 {
+ compatible = "sst,sst39vf320", "cfi-flash";
+ reg = <0 0 0x400000>;
+ bank-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "data";
+ reg = <0 0x400000>;
+ };
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt
index f9c6454146b6..a43d26d41e04 100644
--- a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt
@@ -1,5 +1,9 @@
Binding for Synopsys IntelliDDR Multi Protocol Memory Controller
+This controller has an optional ECC support in half-bus width (16-bit)
+configuration. The ECC controller corrects one bit error and detects
+two bit errors.
+
Required properties:
- compatible: Should be 'xlnx,zynq-ddrc-a05'
- reg: Base address and size of the controllers memory area
diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
index 9e6e2592e5c8..4ca6aab4273a 100644
--- a/Documentation/devicetree/bindings/mfd/rk808.txt
+++ b/Documentation/devicetree/bindings/mfd/rk808.txt
@@ -24,6 +24,10 @@ Optional properties:
- vcc10-supply: The input supply for LDO_REG6
- vcc11-supply: The input supply for LDO_REG8
- vcc12-supply: The input supply for SWITCH_REG2
+- dvs-gpios: buck1/2 can be controlled by gpio dvs, this is GPIO specifiers
+ for 2 host gpio's used for dvs. The format of the gpio specifier depends in
+ the gpio controller. If DVS GPIOs aren't present, voltage changes will happen
+ very quickly with no slow ramp time.
Regulators: All the regulators of RK808 to be instantiated shall be
listed in a child node named 'regulators'. Each regulator is represented
@@ -55,7 +59,9 @@ Example:
interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&pmic_int>;
+ pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>;
+ dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
+ <&gpio7 15 GPIO_ACTIVE_HIGH>;
reg = <0x1b>;
rockchip,system-power-controller;
wakeup-source;
diff --git a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
index 4461dc71cb10..862aa2f8837a 100644
--- a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
@@ -1,7 +1,8 @@
* Freescale Quad Serial Peripheral Interface(QuadSPI)
Required properties:
- - compatible : Should be "fsl,vf610-qspi" or "fsl,imx6sx-qspi"
+ - compatible : Should be "fsl,vf610-qspi", "fsl,imx6sx-qspi",
+ "fsl,imx7d-qspi", "fsl,imx6ul-qspi"
- reg : the first contains the register location and length,
the second contains the memory mapping address and length
- reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"
diff --git a/Documentation/devicetree/bindings/mtd/nxp-spifi.txt b/Documentation/devicetree/bindings/mtd/nxp-spifi.txt
new file mode 100644
index 000000000000..f8b6b250654e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/nxp-spifi.txt
@@ -0,0 +1,58 @@
+* NXP SPI Flash Interface (SPIFI)
+
+NXP SPIFI is a specialized SPI interface for serial Flash devices.
+It supports one Flash device with 1-, 2- and 4-bits width in SPI
+mode 0 or 3. The controller operates in either command or memory
+mode. In memory mode the Flash is accessible from the CPU as
+normal memory.
+
+Required properties:
+ - compatible : Should be "nxp,lpc1773-spifi"
+ - reg : the first contains the register location and length,
+ the second contains the memory mapping address and length
+ - reg-names: Should contain the reg names "spifi" and "flash"
+ - interrupts : Should contain the interrupt for the device
+ - clocks : The clocks needed by the SPIFI controller
+ - clock-names : Should contain the clock names "spifi" and "reg"
+
+Optional properties:
+ - resets : phandle + reset specifier
+
+The SPI Flash must be a child of the SPIFI node and must have a
+compatible property as specified in bindings/mtd/jedec,spi-nor.txt
+
+Optionally it can also contain the following properties.
+ - spi-cpol : Controller only supports mode 0 and 3 so either
+ both spi-cpol and spi-cpha should be present or
+ none of them
+ - spi-cpha : See above
+ - spi-rx-bus-width : Used to select how many pins that are used
+ for input on the controller
+
+See bindings/spi/spi-bus.txt for more information.
+
+Example:
+spifi: spifi@40003000 {
+ compatible = "nxp,lpc1773-spifi";
+ reg = <0x40003000 0x1000>, <0x14000000 0x4000000>;
+ reg-names = "spifi", "flash";
+ interrupts = <30>;
+ clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>;
+ clock-names = "spifi", "reg";
+ resets = <&rgu 53>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-cpol;
+ spi-cpha;
+ spi-rx-bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "data";
+ reg = <0 0x200000>;
+ };
+ };
+};
+
diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
index 4f833e3c4f51..d9b655f11048 100644
--- a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
@@ -11,6 +11,7 @@ Required properties:
Optional properties:
+ - dmas: dma data channel, see dma.txt binding doc
- marvell,nand-enable-arbiter: Set to enable the bus arbiter
- marvell,nand-keep-config: Set to keep the NAND controller config as set
by the bootloader
@@ -32,6 +33,8 @@ Example:
compatible = "marvell,pxa3xx-nand";
reg = <0x43100000 90>;
interrupts = <45>;
+ dmas = <&pdma 97 0>;
+ dma-names = "data";
#address-cells = <1>;
marvell,nand-enable-arbiter;
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index 33fe8462edf4..a9df21aaa154 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -2,7 +2,11 @@ TI SoC Ethernet Switch Controller Device Tree Bindings
------------------------------------------------------
Required properties:
-- compatible : Should be "ti,cpsw"
+- compatible : Should be one of the below:-
+ "ti,cpsw" for backward compatible
+ "ti,am335x-cpsw" for AM335x controllers
+ "ti,am4372-cpsw" for AM437x controllers
+ "ti,dra7-cpsw" for DRA7x controllers
- reg : physical base address and size of the cpsw
registers map
- interrupts : property with a value describing the interrupt
diff --git a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
index fabdf64a5737..d543ed3f5363 100644
--- a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt
+++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
@@ -4,6 +4,10 @@ Required properties:
- compatible: "allwinner,sun4i-a10-sid" or "allwinner,sun7i-a20-sid"
- reg: Should contain registers location and length
+= Data cells =
+Are child nodes of qfprom, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
Example for sun4i:
sid@01c23800 {
compatible = "allwinner,sun4i-a10-sid";
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.txt b/Documentation/devicetree/bindings/nvmem/nvmem.txt
new file mode 100644
index 000000000000..b52bc11e9597
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/nvmem.txt
@@ -0,0 +1,80 @@
+= NVMEM(Non Volatile Memory) Data Device Tree Bindings =
+
+This binding is intended to represent the location of hardware
+configuration data stored in NVMEMs like eeprom, efuses and so on.
+
+On a significant proportion of boards, the manufacturer has stored
+some data on NVMEM, for the OS to be able to retrieve these information
+and act upon it. Obviously, the OS has to know about where to retrieve
+these data from, and where they are stored on the storage device.
+
+This document is here to document this.
+
+= Data providers =
+Contains bindings specific to provider drivers and data cells as children
+of this node.
+
+Optional properties:
+ read-only: Mark the provider as read only.
+
+= Data cells =
+These are the child nodes of the provider which contain data cell
+information like offset and size in nvmem provider.
+
+Required properties:
+reg: specifies the offset in byte within the storage device.
+
+Optional properties:
+
+bits: Is pair of bit location and number of bits, which specifies offset
+ in bit and number of bits within the address range specified by reg property.
+ Offset takes values from 0-7.
+
+For example:
+
+ /* Provider */
+ qfprom: qfprom@00700000 {
+ ...
+
+ /* Data cells */
+ tsens_calibration: calib@404 {
+ reg = <0x404 0x10>;
+ };
+
+ tsens_calibration_bckp: calib_bckp@504 {
+ reg = <0x504 0x11>;
+ bits = <6 128>
+ };
+
+ pvs_version: pvs-version@6 {
+ reg = <0x6 0x2>
+ bits = <7 2>
+ };
+
+ speed_bin: speed-bin@c{
+ reg = <0xc 0x1>;
+ bits = <2 3>;
+
+ };
+ ...
+ };
+
+= Data consumers =
+Are device nodes which consume nvmem data cells/providers.
+
+Required-properties:
+nvmem-cells: list of phandle to the nvmem data cells.
+nvmem-cell-names: names for the each nvmem-cells specified. Required if
+ nvmem-cells is used.
+
+Optional-properties:
+nvmem : list of phandles to nvmem providers.
+nvmem-names: names for the each nvmem provider. required if nvmem is used.
+
+For example:
+
+ tsens {
+ ...
+ nvmem-cells = <&tsens_calibration>;
+ nvmem-cell-names = "calibration";
+ };
diff --git a/Documentation/devicetree/bindings/nvmem/qfprom.txt b/Documentation/devicetree/bindings/nvmem/qfprom.txt
new file mode 100644
index 000000000000..4ad68b7f5c18
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/qfprom.txt
@@ -0,0 +1,35 @@
+= Qualcomm QFPROM device tree bindings =
+
+This binding is intended to represent QFPROM which is found in most QCOM SOCs.
+
+Required properties:
+- compatible: should be "qcom,qfprom"
+- reg: Should contain registers location and length
+
+= Data cells =
+Are child nodes of qfprom, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+Example:
+
+ qfprom: qfprom@00700000 {
+ compatible = "qcom,qfprom";
+ reg = <0x00700000 0x8000>;
+ ...
+ /* Data cells */
+ tsens_calibration: calib@404 {
+ reg = <0x4404 0x10>;
+ };
+ };
+
+
+= Data consumers =
+Are device nodes which consume nvmem data cells.
+
+For example:
+
+ tsens {
+ ...
+ nvmem-cells = <&tsens_calibration>;
+ nvmem-cell-names = "calibration";
+ };
diff --git a/Documentation/devicetree/bindings/power/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index 0d5e7c978121..0cb44dc21f97 100644
--- a/Documentation/devicetree/bindings/power/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -88,7 +88,7 @@ This defines voltage-current-frequency combinations along with other related
properties.
Required properties:
-- opp-hz: Frequency in Hz
+- opp-hz: Frequency in Hz, expressed as a 64-bit big-endian integer.
Optional properties:
- opp-microvolt: voltage in micro Volts.
@@ -158,20 +158,20 @@ Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
opp-shared;
opp00 {
- opp-hz = <1000000000>;
+ opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>;
opp-microamp = <70000>;
clock-latency-ns = <300000>;
opp-suspend;
};
opp01 {
- opp-hz = <1100000000>;
+ opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <980000 1000000 1010000>;
opp-microamp = <80000>;
clock-latency-ns = <310000>;
};
opp02 {
- opp-hz = <1200000000>;
+ opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1025000>;
clock-latency-ns = <290000>;
turbo-mode;
@@ -237,20 +237,20 @@ independently.
*/
opp00 {
- opp-hz = <1000000000>;
+ opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>;
opp-microamp = <70000>;
clock-latency-ns = <300000>;
opp-suspend;
};
opp01 {
- opp-hz = <1100000000>;
+ opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <980000 1000000 1010000>;
opp-microamp = <80000>;
clock-latency-ns = <310000>;
};
opp02 {
- opp-hz = <1200000000>;
+ opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1025000>;
opp-microamp = <90000;
lock-latency-ns = <290000>;
@@ -313,20 +313,20 @@ DVFS state together.
opp-shared;
opp00 {
- opp-hz = <1000000000>;
+ opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>;
opp-microamp = <70000>;
clock-latency-ns = <300000>;
opp-suspend;
};
opp01 {
- opp-hz = <1100000000>;
+ opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <980000 1000000 1010000>;
opp-microamp = <80000>;
clock-latency-ns = <310000>;
};
opp02 {
- opp-hz = <1200000000>;
+ opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1025000>;
opp-microamp = <90000>;
clock-latency-ns = <290000>;
@@ -339,20 +339,20 @@ DVFS state together.
opp-shared;
opp10 {
- opp-hz = <1300000000>;
+ opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1045000 1050000 1055000>;
opp-microamp = <95000>;
clock-latency-ns = <400000>;
opp-suspend;
};
opp11 {
- opp-hz = <1400000000>;
+ opp-hz = /bits/ 64 <1400000000>;
opp-microvolt = <1075000>;
opp-microamp = <100000>;
clock-latency-ns = <400000>;
};
opp12 {
- opp-hz = <1500000000>;
+ opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <1010000 1100000 1110000>;
opp-microamp = <95000>;
clock-latency-ns = <400000>;
@@ -379,7 +379,7 @@ Example 4: Handling multiple regulators
opp-shared;
opp00 {
- opp-hz = <1000000000>;
+ opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000>, /* Supply 0 */
<960000>, /* Supply 1 */
<960000>; /* Supply 2 */
@@ -392,7 +392,7 @@ Example 4: Handling multiple regulators
/* OR */
opp00 {
- opp-hz = <1000000000>;
+ opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>, /* Supply 0 */
<960000 965000 975000>, /* Supply 1 */
<960000 965000 975000>; /* Supply 2 */
@@ -405,7 +405,7 @@ Example 4: Handling multiple regulators
/* OR */
opp00 {
- opp-hz = <1000000000>;
+ opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>, /* Supply 0 */
<960000 965000 975000>, /* Supply 1 */
<960000 965000 975000>; /* Supply 2 */
@@ -437,12 +437,12 @@ Example 5: Multiple OPP tables
opp-shared;
opp00 {
- opp-hz = <600000000>;
+ opp-hz = /bits/ 64 <600000000>;
...
};
opp01 {
- opp-hz = <800000000>;
+ opp-hz = /bits/ 64 <800000000>;
...
};
};
@@ -453,12 +453,12 @@ Example 5: Multiple OPP tables
opp-shared;
opp10 {
- opp-hz = <1000000000>;
+ opp-hz = /bits/ 64 <1000000000>;
...
};
opp11 {
- opp-hz = <1100000000>;
+ opp-hz = /bits/ 64 <1100000000>;
...
};
};
diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
index 3d217911b313..60e25161f351 100644
--- a/Documentation/devicetree/bindings/pci/ti-pci.txt
+++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
@@ -23,6 +23,9 @@ PCIe Designware Controller
interrupt-map-mask,
interrupt-map : as specified in ../designware-pcie.txt
+Optional Property:
+ - gpios : Should be added if a gpio line is required to drive PERST# line
+
Example:
axi {
compatible = "simple-bus";
diff --git a/Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt b/Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt
new file mode 100644
index 000000000000..bd61b467e30a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt
@@ -0,0 +1,26 @@
+NXP LPC18xx/43xx internal USB OTG PHY binding
+---------------------------------------------
+
+This file contains documentation for the internal USB OTG PHY found
+in NXP LPC18xx and LPC43xx SoCs.
+
+Required properties:
+- compatible : must be "nxp,lpc1850-usb-otg-phy"
+- clocks : must be exactly one entry
+See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+- #phy-cells : must be 0 for this phy
+See: Documentation/devicetree/bindings/phy/phy-bindings.txt
+
+The phy node must be a child of the creg syscon node.
+
+Example:
+creg: syscon@40043000 {
+ compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
+ reg = <0x40043000 0x1000>;
+
+ usb0_otg_phy: phy@004 {
+ compatible = "nxp,lpc1850-usb-otg-phy";
+ clocks = <&ccu1 CLK_USB0>;
+ #phy-cells = <0>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
index 16528b9eb561..0cebf7454517 100644
--- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
@@ -7,6 +7,8 @@ Required properties:
* allwinner,sun5i-a13-usb-phy
* allwinner,sun6i-a31-usb-phy
* allwinner,sun7i-a20-usb-phy
+ * allwinner,sun8i-a23-usb-phy
+ * allwinner,sun8i-a33-usb-phy
- reg : a list of offset + length pairs
- reg-names :
* "phy_ctrl"
@@ -17,12 +19,21 @@ Required properties:
- clock-names :
* "usb_phy" for sun4i, sun5i or sun7i
* "usb0_phy", "usb1_phy" and "usb2_phy" for sun6i
+ * "usb0_phy", "usb1_phy" for sun8i
- resets : a list of phandle + reset specifier pairs
- reset-names :
* "usb0_reset"
* "usb1_reset"
* "usb2_reset" for sun4i, sun6i or sun7i
+Optional properties:
+- usb0_id_det-gpios : gpio phandle for reading the otg id pin value
+- usb0_vbus_det-gpios : gpio phandle for detecting the presence of usb0 vbus
+- usb0_vbus_power-supply: power-supply phandle for usb0 vbus presence detect
+- usb0_vbus-supply : regulator phandle for controller usb0 vbus
+- usb1_vbus-supply : regulator phandle for controller usb1 vbus
+- usb2_vbus-supply : regulator phandle for controller usb2 vbus
+
Example:
usbphy: phy@0x01c13400 {
#phy-cells = <1>;
@@ -32,6 +43,13 @@ Example:
reg-names = "phy_ctrl", "pmu1", "pmu2";
clocks = <&usb_clk 8>;
clock-names = "usb_phy";
- resets = <&usb_clk 1>, <&usb_clk 2>;
- reset-names = "usb1_reset", "usb2_reset";
+ resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+ reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
+ usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+ usb0_vbus-supply = <&reg_usb0_vbus>;
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ usb2_vbus-supply = <&reg_usb2_vbus>;
};
diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index 305e3df3d9b1..9cf9446eaf2e 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -82,6 +82,9 @@ Optional properties:
- id: If there are multiple instance of the same type, in order to
differentiate between each instance "id" can be used (e.g., multi-lane PCIe
PHY). If "id" is not provided, it is set to default value of '1'.
+ - syscon-pllreset: Handle to system control region that contains the
+ CTRL_CORE_SMA_SW_0 register and register offset to the CTRL_CORE_SMA_SW_0
+ register that contains the SATA_PLL_SOFT_RESET bit. Only valid for sata_phy.
This is usually a subnode of ocp2scp to which it is connected.
@@ -100,3 +103,16 @@ usb3phy@4a084400 {
"sysclk",
"refclk";
};
+
+sata_phy: phy@4A096000 {
+ compatible = "ti,phy-pipe3-sata";
+ reg = <0x4A096000 0x80>, /* phy_rx */
+ <0x4A096400 0x64>, /* phy_tx */
+ <0x4A096800 0x40>; /* pll_ctrl */
+ reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+ ctrl-module = <&omap_control_sata>;
+ clocks = <&sys_clkin1>, <&sata_ref_clk>;
+ clock-names = "sysclk", "refclk";
+ syscon-pllreset = <&scm_conf 0x3fc>;
+ #phy-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt
new file mode 100644
index 000000000000..a81bbf37ed66
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt
@@ -0,0 +1,36 @@
+* Freescale i.MX6 UltraLite IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6ul-iomuxc"
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+ setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
+ input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+ imx6ul-pinfunc.h under device tree source folder. The last integer CONFIG is
+ the pad setting value like pull-up on this pin. Please refer to i.MX6 UltraLite
+ Reference Manual for detailed CONFIG settings.
+
+CONFIG bits definition:
+PAD_CTL_HYS (1 << 16)
+PAD_CTL_PUS_100K_DOWN (0 << 14)
+PAD_CTL_PUS_47K_UP (1 << 14)
+PAD_CTL_PUS_100K_UP (2 << 14)
+PAD_CTL_PUS_22K_UP (3 << 14)
+PAD_CTL_PUE (1 << 13)
+PAD_CTL_PKE (1 << 12)
+PAD_CTL_ODE (1 << 11)
+PAD_CTL_SPEED_LOW (0 << 6)
+PAD_CTL_SPEED_MED (1 << 6)
+PAD_CTL_SPEED_HIGH (3 << 6)
+PAD_CTL_DSE_DISABLE (0 << 3)
+PAD_CTL_DSE_260ohm (1 << 3)
+PAD_CTL_DSE_130ohm (2 << 3)
+PAD_CTL_DSE_87ohm (3 << 3)
+PAD_CTL_DSE_65ohm (4 << 3)
+PAD_CTL_DSE_52ohm (5 << 3)
+PAD_CTL_DSE_43ohm (6 << 3)
+PAD_CTL_DSE_37ohm (7 << 3)
+PAD_CTL_SRE_FAST (1 << 0)
+PAD_CTL_SRE_SLOW (0 << 0)
diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt
index 0f8ed3710c66..025b5e7df61c 100644
--- a/Documentation/devicetree/bindings/power/power_domain.txt
+++ b/Documentation/devicetree/bindings/power/power_domain.txt
@@ -48,7 +48,7 @@ Example 2:
#power-domain-cells = <1>;
};
- child: power-controller@12340000 {
+ child: power-controller@12341000 {
compatible = "foo,power-controller";
reg = <0x12341000 0x1000>;
power-domains = <&parent 0>;
diff --git a/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt b/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt
new file mode 100644
index 000000000000..0e6d8754e7ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt
@@ -0,0 +1,48 @@
+Qualcomm Coincell Charger:
+
+The hardware block controls charging for a coincell or capacitor that is
+used to provide power backup for certain features of the power management
+IC (PMIC)
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be: "qcom,pm8941-coincell"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: base address of the coincell charger registers
+
+- qcom,rset-ohms:
+ Usage: required
+ Value type: <u32>
+ Definition: resistance (in ohms) for current-limiting resistor
+ must be one of: 800, 1200, 1700, 2100
+
+- qcom,vset-millivolts:
+ Usage: required
+ Value type: <u32>
+ Definition: voltage (in millivolts) to apply for charging
+ must be one of: 2500, 3000, 3100, 3200
+
+- qcom,charger-disable:
+ Usage: optional
+ Value type: <boolean>
+ Definition: definining this property disables charging
+
+This charger is a sub-node of one of the 8941 PMIC blocks, and is specified
+as a child node in DTS of that node. See ../mfd/qcom,spmi-pmic.txt and
+../mfd/qcom-pm8xxx.txt
+
+Example:
+
+ pm8941@0 {
+ coincell@2800 {
+ compatible = "qcom,pm8941-coincell";
+ reg = <0x2800>;
+
+ qcom,rset-ohms = <2100>;
+ qcom,vset-millivolts = <3000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
index 8b70db103ca7..b8627e763dba 100644
--- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
+++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
@@ -33,6 +33,8 @@ Required properties:
- compatible: should be one of:
- "rockchip,rk3188-io-voltage-domain" for rk3188
- "rockchip,rk3288-io-voltage-domain" for rk3288
+ - "rockchip,rk3368-io-voltage-domain" for rk3368
+ - "rockchip,rk3368-pmu-io-voltage-domain" for rk3368 pmu-domains
- rockchip,grf: phandle to the syscon managing the "general register files"
@@ -64,6 +66,18 @@ Possible supplies for rk3288:
- sdcard-supply: The supply connected to SDMMC0_VDD.
- wifi-supply: The supply connected to APIO3_VDD. Also known as SDIO0.
+Possible supplies for rk3368:
+- audio-supply: The supply connected to APIO3_VDD.
+- dvp-supply: The supply connected to DVPIO_VDD.
+- flash0-supply: The supply connected to FLASH0_VDD. Typically for eMMC
+- gpio30-supply: The supply connected to APIO1_VDD.
+- gpio1830 The supply connected to APIO4_VDD.
+- sdcard-supply: The supply connected to SDMMC0_VDD.
+- wifi-supply: The supply connected to APIO2_VDD. Also known as SDIO0.
+
+Possible supplies for rk3368 pmu-domains:
+- pmu-supply: The supply connected to PMUIO_VDD.
+- vop-supply: The supply connected to LCDC_VDD.
Example:
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt
index 8832e8798912..647817527c88 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt
@@ -6,14 +6,14 @@ PSC in UART mode
For PSC in UART mode the needed PSC serial devices
are specified by fsl,mpc5121-psc-uart nodes in the
fsl,mpc5121-immr SoC node. Additionally the PSC FIFO
-Controller node fsl,mpc5121-psc-fifo is requered there:
+Controller node fsl,mpc5121-psc-fifo is required there:
-fsl,mpc5121-psc-uart nodes
+fsl,mpc512x-psc-uart nodes
--------------------------
Required properties :
- - compatible : Should contain "fsl,mpc5121-psc-uart" and "fsl,mpc5121-psc"
- - cell-index : Index of the PSC in hardware
+ - compatible : Should contain "fsl,<soc>-psc-uart" and "fsl,<soc>-psc"
+ Supported <soc>s: mpc5121, mpc5125
- reg : Offset and length of the register set for the PSC device
- interrupts : <a b> where a is the interrupt number of the
PSC FIFO Controller and b is a field that represents an
@@ -25,12 +25,21 @@ Recommended properties :
- fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4)
- fsl,tx-fifo-size : the size of the TX fifo slice (a multiple of 4)
+PSC in SPI mode
+---------------
-fsl,mpc5121-psc-fifo node
+Similar to the UART mode a PSC can be operated in SPI mode. The compatible used
+for that is fsl,mpc5121-psc-spi. It requires a fsl,mpc5121-psc-fifo as well.
+The required and recommended properties are identical to the
+fsl,mpc5121-psc-uart nodes, just use spi instead of uart in the compatible
+string.
+
+fsl,mpc512x-psc-fifo node
-------------------------
Required properties :
- - compatible : Should be "fsl,mpc5121-psc-fifo"
+ - compatible : Should be "fsl,<soc>-psc-fifo"
+ Supported <soc>s: mpc5121, mpc5125
- reg : Offset and length of the register set for the PSC
FIFO Controller
- interrupts : <a b> where a is the interrupt number of the
@@ -39,6 +48,9 @@ Required properties :
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
+Recommended properties :
+ - clocks : specifies the clock needed to operate the fifo controller
+ - clock-names : name(s) for the clock(s) listed in clocks
Example for a board using PSC0 and PSC1 devices in serial mode:
diff --git a/Documentation/devicetree/bindings/regulator/da9210.txt b/Documentation/devicetree/bindings/regulator/da9210.txt
index 3297c53cb915..7aa9b1fa6b21 100644
--- a/Documentation/devicetree/bindings/regulator/da9210.txt
+++ b/Documentation/devicetree/bindings/regulator/da9210.txt
@@ -5,6 +5,10 @@ Required properties:
- compatible: must be "dlg,da9210"
- reg: the i2c slave address of the regulator. It should be 0x68.
+Optional properties:
+
+- interrupts: a reference to the DA9210 interrupt, if available.
+
Any standard regulator properties can be used to configure the single da9210
DCDC.
diff --git a/Documentation/devicetree/bindings/regulator/da9211.txt b/Documentation/devicetree/bindings/regulator/da9211.txt
index eb618907c7de..c620493e8dbe 100644
--- a/Documentation/devicetree/bindings/regulator/da9211.txt
+++ b/Documentation/devicetree/bindings/regulator/da9211.txt
@@ -1,7 +1,7 @@
-* Dialog Semiconductor DA9211/DA9213 Voltage Regulator
+* Dialog Semiconductor DA9211/DA9213/DA9215 Voltage Regulator
Required properties:
-- compatible: "dlg,da9211" or "dlg,da9213".
+- compatible: "dlg,da9211" or "dlg,da9213" or "dlg,da9215"
- reg: I2C slave address, usually 0x68.
- interrupts: the interrupt outputs of the controller
- regulators: A node that houses a sub-node for each regulator within the
@@ -66,3 +66,31 @@ Example 2) DA9213
};
};
};
+
+
+Example 3) DA9215
+ pmic: da9215@68 {
+ compatible = "dlg,da9215";
+ reg = <0x68>;
+ interrupts = <3 27>;
+
+ regulators {
+ BUCKA {
+ regulator-name = "VBUCKA";
+ regulator-min-microvolt = < 300000>;
+ regulator-max-microvolt = <1570000>;
+ regulator-min-microamp = <4000000>;
+ regulator-max-microamp = <7000000>;
+ enable-gpios = <&gpio 27 0>;
+ };
+ BUCKB {
+ regulator-name = "VBUCKB";
+ regulator-min-microvolt = < 300000>;
+ regulator-max-microvolt = <1570000>;
+ regulator-min-microamp = <4000000>;
+ regulator-max-microamp = <7000000>;
+ enable-gpios = <&gpio 17 0>;
+ };
+ };
+ };
+
diff --git a/Documentation/devicetree/bindings/regulator/max8973-regulator.txt b/Documentation/devicetree/bindings/regulator/max8973-regulator.txt
index 55efb24e5683..f80ea2fe27e6 100644
--- a/Documentation/devicetree/bindings/regulator/max8973-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/max8973-regulator.txt
@@ -25,6 +25,12 @@ Optional properties:
-maxim,enable-frequency-shift: boolean, enable 9% frequency shift.
-maxim,enable-bias-control: boolean, enable bias control. By enabling this
startup delay can be reduce to 20us from 220us.
+-maxim,enable-etr: boolean, enable Enhanced Transient Response.
+-maxim,enable-high-etr-sensitivity: boolean, Enhanced transient response
+ circuit is enabled and set for high sensitivity. If this
+ property is available then etr will be enable default.
+
+Enhanced transient response (ETR) will affect the configuration of CKADV.
Example:
diff --git a/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt
new file mode 100644
index 000000000000..02649d8b3f5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt
@@ -0,0 +1,35 @@
+Mediatek MT6311 Regulator Driver
+
+Required properties:
+- compatible: "mediatek,mt6311-regulator"
+- reg: I2C slave address, usually 0x6b.
+- regulators: List of regulators provided by this controller. It is named
+ to VDVFS and VBIASN.
+ The definition for each of these nodes is defined using the standard binding
+ for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are:
+BUCK:
+ VDVFS
+LDO:
+ VBIASN
+
+Example:
+ mt6311: pmic@6b {
+ compatible = "mediatek,mt6311-regulator";
+ reg = <0x6b>;
+
+ regulators {
+ mt6311_vcpu_reg: VDVFS {
+ regulator-name = "VDVFS";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <10000>;
+ };
+ mt6311_ldo_reg: VBIASN {
+ regulator-name = "VBIASN";
+ regulator-min-microvolt = <200000>;
+ regulator-max-microvolt = <800000>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
index ce91f61feb12..ed936f0f34f2 100644
--- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
@@ -1,27 +1,68 @@
-pwm regulator bindings
+Bindings for the Generic PWM Regulator
+======================================
+
+Currently supports 2 modes of operation:
+
+Voltage Table: When in this mode, a voltage table (See below) of
+ predefined voltage <=> duty-cycle values must be
+ provided via DT. Limitations are that the regulator can
+ only operate at the voltages supplied in the table.
+ Intermediary duty-cycle values which would normally
+ allow finer grained voltage selection are ignored and
+ rendered useless. Although more control is given to
+ the user if the assumptions made in continuous-voltage
+ mode do not reign true.
+
+Continuous Voltage: This mode uses the regulator's maximum and minimum
+ supplied voltages specified in the
+ regulator-{min,max}-microvolt properties to calculate
+ appropriate duty-cycle values. This allows for a much
+ more fine grained solution when compared with
+ voltage-table mode above. This solution does make an
+ assumption that a %50 duty-cycle value will cause the
+ regulator voltage to run at half way between the
+ supplied max_uV and min_uV values.
Required properties:
-- compatible: Should be "pwm-regulator"
-- pwms: OF device-tree PWM specification (see PWM binding pwm.txt)
-- voltage-table: voltage and duty table, include 2 members in each set of
- brackets, first one is voltage(unit: uv), the next is duty(unit: percent)
+--------------------
+- compatible: Should be "pwm-regulator"
+
+- pwms: PWM specification (See: ../pwm/pwm.txt)
+
+Only required for Voltage Table Mode:
+- voltage-table: Voltage and Duty-Cycle table consisting of 2 cells
+ First cell is voltage in microvolts (uV)
+ Second cell is duty-cycle in percent (%)
+
+NB: To be clear, if voltage-table is provided, then the device will be used
+in Voltage Table Mode. If no voltage-table is provided, then the device will
+be used in Continuous Voltage Mode.
-Any property defined as part of the core regulator binding defined in
-regulator.txt can also be used.
+Any property defined as part of the core regulator binding can also be used.
+(See: ../regulator/regulator.txt)
-Example:
+Continuous Voltage Example:
pwm_regulator {
compatible = "pwm-regulator;
pwms = <&pwm1 0 8448 0>;
+ regulator-min-microvolt = <1016000>;
+ regulator-max-microvolt = <1114000>;
+ regulator-name = "vdd_logic";
+ };
+Voltage Table Example:
+ pwm_regulator {
+ compatible = "pwm-regulator;
+ pwms = <&pwm1 0 8448 0>;
+ regulator-min-microvolt = <1016000>;
+ regulator-max-microvolt = <1114000>;
+ regulator-name = "vdd_logic";
+
+ /* Voltage Duty-Cycle */
voltage-table = <1114000 0>,
<1095000 10>,
<1076000 20>,
<1056000 30>,
<1036000 40>,
<1016000 50>;
-
- regulator-min-microvolt = <1016000>;
- regulator-max-microvolt = <1114000>;
- regulator-name = "vdd_logic";
};
diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
index 75b4604bad07..d00bfd8624a5 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
@@ -91,13 +91,65 @@ see regulator.txt - with additional custom properties described below:
- regulator-initial-mode:
Usage: optional
Value type: <u32>
- Descrption: 1 = Set initial mode to high power mode (HPM), also referred
- to as NPM. HPM consumes more ground current than LPM, but
+ Description: 2 = Set initial mode to auto mode (automatically select
+ between HPM and LPM); not available on boost type
+ regulators.
+
+ 1 = Set initial mode to high power mode (HPM), also referred
+ to as NPM. HPM consumes more ground current than LPM, but
it can source significantly higher load current. HPM is not
available on boost type regulators. For voltage switch type
regulators, HPM implies that over current protection and
- soft start are active all the time. 0 = Set initial mode to
- low power mode (LPM).
+ soft start are active all the time.
+
+ 0 = Set initial mode to low power mode (LPM).
+
+- qcom,ocp-max-retries:
+ Usage: optional
+ Value type: <u32>
+ Description: Maximum number of times to try toggling a voltage switch
+ off and back on as a result of consecutive over current
+ events.
+
+- qcom,ocp-retry-delay:
+ Usage: optional
+ Value type: <u32>
+ Description: Time to delay in milliseconds between each voltage switch
+ toggle after an over current event takes place.
+
+- qcom,pin-ctrl-enable:
+ Usage: optional
+ Value type: <u32>
+ Description: Bit mask specifying which hardware pins should be used to
+ enable the regulator, if any; supported bits are:
+ 0 = ignore all hardware enable signals
+ BIT(0) = follow HW0_EN signal
+ BIT(1) = follow HW1_EN signal
+ BIT(2) = follow HW2_EN signal
+ BIT(3) = follow HW3_EN signal
+
+- qcom,pin-ctrl-hpm:
+ Usage: optional
+ Value type: <u32>
+ Description: Bit mask specifying which hardware pins should be used to
+ force the regulator into high power mode, if any;
+ supported bits are:
+ 0 = ignore all hardware enable signals
+ BIT(0) = follow HW0_EN signal
+ BIT(1) = follow HW1_EN signal
+ BIT(2) = follow HW2_EN signal
+ BIT(3) = follow HW3_EN signal
+ BIT(4) = follow PMIC awake state
+
+- qcom,vs-soft-start-strength:
+ Usage: optional
+ Value type: <u32>
+ Description: This property sets the soft start strength for voltage
+ switch type regulators; supported values are:
+ 0 = 0.05 uA
+ 1 = 0.25 uA
+ 2 = 0.55 uA
+ 3 = 0.75 uA
Example:
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index db88feb28c03..24bd422cecd5 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -42,6 +42,7 @@ Optional properties:
- regulator-system-load: Load in uA present on regulator that is not captured by
any consumer request.
- regulator-pull-down: Enable pull down resistor when the regulator is disabled.
+- regulator-over-current-protection: Enable over current protection.
Deprecated properties:
- regulator-compatible: If a regulator chip contains multiple
diff --git a/Documentation/devicetree/bindings/reset/ath79-reset.txt b/Documentation/devicetree/bindings/reset/ath79-reset.txt
new file mode 100644
index 000000000000..4c56330bf398
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/ath79-reset.txt
@@ -0,0 +1,20 @@
+Binding for Qualcomm Atheros AR7xxx/AR9XXX reset controller
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required Properties:
+- compatible: has to be "qca,<soctype>-reset", "qca,ar7100-reset"
+ as fallback
+- reg: Base address and size of the controllers memory area
+- #reset-cells : Specifies the number of cells needed to encode reset
+ line, should be 1
+
+Example:
+
+ reset-controller@1806001c {
+ compatible = "qca,ar9132-reset", "qca,ar7100-reset";
+ reg = <0x1806001c 0x4>;
+
+ #reset-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt b/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt
new file mode 100644
index 000000000000..b4e96a278445
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt
@@ -0,0 +1,84 @@
+NXP LPC1850 Reset Generation Unit (RGU)
+========================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "nxp,lpc1850-rgu"
+- reg: register base and length
+- clocks: phandle and clock specifier to RGU clocks
+- clock-names: should contain "delay" and "reg"
+- #reset-cells: should be 1
+
+See table below for valid peripheral reset numbers. Numbers not
+in the table below are either reserved or not applicable for
+normal operation.
+
+Reset Peripheral
+ 9 System control unit (SCU)
+ 12 ARM Cortex-M0 subsystem core (LPC43xx only)
+ 13 CPU core
+ 16 LCD controller
+ 17 USB0
+ 18 USB1
+ 19 DMA
+ 20 SDIO
+ 21 External memory controller (EMC)
+ 22 Ethernet
+ 25 Flash bank A
+ 27 EEPROM
+ 28 GPIO
+ 29 Flash bank B
+ 32 Timer0
+ 33 Timer1
+ 34 Timer2
+ 35 Timer3
+ 36 Repetitive Interrupt timer (RIT)
+ 37 State Configurable Timer (SCT)
+ 38 Motor control PWM (MCPWM)
+ 39 QEI
+ 40 ADC0
+ 41 ADC1
+ 42 DAC
+ 44 USART0
+ 45 UART1
+ 46 USART2
+ 47 USART3
+ 48 I2C0
+ 49 I2C1
+ 50 SSP0
+ 51 SSP1
+ 52 I2S0 and I2S1
+ 53 Serial Flash Interface (SPIFI)
+ 54 C_CAN1
+ 55 C_CAN0
+ 56 ARM Cortex-M0 application core (LPC4370 only)
+ 57 SGPIO (LPC43xx only)
+ 58 SPI (LPC43xx only)
+ 60 ADCHS (12-bit ADC) (LPC4370 only)
+
+Refer to NXP LPC18xx or LPC43xx user manual for more details about
+the reset signals and the connected block/peripheral.
+
+Reset provider example:
+rgu: reset-controller@40053000 {
+ compatible = "nxp,lpc1850-rgu";
+ reg = <0x40053000 0x1000>;
+ clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>;
+ clock-names = "delay", "reg";
+ #reset-cells = <1>;
+};
+
+Reset consumer example:
+mac: ethernet@40010000 {
+ compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac";
+ reg = <0x40010000 0x2000>;
+ interrupts = <5>;
+ interrupt-names = "macirq";
+ clocks = <&ccu1 CLK_CPU_ETHERNET>;
+ clock-names = "stmmaceth";
+ resets = <&rgu 22>;
+ reset-names = "stmmaceth";
+ status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/reset/socfpga-reset.txt b/Documentation/devicetree/bindings/reset/socfpga-reset.txt
index 32c1c8bfd5dc..98c9f560e5c5 100644
--- a/Documentation/devicetree/bindings/reset/socfpga-reset.txt
+++ b/Documentation/devicetree/bindings/reset/socfpga-reset.txt
@@ -3,6 +3,7 @@ Altera SOCFPGA Reset Manager
Required properties:
- compatible : "altr,rst-mgr"
- reg : Should contain 1 register ranges(address and length)
+- altr,modrst-offset : Should contain the offset of the first modrst register.
- #reset-cells: 1
Example:
@@ -10,4 +11,5 @@ Example:
#reset-cells = <1>;
compatible = "altr,rst-mgr";
reg = <0xffd05000 0x1000>;
+ altr,modrst-offset = <0x10>;
};
diff --git a/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt b/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt
index 54ae9f747e45..9ca27761f811 100644
--- a/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt
+++ b/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt
@@ -39,4 +39,4 @@ Example:
};
Macro definitions for the supported reset channels can be found in:
-include/dt-bindings/reset-controller/stih407-resets.h
+include/dt-bindings/reset/stih407-resets.h
diff --git a/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt b/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
index 5ab26b7e9d35..1cfd21d1dfa1 100644
--- a/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+++ b/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
@@ -43,5 +43,5 @@ example:
Macro definitions for the supported reset channels can be found in:
-include/dt-bindings/reset-controller/stih415-resets.h
-include/dt-bindings/reset-controller/stih416-resets.h
+include/dt-bindings/reset/stih415-resets.h
+include/dt-bindings/reset/stih416-resets.h
diff --git a/Documentation/devicetree/bindings/reset/st,sti-softreset.txt b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
index a8d3d3c25ca2..891a2fd85ed6 100644
--- a/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
+++ b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
@@ -42,5 +42,5 @@ example:
Macro definitions for the supported reset channels can be found in:
-include/dt-bindings/reset-controller/stih415-resets.h
-include/dt-bindings/reset-controller/stih416-resets.h
+include/dt-bindings/reset/stih415-resets.h
+include/dt-bindings/reset/stih416-resets.h
diff --git a/Documentation/devicetree/bindings/reset/zynq-reset.txt b/Documentation/devicetree/bindings/reset/zynq-reset.txt
new file mode 100644
index 000000000000..5860120e3064
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/zynq-reset.txt
@@ -0,0 +1,68 @@
+Xilinx Zynq Reset Manager
+
+The Zynq AP-SoC has several different resets.
+
+See Chapter 26 of the Zynq TRM (UG585) for more information about Zynq resets.
+
+Required properties:
+- compatible: "xlnx,zynq-reset"
+- reg: SLCR offset and size taken via syscon <0x200 0x48>
+- syscon: <&slcr>
+ This should be a phandle to the Zynq's SLCR registers.
+- #reset-cells: Must be 1
+
+The Zynq Reset Manager needs to be a childnode of the SLCR.
+
+Example:
+ rstc: rstc@200 {
+ compatible = "xlnx,zynq-reset";
+ reg = <0x200 0x48>;
+ #reset-cells = <1>;
+ syscon = <&slcr>;
+ };
+
+Reset outputs:
+ 0 : soft reset
+ 32 : ddr reset
+ 64 : topsw reset
+ 96 : dmac reset
+ 128: usb0 reset
+ 129: usb1 reset
+ 160: gem0 reset
+ 161: gem1 reset
+ 164: gem0 rx reset
+ 165: gem1 rx reset
+ 166: gem0 ref reset
+ 167: gem1 ref reset
+ 192: sdio0 reset
+ 193: sdio1 reset
+ 196: sdio0 ref reset
+ 197: sdio1 ref reset
+ 224: spi0 reset
+ 225: spi1 reset
+ 226: spi0 ref reset
+ 227: spi1 ref reset
+ 256: can0 reset
+ 257: can1 reset
+ 258: can0 ref reset
+ 259: can1 ref reset
+ 288: i2c0 reset
+ 289: i2c1 reset
+ 320: uart0 reset
+ 321: uart1 reset
+ 322: uart0 ref reset
+ 323: uart1 ref reset
+ 352: gpio reset
+ 384: lqspi reset
+ 385: qspi ref reset
+ 416: smc reset
+ 417: smc ref reset
+ 448: ocm reset
+ 512: fpga0 out reset
+ 513: fpga1 out reset
+ 514: fpga2 out reset
+ 515: fpga3 out reset
+ 544: a9 reset 0
+ 545: a9 reset 1
+ 552: peri reset
+
diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt
index 34c1505774bf..5d3791e789c6 100644
--- a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt
@@ -5,6 +5,7 @@ Required properties:
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: rtc alarm/event interrupt
+- clocks: phandle to input clock.
Example:
@@ -12,4 +13,5 @@ rtc@fffffe00 {
compatible = "atmel,at91rm9200-rtc";
reg = <0xfffffe00 0x100>;
interrupts = <1 4 7>;
+ clocks = <&clk32k>;
};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc.txt b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
new file mode 100644
index 000000000000..5bcd31d995b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
@@ -0,0 +1,26 @@
+* Real Time Clock of the i.MX SoCs
+
+RTC controller for the i.MX SoCs
+
+Required properties:
+- compatible: Should be "fsl,imx1-rtc" or "fsl,imx21-rtc".
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: IRQ line for the RTC.
+- clocks: should contain two entries:
+ * one for the input reference
+ * one for the the SoC RTC
+- clock-names: should contain:
+ * "ref" for the input reference clock
+ * "ipg" for the SoC RTC clock
+
+Example:
+
+rtc@10007000 {
+ compatible = "fsl,imx21-rtc";
+ reg = <0x10007000 0x1000>;
+ interrupts = <22>;
+ clocks = <&clks IMX27_CLK_CKIL>,
+ <&clks IMX27_CLK_RTC_IPG_GATE>;
+ clock-names = "ref", "ipg";
+};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
index 4ba4dbd34289..43a83668673a 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
@@ -8,6 +8,7 @@ Required properties:
Wakeup generation for event Alarm. It can also be
used to control an external PMIC via the
pmic_power_en pin.
+ - "ti,am4372-rtc" - for RTC IP used similar to that on AM437X SoC family.
- reg: Address range of rtc register set
- interrupts: rtc timer, alarm interrupts in order
- interrupt-parent: phandle for the interrupt controller
diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt
index 90787aa2e648..e6e6142e33ac 100644
--- a/Documentation/devicetree/bindings/serial/atmel-usart.txt
+++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt
@@ -22,6 +22,8 @@ Optional properties:
memory peripheral interface and USART DMA channel ID, FIFO configuration.
Refer to dma.txt and atmel-dma.txt for details.
- dma-names: "rx" for RX channel, "tx" for TX channel.
+- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
+ capable USARTs.
<chip> compatible description:
- at91rm9200: legacy USART support
@@ -57,4 +59,5 @@ Example:
dmas = <&dma0 2 0x3>,
<&dma0 2 0x204>;
dma-names = "tx", "rx";
+ atmel,fifo-size = <32>;
};
diff --git a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt
index ebcbb62c0a76..51b3c9e80ad9 100644
--- a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt
+++ b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt
@@ -6,7 +6,7 @@ Required properties:
- interrupts: device interrupt
Optional properties:
-- {dtr,dsr,ri,cd}-gpios: specify a GPIO for DTR/DSR/RI/CD
+- {dtr,dsr,rng,dcd}-gpios: specify a GPIO for DTR/DSR/RI/DCD
line respectively.
Example:
@@ -16,4 +16,8 @@ serial@b00260000 {
reg = <0xb0026000 0x1000>;
interrupts = <68>;
status = "disabled";
+ dtr-gpios = <&sysgpio 0 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&sysgpio 1 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&sysgpio 2 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&sysgpio 3 GPIO_ACTIVE_LOW>;
};
diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt
index 8d63f1da07aa..2d47add34765 100644
--- a/Documentation/devicetree/bindings/serial/mtk-uart.txt
+++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt
@@ -5,10 +5,12 @@ Required properties:
* "mediatek,mt8135-uart" for MT8135 compatible UARTS
* "mediatek,mt8127-uart" for MT8127 compatible UARTS
* "mediatek,mt8173-uart" for MT8173 compatible UARTS
+ * "mediatek,mt6795-uart" for MT6795 compatible UARTS
* "mediatek,mt6589-uart" for MT6589 compatible UARTS
* "mediatek,mt6582-uart" for MT6582 compatible UARTS
- * "mediatek,mt6577-uart" for all compatible UARTS (MT8173, MT6589, MT6582,
- MT6577)
+ * "mediatek,mt6580-uart" for MT6580 compatible UARTS
+ * "mediatek,mt6577-uart" for all compatible UARTS (MT8173, MT6795,
+ MT6589, MT6582, MT6580, MT6577)
- reg: The base address of the UART register bank.
diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt
index 54c2a155c783..7a71b5de77d6 100644
--- a/Documentation/devicetree/bindings/serial/omap_serial.txt
+++ b/Documentation/devicetree/bindings/serial/omap_serial.txt
@@ -4,6 +4,9 @@ Required properties:
- compatible : should be "ti,omap2-uart" for OMAP2 controllers
- compatible : should be "ti,omap3-uart" for OMAP3 controllers
- compatible : should be "ti,omap4-uart" for OMAP4 controllers
+- compatible : should be "ti,am4372-uart" for AM437x controllers
+- compatible : should be "ti,am3352-uart" for AM335x controllers
+- compatible : should be "ti,dra742-uart" for DRA7x controllers
- reg : address and length of the register space
- interrupts or interrupts-extended : Should contain the uart interrupt
specifier or both the interrupt
diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
new file mode 100644
index 000000000000..c0511142b39c
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
@@ -0,0 +1,41 @@
+MediaTek SCPSYS
+===============
+
+The System Control Processor System (SCPSYS) has several power management
+related tasks in the system. The tasks include thermal measurement, dynamic
+voltage frequency scaling (DVFS), interrupt filter and lowlevel sleep control.
+The System Power Manager (SPM) inside the SCPSYS is for the MTCMOS power
+domain control.
+
+The driver implements the Generic PM domain bindings described in
+power/power_domain.txt. It provides the power domains defined in
+include/dt-bindings/power/mt8173-power.h.
+
+Required properties:
+- compatible: Must be "mediatek,mt8173-scpsys"
+- #power-domain-cells: Must be 1
+- reg: Address range of the SCPSYS unit
+- infracfg: must contain a phandle to the infracfg controller
+- clock, clock-names: clocks according to the common clock binding.
+ The clocks needed "mm" and "mfg". These are the
+ clocks which hardware needs to be enabled before
+ enabling certain power domains.
+
+Example:
+
+ scpsys: scpsys@10006000 {
+ #power-domain-cells = <1>;
+ compatible = "mediatek,mt8173-scpsys";
+ reg = <0 0x10006000 0 0x1000>;
+ infracfg = <&infracfg>;
+ clocks = <&clk26m>,
+ <&topckgen CLK_TOP_MM_SEL>;
+ clock-names = "mfg", "mm";
+ };
+
+Example consumer:
+
+ afe: mt8173-afe-pcm@11220000 {
+ compatible = "mediatek,mt8173-afe-pcm";
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_AUDIO>;
+ };
diff --git a/Documentation/devicetree/bindings/soc/qcom,smd-rpm.txt b/Documentation/devicetree/bindings/soc/qcom,smd-rpm.txt
new file mode 100644
index 000000000000..e27f5c4c54fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom,smd-rpm.txt
@@ -0,0 +1,117 @@
+Qualcomm Resource Power Manager (RPM) over SMD
+
+This driver is used to interface with the Resource Power Manager (RPM) found in
+various Qualcomm platforms. The RPM allows each component in the system to vote
+for state of the system resources, such as clocks, regulators and bus
+frequencies.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-msm8974"
+
+- qcom,smd-channels:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Shared Memory channel used for communication with the RPM
+
+= SUBDEVICES
+
+The RPM exposes resources to its subnodes. The below bindings specify the set
+of valid subnodes that can operate on these resources.
+
+== Regulators
+
+Regulator nodes are identified by their compatible:
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8841-regulators"
+ "qcom,rpm-pm8941-regulators"
+
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_s4-supply:
+- vdd_s5-supply:
+- vdd_s6-supply:
+- vdd_s7-supply:
+- vdd_s8-supply:
+ Usage: optional (pm8841 only)
+ Value type: <phandle>
+ Definition: reference to regulator supplying the input pin, as
+ described in the data sheet
+
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_l1_l3-supply:
+- vdd_l2_lvs1_2_3-supply:
+- vdd_l4_l11-supply:
+- vdd_l5_l7-supply:
+- vdd_l6_l12_l14_l15-supply:
+- vdd_l8_l16_l18_l19-supply:
+- vdd_l9_l10_l17_l22-supply:
+- vdd_l13_l20_l23_l24-supply:
+- vdd_l21-supply:
+- vin_5vs-supply:
+ Usage: optional (pm8941 only)
+ Value type: <phandle>
+ Definition: reference to regulator supplying the input pin, as
+ described in the data sheet
+
+The regulator node houses sub-nodes for each regulator within the device. Each
+sub-node is identified using the node's name, with valid values listed for each
+of the pmics below.
+
+pm8841:
+ s1, s2, s3, s4, s5, s6, s7, s8
+
+pm8941:
+ s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
+ l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2,
+ lvs3, 5vs1, 5vs2
+
+The content of each sub-node is defined by the standard binding for regulators -
+see regulator.txt.
+
+= EXAMPLE
+
+ smd {
+ compatible = "qcom,smd";
+
+ rpm {
+ interrupts = <0 168 1>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm_requests {
+ compatible = "qcom,rpm-msm8974";
+ qcom,smd-channels = "rpm_requests";
+
+ pm8941-regulators {
+ compatible = "qcom,rpm-pm8941-regulators";
+ vdd_l13_l20_l23_l24-supply = <&pm8941_boost>;
+
+ pm8941_s3: s3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_boost: s4 {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ pm8941_l20: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+ };
+ };
+ };
+ };
+
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt
new file mode 100644
index 000000000000..f65c76db9859
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt
@@ -0,0 +1,79 @@
+Qualcomm Shared Memory Driver (SMD) binding
+
+This binding describes the Qualcomm Shared Memory Driver, a fifo based
+communication channel for sending data between the various subsystems in
+Qualcomm platforms.
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "qcom,smd"
+
+= EDGES
+
+Each subnode of the SMD node represents a remote subsystem or a remote
+processor of some sort - or in SMD language an "edge". The name of the edges
+are not important.
+The edge is described by the following properties:
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should specify the IRQ used by the remote processor to
+ signal this processor about communication related updates
+
+- qcom,ipc:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: three entries specifying the outgoing ipc bit used for
+ signaling the remote processor:
+ - phandle to a syscon node representing the apcs registers
+ - u32 representing offset to the register within the syscon
+ - u32 representing the ipc bit within the register
+
+- qcom,smd-edge:
+ Usage: required
+ Value type: <u32>
+ Definition: the identifier of the remote processor in the smd channel
+ allocation table
+
+= SMD DEVICES
+
+In turn, subnodes of the "edges" represent devices tied to SMD channels on that
+"edge". The names of the devices are not important. The properties of these
+nodes are defined by the individual bindings for the SMD devices - but must
+contain the following property:
+
+- qcom,smd-channels:
+ Usage: required
+ Value type: <stringlist>
+ Definition: a list of channels tied to this device, used for matching
+ the device to channels
+
+= EXAMPLE
+
+The following example represents a smd node, with one edge representing the
+"rpm" subsystem. For the "rpm" subsystem we have a device tied to the
+"rpm_request" channel.
+
+ apcs: syscon@f9011000 {
+ compatible = "syscon";
+ reg = <0xf9011000 0x1000>;
+ };
+
+ smd {
+ compatible = "qcom,smd";
+
+ rpm {
+ interrupts = <0 168 1>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm_requests {
+ compatible = "qcom,rpm-msm8974";
+ qcom,smd-channels = "rpm_requests";
+
+ ...
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt
index 13e2ef496724..275c6ea356f6 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt
@@ -8,10 +8,10 @@ Required properties:
- interrupts : The interrupt from the HDA controller.
- clocks : Must contain an entry for each required entry in clock-names.
See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries: hda, hdacodec_2x, hda2hdmi
+- clock-names : Must include the following entries: hda, hda2hdmi, hda2codec_2x
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
-- reset-names : Must include the following entries: hda, hdacodec_2x, hda2hdmi
+- reset-names : Must include the following entries: hda, hda2hdmi, hda2codec_2x
Example:
@@ -24,7 +24,7 @@ hda@0,70030000 {
<&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
clock-names = "hda", "hda2hdmi", "hda2codec_2x";
resets = <&tegra_car 125>, /* hda */
- <&tegra_car 128>; /* hda2hdmi */
- <&tegra_car 111>, /* hda2codec_2x */
+ <&tegra_car 128>, /* hda2hdmi */
+ <&tegra_car 111>; /* hda2codec_2x */
reset-names = "hda", "hda2hdmi", "hda2codec_2x";
};
diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
index bd99193e87b9..204b311e0400 100644
--- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
+++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
@@ -10,6 +10,8 @@ Required properties:
Optional properties:
- cs-gpios : Specifies the gpio pis to be used for chipselects.
- num-cs : The number of chipselects. If omitted, this will default to 4.
+- reg-io-width : The I/O register width (in bytes) implemented by this
+ device. Supported values are 2 or 4 (the default).
Child nodes as per the generic SPI binding.
diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt
index 12ecfe9e3599..d1e914adcf6e 100644
--- a/Documentation/devicetree/bindings/spi/spi-davinci.txt
+++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt
@@ -12,6 +12,8 @@ Required properties:
- compatible:
- "ti,dm6441-spi" for SPI used similar to that on DM644x SoC family
- "ti,da830-spi" for SPI used similar to that on DA8xx SoC family
+ - "ti,keystone-spi" for SPI used similar to that on Keystone2 SoC
+ family
- reg: Offset and length of SPI controller register space
- num-cs: Number of chip selects. This includes internal as well as
GPIO chip selects.
diff --git a/Documentation/devicetree/bindings/spi/spi-img-spfi.txt b/Documentation/devicetree/bindings/spi/spi-img-spfi.txt
index e02fbf18c82c..494db6012d02 100644
--- a/Documentation/devicetree/bindings/spi/spi-img-spfi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-img-spfi.txt
@@ -21,6 +21,7 @@ Required properties:
Optional properties:
- img,supports-quad-mode: Should be set if the interface supports quad mode
SPI transfers.
+- spfi-max-frequency: Maximum speed supported by the spfi block.
Example:
diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
new file mode 100644
index 000000000000..dcefc438272f
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
@@ -0,0 +1,51 @@
+Binding for MTK SPI controller
+
+Required properties:
+- compatible: should be one of the following.
+ - mediatek,mt8173-spi: for mt8173 platforms
+ - mediatek,mt8135-spi: for mt8135 platforms
+ - mediatek,mt6589-spi: for mt6589 platforms
+
+- #address-cells: should be 1.
+
+- #size-cells: should be 0.
+
+- reg: Address and length of the register set for the device
+
+- interrupts: Should contain spi interrupt
+
+- clocks: phandles to input clocks.
+ The first should be <&topckgen CLK_TOP_SPI_SEL>.
+ The second should be one of the following.
+ - <&clk26m>: specify parent clock 26MHZ.
+ - <&topckgen CLK_TOP_SYSPLL3_D2>: specify parent clock 109MHZ.
+ It's the default one.
+ - <&topckgen CLK_TOP_SYSPLL4_D2>: specify parent clock 78MHZ.
+ - <&topckgen CLK_TOP_UNIVPLL2_D4>: specify parent clock 104MHZ.
+ - <&topckgen CLK_TOP_UNIVPLL1_D8>: specify parent clock 78MHZ.
+
+- clock-names: shall be "spi-clk" for the controller clock, and
+ "parent-clk" for the parent clock.
+
+Optional properties:
+- mediatek,pad-select: specify which pins group(ck/mi/mo/cs) spi
+ controller used, this value should be 0~3, only required for MT8173.
+ 0: specify GPIO69,70,71,72 for spi pins.
+ 1: specify GPIO102,103,104,105 for spi pins.
+ 2: specify GPIO128,129,130,131 for spi pins.
+ 3: specify GPIO5,6,7,8 for spi pins.
+
+Example:
+
+- SoC Specific Portion:
+spi: spi@1100a000 {
+ compatible = "mediatek,mt8173-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x1100a000 0 0x1000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SPI_SEL>, <&topckgen CLK_TOP_SYSPLL3_D2>;
+ clock-names = "spi-clk", "parent-clk";
+ mediatek,pad-select = <0>;
+ status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-xlp.txt b/Documentation/devicetree/bindings/spi/spi-xlp.txt
new file mode 100644
index 000000000000..40e82d51efec
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-xlp.txt
@@ -0,0 +1,39 @@
+SPI Master controller for Netlogic XLP MIPS64 SOCs
+==================================================
+
+Currently this SPI controller driver is supported for the following
+Netlogic XLP SoCs:
+ XLP832, XLP316, XLP208, XLP980, XLP532
+
+Required properties:
+- compatible : Should be "netlogic,xlp832-spi".
+- #address-cells : Number of cells required to define a chip select address
+ on the SPI bus.
+- #size-cells : Should be zero.
+- reg : Should contain register location and length.
+- clocks : Phandle of the spi clock
+- interrupts : Interrupt number used by this controller.
+- interrupt-parent : Phandle of the parent interrupt controller.
+
+SPI slave nodes must be children of the SPI master node and can contain
+properties described in Documentation/devicetree/bindings/spi/spi-bus.txt.
+
+Example:
+
+ spi: xlp_spi@3a100 {
+ compatible = "netlogic,xlp832-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x3a100 0x100>;
+ clocks = <&spi_clk>;
+ interrupts = <34>;
+ interrupt-parent = <&pic>;
+
+ spi_nor@1 {
+ compatible = "spansion,s25sl12801";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <1>; /* Chip Select */
+ spi-max-frequency = <40000000>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt b/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt
index 307537787574..555fb117d4fa 100644
--- a/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt
+++ b/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt
@@ -1,4 +1,4 @@
-* Freescale i.MX28 LRADC device driver
+* Freescale MXS LRADC device driver
Required properties:
- compatible: Should be "fsl,imx23-lradc" for i.MX23 SoC and "fsl,imx28-lradc"
diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
index 7c4408ff4b83..53a3029b7589 100644
--- a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
+++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
@@ -2,7 +2,11 @@ Mediatek MT6577, MT6572 and MT6589 Timers
---------------------------------------
Required properties:
-- compatible: Should be "mediatek,mt6577-timer"
+- compatible should contain:
+ * "mediatek,mt6589-timer" for MT6589 compatible timers
+ * "mediatek,mt6580-timer" for MT6580 compatible timers
+ * "mediatek,mt6577-timer" for all compatible timers (MT6589, MT6580,
+ MT6577)
- reg: Should contain location and length for timers register.
- clocks: Clocks driving the timer hardware. This list should include two
clocks. The order is system clock and as second clock the RTC clock.
diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt
new file mode 100644
index 000000000000..862cd7c79805
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt
@@ -0,0 +1,29 @@
+Allwinner sun4i A10 musb DRC/OTG controller
+-------------------------------------------
+
+Required properties:
+ - compatible : "allwinner,sun4i-a10-musb", "allwinner,sun6i-a31-musb"
+ or "allwinner,sun8i-a33-musb"
+ - reg : mmio address range of the musb controller
+ - clocks : clock specifier for the musb controller ahb gate clock
+ - reset : reset specifier for the ahb reset (A31 and newer only)
+ - interrupts : interrupt to which the musb controller is connected
+ - interrupt-names : must be "mc"
+ - phys : phy specifier for the otg phy
+ - phy-names : must be "usb"
+ - dr_mode : Dual-Role mode must be "host" or "otg"
+ - extcon : extcon specifier for the otg phy
+
+Example:
+
+ usb_otg: usb@01c13000 {
+ compatible = "allwinner,sun4i-a10-musb";
+ reg = <0x01c13000 0x0400>;
+ clocks = <&ahb_gates 0>;
+ interrupts = <38>;
+ interrupt-names = "mc";
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ extcon = <&usbphy 0>;
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index 553e2fae3a76..d71ef07bca5d 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -30,6 +30,21 @@ Optional properties:
argument that indicate usb controller index
- disable-over-current: (FSL only) disable over current detect
- external-vbus-divider: (FSL only) enables off-chip resistor divider for Vbus
+- itc-setting: interrupt threshold control register control, the setting
+ should be aligned with ITC bits at register USBCMD.
+- ahb-burst-config: it is vendor dependent, the required value should be
+ aligned with AHBBRST at SBUSCFG, the range is from 0x0 to 0x7. This
+ property is used to change AHB burst configuration, check the chipidea
+ spec for meaning of each value. If this property is not existed, it
+ will use the reset value.
+- tx-burst-size-dword: it is vendor dependent, the tx burst size in dword
+ (4 bytes), This register represents the maximum length of a the burst
+ in 32-bit words while moving data from system memory to the USB
+ bus, changing this value takes effect only the SBUSCFG.AHBBRST is 0.
+- rx-burst-size-dword: it is vendor dependent, the rx burst size in dword
+ (4 bytes), This register represents the maximum length of a the burst
+ in 32-bit words while moving data from the USB bus to system memory,
+ changing this value takes effect only the SBUSCFG.AHBBRST is 0.
Example:
@@ -41,4 +56,9 @@ Example:
phys = <&usb_phy0>;
phy-names = "usb-phy";
vbus-supply = <&reg_usb0_vbus>;
+ gadget-itc-setting = <0x4>; /* 4 micro-frames */
+ /* Incremental burst of unspecified length */
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>; /* 64 bytes */
+ rx-burst-size-dword = <0x10>;
};
diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt
index 477d5bb5e51c..bba825711873 100644
--- a/Documentation/devicetree/bindings/usb/generic.txt
+++ b/Documentation/devicetree/bindings/usb/generic.txt
@@ -11,6 +11,19 @@ Optional properties:
"peripheral" and "otg". In case this attribute isn't
passed via DT, USB DRD controllers should default to
OTG.
+ - otg-rev: tells usb driver the release number of the OTG and EH supplement
+ with which the device and its descriptors are compliant,
+ in binary-coded decimal (i.e. 2.0 is 0200H). This
+ property is used if any real OTG features(HNP/SRP/ADP)
+ is enabled, if ADP is required, otg-rev should be
+ 0x0200 or above.
+ - hnp-disable: tells OTG controllers we want to disable OTG HNP, normally HNP
+ is the basic function of real OTG except you want it
+ to be a srp-capable only B device.
+ - srp-disable: tells OTG controllers we want to disable OTG SRP, SRP is
+ optional for OTG device.
+ - adp-disable: tells OTG controllers we want to disable OTG ADP, ADP is
+ optional for OTG device.
This is an attribute to a USB controller such as:
@@ -21,4 +34,6 @@ dwc3@4a030000 {
usb-phy = <&usb2_phy>, <&usb3,phy>;
maximum-speed = "super-speed";
dr_mode = "otg";
+ otg-rev = <0x0200>;
+ adp-disable;
};
diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
index bd8d9e753029..8654a3ec23e4 100644
--- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt
+++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
@@ -52,6 +52,10 @@ Required properties:
Optional properties:
- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
+- switch-gpio: A phandle + gpio-specifier pair. Some boards are using Dual
+ SPDT USB Switch, witch is cotrolled by GPIO to de/multiplex
+ D+/D- USB lines between connectors.
+
- qcom,phy-init-sequence: PHY configuration sequence values. This is related to Device
Mode Eye Diagram test. Start address at which these values will be
written is ULPI_EXT_VENDOR_SPECIFIC. Value of -1 is reserved as
diff --git a/Documentation/devicetree/bindings/usb/qcom,usb-8x16-phy.txt b/Documentation/devicetree/bindings/usb/qcom,usb-8x16-phy.txt
new file mode 100644
index 000000000000..2cb2168cef41
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/qcom,usb-8x16-phy.txt
@@ -0,0 +1,76 @@
+Qualcomm's APQ8016/MSM8916 USB transceiver controller
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: Should contain "qcom,usb-8x16-phy".
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: USB PHY base address and length of the register map
+
+- clocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: See clock-bindings.txt section "consumers". List of
+ two clock specifiers for interface and core controller
+ clocks.
+
+- clock-names:
+ Usage: required
+ Value type: <string>
+ Definition: Must contain "iface" and "core" strings.
+
+- vddcx-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: phandle to the regulator VDCCX supply node.
+
+- v1p8-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: phandle to the regulator 1.8V supply node.
+
+- v3p3-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: phandle to the regulator 3.3V supply node.
+
+- resets:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: See reset.txt section "consumers". PHY reset specifier.
+
+- reset-names:
+ Usage: required
+ Value type: <string>
+ Definition: Must contain "phy" string.
+
+- switch-gpio:
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: Some boards are using Dual SPDT USB Switch, witch is
+ controlled by GPIO to de/multiplex D+/D- USB lines
+ between connectors.
+
+Example:
+ usb_phy: phy@78d9000 {
+ compatible = "qcom,usb-8x16-phy";
+ reg = <0x78d9000 0x400>;
+
+ vddcx-supply = <&pm8916_s1_corner>;
+ v1p8-supply = <&pm8916_l7>;
+ v3p3-supply = <&pm8916_l13>;
+
+ clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+ <&gcc GCC_USB_HS_SYSTEM_CLK>;
+ clock-names = "iface", "core";
+
+ resets = <&gcc GCC_USB2A_PHY_BCR>;
+ reset-names = "phy";
+
+ // D+/D- lines: 1 - Routed to HUB, 0 - Device connector
+ switch-gpio = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>;
+ };
+
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index d444757c4d9e..56a6d4e79383 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -46,6 +46,7 @@ chipone ChipOne
chipspark ChipSPARK
chrp Common Hardware Reference Platform
chunghwa Chunghwa Picture Tubes Ltd.
+ciaa Computadora Industrial Abierta Argentina
cirrus Cirrus Logic, Inc.
cloudengines Cloud Engines, Inc.
cnm Chips&Media, Inc.
@@ -112,6 +113,7 @@ intel Intel Corporation
intercontrol Inter Control Group
isee ISEE 2007 S.L.
isil Intersil
+jedec JEDEC Solid State Technology Association
karo Ka-Ro electronics GmbH
keymile Keymile GmbH
kinetic Kinetic Technologies
@@ -135,6 +137,7 @@ mitsubishi Mitsubishi Electric Corporation
mosaixtech Mosaix Technologies, Inc.
moxa Moxa
mpl MPL AG
+msi Micro-Star International Co. Ltd.
mti Imagination Technologies Ltd. (formerly MIPS Technologies Inc.)
mundoreader Mundo Reader S.L.
murata Murata Manufacturing Co., Ltd.
@@ -143,6 +146,7 @@ national National Semiconductor
neonode Neonode Inc.
netgear NETGEAR
netlogic Broadcom Corporation (formerly NetLogic Microsystems)
+netxeon Shenzhen Netxeon Technology CO., LTD
newhaven Newhaven Display International
nintendo Nintendo
nokia Nokia
@@ -181,6 +185,7 @@ sbs Smart Battery System
schindler Schindler
seagate Seagate Technology PLC
semtech Semtech Corporation
+sharp Sharp Corporation
sil Silicon Image
silabs Silicon Laboratories
siliconmitus Silicon Mitus, Inc.
diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
index a4d869744f59..86fa6de1019b 100644
--- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
@@ -6,6 +6,7 @@ Required properties:
- compatible: must be "atmel,at91sam9260-wdt".
- reg: physical base address of the controller and length of memory mapped
region.
+- clocks: phandle to input clock.
Optional properties:
- timeout-sec: contains the watchdog timeout in seconds.
@@ -39,6 +40,7 @@ Example:
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
timeout-sec = <15>;
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
diff --git a/Documentation/email-clients.txt b/Documentation/email-clients.txt
index c7d49b885559..3fa450881ecb 100644
--- a/Documentation/email-clients.txt
+++ b/Documentation/email-clients.txt
@@ -93,7 +93,7 @@ Evolution (GUI)
Some people use this successfully for patches.
When composing mail select: Preformat
- from Format->Heading->Preformatted (Ctrl-7)
+ from Format->Paragraph Style->Preformatted (Ctrl-7)
or the toolbar
Then use:
diff --git a/Documentation/fb/sm712fb.txt b/Documentation/fb/sm712fb.txt
new file mode 100644
index 000000000000..c388442edf51
--- /dev/null
+++ b/Documentation/fb/sm712fb.txt
@@ -0,0 +1,31 @@
+What is sm712fb?
+=================
+
+This is a graphics framebuffer driver for Silicon Motion SM712 based processors.
+
+How to use it?
+==============
+
+Switching modes is done using the video=sm712fb:... boot parameter.
+
+If you want, for example, enable a resolution of 1280x1024x24bpp you should
+pass to the kernel this command line: "video=sm712fb:0x31B".
+
+You should not compile-in vesafb.
+
+Currently supported video modes are:
+
+[Graphic modes]
+
+bpp | 640x480 800x600 1024x768 1280x1024
+----+--------------------------------------------
+ 8 | 0x301 0x303 0x305 0x307
+ 16 | 0x311 0x314 0x317 0x31A
+ 24 | 0x312 0x315 0x318 0x31B
+
+Missing Features
+================
+(alias TODO list)
+
+ * 2D acceleratrion
+ * dual-head support
diff --git a/Documentation/filesystems/btrfs.txt b/Documentation/filesystems/btrfs.txt
index d11cc2f8077b..c772b47e7ef0 100644
--- a/Documentation/filesystems/btrfs.txt
+++ b/Documentation/filesystems/btrfs.txt
@@ -61,7 +61,7 @@ Options with (*) are default options and will not show in the mount options.
check_int enables the integrity checker module, which examines all
block write requests to ensure on-disk consistency, at a large
- memory and CPU cost.
+ memory and CPU cost.
check_int_data includes extent data in the integrity checks, and
implies the check_int option.
@@ -113,7 +113,7 @@ Options with (*) are default options and will not show in the mount options.
Disable/enable debugging option to be more verbose in some ENOSPC conditions.
fatal_errors=<action>
- Action to take when encountering a fatal error:
+ Action to take when encountering a fatal error:
"bug" - BUG() on a fatal error. This is the default.
"panic" - panic() on a fatal error.
@@ -132,10 +132,10 @@ Options with (*) are default options and will not show in the mount options.
max_inline=<bytes>
Specify the maximum amount of space, in bytes, that can be inlined in
- a metadata B-tree leaf. The value is specified in bytes, optionally
+ a metadata B-tree leaf. The value is specified in bytes, optionally
with a K, M, or G suffix, case insensitive. In practice, this value
is limited by the root sector size, with some space unavailable due
- to leaf headers. For a 4k sectorsize, max inline data is ~3900 bytes.
+ to leaf headers. For a 4k sector size, max inline data is ~3900 bytes.
metadata_ratio=<value>
Specify that 1 metadata chunk should be allocated after every <value>
@@ -170,7 +170,7 @@ Options with (*) are default options and will not show in the mount options.
recovery
Enable autorecovery attempts if a bad tree root is found at mount time.
- Currently this scans a list of several previous tree roots and tries to
+ Currently this scans a list of several previous tree roots and tries to
use the first readable.
rescan_uuid_tree
@@ -194,7 +194,7 @@ Options with (*) are default options and will not show in the mount options.
ssd_spread
Options to control ssd allocation schemes. By default, BTRFS will
enable or disable ssd allocation heuristics depending on whether a
- rotational or nonrotational disk is in use. The ssd and nossd options
+ rotational or non-rotational disk is in use. The ssd and nossd options
can override this autodetection.
The ssd_spread mount option attempts to allocate into big chunks
@@ -216,13 +216,13 @@ Options with (*) are default options and will not show in the mount options.
This allows mounting of subvolumes which are not in the root of the mounted
filesystem.
You can use "btrfs subvolume show " to see the object ID for a subvolume.
-
+
thread_pool=<number>
The number of worker threads to allocate. The default number is equal
to the number of CPUs + 2, or 8, whichever is smaller.
user_subvol_rm_allowed
- Allow subvolumes to be deleted by a non-root user. Use with caution.
+ Allow subvolumes to be deleted by a non-root user. Use with caution.
MAILING LIST
============
diff --git a/Documentation/filesystems/debugfs.txt b/Documentation/filesystems/debugfs.txt
index 88ab81c79109..463f595733e8 100644
--- a/Documentation/filesystems/debugfs.txt
+++ b/Documentation/filesystems/debugfs.txt
@@ -51,6 +51,17 @@ operations should be provided; others can be included as needed. Again,
the return value will be a dentry pointer to the created file, NULL for
error, or ERR_PTR(-ENODEV) if debugfs support is missing.
+Create a file with an initial size, the following function can be used
+instead:
+
+ struct dentry *debugfs_create_file_size(const char *name, umode_t mode,
+ struct dentry *parent, void *data,
+ const struct file_operations *fops,
+ loff_t file_size);
+
+file_size is the initial file size. The other parameters are the same
+as the function debugfs_create_file.
+
In a number of cases, the creation of a set of file operations is not
actually necessary; the debugfs code provides a number of helper functions
for simple situations. Files containing a single integer value can be
@@ -100,6 +111,14 @@ A read on the resulting file will yield either Y (for non-zero values) or
N, followed by a newline. If written to, it will accept either upper- or
lower-case values, or 1 or 0. Any other input will be silently ignored.
+Also, atomic_t values can be placed in debugfs with:
+
+ struct dentry *debugfs_create_atomic_t(const char *name, umode_t mode,
+ struct dentry *parent, atomic_t *value)
+
+A read of this file will get atomic_t values, and a write of this file
+will set atomic_t values.
+
Another option is exporting a block of arbitrary binary data, with
this structure and function:
@@ -147,6 +166,27 @@ The "base" argument may be 0, but you may want to build the reg32 array
using __stringify, and a number of register names (macros) are actually
byte offsets over a base for the register block.
+If you want to dump an u32 array in debugfs, you can create file with:
+
+ struct dentry *debugfs_create_u32_array(const char *name, umode_t mode,
+ struct dentry *parent,
+ u32 *array, u32 elements);
+
+The "array" argument provides data, and the "elements" argument is
+the number of elements in the array. Note: Once array is created its
+size can not be changed.
+
+There is a helper function to create device related seq_file:
+
+ struct dentry *debugfs_create_devm_seqfile(struct device *dev,
+ const char *name,
+ struct dentry *parent,
+ int (*read_fn)(struct seq_file *s,
+ void *data));
+
+The "dev" argument is the device related to this debugfs file, and
+the "read_fn" is a function pointer which to be called to print the
+seq_file content.
There are a couple of other directory-oriented helper functions:
diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt
index b35a64b82f9e..9494afb9476a 100644
--- a/Documentation/filesystems/sysfs.txt
+++ b/Documentation/filesystems/sysfs.txt
@@ -212,7 +212,10 @@ Other notes:
- show() methods should return the number of bytes printed into the
buffer. This is the return value of scnprintf().
-- show() should always use scnprintf().
+- show() must not use snprintf() when formatting the value to be
+ returned to user space. If you can guarantee that an overflow
+ will never happen you can use sprintf() otherwise you must use
+ scnprintf().
- store() should return the number of bytes used from the buffer. If the
entire buffer has been used, just return the count argument.
diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275
index 15b4a20d5062..d697229e3c18 100644
--- a/Documentation/hwmon/adm1275
+++ b/Documentation/hwmon/adm1275
@@ -14,6 +14,10 @@ Supported chips:
Prefix: 'adm1276'
Addresses scanned: -
Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf
+ * Analog Devices ADM1293/ADM1294
+ Prefix: 'adm1293', 'adm1294'
+ Addresses scanned: -
+ Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADM1293_1294.pdf
Author: Guenter Roeck <linux@roeck-us.net>
@@ -22,12 +26,12 @@ Description
-----------
This driver supports hardware montoring for Analog Devices ADM1075, ADM1275,
-and ADM1276 Hot-Swap Controller and Digital Power Monitor.
+ADM1276, ADM1293, and ADM1294 Hot-Swap Controller and Digital Power Monitors.
-ADM1075, ADM1275, and ADM1276 are hot-swap controllers that allow a circuit
-board to be removed from or inserted into a live backplane. They also feature
-current and voltage readback via an integrated 12-bit analog-to-digital
-converter (ADC), accessed using a PMBus interface.
+ADM1075, ADM1275, ADM1276, ADM1293, and ADM1294 are hot-swap controllers that
+allow a circuit board to be removed from or inserted into a live backplane.
+They also feature current and voltage readback via an integrated 12
+bit analog-to-digital converter (ADC), accessed using a PMBus interface.
The driver is a client driver to the core PMBus driver. Please see
Documentation/hwmon/pmbus for details on PMBus client drivers.
@@ -58,16 +62,16 @@ Sysfs entries
The following attributes are supported. Limits are read-write, history reset
attributes are write-only, all other attributes are read-only.
-in1_label "vin1" or "vout1" depending on chip variant and
- configuration. On ADM1075, vout1 reports the voltage on
- the VAUX pin.
-in1_input Measured voltage.
-in1_min Minimum Voltage.
-in1_max Maximum voltage.
-in1_min_alarm Voltage low alarm.
-in1_max_alarm Voltage high alarm.
-in1_highest Historical maximum voltage.
-in1_reset_history Write any value to reset history.
+inX_label "vin1" or "vout1" depending on chip variant and
+ configuration. On ADM1075, ADM1293, and ADM1294,
+ vout1 reports the voltage on the VAUX pin.
+inX_input Measured voltage.
+inX_min Minimum Voltage.
+inX_max Maximum voltage.
+inX_min_alarm Voltage low alarm.
+inX_max_alarm Voltage high alarm.
+inX_highest Historical maximum voltage.
+inX_reset_history Write any value to reset history.
curr1_label "iout1"
curr1_input Measured current.
@@ -86,7 +90,9 @@ curr1_reset_history Write any value to reset history.
power1_label "pin1"
power1_input Input power.
+power1_input_lowest Lowest observed input power. ADM1293 and ADM1294 only.
+power1_input_highest Highest observed input power.
power1_reset_history Write any value to reset history.
- Power attributes are supported on ADM1075 and ADM1276
- only.
+ Power attributes are supported on ADM1075, ADM1276,
+ ADM1293, and ADM1294.
diff --git a/Documentation/hwmon/fam15h_power b/Documentation/hwmon/fam15h_power
index 80654813d04a..e2b1b69eebea 100644
--- a/Documentation/hwmon/fam15h_power
+++ b/Documentation/hwmon/fam15h_power
@@ -3,12 +3,13 @@ Kernel driver fam15h_power
Supported chips:
* AMD Family 15h Processors
+* AMD Family 16h Processors
Prefix: 'fam15h_power'
Addresses scanned: PCI space
Datasheets:
BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors
- (not yet published)
+ BIOS and Kernel Developer's Guide (BKDG) For AMD Family 16h Processors
Author: Andreas Herrmann <herrmann.der.user@googlemail.com>
@@ -16,10 +17,11 @@ Description
-----------
This driver permits reading of registers providing power information
-of AMD Family 15h processors.
+of AMD Family 15h and 16h processors.
-For AMD Family 15h processors the following power values can be
-calculated using different processor northbridge function registers:
+For AMD Family 15h and 16h processors the following power values can
+be calculated using different processor northbridge function
+registers:
* BasePwrWatts: Specifies in watts the maximum amount of power
consumed by the processor for NB and logic external to the core.
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index e87294878334..733296d65449 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -38,6 +38,10 @@ Supported chips:
Prefix: 'it8728'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Not publicly available
+ * IT8732F
+ Prefix: 'it8732'
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+ Datasheet: Not publicly available
* IT8771E
Prefix: 'it8771'
Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -111,9 +115,9 @@ Description
-----------
This driver implements support for the IT8603E, IT8620E, IT8623E, IT8705F,
-IT8712F, IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
-IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, and SiS950
-chips.
+IT8712F, IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F,
+IT8758E, IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, and
+SiS950 chips.
These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
joysticks and other miscellaneous stuff. For hardware monitoring, they
@@ -137,10 +141,10 @@ The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E and later IT8712F revisions
have support for 2 additional fans. The additional fans are supported by the
driver.
-The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E, IT8781F, IT8782F, IT8783E/F,
-and late IT8712F and IT8705F also have optional 16-bit tachometer counters
-for fans 1 to 3. This is better (no more fan clock divider mess) but not
-compatible with the older chips and revisions. The 16-bit tachometer mode
+The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E, IT8732F, IT8781F, IT8782F,
+IT8783E/F, and late IT8712F and IT8705F also have optional 16-bit tachometer
+counters for fans 1 to 3. This is better (no more fan clock divider mess) but
+not compatible with the older chips and revisions. The 16-bit tachometer mode
is enabled by the driver when one of the above chips is detected.
The IT8726F is just bit enhanced IT8716F with additional hardware
@@ -159,6 +163,9 @@ IT8728F. It only supports 16-bit fan mode.
The IT8790E supports up to 3 fans. 16-bit fan mode is always enabled.
+The IT8732F supports a closed-loop mode for fan control, but this is not
+currently implemented by the driver.
+
Temperatures are measured in degrees Celsius. An alarm is triggered once
when the Overtemperature Shutdown limit is crossed.
@@ -173,12 +180,14 @@ is done.
Voltage sensors (also known as IN sensors) report their values in volts. An
alarm is triggered if the voltage has crossed a programmable minimum or
maximum limit. Note that minimum in this case always means 'closest to
-zero'; this is important for negative voltage measurements. All voltage
-inputs can measure voltages between 0 and 4.08 volts, with a resolution of
-0.016 volt (except IT8603E, IT8721F/IT8758E and IT8728F: 0.012 volt.) The
-battery voltage in8 does not have limit registers.
-
-On the IT8603E, IT8721F/IT8758E, IT8781F, IT8782F, and IT8783E/F, some
+zero'; this is important for negative voltage measurements. On most chips, all
+voltage inputs can measure voltages between 0 and 4.08 volts, with a resolution
+of 0.016 volt. IT8603E, IT8721F/IT8758E and IT8728F can measure between 0 and
+3.06 volts, with a resolution of 0.012 volt. IT8732F can measure between 0 and
+2.8 volts with a resolution of 0.0109 volt. The battery voltage in8 does not
+have limit registers.
+
+On the IT8603E, IT8721F/IT8758E, IT8732F, IT8781F, IT8782F, and IT8783E/F, some
voltage inputs are internal and scaled inside the chip:
* in3 (optional)
* in7 (optional for IT8781F, IT8782F, and IT8783E/F)
diff --git a/Documentation/hwmon/ltc2978 b/Documentation/hwmon/ltc2978
index 686c078bb0e0..9a49d3c90cd1 100644
--- a/Documentation/hwmon/ltc2978
+++ b/Documentation/hwmon/ltc2978
@@ -6,6 +6,10 @@ Supported chips:
Prefix: 'ltc2974'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltc2974
+ * Linear Technology LTC2975
+ Prefix: 'ltc2975'
+ Addresses scanned: -
+ Datasheet: http://www.linear.com/product/ltc2975
* Linear Technology LTC2977
Prefix: 'ltc2977'
Addresses scanned: -
@@ -15,14 +19,38 @@ Supported chips:
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltc2978
http://www.linear.com/product/ltc2978a
+ * Linear Technology LTC2980
+ Prefix: 'ltc2980'
+ Addresses scanned: -
+ Datasheet: http://www.linear.com/product/ltc2980
* Linear Technology LTC3880
Prefix: 'ltc3880'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltc3880
+ * Linear Technology LTC3882
+ Prefix: 'ltc3882'
+ Addresses scanned: -
+ Datasheet: http://www.linear.com/product/ltc3882
* Linear Technology LTC3883
Prefix: 'ltc3883'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltc3883
+ * Linear Technology LTC3886
+ Prefix: 'ltc3886'
+ Addresses scanned: -
+ Datasheet: http://www.linear.com/product/ltc3886
+ * Linear Technology LTC3887
+ Prefix: 'ltc3887'
+ Addresses scanned: -
+ Datasheet: http://www.linear.com/product/ltc3887
+ * Linear Technology LTM2987
+ Prefix: 'ltm2987'
+ Addresses scanned: -
+ Datasheet: http://www.linear.com/product/ltm2987
+ * Linear Technology LTM4675
+ Prefix: 'ltm4675'
+ Addresses scanned: -
+ Datasheet: http://www.linear.com/product/ltm4675
* Linear Technology LTM4676
Prefix: 'ltm4676'
Addresses scanned: -
@@ -34,11 +62,20 @@ Author: Guenter Roeck <linux@roeck-us.net>
Description
-----------
-LTC2974 is a quad digital power supply manager. LTC2978 is an octal power supply
-monitor. LTC2977 is a pin compatible replacement for LTC2978. LTC3880 is a dual
-output poly-phase step-down DC/DC controller. LTC3883 is a single phase
-step-down DC/DC controller. LTM4676 is a dual 13A or single 26A uModule
-regulator.
+LTC2974 and LTC2975 are quad digital power supply managers.
+LTC2978 is an octal power supply monitor.
+LTC2977 is a pin compatible replacement for LTC2978.
+LTC2980 is a 16-channel Power System Manager, consisting of two LTC2977
+in a single die. The chip is instantiated and reported as two separate chips
+on two different I2C bus addresses.
+LTC3880, LTC3882, LTC3886, and LTC3887 are dual output poly-phase step-down
+DC/DC controllers.
+LTC3883 is a single phase step-down DC/DC controller.
+LTM2987 is a 16-channel Power System Manager with two LTC2977 plus
+additional components on a single die. The chip is instantiated and reported
+as two separate chips on two different I2C bus addresses.
+LTM4675 is a dual 9A or single 18A μModule regulator
+LTM4676 is a dual 13A or single 26A uModule regulator.
Usage Notes
@@ -61,26 +98,32 @@ in1_label "vin"
in1_input Measured input voltage.
in1_min Minimum input voltage.
in1_max Maximum input voltage.
- LTC2974, LTC2977, and LTC2978 only.
+ LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
+ LTM2987 only.
in1_lcrit Critical minimum input voltage.
- LTC2974, LTC2977, and LTC2978 only.
+ LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
+ LTM2987 only.
in1_crit Critical maximum input voltage.
in1_min_alarm Input voltage low alarm.
in1_max_alarm Input voltage high alarm.
- LTC2974, LTC2977, and LTC2978 only.
+ LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
+ LTM2987 only.
in1_lcrit_alarm Input voltage critical low alarm.
- LTC2974, LTC2977, and LTC2978 only.
+ LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
+ LTM2987 only.
in1_crit_alarm Input voltage critical high alarm.
in1_lowest Lowest input voltage.
- LTC2974, LTC2977, and LTC2978 only.
+ LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
+ LTM2987 only.
in1_highest Highest input voltage.
in1_reset_history Reset input voltage history.
in[N]_label "vout[1-8]".
- LTC2974: N=2-5
- LTC2977: N=2-9
+ LTC2974, LTC2975: N=2-5
+ LTC2977, LTC2980, LTM2987: N=2-9
LTC2978: N=2-9
- LTC3880, LTM4676: N=2-3
+ LTC3880, LTC3882, LTC23886 LTC3887, LTM4675, LTM4676:
+ N=2-3
LTC3883: N=2
in[N]_input Measured output voltage.
in[N]_min Minimum output voltage.
@@ -91,67 +134,78 @@ in[N]_min_alarm Output voltage low alarm.
in[N]_max_alarm Output voltage high alarm.
in[N]_lcrit_alarm Output voltage critical low alarm.
in[N]_crit_alarm Output voltage critical high alarm.
-in[N]_lowest Lowest output voltage. LTC2974 and LTC2978 only.
+in[N]_lowest Lowest output voltage. LTC2974, LTC2975,
+ and LTC2978 only.
in[N]_highest Highest output voltage.
in[N]_reset_history Reset output voltage history.
temp[N]_input Measured temperature.
- On LTC2974, temp[1-4] report external temperatures,
- and temp5 reports the chip temperature.
- On LTC2977 and LTC2978, only one temperature measurement
- is supported and reports the chip temperature.
- On LTC3880 and LTM4676, temp1 and temp2 report external
- temperatures, and temp3 reports the chip temperature.
+ On LTC2974 and LTC2975, temp[1-4] report external
+ temperatures, and temp5 reports the chip temperature.
+ On LTC2977, LTC2980, LTC2978, and LTM2987, only one
+ temperature measurement is supported and reports
+ the chip temperature.
+ On LTC3880, LTC3882, LTC3887, LTM4675, and LTM4676,
+ temp1 and temp2 report external temperatures, and temp3
+ reports the chip temperature.
On LTC3883, temp1 reports an external temperature,
and temp2 reports the chip temperature.
-temp[N]_min Mimimum temperature. LTC2974, LCT2977, and LTC2978 only.
+temp[N]_min Mimimum temperature. LTC2974, LCT2977, LTM2980, LTC2978,
+ and LTM2987 only.
temp[N]_max Maximum temperature.
temp[N]_lcrit Critical low temperature.
temp[N]_crit Critical high temperature.
temp[N]_min_alarm Temperature low alarm.
- LTC2974, LTC2977, and LTC2978 only.
+ LTC2974, LTC2975, LTC2977, LTM2980, LTC2978, and
+ LTM2987 only.
temp[N]_max_alarm Temperature high alarm.
temp[N]_lcrit_alarm Temperature critical low alarm.
temp[N]_crit_alarm Temperature critical high alarm.
temp[N]_lowest Lowest measured temperature.
- LTC2974, LTC2977, and LTC2978 only.
- Not supported for chip temperature sensor on LTC2974.
+ LTC2974, LTC2975, LTC2977, LTM2980, LTC2978, and
+ LTM2987 only.
+ Not supported for chip temperature sensor on LTC2974 and
+ LTC2975.
temp[N]_highest Highest measured temperature. Not supported for chip
- temperature sensor on LTC2974.
+ temperature sensor on LTC2974 and LTC2975.
temp[N]_reset_history Reset temperature history. Not supported for chip
- temperature sensor on LTC2974.
+ temperature sensor on LTC2974 and LTC2975.
-power1_label "pin". LTC3883 only.
+power1_label "pin". LTC3883 and LTC3886 only.
power1_input Measured input power.
power[N]_label "pout[1-4]".
- LTC2974: N=1-4
- LTC2977: Not supported
+ LTC2974, LTC2975: N=1-4
+ LTC2977, LTC2980, LTM2987: Not supported
LTC2978: Not supported
- LTC3880, LTM4676: N=1-2
+ LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676:
+ N=1-2
LTC3883: N=2
power[N]_input Measured output power.
-curr1_label "iin". LTC3880, LTC3883, and LTM4676 only.
+curr1_label "iin". LTC3880, LTC3883, LTC3886, LTC3887, LTM4675,
+ and LTM4676 only.
curr1_input Measured input current.
curr1_max Maximum input current.
curr1_max_alarm Input current high alarm.
-curr1_highest Highest input current. LTC3883 only.
-curr1_reset_history Reset input current history. LTC3883 only.
+curr1_highest Highest input current. LTC3883 and LTC3886 only.
+curr1_reset_history Reset input current history. LTC3883 and LTC3886 only.
curr[N]_label "iout[1-4]".
- LTC2974: N=1-4
- LTC2977: not supported
+ LTC2974, LTC2975: N=1-4
+ LTC2977, LTC2980, LTM2987: not supported
LTC2978: not supported
- LTC3880, LTM4676: N=2-3
+ LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676:
+ N=2-3
LTC3883: N=2
curr[N]_input Measured output current.
curr[N]_max Maximum output current.
curr[N]_crit Critical high output current.
-curr[N]_lcrit Critical low output current. LTC2974 only.
+curr[N]_lcrit Critical low output current. LTC2974 and LTC2975 only.
curr[N]_max_alarm Output current high alarm.
curr[N]_crit_alarm Output current critical high alarm.
-curr[N]_lcrit_alarm Output current critical low alarm. LTC2974 only.
-curr[N]_lowest Lowest output current. LTC2974 only.
+curr[N]_lcrit_alarm Output current critical low alarm.
+ LTC2974 and LTC2975 only.
+curr[N]_lowest Lowest output current. LTC2974 and LTC2975 only.
curr[N]_highest Highest output current.
curr[N]_reset_history Reset output current history.
diff --git a/Documentation/hwmon/max20751 b/Documentation/hwmon/max20751
new file mode 100644
index 000000000000..f9fa25ebb521
--- /dev/null
+++ b/Documentation/hwmon/max20751
@@ -0,0 +1,77 @@
+Kernel driver max20751
+======================
+
+Supported chips:
+ * maxim MAX20751
+ Prefix: 'max20751'
+ Addresses scanned: -
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX20751.pdf
+ Application note: http://pdfserv.maximintegrated.com/en/an/AN5941.pdf
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+This driver supports MAX20751 Multiphase Master with PMBus Interface
+and Internal Buck Converter.
+
+The driver is a client driver to the core PMBus driver.
+Please see Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported.
+
+in1_label "vin1"
+in1_input Measured voltage.
+in1_min Minimum input voltage.
+in1_max Maximum input voltage.
+in1_lcrit Critical minimum input voltage.
+in1_crit Critical maximum input voltage.
+in1_min_alarm Input voltage low alarm.
+in1_lcrit_alarm Input voltage critical low alarm.
+in1_min_alarm Input voltage low alarm.
+in1_max_alarm Input voltage high alarm.
+
+in2_label "vout1"
+in2_input Measured voltage.
+in2_min Minimum output voltage.
+in2_max Maximum output voltage.
+in2_lcrit Critical minimum output voltage.
+in2_crit Critical maximum output voltage.
+in2_min_alarm Output voltage low alarm.
+in2_lcrit_alarm Output voltage critical low alarm.
+in2_min_alarm Output voltage low alarm.
+in2_max_alarm Output voltage high alarm.
+
+curr1_input Measured output current.
+curr1_label "iout1"
+curr1_max Maximum output current.
+curr1_alarm Current high alarm.
+
+temp1_input Measured temperature.
+temp1_max Maximum temperature.
+temp1_crit Critical high temperature.
+temp1_max_alarm Chip temperature high alarm.
+temp1_crit_alarm Chip temperature critical high alarm.
+
+power1_input Output power.
+power1_label "pout1"
diff --git a/Documentation/hwmon/nct7802 b/Documentation/hwmon/nct7802
index 2e00f5e344bc..5438deb6be02 100644
--- a/Documentation/hwmon/nct7802
+++ b/Documentation/hwmon/nct7802
@@ -17,8 +17,7 @@ This driver implements support for the Nuvoton NCT7802Y hardware monitoring
chip. NCT7802Y supports 6 temperature sensors, 5 voltage sensors, and 3 fan
speed sensors.
-The chip also supports intelligent fan speed control. This functionality is
-not currently supported by the driver.
+Smart Fanâ„¢ speed control is available via pwmX_auto_point attributes.
Tested Boards and BIOS Versions
-------------------------------
diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus
index a3557da8f5b4..b397675e876d 100644
--- a/Documentation/hwmon/pmbus
+++ b/Documentation/hwmon/pmbus
@@ -23,11 +23,15 @@ Supported chips:
http://www.lineagepower.com/oem/pdf/PDT012A0X.pdf
http://www.lineagepower.com/oem/pdf/UDT020A0X.pdf
http://www.lineagepower.com/oem/pdf/MDT040A0X.pdf
- * Texas Instruments TPS40400
- Prefixes: 'tps40400'
+ * Texas Instruments TPS40400, TPS544B20, TPS544B25, TPS544C20, TPS544C25
+ Prefixes: 'tps40400', 'tps544b20', 'tps544b25', 'tps544c20', 'tps544c25'
Addresses scanned: -
Datasheets:
http://www.ti.com/lit/gpn/tps40400
+ http://www.ti.com/lit/gpn/tps544b20
+ http://www.ti.com/lit/gpn/tps544b25
+ http://www.ti.com/lit/gpn/tps544c20
+ http://www.ti.com/lit/gpn/tps544c25
* Generic PMBus devices
Prefix: 'pmbus'
Addresses scanned: -
diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt
index c86f2f1ae4f6..1fec1135791d 100644
--- a/Documentation/input/alps.txt
+++ b/Documentation/input/alps.txt
@@ -119,8 +119,10 @@ ALPS Absolute Mode - Protocol Version 2
byte 5: 0 z6 z5 z4 z3 z2 z1 z0
Protocol Version 2 DualPoint devices send standard PS/2 mouse packets for
-the DualPoint Stick. For non interleaved dualpoint devices the pointingstick
-buttons get reported separately in the PSM, PSR and PSL bits.
+the DualPoint Stick. The M, R and L bits signal the combined status of both
+the pointingstick and touchpad buttons, except for Dell dualpoint devices
+where the pointingstick buttons get reported separately in the PSM, PSR
+and PSL bits.
Dualpoint device -- interleaved packet format
---------------------------------------------
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 611c52267d24..64df08db4657 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -124,6 +124,8 @@ Code Seq#(hex) Include File Comments
'H' 00-7F linux/hiddev.h conflict!
'H' 00-0F linux/hidraw.h conflict!
'H' 01 linux/mei.h conflict!
+'H' 02 linux/mei.h conflict!
+'H' 03 linux/mei.h conflict!
'H' 00-0F sound/asound.h conflict!
'H' 20-40 sound/asound_fm.h conflict!
'H' 80-8F sound/sfnt_info.h conflict!
@@ -314,6 +316,7 @@ Code Seq#(hex) Include File Comments
0xB3 00 linux/mmc/ioctl.h
0xC0 00-0F linux/usb/iowarrior.h
0xCA 00-0F uapi/misc/cxl.h
+0xCA 80-8F uapi/scsi/cxlflash_ioctl.h
0xCB 00-1F CBM serial IEC bus in development:
<mailto:michael.klein@puffin.lb.shuttle.de>
0xCD 01 linux/reiserfs_fs.h
diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt
index acbc1a3d0d91..78f69cdc9b3f 100644
--- a/Documentation/kernel-doc-nano-HOWTO.txt
+++ b/Documentation/kernel-doc-nano-HOWTO.txt
@@ -128,7 +128,7 @@ are:
special place-holders for where the extracted documentation should
go.
-- scripts/basic/docproc.c
+- scripts/docproc.c
This is a program for converting SGML template files into SGML
files. When a file is referenced it is searched for symbols
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 1d6f0459cd7b..b09dc2c05fdf 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -910,6 +910,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
Disable PIN 1 of APIC timer
Can be useful to work around chipset bugs.
+ dis_ucode_ldr [X86] Disable the microcode loader.
+
dma_debug=off If the kernel is compiled with DMA_API_DEBUG support,
this option disables the debugging code at boot.
@@ -3135,22 +3137,35 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
in a given burst of a callback-flood test.
rcutorture.fqs_duration= [KNL]
- Set duration of force_quiescent_state bursts.
+ Set duration of force_quiescent_state bursts
+ in microseconds.
rcutorture.fqs_holdoff= [KNL]
- Set holdoff time within force_quiescent_state bursts.
+ Set holdoff time within force_quiescent_state bursts
+ in microseconds.
rcutorture.fqs_stutter= [KNL]
- Set wait time between force_quiescent_state bursts.
+ Set wait time between force_quiescent_state bursts
+ in seconds.
+
+ rcutorture.gp_cond= [KNL]
+ Use conditional/asynchronous update-side
+ primitives, if available.
rcutorture.gp_exp= [KNL]
- Use expedited update-side primitives.
+ Use expedited update-side primitives, if available.
rcutorture.gp_normal= [KNL]
- Use normal (non-expedited) update-side primitives.
- If both gp_exp and gp_normal are set, do both.
- If neither gp_exp nor gp_normal are set, still
- do both.
+ Use normal (non-expedited) asynchronous
+ update-side primitives, if available.
+
+ rcutorture.gp_sync= [KNL]
+ Use normal (non-expedited) synchronous
+ update-side primitives, if available. If all
+ of rcutorture.gp_cond=, rcutorture.gp_exp=,
+ rcutorture.gp_normal=, and rcutorture.gp_sync=
+ are zero, rcutorture acts as if is interpreted
+ they are all non-zero.
rcutorture.n_barrier_cbs= [KNL]
Set callbacks/threads for rcu_barrier() testing.
@@ -3177,9 +3192,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
Set time (s) between CPU-hotplug operations, or
zero to disable CPU-hotplug testing.
- rcutorture.torture_runnable= [BOOT]
- Start rcutorture running at boot time.
-
rcutorture.shuffle_interval= [KNL]
Set task-shuffle interval (s). Shuffling tasks
allows some CPUs to go into dyntick-idle mode
@@ -3220,6 +3232,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
Test RCU's dyntick-idle handling. See also the
rcutorture.shuffle_interval parameter.
+ rcutorture.torture_runnable= [BOOT]
+ Start rcutorture running at boot time.
+
rcutorture.torture_type= [KNL]
Specify the RCU implementation to test.
diff --git a/Documentation/mailbox.txt b/Documentation/mailbox.txt
index 1092ad9578da..7ed371c85204 100644
--- a/Documentation/mailbox.txt
+++ b/Documentation/mailbox.txt
@@ -51,8 +51,7 @@ struct demo_client {
*/
static void message_from_remote(struct mbox_client *cl, void *mssg)
{
- struct demo_client *dc = container_of(mbox_client,
- struct demo_client, cl);
+ struct demo_client *dc = container_of(cl, struct demo_client, cl);
if (dc->async) {
if (is_an_ack(mssg)) {
/* An ACK to our last sample sent */
@@ -68,8 +67,7 @@ static void message_from_remote(struct mbox_client *cl, void *mssg)
static void sample_sent(struct mbox_client *cl, void *mssg, int r)
{
- struct demo_client *dc = container_of(mbox_client,
- struct demo_client, cl);
+ struct demo_client *dc = container_of(cl, struct demo_client, cl);
complete(&dc->c);
}
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index 13feb697271f..eafa6a53f72c 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -194,22 +194,22 @@ There are some minimal guarantees that may be expected of a CPU:
(*) On any given CPU, dependent memory accesses will be issued in order, with
respect to itself. This means that for:
- ACCESS_ONCE(Q) = P; smp_read_barrier_depends(); D = ACCESS_ONCE(*Q);
+ WRITE_ONCE(Q, P); smp_read_barrier_depends(); D = READ_ONCE(*Q);
the CPU will issue the following memory operations:
Q = LOAD P, D = LOAD *Q
and always in that order. On most systems, smp_read_barrier_depends()
- does nothing, but it is required for DEC Alpha. The ACCESS_ONCE()
- is required to prevent compiler mischief. Please note that you
- should normally use something like rcu_dereference() instead of
- open-coding smp_read_barrier_depends().
+ does nothing, but it is required for DEC Alpha. The READ_ONCE()
+ and WRITE_ONCE() are required to prevent compiler mischief. Please
+ note that you should normally use something like rcu_dereference()
+ instead of open-coding smp_read_barrier_depends().
(*) Overlapping loads and stores within a particular CPU will appear to be
ordered within that CPU. This means that for:
- a = ACCESS_ONCE(*X); ACCESS_ONCE(*X) = b;
+ a = READ_ONCE(*X); WRITE_ONCE(*X, b);
the CPU will only issue the following sequence of memory operations:
@@ -217,7 +217,7 @@ There are some minimal guarantees that may be expected of a CPU:
And for:
- ACCESS_ONCE(*X) = c; d = ACCESS_ONCE(*X);
+ WRITE_ONCE(*X, c); d = READ_ONCE(*X);
the CPU will only issue:
@@ -228,11 +228,11 @@ There are some minimal guarantees that may be expected of a CPU:
And there are a number of things that _must_ or _must_not_ be assumed:
- (*) It _must_not_ be assumed that the compiler will do what you want with
- memory references that are not protected by ACCESS_ONCE(). Without
- ACCESS_ONCE(), the compiler is within its rights to do all sorts
- of "creative" transformations, which are covered in the Compiler
- Barrier section.
+ (*) It _must_not_ be assumed that the compiler will do what you want
+ with memory references that are not protected by READ_ONCE() and
+ WRITE_ONCE(). Without them, the compiler is within its rights to
+ do all sorts of "creative" transformations, which are covered in
+ the Compiler Barrier section.
(*) It _must_not_ be assumed that independent loads and stores will be issued
in the order given. This means that for:
@@ -520,8 +520,8 @@ following sequence of events:
{ A == 1, B == 2, C = 3, P == &A, Q == &C }
B = 4;
<write barrier>
- ACCESS_ONCE(P) = &B
- Q = ACCESS_ONCE(P);
+ WRITE_ONCE(P, &B)
+ Q = READ_ONCE(P);
D = *Q;
There's a clear data dependency here, and it would seem that by the end of the
@@ -547,8 +547,8 @@ between the address load and the data load:
{ A == 1, B == 2, C = 3, P == &A, Q == &C }
B = 4;
<write barrier>
- ACCESS_ONCE(P) = &B
- Q = ACCESS_ONCE(P);
+ WRITE_ONCE(P, &B);
+ Q = READ_ONCE(P);
<data dependency barrier>
D = *Q;
@@ -574,8 +574,8 @@ access:
{ M[0] == 1, M[1] == 2, M[3] = 3, P == 0, Q == 3 }
M[1] = 4;
<write barrier>
- ACCESS_ONCE(P) = 1
- Q = ACCESS_ONCE(P);
+ WRITE_ONCE(P, 1);
+ Q = READ_ONCE(P);
<data dependency barrier>
D = M[Q];
@@ -596,10 +596,10 @@ A load-load control dependency requires a full read memory barrier, not
simply a data dependency barrier to make it work correctly. Consider the
following bit of code:
- q = ACCESS_ONCE(a);
+ q = READ_ONCE(a);
if (q) {
<data dependency barrier> /* BUG: No data dependency!!! */
- p = ACCESS_ONCE(b);
+ p = READ_ONCE(b);
}
This will not have the desired effect because there is no actual data
@@ -608,10 +608,10 @@ by attempting to predict the outcome in advance, so that other CPUs see
the load from b as having happened before the load from a. In such a
case what's actually required is:
- q = ACCESS_ONCE(a);
+ q = READ_ONCE(a);
if (q) {
<read barrier>
- p = ACCESS_ONCE(b);
+ p = READ_ONCE(b);
}
However, stores are not speculated. This means that ordering -is- provided
@@ -619,7 +619,7 @@ for load-store control dependencies, as in the following example:
q = READ_ONCE_CTRL(a);
if (q) {
- ACCESS_ONCE(b) = p;
+ WRITE_ONCE(b, p);
}
Control dependencies pair normally with other types of barriers. That
@@ -647,11 +647,11 @@ branches of the "if" statement as follows:
q = READ_ONCE_CTRL(a);
if (q) {
barrier();
- ACCESS_ONCE(b) = p;
+ WRITE_ONCE(b, p);
do_something();
} else {
barrier();
- ACCESS_ONCE(b) = p;
+ WRITE_ONCE(b, p);
do_something_else();
}
@@ -660,12 +660,12 @@ optimization levels:
q = READ_ONCE_CTRL(a);
barrier();
- ACCESS_ONCE(b) = p; /* BUG: No ordering vs. load from a!!! */
+ WRITE_ONCE(b, p); /* BUG: No ordering vs. load from a!!! */
if (q) {
- /* ACCESS_ONCE(b) = p; -- moved up, BUG!!! */
+ /* WRITE_ONCE(b, p); -- moved up, BUG!!! */
do_something();
} else {
- /* ACCESS_ONCE(b) = p; -- moved up, BUG!!! */
+ /* WRITE_ONCE(b, p); -- moved up, BUG!!! */
do_something_else();
}
@@ -676,7 +676,7 @@ assembly code even after all compiler optimizations have been applied.
Therefore, if you need ordering in this example, you need explicit
memory barriers, for example, smp_store_release():
- q = ACCESS_ONCE(a);
+ q = READ_ONCE(a);
if (q) {
smp_store_release(&b, p);
do_something();
@@ -690,10 +690,10 @@ ordering is guaranteed only when the stores differ, for example:
q = READ_ONCE_CTRL(a);
if (q) {
- ACCESS_ONCE(b) = p;
+ WRITE_ONCE(b, p);
do_something();
} else {
- ACCESS_ONCE(b) = r;
+ WRITE_ONCE(b, r);
do_something_else();
}
@@ -706,10 +706,10 @@ the needed conditional. For example:
q = READ_ONCE_CTRL(a);
if (q % MAX) {
- ACCESS_ONCE(b) = p;
+ WRITE_ONCE(b, p);
do_something();
} else {
- ACCESS_ONCE(b) = r;
+ WRITE_ONCE(b, r);
do_something_else();
}
@@ -718,7 +718,7 @@ equal to zero, in which case the compiler is within its rights to
transform the above code into the following:
q = READ_ONCE_CTRL(a);
- ACCESS_ONCE(b) = p;
+ WRITE_ONCE(b, p);
do_something_else();
Given this transformation, the CPU is not required to respect the ordering
@@ -731,10 +731,10 @@ one, perhaps as follows:
q = READ_ONCE_CTRL(a);
BUILD_BUG_ON(MAX <= 1); /* Order load from a with store to b. */
if (q % MAX) {
- ACCESS_ONCE(b) = p;
+ WRITE_ONCE(b, p);
do_something();
} else {
- ACCESS_ONCE(b) = r;
+ WRITE_ONCE(b, r);
do_something_else();
}
@@ -746,18 +746,18 @@ You must also be careful not to rely too much on boolean short-circuit
evaluation. Consider this example:
q = READ_ONCE_CTRL(a);
- if (a || 1 > 0)
- ACCESS_ONCE(b) = 1;
+ if (q || 1 > 0)
+ WRITE_ONCE(b, 1);
Because the first condition cannot fault and the second condition is
always true, the compiler can transform this example as following,
defeating control dependency:
q = READ_ONCE_CTRL(a);
- ACCESS_ONCE(b) = 1;
+ WRITE_ONCE(b, 1);
This example underscores the need to ensure that the compiler cannot
-out-guess your code. More generally, although ACCESS_ONCE() does force
+out-guess your code. More generally, although READ_ONCE() does force
the compiler to actually emit code for a given load, it does not force
the compiler to use the results.
@@ -769,7 +769,7 @@ x and y both being zero:
======================= =======================
r1 = READ_ONCE_CTRL(x); r2 = READ_ONCE_CTRL(y);
if (r1 > 0) if (r2 > 0)
- ACCESS_ONCE(y) = 1; ACCESS_ONCE(x) = 1;
+ WRITE_ONCE(y, 1); WRITE_ONCE(x, 1);
assert(!(r1 == 1 && r2 == 1));
@@ -779,7 +779,7 @@ then adding the following CPU would guarantee a related assertion:
CPU 2
=====================
- ACCESS_ONCE(x) = 2;
+ WRITE_ONCE(x, 2);
assert(!(r1 == 2 && r2 == 1 && x == 2)); /* FAILS!!! */
@@ -798,8 +798,7 @@ In summary:
(*) Control dependencies must be headed by READ_ONCE_CTRL().
Or, as a much less preferable alternative, interpose
- be headed by READ_ONCE() or an ACCESS_ONCE() read and must
- have smp_read_barrier_depends() between this read and the
+ smp_read_barrier_depends() between a READ_ONCE() and the
control-dependent write.
(*) Control dependencies can order prior loads against later stores.
@@ -815,15 +814,16 @@ In summary:
(*) Control dependencies require at least one run-time conditional
between the prior load and the subsequent store, and this
- conditional must involve the prior load. If the compiler
- is able to optimize the conditional away, it will have also
- optimized away the ordering. Careful use of ACCESS_ONCE() can
- help to preserve the needed conditional.
+ conditional must involve the prior load. If the compiler is able
+ to optimize the conditional away, it will have also optimized
+ away the ordering. Careful use of READ_ONCE_CTRL() READ_ONCE(),
+ and WRITE_ONCE() can help to preserve the needed conditional.
(*) Control dependencies require that the compiler avoid reordering the
- dependency into nonexistence. Careful use of ACCESS_ONCE() or
- barrier() can help to preserve your control dependency. Please
- see the Compiler Barrier section for more information.
+ dependency into nonexistence. Careful use of READ_ONCE_CTRL()
+ or smp_read_barrier_depends() can help to preserve your control
+ dependency. Please see the Compiler Barrier section for more
+ information.
(*) Control dependencies pair normally with other types of barriers.
@@ -848,11 +848,11 @@ barrier, an acquire barrier, a release barrier, or a general barrier:
CPU 1 CPU 2
=============== ===============
- ACCESS_ONCE(a) = 1;
+ WRITE_ONCE(a, 1);
<write barrier>
- ACCESS_ONCE(b) = 2; x = ACCESS_ONCE(b);
+ WRITE_ONCE(b, 2); x = READ_ONCE(b);
<read barrier>
- y = ACCESS_ONCE(a);
+ y = READ_ONCE(a);
Or:
@@ -860,7 +860,7 @@ Or:
=============== ===============================
a = 1;
<write barrier>
- ACCESS_ONCE(b) = &a; x = ACCESS_ONCE(b);
+ WRITE_ONCE(b, &a); x = READ_ONCE(b);
<data dependency barrier>
y = *x;
@@ -868,11 +868,11 @@ Or even:
CPU 1 CPU 2
=============== ===============================
- r1 = ACCESS_ONCE(y);
+ r1 = READ_ONCE(y);
<general barrier>
- ACCESS_ONCE(y) = 1; if (r2 = ACCESS_ONCE(x)) {
+ WRITE_ONCE(y, 1); if (r2 = READ_ONCE(x)) {
<implicit control dependency>
- ACCESS_ONCE(y) = 1;
+ WRITE_ONCE(y, 1);
}
assert(r1 == 0 || r2 == 0);
@@ -886,11 +886,11 @@ versa:
CPU 1 CPU 2
=================== ===================
- ACCESS_ONCE(a) = 1; }---- --->{ v = ACCESS_ONCE(c);
- ACCESS_ONCE(b) = 2; } \ / { w = ACCESS_ONCE(d);
+ WRITE_ONCE(a, 1); }---- --->{ v = READ_ONCE(c);
+ WRITE_ONCE(b, 2); } \ / { w = READ_ONCE(d);
<write barrier> \ <read barrier>
- ACCESS_ONCE(c) = 3; } / \ { x = ACCESS_ONCE(a);
- ACCESS_ONCE(d) = 4; }---- --->{ y = ACCESS_ONCE(b);
+ WRITE_ONCE(c, 3); } / \ { x = READ_ONCE(a);
+ WRITE_ONCE(d, 4); }---- --->{ y = READ_ONCE(b);
EXAMPLES OF MEMORY BARRIER SEQUENCES
@@ -1340,10 +1340,10 @@ compiler from moving the memory accesses either side of it to the other side:
barrier();
-This is a general barrier -- there are no read-read or write-write variants
-of barrier(). However, ACCESS_ONCE() can be thought of as a weak form
-for barrier() that affects only the specific accesses flagged by the
-ACCESS_ONCE().
+This is a general barrier -- there are no read-read or write-write
+variants of barrier(). However, READ_ONCE() and WRITE_ONCE() can be
+thought of as weak forms of barrier() that affect only the specific
+accesses flagged by the READ_ONCE() or WRITE_ONCE().
The barrier() function has the following effects:
@@ -1355,9 +1355,10 @@ The barrier() function has the following effects:
(*) Within a loop, forces the compiler to load the variables used
in that loop's conditional on each pass through that loop.
-The ACCESS_ONCE() function can prevent any number of optimizations that,
-while perfectly safe in single-threaded code, can be fatal in concurrent
-code. Here are some examples of these sorts of optimizations:
+The READ_ONCE() and WRITE_ONCE() functions can prevent any number of
+optimizations that, while perfectly safe in single-threaded code, can
+be fatal in concurrent code. Here are some examples of these sorts
+of optimizations:
(*) The compiler is within its rights to reorder loads and stores
to the same variable, and in some cases, the CPU is within its
@@ -1370,11 +1371,11 @@ code. Here are some examples of these sorts of optimizations:
Might result in an older value of x stored in a[1] than in a[0].
Prevent both the compiler and the CPU from doing this as follows:
- a[0] = ACCESS_ONCE(x);
- a[1] = ACCESS_ONCE(x);
+ a[0] = READ_ONCE(x);
+ a[1] = READ_ONCE(x);
- In short, ACCESS_ONCE() provides cache coherence for accesses from
- multiple CPUs to a single variable.
+ In short, READ_ONCE() and WRITE_ONCE() provide cache coherence for
+ accesses from multiple CPUs to a single variable.
(*) The compiler is within its rights to merge successive loads from
the same variable. Such merging can cause the compiler to "optimize"
@@ -1391,9 +1392,9 @@ code. Here are some examples of these sorts of optimizations:
for (;;)
do_something_with(tmp);
- Use ACCESS_ONCE() to prevent the compiler from doing this to you:
+ Use READ_ONCE() to prevent the compiler from doing this to you:
- while (tmp = ACCESS_ONCE(a))
+ while (tmp = READ_ONCE(a))
do_something_with(tmp);
(*) The compiler is within its rights to reload a variable, for example,
@@ -1415,9 +1416,9 @@ code. Here are some examples of these sorts of optimizations:
a was modified by some other CPU between the "while" statement and
the call to do_something_with().
- Again, use ACCESS_ONCE() to prevent the compiler from doing this:
+ Again, use READ_ONCE() to prevent the compiler from doing this:
- while (tmp = ACCESS_ONCE(a))
+ while (tmp = READ_ONCE(a))
do_something_with(tmp);
Note that if the compiler runs short of registers, it might save
@@ -1437,21 +1438,21 @@ code. Here are some examples of these sorts of optimizations:
do { } while (0);
- This transformation is a win for single-threaded code because it gets
- rid of a load and a branch. The problem is that the compiler will
- carry out its proof assuming that the current CPU is the only one
- updating variable 'a'. If variable 'a' is shared, then the compiler's
- proof will be erroneous. Use ACCESS_ONCE() to tell the compiler
- that it doesn't know as much as it thinks it does:
+ This transformation is a win for single-threaded code because it
+ gets rid of a load and a branch. The problem is that the compiler
+ will carry out its proof assuming that the current CPU is the only
+ one updating variable 'a'. If variable 'a' is shared, then the
+ compiler's proof will be erroneous. Use READ_ONCE() to tell the
+ compiler that it doesn't know as much as it thinks it does:
- while (tmp = ACCESS_ONCE(a))
+ while (tmp = READ_ONCE(a))
do_something_with(tmp);
But please note that the compiler is also closely watching what you
- do with the value after the ACCESS_ONCE(). For example, suppose you
+ do with the value after the READ_ONCE(). For example, suppose you
do the following and MAX is a preprocessor macro with the value 1:
- while ((tmp = ACCESS_ONCE(a)) % MAX)
+ while ((tmp = READ_ONCE(a)) % MAX)
do_something_with(tmp);
Then the compiler knows that the result of the "%" operator applied
@@ -1475,12 +1476,12 @@ code. Here are some examples of these sorts of optimizations:
surprise if some other CPU might have stored to variable 'a' in the
meantime.
- Use ACCESS_ONCE() to prevent the compiler from making this sort of
+ Use WRITE_ONCE() to prevent the compiler from making this sort of
wrong guess:
- ACCESS_ONCE(a) = 0;
+ WRITE_ONCE(a, 0);
/* Code that does not store to variable a. */
- ACCESS_ONCE(a) = 0;
+ WRITE_ONCE(a, 0);
(*) The compiler is within its rights to reorder memory accesses unless
you tell it not to. For example, consider the following interaction
@@ -1509,40 +1510,43 @@ code. Here are some examples of these sorts of optimizations:
}
If the interrupt occurs between these two statement, then
- interrupt_handler() might be passed a garbled msg. Use ACCESS_ONCE()
+ interrupt_handler() might be passed a garbled msg. Use WRITE_ONCE()
to prevent this as follows:
void process_level(void)
{
- ACCESS_ONCE(msg) = get_message();
- ACCESS_ONCE(flag) = true;
+ WRITE_ONCE(msg, get_message());
+ WRITE_ONCE(flag, true);
}
void interrupt_handler(void)
{
- if (ACCESS_ONCE(flag))
- process_message(ACCESS_ONCE(msg));
+ if (READ_ONCE(flag))
+ process_message(READ_ONCE(msg));
}
- Note that the ACCESS_ONCE() wrappers in interrupt_handler()
- are needed if this interrupt handler can itself be interrupted
- by something that also accesses 'flag' and 'msg', for example,
- a nested interrupt or an NMI. Otherwise, ACCESS_ONCE() is not
- needed in interrupt_handler() other than for documentation purposes.
- (Note also that nested interrupts do not typically occur in modern
- Linux kernels, in fact, if an interrupt handler returns with
- interrupts enabled, you will get a WARN_ONCE() splat.)
-
- You should assume that the compiler can move ACCESS_ONCE() past
- code not containing ACCESS_ONCE(), barrier(), or similar primitives.
-
- This effect could also be achieved using barrier(), but ACCESS_ONCE()
- is more selective: With ACCESS_ONCE(), the compiler need only forget
- the contents of the indicated memory locations, while with barrier()
- the compiler must discard the value of all memory locations that
- it has currented cached in any machine registers. Of course,
- the compiler must also respect the order in which the ACCESS_ONCE()s
- occur, though the CPU of course need not do so.
+ Note that the READ_ONCE() and WRITE_ONCE() wrappers in
+ interrupt_handler() are needed if this interrupt handler can itself
+ be interrupted by something that also accesses 'flag' and 'msg',
+ for example, a nested interrupt or an NMI. Otherwise, READ_ONCE()
+ and WRITE_ONCE() are not needed in interrupt_handler() other than
+ for documentation purposes. (Note also that nested interrupts
+ do not typically occur in modern Linux kernels, in fact, if an
+ interrupt handler returns with interrupts enabled, you will get a
+ WARN_ONCE() splat.)
+
+ You should assume that the compiler can move READ_ONCE() and
+ WRITE_ONCE() past code not containing READ_ONCE(), WRITE_ONCE(),
+ barrier(), or similar primitives.
+
+ This effect could also be achieved using barrier(), but READ_ONCE()
+ and WRITE_ONCE() are more selective: With READ_ONCE() and
+ WRITE_ONCE(), the compiler need only forget the contents of the
+ indicated memory locations, while with barrier() the compiler must
+ discard the value of all memory locations that it has currented
+ cached in any machine registers. Of course, the compiler must also
+ respect the order in which the READ_ONCE()s and WRITE_ONCE()s occur,
+ though the CPU of course need not do so.
(*) The compiler is within its rights to invent stores to a variable,
as in the following example:
@@ -1562,16 +1566,16 @@ code. Here are some examples of these sorts of optimizations:
a branch. Unfortunately, in concurrent code, this optimization
could cause some other CPU to see a spurious value of 42 -- even
if variable 'a' was never zero -- when loading variable 'b'.
- Use ACCESS_ONCE() to prevent this as follows:
+ Use WRITE_ONCE() to prevent this as follows:
if (a)
- ACCESS_ONCE(b) = a;
+ WRITE_ONCE(b, a);
else
- ACCESS_ONCE(b) = 42;
+ WRITE_ONCE(b, 42);
The compiler can also invent loads. These are usually less
damaging, but they can result in cache-line bouncing and thus in
- poor performance and scalability. Use ACCESS_ONCE() to prevent
+ poor performance and scalability. Use READ_ONCE() to prevent
invented loads.
(*) For aligned memory locations whose size allows them to be accessed
@@ -1590,9 +1594,9 @@ code. Here are some examples of these sorts of optimizations:
This optimization can therefore be a win in single-threaded code.
In fact, a recent bug (since fixed) caused GCC to incorrectly use
this optimization in a volatile store. In the absence of such bugs,
- use of ACCESS_ONCE() prevents store tearing in the following example:
+ use of WRITE_ONCE() prevents store tearing in the following example:
- ACCESS_ONCE(p) = 0x00010002;
+ WRITE_ONCE(p, 0x00010002);
Use of packed structures can also result in load and store tearing,
as in this example:
@@ -1609,22 +1613,23 @@ code. Here are some examples of these sorts of optimizations:
foo2.b = foo1.b;
foo2.c = foo1.c;
- Because there are no ACCESS_ONCE() wrappers and no volatile markings,
- the compiler would be well within its rights to implement these three
- assignment statements as a pair of 32-bit loads followed by a pair
- of 32-bit stores. This would result in load tearing on 'foo1.b'
- and store tearing on 'foo2.b'. ACCESS_ONCE() again prevents tearing
- in this example:
+ Because there are no READ_ONCE() or WRITE_ONCE() wrappers and no
+ volatile markings, the compiler would be well within its rights to
+ implement these three assignment statements as a pair of 32-bit
+ loads followed by a pair of 32-bit stores. This would result in
+ load tearing on 'foo1.b' and store tearing on 'foo2.b'. READ_ONCE()
+ and WRITE_ONCE() again prevent tearing in this example:
foo2.a = foo1.a;
- ACCESS_ONCE(foo2.b) = ACCESS_ONCE(foo1.b);
+ WRITE_ONCE(foo2.b, READ_ONCE(foo1.b));
foo2.c = foo1.c;
-All that aside, it is never necessary to use ACCESS_ONCE() on a variable
-that has been marked volatile. For example, because 'jiffies' is marked
-volatile, it is never necessary to say ACCESS_ONCE(jiffies). The reason
-for this is that ACCESS_ONCE() is implemented as a volatile cast, which
-has no effect when its argument is already marked volatile.
+All that aside, it is never necessary to use READ_ONCE() and
+WRITE_ONCE() on a variable that has been marked volatile. For example,
+because 'jiffies' is marked volatile, it is never necessary to
+say READ_ONCE(jiffies). The reason for this is that READ_ONCE() and
+WRITE_ONCE() are implemented as volatile casts, which has no effect when
+its argument is already marked volatile.
Please note that these compiler barriers have no direct effect on the CPU,
which may then reorder things however it wishes.
@@ -1646,14 +1651,15 @@ The Linux kernel has eight basic CPU memory barriers:
All memory barriers except the data dependency barriers imply a compiler
barrier. Data dependencies do not impose any additional compiler ordering.
-Aside: In the case of data dependencies, the compiler would be expected to
-issue the loads in the correct order (eg. `a[b]` would have to load the value
-of b before loading a[b]), however there is no guarantee in the C specification
-that the compiler may not speculate the value of b (eg. is equal to 1) and load
-a before b (eg. tmp = a[1]; if (b != 1) tmp = a[b]; ). There is also the
-problem of a compiler reloading b after having loaded a[b], thus having a newer
-copy of b than a[b]. A consensus has not yet been reached about these problems,
-however the ACCESS_ONCE macro is a good place to start looking.
+Aside: In the case of data dependencies, the compiler would be expected
+to issue the loads in the correct order (eg. `a[b]` would have to load
+the value of b before loading a[b]), however there is no guarantee in
+the C specification that the compiler may not speculate the value of b
+(eg. is equal to 1) and load a before b (eg. tmp = a[1]; if (b != 1)
+tmp = a[b]; ). There is also the problem of a compiler reloading b after
+having loaded a[b], thus having a newer copy of b than a[b]. A consensus
+has not yet been reached about these problems, however the READ_ONCE()
+macro is a good place to start looking.
SMP memory barriers are reduced to compiler barriers on uniprocessor compiled
systems because it is assumed that a CPU will appear to be self-consistent,
@@ -1848,15 +1854,10 @@ RELEASE are to the same lock variable, but only from the perspective of
another CPU not holding that lock. In short, a ACQUIRE followed by an
RELEASE may -not- be assumed to be a full memory barrier.
-Similarly, the reverse case of a RELEASE followed by an ACQUIRE does not
-imply a full memory barrier. If it is necessary for a RELEASE-ACQUIRE
-pair to produce a full barrier, the ACQUIRE can be followed by an
-smp_mb__after_unlock_lock() invocation. This will produce a full barrier
-if either (a) the RELEASE and the ACQUIRE are executed by the same
-CPU or task, or (b) the RELEASE and ACQUIRE act on the same variable.
-The smp_mb__after_unlock_lock() primitive is free on many architectures.
-Without smp_mb__after_unlock_lock(), the CPU's execution of the critical
-sections corresponding to the RELEASE and the ACQUIRE can cross, so that:
+Similarly, the reverse case of a RELEASE followed by an ACQUIRE does
+not imply a full memory barrier. Therefore, the CPU's execution of the
+critical sections corresponding to the RELEASE and the ACQUIRE can cross,
+so that:
*A = a;
RELEASE M
@@ -1894,29 +1895,6 @@ the RELEASE would simply complete, thereby avoiding the deadlock.
a sleep-unlock race, but the locking primitive needs to resolve
such races properly in any case.
-With smp_mb__after_unlock_lock(), the two critical sections cannot overlap.
-For example, with the following code, the store to *A will always be
-seen by other CPUs before the store to *B:
-
- *A = a;
- RELEASE M
- ACQUIRE N
- smp_mb__after_unlock_lock();
- *B = b;
-
-The operations will always occur in one of the following orders:
-
- STORE *A, RELEASE, ACQUIRE, smp_mb__after_unlock_lock(), STORE *B
- STORE *A, ACQUIRE, RELEASE, smp_mb__after_unlock_lock(), STORE *B
- ACQUIRE, STORE *A, RELEASE, smp_mb__after_unlock_lock(), STORE *B
-
-If the RELEASE and ACQUIRE were instead both operating on the same lock
-variable, only the first of these alternatives can occur. In addition,
-the more strongly ordered systems may rule out some of the above orders.
-But in any case, as noted earlier, the smp_mb__after_unlock_lock()
-ensures that the store to *A will always be seen as happening before
-the store to *B.
-
Locks and semaphores may not provide any guarantee of ordering on UP compiled
systems, and so cannot be counted on in such a situation to actually achieve
anything at all - especially with respect to I/O accesses - unless combined
@@ -2126,12 +2104,12 @@ three CPUs; then should the following sequence of events occur:
CPU 1 CPU 2
=============================== ===============================
- ACCESS_ONCE(*A) = a; ACCESS_ONCE(*E) = e;
+ WRITE_ONCE(*A, a); WRITE_ONCE(*E, e);
ACQUIRE M ACQUIRE Q
- ACCESS_ONCE(*B) = b; ACCESS_ONCE(*F) = f;
- ACCESS_ONCE(*C) = c; ACCESS_ONCE(*G) = g;
+ WRITE_ONCE(*B, b); WRITE_ONCE(*F, f);
+ WRITE_ONCE(*C, c); WRITE_ONCE(*G, g);
RELEASE M RELEASE Q
- ACCESS_ONCE(*D) = d; ACCESS_ONCE(*H) = h;
+ WRITE_ONCE(*D, d); WRITE_ONCE(*H, h);
Then there is no guarantee as to what order CPU 3 will see the accesses to *A
through *H occur in, other than the constraints imposed by the separate locks
@@ -2147,40 +2125,6 @@ But it won't see any of:
*E, *F or *G following RELEASE Q
-However, if the following occurs:
-
- CPU 1 CPU 2
- =============================== ===============================
- ACCESS_ONCE(*A) = a;
- ACQUIRE M [1]
- ACCESS_ONCE(*B) = b;
- ACCESS_ONCE(*C) = c;
- RELEASE M [1]
- ACCESS_ONCE(*D) = d; ACCESS_ONCE(*E) = e;
- ACQUIRE M [2]
- smp_mb__after_unlock_lock();
- ACCESS_ONCE(*F) = f;
- ACCESS_ONCE(*G) = g;
- RELEASE M [2]
- ACCESS_ONCE(*H) = h;
-
-CPU 3 might see:
-
- *E, ACQUIRE M [1], *C, *B, *A, RELEASE M [1],
- ACQUIRE M [2], *H, *F, *G, RELEASE M [2], *D
-
-But assuming CPU 1 gets the lock first, CPU 3 won't see any of:
-
- *B, *C, *D, *F, *G or *H preceding ACQUIRE M [1]
- *A, *B or *C following RELEASE M [1]
- *F, *G or *H preceding ACQUIRE M [2]
- *A, *B, *C, *E, *F or *G following RELEASE M [2]
-
-Note that the smp_mb__after_unlock_lock() is critically important
-here: Without it CPU 3 might see some of the above orderings.
-Without smp_mb__after_unlock_lock(), the accesses are not guaranteed
-to be seen in order unless CPU 3 holds lock M.
-
ACQUIRES VS I/O ACCESSES
------------------------
@@ -2881,11 +2825,11 @@ A programmer might take it for granted that the CPU will perform memory
operations in exactly the order specified, so that if the CPU is, for example,
given the following piece of code to execute:
- a = ACCESS_ONCE(*A);
- ACCESS_ONCE(*B) = b;
- c = ACCESS_ONCE(*C);
- d = ACCESS_ONCE(*D);
- ACCESS_ONCE(*E) = e;
+ a = READ_ONCE(*A);
+ WRITE_ONCE(*B, b);
+ c = READ_ONCE(*C);
+ d = READ_ONCE(*D);
+ WRITE_ONCE(*E, e);
they would then expect that the CPU will complete the memory operation for each
instruction before moving on to the next one, leading to a definite sequence of
@@ -2932,12 +2876,12 @@ However, it is guaranteed that a CPU will be self-consistent: it will see its
_own_ accesses appear to be correctly ordered, without the need for a memory
barrier. For instance with the following code:
- U = ACCESS_ONCE(*A);
- ACCESS_ONCE(*A) = V;
- ACCESS_ONCE(*A) = W;
- X = ACCESS_ONCE(*A);
- ACCESS_ONCE(*A) = Y;
- Z = ACCESS_ONCE(*A);
+ U = READ_ONCE(*A);
+ WRITE_ONCE(*A, V);
+ WRITE_ONCE(*A, W);
+ X = READ_ONCE(*A);
+ WRITE_ONCE(*A, Y);
+ Z = READ_ONCE(*A);
and assuming no intervention by an external influence, it can be assumed that
the final result will appear to be:
@@ -2953,13 +2897,14 @@ accesses:
U=LOAD *A, STORE *A=V, STORE *A=W, X=LOAD *A, STORE *A=Y, Z=LOAD *A
in that order, but, without intervention, the sequence may have almost any
-combination of elements combined or discarded, provided the program's view of
-the world remains consistent. Note that ACCESS_ONCE() is -not- optional
-in the above example, as there are architectures where a given CPU might
-reorder successive loads to the same location. On such architectures,
-ACCESS_ONCE() does whatever is necessary to prevent this, for example, on
-Itanium the volatile casts used by ACCESS_ONCE() cause GCC to emit the
-special ld.acq and st.rel instructions that prevent such reordering.
+combination of elements combined or discarded, provided the program's view
+of the world remains consistent. Note that READ_ONCE() and WRITE_ONCE()
+are -not- optional in the above example, as there are architectures
+where a given CPU might reorder successive loads to the same location.
+On such architectures, READ_ONCE() and WRITE_ONCE() do whatever is
+necessary to prevent this, for example, on Itanium the volatile casts
+used by READ_ONCE() and WRITE_ONCE() cause GCC to emit the special ld.acq
+and st.rel instructions (respectively) that prevent such reordering.
The compiler may also combine, discard or defer elements of the sequence before
the CPU even sees them.
@@ -2973,13 +2918,14 @@ may be reduced to:
*A = W;
-since, without either a write barrier or an ACCESS_ONCE(), it can be
+since, without either a write barrier or an WRITE_ONCE(), it can be
assumed that the effect of the storage of V to *A is lost. Similarly:
*A = Y;
Z = *A;
-may, without a memory barrier or an ACCESS_ONCE(), be reduced to:
+may, without a memory barrier or an READ_ONCE() and WRITE_ONCE(), be
+reduced to:
*A = Y;
Z = Y;
diff --git a/Documentation/men-chameleon-bus.txt b/Documentation/men-chameleon-bus.txt
new file mode 100644
index 000000000000..30ded732027e
--- /dev/null
+++ b/Documentation/men-chameleon-bus.txt
@@ -0,0 +1,163 @@
+ MEN Chameleon Bus
+ =================
+
+Table of Contents
+=================
+1 Introduction
+ 1.1 Scope of this Document
+ 1.2 Limitations of the current implementation
+2 Architecture
+ 2.1 MEN Chameleon Bus
+ 2.2 Carrier Devices
+ 2.3 Parser
+3 Resource handling
+ 3.1 Memory Resources
+ 3.2 IRQs
+4 Writing an MCB driver
+ 4.1 The driver structure
+ 4.2 Probing and attaching
+ 4.3 Initializing the driver
+
+
+1 Introduction
+===============
+ This document describes the architecture and implementation of the MEN
+ Chameleon Bus (called MCB throughout this document).
+
+1.1 Scope of this Document
+---------------------------
+ This document is intended to be a short overview of the current
+ implementation and does by no means describe the complete possibilities of MCB
+ based devices.
+
+1.2 Limitations of the current implementation
+----------------------------------------------
+ The current implementation is limited to PCI and PCIe based carrier devices
+ that only use a single memory resource and share the PCI legacy IRQ. Not
+ implemented are:
+ - Multi-resource MCB devices like the VME Controller or M-Module carrier.
+ - MCB devices that need another MCB device, like SRAM for a DMA Controller's
+ buffer descriptors or a video controller's video memory.
+ - A per-carrier IRQ domain for carrier devices that have one (or more) IRQs
+ per MCB device like PCIe based carriers with MSI or MSI-X support.
+
+2 Architecture
+===============
+ MCB is divided into 3 functional blocks:
+ - The MEN Chameleon Bus itself,
+ - drivers for MCB Carrier Devices and
+ - the parser for the Chameleon table.
+
+2.1 MEN Chameleon Bus
+----------------------
+ The MEN Chameleon Bus is an artificial bus system that attaches to a so
+ called Chameleon FPGA device found on some hardware produced my MEN Mikro
+ Elektronik GmbH. These devices are multi-function devices implemented in a
+ single FPGA and usually attached via some sort of PCI or PCIe link. Each
+ FPGA contains a header section describing the content of the FPGA. The
+ header lists the device id, PCI BAR, offset from the beginning of the PCI
+ BAR, size in the FPGA, interrupt number and some other properties currently
+ not handled by the MCB implementation.
+
+2.2 Carrier Devices
+--------------------
+ A carrier device is just an abstraction for the real world physical bus the
+ Chameleon FPGA is attached to. Some IP Core drivers may need to interact with
+ properties of the carrier device (like querying the IRQ number of a PCI
+ device). To provide abstraction from the real hardware bus, an MCB carrier
+ device provides callback methods to translate the driver's MCB function calls
+ to hardware related function calls. For example a carrier device may
+ implement the get_irq() method which can be translated into a hardware bus
+ query for the IRQ number the device should use.
+
+2.3 Parser
+-----------
+ The parser reads the first 512 bytes of a Chameleon device and parses the
+ Chameleon table. Currently the parser only supports the Chameleon v2 variant
+ of the Chameleon table but can easily be adopted to support an older or
+ possible future variant. While parsing the table's entries new MCB devices
+ are allocated and their resources are assigned according to the resource
+ assignment in the Chameleon table. After resource assignment is finished, the
+ MCB devices are registered at the MCB and thus at the driver core of the
+ Linux kernel.
+
+3 Resource handling
+====================
+ The current implementation assigns exactly one memory and one IRQ resource
+ per MCB device. But this is likely going to change in the future.
+
+3.1 Memory Resources
+---------------------
+ Each MCB device has exactly one memory resource, which can be requested from
+ the MCB bus. This memory resource is the physical address of the MCB device
+ inside the carrier and is intended to be passed to ioremap() and friends. It
+ is already requested from the kernel by calling request_mem_region().
+
+3.2 IRQs
+---------
+ Each MCB device has exactly one IRQ resource, which can be requested from the
+ MCB bus. If a carrier device driver implements the ->get_irq() callback
+ method, the IRQ number assigned by the carrier device will be returned,
+ otherwise the IRQ number inside the Chameleon table will be returned. This
+ number is suitable to be passed to request_irq().
+
+4 Writing an MCB driver
+=======================
+
+4.1 The driver structure
+-------------------------
+ Each MCB driver has a structure to identify the device driver as well as
+ device ids which identify the IP Core inside the FPGA. The driver structure
+ also contains callback methods which get executed on driver probe and
+ removal from the system.
+
+
+ static const struct mcb_device_id foo_ids[] = {
+ { .device = 0x123 },
+ { }
+ };
+ MODULE_DEVICE_TABLE(mcb, foo_ids);
+
+ static struct mcb_driver foo_driver = {
+ driver = {
+ .name = "foo-bar",
+ .owner = THIS_MODULE,
+ },
+ .probe = foo_probe,
+ .remove = foo_remove,
+ .id_table = foo_ids,
+ };
+
+4.2 Probing and attaching
+--------------------------
+ When a driver is loaded and the MCB devices it services are found, the MCB
+ core will call the driver's probe callback method. When the driver is removed
+ from the system, the MCB core will call the driver's remove callback method.
+
+
+ static init foo_probe(struct mcb_device *mdev, const struct mcb_device_id *id);
+ static void foo_remove(struct mcb_device *mdev);
+
+4.3 Initializing the driver
+----------------------------
+ When the kernel is booted or your foo driver module is inserted, you have to
+ perform driver initialization. Usually it is enough to register your driver
+ module at the MCB core.
+
+
+ static int __init foo_init(void)
+ {
+ return mcb_register_driver(&foo_driver);
+ }
+ module_init(foo_init);
+
+ static void __exit foo_exit(void)
+ {
+ mcb_unregister_driver(&foo_driver);
+ }
+ module_exit(foo_exit);
+
+ The module_mcb_driver() macro can be used to reduce the above code.
+
+
+ module_mcb_driver(foo_driver);
diff --git a/Documentation/misc-devices/mei/mei.txt b/Documentation/misc-devices/mei/mei.txt
index 8d47501bba0a..91c1fa34f48b 100644
--- a/Documentation/misc-devices/mei/mei.txt
+++ b/Documentation/misc-devices/mei/mei.txt
@@ -96,7 +96,7 @@ A code snippet for an application communicating with Intel AMTHI client:
IOCTL
=====
-The Intel MEI Driver supports the following IOCTL command:
+The Intel MEI Driver supports the following IOCTL commands:
IOCTL_MEI_CONNECT_CLIENT Connect to firmware Feature (client).
usage:
@@ -125,6 +125,49 @@ The Intel MEI Driver supports the following IOCTL command:
data that can be sent or received. (e.g. if MTU=2K, can send
requests up to bytes 2k and received responses up to 2k bytes).
+ IOCTL_MEI_NOTIFY_SET: enable or disable event notifications
+
+ Usage:
+ uint32_t enable;
+ ioctl(fd, IOCTL_MEI_NOTIFY_SET, &enable);
+
+ Inputs:
+ uint32_t enable = 1;
+ or
+ uint32_t enable[disable] = 0;
+
+ Error returns:
+ EINVAL Wrong IOCTL Number
+ ENODEV Device is not initialized or the client not connected
+ ENOMEM Unable to allocate memory to client internal data.
+ EFAULT Fatal Error (e.g. Unable to access user input data)
+ EOPNOTSUPP if the device doesn't support the feature
+
+ Notes:
+ The client must be connected in order to enable notification events
+
+
+ IOCTL_MEI_NOTIFY_GET : retrieve event
+
+ Usage:
+ uint32_t event;
+ ioctl(fd, IOCTL_MEI_NOTIFY_GET, &event);
+
+ Outputs:
+ 1 - if an event is pending
+ 0 - if there is no even pending
+
+ Error returns:
+ EINVAL Wrong IOCTL Number
+ ENODEV Device is not initialized or the client not connected
+ ENOMEM Unable to allocate memory to client internal data.
+ EFAULT Fatal Error (e.g. Unable to access user input data)
+ EOPNOTSUPP if the device doesn't support the feature
+
+ Notes:
+ The client must be connected and event notification has to be enabled
+ in order to receive an event
+
Intel ME Applications
=====================
diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index b48d4a149411..fd1a1aad49a9 100644
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt
@@ -510,7 +510,7 @@ solution for a couple of reasons:
4.1.2 RAW socket option CAN_RAW_ERR_FILTER
- As described in chapter 3.4 the CAN interface driver can generate so
+ As described in chapter 3.3 the CAN interface driver can generate so
called Error Message Frames that can optionally be passed to the user
application in the same way as other CAN frames. The possible
errors are divided into different error classes that may be filtered
@@ -1152,7 +1152,7 @@ solution for a couple of reasons:
$ ip link set canX type can restart
Note that a restart will also create a CAN error message frame (see
- also chapter 3.4).
+ also chapter 3.3).
6.6 CAN FD (flexible data rate) driver support
diff --git a/Documentation/nvmem/nvmem.txt b/Documentation/nvmem/nvmem.txt
new file mode 100644
index 000000000000..dbd40d879239
--- /dev/null
+++ b/Documentation/nvmem/nvmem.txt
@@ -0,0 +1,152 @@
+ NVMEM SUBSYSTEM
+ Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+This document explains the NVMEM Framework along with the APIs provided,
+and how to use it.
+
+1. Introduction
+===============
+*NVMEM* is the abbreviation for Non Volatile Memory layer. It is used to
+retrieve configuration of SOC or Device specific data from non volatile
+memories like eeprom, efuses and so on.
+
+Before this framework existed, NVMEM drivers like eeprom were stored in
+drivers/misc, where they all had to duplicate pretty much the same code to
+register a sysfs file, allow in-kernel users to access the content of the
+devices they were driving, etc.
+
+This was also a problem as far as other in-kernel users were involved, since
+the solutions used were pretty much different from one driver to another, there
+was a rather big abstraction leak.
+
+This framework aims at solve these problems. It also introduces DT
+representation for consumer devices to go get the data they require (MAC
+Addresses, SoC/Revision ID, part numbers, and so on) from the NVMEMs. This
+framework is based on regmap, so that most of the abstraction available in
+regmap can be reused, across multiple types of buses.
+
+NVMEM Providers
++++++++++++++++
+
+NVMEM provider refers to an entity that implements methods to initialize, read
+and write the non-volatile memory.
+
+2. Registering/Unregistering the NVMEM provider
+===============================================
+
+A NVMEM provider can register with NVMEM core by supplying relevant
+nvmem configuration to nvmem_register(), on success core would return a valid
+nvmem_device pointer.
+
+nvmem_unregister(nvmem) is used to unregister a previously registered provider.
+
+For example, a simple qfprom case:
+
+static struct nvmem_config econfig = {
+ .name = "qfprom",
+ .owner = THIS_MODULE,
+};
+
+static int qfprom_probe(struct platform_device *pdev)
+{
+ ...
+ econfig.dev = &pdev->dev;
+ nvmem = nvmem_register(&econfig);
+ ...
+}
+
+It is mandatory that the NVMEM provider has a regmap associated with its
+struct device. Failure to do would return error code from nvmem_register().
+
+NVMEM Consumers
++++++++++++++++
+
+NVMEM consumers are the entities which make use of the NVMEM provider to
+read from and to NVMEM.
+
+3. NVMEM cell based consumer APIs
+=================================
+
+NVMEM cells are the data entries/fields in the NVMEM.
+The NVMEM framework provides 3 APIs to read/write NVMEM cells.
+
+struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *name);
+struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, const char *name);
+
+void nvmem_cell_put(struct nvmem_cell *cell);
+void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell);
+
+void *nvmem_cell_read(struct nvmem_cell *cell, ssize_t *len);
+int nvmem_cell_write(struct nvmem_cell *cell, void *buf, ssize_t len);
+
+*nvmem_cell_get() apis will get a reference to nvmem cell for a given id,
+and nvmem_cell_read/write() can then read or write to the cell.
+Once the usage of the cell is finished the consumer should call *nvmem_cell_put()
+to free all the allocation memory for the cell.
+
+4. Direct NVMEM device based consumer APIs
+==========================================
+
+In some instances it is necessary to directly read/write the NVMEM.
+To facilitate such consumers NVMEM framework provides below apis.
+
+struct nvmem_device *nvmem_device_get(struct device *dev, const char *name);
+struct nvmem_device *devm_nvmem_device_get(struct device *dev,
+ const char *name);
+void nvmem_device_put(struct nvmem_device *nvmem);
+int nvmem_device_read(struct nvmem_device *nvmem, unsigned int offset,
+ size_t bytes, void *buf);
+int nvmem_device_write(struct nvmem_device *nvmem, unsigned int offset,
+ size_t bytes, void *buf);
+int nvmem_device_cell_read(struct nvmem_device *nvmem,
+ struct nvmem_cell_info *info, void *buf);
+int nvmem_device_cell_write(struct nvmem_device *nvmem,
+ struct nvmem_cell_info *info, void *buf);
+
+Before the consumers can read/write NVMEM directly, it should get hold
+of nvmem_controller from one of the *nvmem_device_get() api.
+
+The difference between these apis and cell based apis is that these apis always
+take nvmem_device as parameter.
+
+5. Releasing a reference to the NVMEM
+=====================================
+
+When a consumers no longer needs the NVMEM, it has to release the reference
+to the NVMEM it has obtained using the APIs mentioned in the above section.
+The NVMEM framework provides 2 APIs to release a reference to the NVMEM.
+
+void nvmem_cell_put(struct nvmem_cell *cell);
+void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell);
+void nvmem_device_put(struct nvmem_device *nvmem);
+void devm_nvmem_device_put(struct device *dev, struct nvmem_device *nvmem);
+
+Both these APIs are used to release a reference to the NVMEM and
+devm_nvmem_cell_put and devm_nvmem_device_put destroys the devres associated
+with this NVMEM.
+
+Userspace
++++++++++
+
+6. Userspace binary interface
+==============================
+
+Userspace can read/write the raw NVMEM file located at
+/sys/bus/nvmem/devices/*/nvmem
+
+ex:
+
+hexdump /sys/bus/nvmem/devices/qfprom0/nvmem
+
+0000000 0000 0000 0000 0000 0000 0000 0000 0000
+*
+00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00
+0000000 0000 0000 0000 0000 0000 0000 0000 0000
+...
+*
+0001000
+
+7. DeviceTree Binding
+=====================
+
+See Documentation/devicetree/bindings/nvmem/nvmem.txt
diff --git a/Documentation/pcmcia/locking.txt b/Documentation/pcmcia/locking.txt
index 68f622bc4064..b2c9b478906b 100644
--- a/Documentation/pcmcia/locking.txt
+++ b/Documentation/pcmcia/locking.txt
@@ -96,7 +96,7 @@ or single-use fields not mentioned):
3. Per PCMCIA-device Data:
--------------------------
-The "main" struct pcmcia_devie is protected as follows (read-only fields
+The "main" struct pcmcia_device is protected as follows (read-only fields
or single-use fields not mentioned):
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index d172bce0fd49..8ba6625fdd63 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -341,6 +341,13 @@ the phases are:
and is entirely responsible for bringing the device back to the
functional state as appropriate.
+ Note that this direct-complete procedure applies even if the device is
+ disabled for runtime PM; only the runtime-PM status matters. It follows
+ that if a device has system-sleep callbacks but does not support runtime
+ PM, then its prepare callback must never return a positive value. This
+ is because all devices are initially set to runtime-suspended with
+ runtime PM disabled.
+
2. The suspend methods should quiesce the device to stop it from performing
I/O. They also may save the device registers and put it into the
appropriate low-power state, depending on the bus type the device is on,
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index e76dc0ad4d2b..0784bc3a2ab5 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -445,10 +445,6 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
bool pm_runtime_status_suspended(struct device *dev);
- return true if the device's runtime PM status is 'suspended'
- bool pm_runtime_suspended_if_enabled(struct device *dev);
- - return true if the device's runtime PM status is 'suspended' and its
- 'power.disable_depth' field is equal to 1
-
void pm_runtime_allow(struct device *dev);
- set the power.runtime_auto flag for the device and decrease its usage
counter (used by the /sys/devices/.../power/control interface to
diff --git a/Documentation/power/suspend-and-cpuhotplug.txt b/Documentation/power/suspend-and-cpuhotplug.txt
index 2850df3bf957..2fc909502db5 100644
--- a/Documentation/power/suspend-and-cpuhotplug.txt
+++ b/Documentation/power/suspend-and-cpuhotplug.txt
@@ -72,7 +72,7 @@ More details follow:
|
v
Disable regular cpu hotplug
- by setting cpu_hotplug_disabled=1
+ by increasing cpu_hotplug_disabled
|
v
Release cpu_add_remove_lock
@@ -89,7 +89,7 @@ Resuming back is likewise, with the counterparts being (in the order of
execution during resume):
* enable_nonboot_cpus() which involves:
| Acquire cpu_add_remove_lock
- | Reset cpu_hotplug_disabled to 0, thereby enabling regular cpu hotplug
+ | Decrease cpu_hotplug_disabled, thereby enabling regular cpu hotplug
| Call _cpu_up() [for all those cpus in the frozen_cpus mask, in a loop]
| Release cpu_add_remove_lock
v
@@ -120,7 +120,7 @@ after the entire cycle is complete (i.e., suspend + resume).
Acquire cpu_add_remove_lock
|
v
- If cpu_hotplug_disabled is 1
+ If cpu_hotplug_disabled > 0
return gracefully
|
|
diff --git a/Documentation/powerpc/cxl.txt b/Documentation/powerpc/cxl.txt
index 2a230d01cd8c..205c1b81625c 100644
--- a/Documentation/powerpc/cxl.txt
+++ b/Documentation/powerpc/cxl.txt
@@ -133,7 +133,7 @@ User API
The following file operations are supported on both slave and
master devices.
- A userspace library libcxl is avaliable here:
+ A userspace library libcxl is available here:
https://github.com/ibm-capi/libcxl
This provides a C interface to this kernel API.
diff --git a/Documentation/powerpc/cxlflash.txt b/Documentation/powerpc/cxlflash.txt
new file mode 100644
index 000000000000..4202d1bc583c
--- /dev/null
+++ b/Documentation/powerpc/cxlflash.txt
@@ -0,0 +1,318 @@
+Introduction
+============
+
+ The IBM Power architecture provides support for CAPI (Coherent
+ Accelerator Power Interface), which is available to certain PCIe slots
+ on Power 8 systems. CAPI can be thought of as a special tunneling
+ protocol through PCIe that allow PCIe adapters to look like special
+ purpose co-processors which can read or write an application's
+ memory and generate page faults. As a result, the host interface to
+ an adapter running in CAPI mode does not require the data buffers to
+ be mapped to the device's memory (IOMMU bypass) nor does it require
+ memory to be pinned.
+
+ On Linux, Coherent Accelerator (CXL) kernel services present CAPI
+ devices as a PCI device by implementing a virtual PCI host bridge.
+ This abstraction simplifies the infrastructure and programming
+ model, allowing for drivers to look similar to other native PCI
+ device drivers.
+
+ CXL provides a mechanism by which user space applications can
+ directly talk to a device (network or storage) bypassing the typical
+ kernel/device driver stack. The CXL Flash Adapter Driver enables a
+ user space application direct access to Flash storage.
+
+ The CXL Flash Adapter Driver is a kernel module that sits in the
+ SCSI stack as a low level device driver (below the SCSI disk and
+ protocol drivers) for the IBM CXL Flash Adapter. This driver is
+ responsible for the initialization of the adapter, setting up the
+ special path for user space access, and performing error recovery. It
+ communicates directly the Flash Accelerator Functional Unit (AFU)
+ as described in Documentation/powerpc/cxl.txt.
+
+ The cxlflash driver supports two, mutually exclusive, modes of
+ operation at the device (LUN) level:
+
+ - Any flash device (LUN) can be configured to be accessed as a
+ regular disk device (i.e.: /dev/sdc). This is the default mode.
+
+ - Any flash device (LUN) can be configured to be accessed from
+ user space with a special block library. This mode further
+ specifies the means of accessing the device and provides for
+ either raw access to the entire LUN (referred to as direct
+ or physical LUN access) or access to a kernel/AFU-mediated
+ partition of the LUN (referred to as virtual LUN access). The
+ segmentation of a disk device into virtual LUNs is assisted
+ by special translation services provided by the Flash AFU.
+
+Overview
+========
+
+ The Coherent Accelerator Interface Architecture (CAIA) introduces a
+ concept of a master context. A master typically has special privileges
+ granted to it by the kernel or hypervisor allowing it to perform AFU
+ wide management and control. The master may or may not be involved
+ directly in each user I/O, but at the minimum is involved in the
+ initial setup before the user application is allowed to send requests
+ directly to the AFU.
+
+ The CXL Flash Adapter Driver establishes a master context with the
+ AFU. It uses memory mapped I/O (MMIO) for this control and setup. The
+ Adapter Problem Space Memory Map looks like this:
+
+ +-------------------------------+
+ | 512 * 64 KB User MMIO |
+ | (per context) |
+ | User Accessible |
+ +-------------------------------+
+ | 512 * 128 B per context |
+ | Provisioning and Control |
+ | Trusted Process accessible |
+ +-------------------------------+
+ | 64 KB Global |
+ | Trusted Process accessible |
+ +-------------------------------+
+
+ This driver configures itself into the SCSI software stack as an
+ adapter driver. The driver is the only entity that is considered a
+ Trusted Process to program the Provisioning and Control and Global
+ areas in the MMIO Space shown above. The master context driver
+ discovers all LUNs attached to the CXL Flash adapter and instantiates
+ scsi block devices (/dev/sdb, /dev/sdc etc.) for each unique LUN
+ seen from each path.
+
+ Once these scsi block devices are instantiated, an application
+ written to a specification provided by the block library may get
+ access to the Flash from user space (without requiring a system call).
+
+ This master context driver also provides a series of ioctls for this
+ block library to enable this user space access. The driver supports
+ two modes for accessing the block device.
+
+ The first mode is called a virtual mode. In this mode a single scsi
+ block device (/dev/sdb) may be carved up into any number of distinct
+ virtual LUNs. The virtual LUNs may be resized as long as the sum of
+ the sizes of all the virtual LUNs, along with the meta-data associated
+ with it does not exceed the physical capacity.
+
+ The second mode is called the physical mode. In this mode a single
+ block device (/dev/sdb) may be opened directly by the block library
+ and the entire space for the LUN is available to the application.
+
+ Only the physical mode provides persistence of the data. i.e. The
+ data written to the block device will survive application exit and
+ restart and also reboot. The virtual LUNs do not persist (i.e. do
+ not survive after the application terminates or the system reboots).
+
+
+Block library API
+=================
+
+ Applications intending to get access to the CXL Flash from user
+ space should use the block library, as it abstracts the details of
+ interfacing directly with the cxlflash driver that are necessary for
+ performing administrative actions (i.e.: setup, tear down, resize).
+ The block library can be thought of as a 'user' of services,
+ implemented as IOCTLs, that are provided by the cxlflash driver
+ specifically for devices (LUNs) operating in user space access
+ mode. While it is not a requirement that applications understand
+ the interface between the block library and the cxlflash driver,
+ a high-level overview of each supported service (IOCTL) is provided
+ below.
+
+ The block library can be found on GitHub:
+ http://www.github.com/mikehollinger/ibmcapikv
+
+
+CXL Flash Driver IOCTLs
+=======================
+
+ Users, such as the block library, that wish to interface with a flash
+ device (LUN) via user space access need to use the services provided
+ by the cxlflash driver. As these services are implemented as ioctls,
+ a file descriptor handle must first be obtained in order to establish
+ the communication channel between a user and the kernel. This file
+ descriptor is obtained by opening the device special file associated
+ with the scsi disk device (/dev/sdb) that was created during LUN
+ discovery. As per the location of the cxlflash driver within the
+ SCSI protocol stack, this open is actually not seen by the cxlflash
+ driver. Upon successful open, the user receives a file descriptor
+ (herein referred to as fd1) that should be used for issuing the
+ subsequent ioctls listed below.
+
+ The structure definitions for these IOCTLs are available in:
+ uapi/scsi/cxlflash_ioctl.h
+
+DK_CXLFLASH_ATTACH
+------------------
+
+ This ioctl obtains, initializes, and starts a context using the CXL
+ kernel services. These services specify a context id (u16) by which
+ to uniquely identify the context and its allocated resources. The
+ services additionally provide a second file descriptor (herein
+ referred to as fd2) that is used by the block library to initiate
+ memory mapped I/O (via mmap()) to the CXL flash device and poll for
+ completion events. This file descriptor is intentionally installed by
+ this driver and not the CXL kernel services to allow for intermediary
+ notification and access in the event of a non-user-initiated close(),
+ such as a killed process. This design point is described in further
+ detail in the description for the DK_CXLFLASH_DETACH ioctl.
+
+ There are a few important aspects regarding the "tokens" (context id
+ and fd2) that are provided back to the user:
+
+ - These tokens are only valid for the process under which they
+ were created. The child of a forked process cannot continue
+ to use the context id or file descriptor created by its parent
+ (see DK_CXLFLASH_VLUN_CLONE for further details).
+
+ - These tokens are only valid for the lifetime of the context and
+ the process under which they were created. Once either is
+ destroyed, the tokens are to be considered stale and subsequent
+ usage will result in errors.
+
+ - When a context is no longer needed, the user shall detach from
+ the context via the DK_CXLFLASH_DETACH ioctl.
+
+ - A close on fd2 will invalidate the tokens. This operation is not
+ required by the user.
+
+DK_CXLFLASH_USER_DIRECT
+-----------------------
+ This ioctl is responsible for transitioning the LUN to direct
+ (physical) mode access and configuring the AFU for direct access from
+ user space on a per-context basis. Additionally, the block size and
+ last logical block address (LBA) are returned to the user.
+
+ As mentioned previously, when operating in user space access mode,
+ LUNs may be accessed in whole or in part. Only one mode is allowed
+ at a time and if one mode is active (outstanding references exist),
+ requests to use the LUN in a different mode are denied.
+
+ The AFU is configured for direct access from user space by adding an
+ entry to the AFU's resource handle table. The index of the entry is
+ treated as a resource handle that is returned to the user. The user
+ is then able to use the handle to reference the LUN during I/O.
+
+DK_CXLFLASH_USER_VIRTUAL
+------------------------
+ This ioctl is responsible for transitioning the LUN to virtual mode
+ of access and configuring the AFU for virtual access from user space
+ on a per-context basis. Additionally, the block size and last logical
+ block address (LBA) are returned to the user.
+
+ As mentioned previously, when operating in user space access mode,
+ LUNs may be accessed in whole or in part. Only one mode is allowed
+ at a time and if one mode is active (outstanding references exist),
+ requests to use the LUN in a different mode are denied.
+
+ The AFU is configured for virtual access from user space by adding
+ an entry to the AFU's resource handle table. The index of the entry
+ is treated as a resource handle that is returned to the user. The
+ user is then able to use the handle to reference the LUN during I/O.
+
+ By default, the virtual LUN is created with a size of 0. The user
+ would need to use the DK_CXLFLASH_VLUN_RESIZE ioctl to adjust the grow
+ the virtual LUN to a desired size. To avoid having to perform this
+ resize for the initial creation of the virtual LUN, the user has the
+ option of specifying a size as part of the DK_CXLFLASH_USER_VIRTUAL
+ ioctl, such that when success is returned to the user, the
+ resource handle that is provided is already referencing provisioned
+ storage. This is reflected by the last LBA being a non-zero value.
+
+DK_CXLFLASH_VLUN_RESIZE
+-----------------------
+ This ioctl is responsible for resizing a previously created virtual
+ LUN and will fail if invoked upon a LUN that is not in virtual
+ mode. Upon success, an updated last LBA is returned to the user
+ indicating the new size of the virtual LUN associated with the
+ resource handle.
+
+ The partitioning of virtual LUNs is jointly mediated by the cxlflash
+ driver and the AFU. An allocation table is kept for each LUN that is
+ operating in the virtual mode and used to program a LUN translation
+ table that the AFU references when provided with a resource handle.
+
+DK_CXLFLASH_RELEASE
+-------------------
+ This ioctl is responsible for releasing a previously obtained
+ reference to either a physical or virtual LUN. This can be
+ thought of as the inverse of the DK_CXLFLASH_USER_DIRECT or
+ DK_CXLFLASH_USER_VIRTUAL ioctls. Upon success, the resource handle
+ is no longer valid and the entry in the resource handle table is
+ made available to be used again.
+
+ As part of the release process for virtual LUNs, the virtual LUN
+ is first resized to 0 to clear out and free the translation tables
+ associated with the virtual LUN reference.
+
+DK_CXLFLASH_DETACH
+------------------
+ This ioctl is responsible for unregistering a context with the
+ cxlflash driver and release outstanding resources that were
+ not explicitly released via the DK_CXLFLASH_RELEASE ioctl. Upon
+ success, all "tokens" which had been provided to the user from the
+ DK_CXLFLASH_ATTACH onward are no longer valid.
+
+DK_CXLFLASH_VLUN_CLONE
+----------------------
+ This ioctl is responsible for cloning a previously created
+ context to a more recently created context. It exists solely to
+ support maintaining user space access to storage after a process
+ forks. Upon success, the child process (which invoked the ioctl)
+ will have access to the same LUNs via the same resource handle(s)
+ and fd2 as the parent, but under a different context.
+
+ Context sharing across processes is not supported with CXL and
+ therefore each fork must be met with establishing a new context
+ for the child process. This ioctl simplifies the state management
+ and playback required by a user in such a scenario. When a process
+ forks, child process can clone the parents context by first creating
+ a context (via DK_CXLFLASH_ATTACH) and then using this ioctl to
+ perform the clone from the parent to the child.
+
+ The clone itself is fairly simple. The resource handle and lun
+ translation tables are copied from the parent context to the child's
+ and then synced with the AFU.
+
+DK_CXLFLASH_VERIFY
+------------------
+ This ioctl is used to detect various changes such as the capacity of
+ the disk changing, the number of LUNs visible changing, etc. In cases
+ where the changes affect the application (such as a LUN resize), the
+ cxlflash driver will report the changed state to the application.
+
+ The user calls in when they want to validate that a LUN hasn't been
+ changed in response to a check condition. As the user is operating out
+ of band from the kernel, they will see these types of events without
+ the kernel's knowledge. When encountered, the user's architected
+ behavior is to call in to this ioctl, indicating what they want to
+ verify and passing along any appropriate information. For now, only
+ verifying a LUN change (ie: size different) with sense data is
+ supported.
+
+DK_CXLFLASH_RECOVER_AFU
+-----------------------
+ This ioctl is used to drive recovery (if such an action is warranted)
+ of a specified user context. Any state associated with the user context
+ is re-established upon successful recovery.
+
+ User contexts are put into an error condition when the device needs to
+ be reset or is terminating. Users are notified of this error condition
+ by seeing all 0xF's on an MMIO read. Upon encountering this, the
+ architected behavior for a user is to call into this ioctl to recover
+ their context. A user may also call into this ioctl at any time to
+ check if the device is operating normally. If a failure is returned
+ from this ioctl, the user is expected to gracefully clean up their
+ context via release/detach ioctls. Until they do, the context they
+ hold is not relinquished. The user may also optionally exit the process
+ at which time the context/resources they held will be freed as part of
+ the release fop.
+
+DK_CXLFLASH_MANAGE_LUN
+----------------------
+ This ioctl is used to switch a LUN from a mode where it is available
+ for file-system access (legacy), to a mode where it is set aside for
+ exclusive user space access (superpipe). In case a LUN is visible
+ across multiple ports and adapters, this ioctl is used to uniquely
+ identify each LUN by its World Wide Node Name (WWNN).
diff --git a/Documentation/powerpc/dscr.txt b/Documentation/powerpc/dscr.txt
index 1ff4400c57b3..ece300c64f76 100644
--- a/Documentation/powerpc/dscr.txt
+++ b/Documentation/powerpc/dscr.txt
@@ -4,7 +4,7 @@
DSCR register in powerpc allows user to have some control of prefetch of data
stream in the processor. Please refer to the ISA documents or related manual
for more detailed information regarding how to use this DSCR to attain this
-control of the pefetches . This document here provides an overview of kernel
+control of the prefetches . This document here provides an overview of kernel
support for DSCR, related kernel objects, it's functionalities and exported
user interface.
@@ -44,7 +44,7 @@ user interface.
value into every CPU's DSCR register right away and updates the current
thread's DSCR value as well.
- Changing the CPU specif DSCR default value in the sysfs does exactly
+ Changing the CPU specific DSCR default value in the sysfs does exactly
the same thing as above but unlike the global one above, it just changes
stuff for that particular CPU instead for all the CPUs on the system.
@@ -62,7 +62,7 @@ user interface.
Accessing DSCR through user level SPR (0x03) from user space will first
create a facility unavailable exception. Inside this exception handler
- all mfspr isntruction based read attempts will get emulated and returned
+ all mfspr instruction based read attempts will get emulated and returned
where as the first mtspr instruction based write attempts will enable
the DSCR facility for the next time around (both for read and write) by
setting DSCR facility in the FSCR register.
diff --git a/Documentation/powerpc/qe_firmware.txt b/Documentation/powerpc/qe_firmware.txt
index 2031ddb33d09..e7ac24aec4ff 100644
--- a/Documentation/powerpc/qe_firmware.txt
+++ b/Documentation/powerpc/qe_firmware.txt
@@ -117,7 +117,7 @@ specific been defined. This table describes the structure.
Extended Modes
This is a double word bit array (64 bits) that defines special functionality
-which has an impact on the softwarew drivers. Each bit has its own impact
+which has an impact on the software drivers. Each bit has its own impact
and has special instructions for the s/w associated with it. This structure is
described in this table:
diff --git a/Documentation/pps/pps.txt b/Documentation/pps/pps.txt
index c508cceeee7d..7cb7264ad598 100644
--- a/Documentation/pps/pps.txt
+++ b/Documentation/pps/pps.txt
@@ -125,7 +125,7 @@ The same function may also run the defined echo function
(pps_ktimer_echo(), passing to it the "ptr" pointer) if the user
asked for that... etc..
-Please see the file drivers/pps/clients/ktimer.c for example code.
+Please see the file drivers/pps/clients/pps-ktimer.c for example code.
SYSFS support
diff --git a/Documentation/s390/00-INDEX b/Documentation/s390/00-INDEX
index 10c874ebdfe5..9189535f6cd2 100644
--- a/Documentation/s390/00-INDEX
+++ b/Documentation/s390/00-INDEX
@@ -16,8 +16,6 @@ Debugging390.txt
- hints for debugging on s390 systems.
driver-model.txt
- information on s390 devices and the driver model.
-kvm.txt
- - ioctl calls to /dev/kvm on s390.
monreader.txt
- information on accessing the z/VM monitor stream from Linux.
qeth.txt
diff --git a/Documentation/s390/kvm.txt b/Documentation/s390/kvm.txt
deleted file mode 100644
index 85f3280d7ef6..000000000000
--- a/Documentation/s390/kvm.txt
+++ /dev/null
@@ -1,125 +0,0 @@
-*** BIG FAT WARNING ***
-The kvm module is currently in EXPERIMENTAL state for s390. This means that
-the interface to the module is not yet considered to remain stable. Thus, be
-prepared that we keep breaking your userspace application and guest
-compatibility over and over again until we feel happy with the result. Make sure
-your guest kernel, your host kernel, and your userspace launcher are in a
-consistent state.
-
-This Documentation describes the unique ioctl calls to /dev/kvm, the resulting
-kvm-vm file descriptors, and the kvm-vcpu file descriptors that differ from x86.
-
-1. ioctl calls to /dev/kvm
-KVM does support the following ioctls on s390 that are common with other
-architectures and do behave the same:
-KVM_GET_API_VERSION
-KVM_CREATE_VM (*) see note
-KVM_CHECK_EXTENSION
-KVM_GET_VCPU_MMAP_SIZE
-
-Notes:
-* KVM_CREATE_VM may fail on s390, if the calling process has multiple
-threads and has not called KVM_S390_ENABLE_SIE before.
-
-In addition, on s390 the following architecture specific ioctls are supported:
-ioctl: KVM_S390_ENABLE_SIE
-args: none
-see also: include/linux/kvm.h
-This call causes the kernel to switch on PGSTE in the user page table. This
-operation is needed in order to run a virtual machine, and it requires the
-calling process to be single-threaded. Note that the first call to KVM_CREATE_VM
-will implicitly try to switch on PGSTE if the user process has not called
-KVM_S390_ENABLE_SIE before. User processes that want to launch multiple threads
-before creating a virtual machine have to call KVM_S390_ENABLE_SIE, or will
-observe an error calling KVM_CREATE_VM. Switching on PGSTE is a one-time
-operation, is not reversible, and will persist over the entire lifetime of
-the calling process. It does not have any user-visible effect other than a small
-performance penalty.
-
-2. ioctl calls to the kvm-vm file descriptor
-KVM does support the following ioctls on s390 that are common with other
-architectures and do behave the same:
-KVM_CREATE_VCPU
-KVM_SET_USER_MEMORY_REGION (*) see note
-KVM_GET_DIRTY_LOG (**) see note
-
-Notes:
-* kvm does only allow exactly one memory slot on s390, which has to start
- at guest absolute address zero and at a user address that is aligned on any
- page boundary. This hardware "limitation" allows us to have a few unique
- optimizations. The memory slot doesn't have to be filled
- with memory actually, it may contain sparse holes. That said, with different
- user memory layout this does still allow a large flexibility when
- doing the guest memory setup.
-** KVM_GET_DIRTY_LOG doesn't work properly yet. The user will receive an empty
-log. This ioctl call is only needed for guest migration, and we intend to
-implement this one in the future.
-
-In addition, on s390 the following architecture specific ioctls for the kvm-vm
-file descriptor are supported:
-ioctl: KVM_S390_INTERRUPT
-args: struct kvm_s390_interrupt *
-see also: include/linux/kvm.h
-This ioctl is used to submit a floating interrupt for a virtual machine.
-Floating interrupts may be delivered to any virtual cpu in the configuration.
-Only some interrupt types defined in include/linux/kvm.h make sense when
-submitted as floating interrupts. The following interrupts are not considered
-to be useful as floating interrupts, and a call to inject them will result in
--EINVAL error code: program interrupts and interprocessor signals. Valid
-floating interrupts are:
-KVM_S390_INT_VIRTIO
-KVM_S390_INT_SERVICE
-
-3. ioctl calls to the kvm-vcpu file descriptor
-KVM does support the following ioctls on s390 that are common with other
-architectures and do behave the same:
-KVM_RUN
-KVM_GET_REGS
-KVM_SET_REGS
-KVM_GET_SREGS
-KVM_SET_SREGS
-KVM_GET_FPU
-KVM_SET_FPU
-
-In addition, on s390 the following architecture specific ioctls for the
-kvm-vcpu file descriptor are supported:
-ioctl: KVM_S390_INTERRUPT
-args: struct kvm_s390_interrupt *
-see also: include/linux/kvm.h
-This ioctl is used to submit an interrupt for a specific virtual cpu.
-Only some interrupt types defined in include/linux/kvm.h make sense when
-submitted for a specific cpu. The following interrupts are not considered
-to be useful, and a call to inject them will result in -EINVAL error code:
-service processor calls and virtio interrupts. Valid interrupt types are:
-KVM_S390_PROGRAM_INT
-KVM_S390_SIGP_STOP
-KVM_S390_RESTART
-KVM_S390_SIGP_SET_PREFIX
-KVM_S390_INT_EMERGENCY
-
-ioctl: KVM_S390_STORE_STATUS
-args: unsigned long
-see also: include/linux/kvm.h
-This ioctl stores the state of the cpu at the guest real address given as
-argument, unless one of the following values defined in include/linux/kvm.h
-is given as argument:
-KVM_S390_STORE_STATUS_NOADDR - the CPU stores its status to the save area in
-absolute lowcore as defined by the principles of operation
-KVM_S390_STORE_STATUS_PREFIXED - the CPU stores its status to the save area in
-its prefix page just like the dump tool that comes with zipl. This is useful
-to create a system dump for use with lkcdutils or crash.
-
-ioctl: KVM_S390_SET_INITIAL_PSW
-args: struct kvm_s390_psw *
-see also: include/linux/kvm.h
-This ioctl can be used to set the processor status word (psw) of a stopped cpu
-prior to running it with KVM_RUN. Note that this call is not required to modify
-the psw during sie intercepts that fall back to userspace because struct kvm_run
-does contain the psw, and this value is evaluated during reentry of KVM_RUN
-after the intercept exit was recognized.
-
-ioctl: KVM_S390_INITIAL_RESET
-args: none
-see also: include/linux/kvm.h
-This ioctl can be used to perform an initial cpu reset as defined by the
-principles of operation. The target cpu has to be in stopped state.
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index 9832ec52f859..9c3f2f8054b5 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -225,11 +225,11 @@ with your system. To disable them, echo 4 (bit 3) into drop_caches.
extfrag_threshold
This parameter affects whether the kernel will compact memory or direct
-reclaim to satisfy a high-order allocation. /proc/extfrag_index shows what
-the fragmentation index for each order is in each zone in the system. Values
-tending towards 0 imply allocations would fail due to lack of memory,
-values towards 1000 imply failures are due to fragmentation and -1 implies
-that the allocation will succeed as long as watermarks are met.
+reclaim to satisfy a high-order allocation. The extfrag/extfrag_index file in
+debugfs shows what the fragmentation index for each order is in each zone in
+the system. Values tending towards 0 imply allocations would fail due to lack
+of memory, values towards 1000 imply failures are due to fragmentation and -1
+implies that the allocation will succeed as long as watermarks are met.
The kernel will not compact memory in a zone if the
fragmentation index is <= extfrag_threshold. The default value is 500.
diff --git a/Documentation/trace/coresight.txt b/Documentation/trace/coresight.txt
index 77d14d51a670..0a5c3290e732 100644
--- a/Documentation/trace/coresight.txt
+++ b/Documentation/trace/coresight.txt
@@ -15,7 +15,7 @@ HW assisted tracing is becoming increasingly useful when dealing with systems
that have many SoCs and other components like GPU and DMA engines. ARM has
developed a HW assisted tracing solution by means of different components, each
being added to a design at synthesis time to cater to specific tracing needs.
-Compoments are generally categorised as source, link and sinks and are
+Components are generally categorised as source, link and sinks and are
(usually) discovered using the AMBA bus.
"Sources" generate a compressed stream representing the processor instruction
@@ -138,7 +138,7 @@ void coresight_unregister(struct coresight_device *csdev);
The registering function is taking a "struct coresight_device *csdev" and
register the device with the core framework. The unregister function takes
-a reference to a "strut coresight_device", obtained at registration time.
+a reference to a "struct coresight_device", obtained at registration time.
If everything goes well during the registration process the new devices will
show up under /sys/bus/coresight/devices, as showns here for a TC2 platform:
diff --git a/Documentation/usb/gadget-testing.txt b/Documentation/usb/gadget-testing.txt
index 592678009c15..b24d3ef89166 100644
--- a/Documentation/usb/gadget-testing.txt
+++ b/Documentation/usb/gadget-testing.txt
@@ -237,9 +237,7 @@ Testing the LOOPBACK function
-----------------------------
device: run the gadget
-host: test-usb
-
-http://www.linux-usb.org/usbtest/testusb.c
+host: test-usb (tools/usb/testusb.c)
8. MASS STORAGE function
========================
@@ -586,9 +584,8 @@ Testing the SOURCESINK function
-------------------------------
device: run the gadget
-host: test-usb
+host: test-usb (tools/usb/testusb.c)
-http://www.linux-usb.org/usbtest/testusb.c
16. UAC1 function
=================
diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt
index b5f83911732a..4a15c90bc11d 100644
--- a/Documentation/usb/power-management.txt
+++ b/Documentation/usb/power-management.txt
@@ -521,10 +521,10 @@ enabling hardware LPM, the host can automatically put the device into
lower power state(L1 for usb2.0 devices, or U1/U2 for usb3.0 devices),
which state device can enter and resume very quickly.
-The user interface for controlling USB2 hardware LPM is located in the
+The user interface for controlling hardware LPM is located in the
power/ subdirectory of each USB device's sysfs directory, that is, in
/sys/bus/usb/devices/.../power/ where "..." is the device's ID. The
-relevant attribute files is usb2_hardware_lpm.
+relevant attribute files are usb2_hardware_lpm and usb3_hardware_lpm.
power/usb2_hardware_lpm
@@ -537,6 +537,17 @@ relevant attribute files is usb2_hardware_lpm.
can write y/Y/1 or n/N/0 to the file to enable/disable
USB2 hardware LPM manually. This is for test purpose mainly.
+ power/usb3_hardware_lpm
+
+ When a USB 3.0 lpm-capable device is plugged in to a
+ xHCI host which supports link PM, it will check if U1
+ and U2 exit latencies have been set in the BOS
+ descriptor; if the check is is passed and the host
+ supports USB3 hardware LPM, USB3 hardware LPM will be
+ enabled for the device and this file will be created.
+ The file holds a string value (enable or disable)
+ indicating whether or not USB3 hardware LPM is
+ enabled for the device.
USB Port Power Control
----------------------
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index a7926a90156f..a4ebcb712375 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -3277,6 +3277,7 @@ should put the acknowledged interrupt vector into the 'epr' field.
struct {
#define KVM_SYSTEM_EVENT_SHUTDOWN 1
#define KVM_SYSTEM_EVENT_RESET 2
+#define KVM_SYSTEM_EVENT_CRASH 3
__u32 type;
__u64 flags;
} system_event;
@@ -3296,6 +3297,10 @@ Valid values for 'type' are:
KVM_SYSTEM_EVENT_RESET -- the guest has requested a reset of the VM.
As with SHUTDOWN, userspace can choose to ignore the request, or
to schedule the reset to occur in the future and may call KVM_RUN again.
+ KVM_SYSTEM_EVENT_CRASH -- the guest crash occurred and the guest
+ has requested a crash condition maintenance. Userspace can choose
+ to ignore the request, or to gather VM memory core dump and/or
+ reset/shutdown of the VM.
/* Fix the size of the union. */
char padding[256];
diff --git a/Documentation/x86/kernel-stacks b/Documentation/x86/kernel-stacks
index 0f3a6c201943..9a0aa4d3a866 100644
--- a/Documentation/x86/kernel-stacks
+++ b/Documentation/x86/kernel-stacks
@@ -16,7 +16,7 @@ associated with each CPU. These stacks are only used while the kernel
is in control on that CPU; when a CPU returns to user space the
specialized stacks contain no useful data. The main CPU stacks are:
-* Interrupt stack. IRQSTACKSIZE
+* Interrupt stack. IRQ_STACK_SIZE
Used for external hardware interrupts. If this is the first external
hardware interrupt (i.e. not a nested hardware interrupt) then the
diff --git a/Documentation/x86/mtrr.txt b/Documentation/x86/mtrr.txt
index 860bc3adc223..dc3e703913ac 100644
--- a/Documentation/x86/mtrr.txt
+++ b/Documentation/x86/mtrr.txt
@@ -6,10 +6,22 @@ Luis R. Rodriguez <mcgrof@do-not-panic.com> - April 9, 2015
===============================================================================
Phasing out MTRR use
-MTRR use is replaced on modern x86 hardware with PAT. Over time the only type
-of effective MTRR that is expected to be supported will be for write-combining.
-As MTRR use is phased out device drivers should use arch_phys_wc_add() to make
-MTRR effective on non-PAT systems while a no-op on PAT enabled systems.
+MTRR use is replaced on modern x86 hardware with PAT. Direct MTRR use by
+drivers on Linux is now completely phased out, device drivers should use
+arch_phys_wc_add() in combination with ioremap_wc() to make MTRR effective on
+non-PAT systems while a no-op but equally effective on PAT enabled systems.
+
+Even if Linux does not use MTRRs directly, some x86 platform firmware may still
+set up MTRRs early before booting the OS. They do this as some platform
+firmware may still have implemented access to MTRRs which would be controlled
+and handled by the platform firmware directly. An example of platform use of
+MTRRs is through the use of SMI handlers, one case could be for fan control,
+the platform code would need uncachable access to some of its fan control
+registers. Such platform access does not need any Operating System MTRR code in
+place other than mtrr_type_lookup() to ensure any OS specific mapping requests
+are aligned with platform MTRR setup. If MTRRs are only set up by the platform
+firmware code though and the OS does not make any specific MTRR mapping
+requests mtrr_type_lookup() should always return MTRR_TYPE_INVALID.
For details refer to Documentation/x86/pat.txt.
diff --git a/Documentation/x86/zero-page.txt b/Documentation/x86/zero-page.txt
index 82fbdbc1e0b0..95a4d34af3fd 100644
--- a/Documentation/x86/zero-page.txt
+++ b/Documentation/x86/zero-page.txt
@@ -17,7 +17,8 @@ Offset Proto Name Meaning
(struct ist_info)
080/010 ALL hd0_info hd0 disk parameter, OBSOLETE!!
090/010 ALL hd1_info hd1 disk parameter, OBSOLETE!!
-0A0/010 ALL sys_desc_table System description table (struct sys_desc_table)
+0A0/010 ALL sys_desc_table System description table (struct sys_desc_table),
+ OBSOLETE!!
0B0/010 ALL olpc_ofw_header OLPC's OpenFirmware CIF and friends
0C0/004 ALL ext_ramdisk_image ramdisk_image high 32bits
0C4/004 ALL ext_ramdisk_size ramdisk_size high 32bits