Merge tag 'staging-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO driver updates from Greg KH:
 "Here is the big set of staging and IIO driver updates for 5.13-rc1.

  Lots of little churn in here, and some larger churn as well. Major
  things are:

   - removal of wimax drivers, no one has this hardware anymore for this
     failed "experiment".

   - removal of the Google gasket driver, turns out no one wanted to
     maintain it or cares about it anymore, so they asked for it to be
     removed.

   - comedi finally moves out of the staging directory into drivers/comedi

     This is one of the oldest kernel subsystems around, being created
     in the 2.0 kernel days, and was one of the first things added to
     drivers/staging/ when that was created over 15 years ago.

     It should have been moved out of staging a long time ago, it's well
     maintained and used by loads of different devices in the real world
     every day. Nice to see this finally happen.

   - so many tiny coding style cleanups it's not funny.

     Perfect storm of at least 2 different intern project application
     deadlines combined to provide a huge number of new contributions in
     this area from people learning how to do kernel development. Great
     job to everyone involved here.

  There's also the normal updates for IIO drivers with new IIO drivers
  and updates all over that subsystem.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (907 commits)
  staging: octeon: Use 'for_each_child_of_node'
  Staging: rtl8723bs: rtw_xmit: fixed tabbing issue
  staging: rtl8188eu: remove unused function parameters
  staging: rtl8188eu: cmdThread is a task_struct
  staging: rtl8188eu: remove constant variable and dead code
  staging: rtl8188eu: change bLeisurePs' type to bool
  staging: rtl8723bs: remove empty #ifdef block
  staging: rtl8723bs: remove unused DBG_871X_LEVEL macro declarations
  staging: rtl8723bs: split too long line
  staging: rtl8723bs: fix indentation in if block
  staging: rtl8723bs: fix code indent issue
  staging: rtl8723bs: replace DBG_871X_LEVEL logs with netdev_*()
  staging: rtl8192e: indent statement properly
  staging: rtl8723bs: Remove led_blink_hdl() and everything related
  staging: comedi: move out of staging directory
  staging: rtl8723bs: remove sdio_drv_priv structure
  staging: rtl8723bs: remove unused argument in function
  staging: rtl8723bs: remove DBG_871X_SEL_NL macro declaration
  staging: rtl8723bs: replace DBG_871X_SEL_NL with netdev_dbg()
  staging: rtl8723bs: fix indentation issue introduced by long line split
  ...

21 files changed, 628 insertions, 240 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index d957f5da5c04..267973541e72 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -33,6 +33,52 @@ Description:
 		Description of the physical chip / device for device X.
 		Typically a part number.
 
+What:		/sys/bus/iio/devices/iio:deviceX/label
+KernelVersion:	5.8
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Optional symbolic label for a device.
+		This is useful for userspace to be able to better identify an
+		individual device.
+
+		The contents of the label are free-form, but there are some
+		standardized uses:
+
+		For proximity sensors which give the proximity (of a person) to
+		a certain wlan or wwan antenna the following standardized labels
+		are used:
+
+		* "proximity-wifi"
+		* "proximity-lte"
+		* "proximity-wifi-lte"
+		* "proximity-wifi-left"
+		* "proximity-wifi-right"
+
+		These are used to indicate to userspace that these proximity
+		sensors may be used to tune transmit power to ensure that
+		Specific Absorption Rate (SAR) limits are honored.
+		The "-left" and "-right" labels are for devices with multiple
+		antennas.
+
+		In some laptops/tablets the standardized proximity sensor labels
+		instead	indicate proximity to a specific part of the device:
+
+		* "proximity-palmrest" indicates proximity to the keyboard's palmrest
+		* "proximity-palmrest-left" indicates proximity to the left part of the palmrest
+		* "proximity-palmrest-right" indicates proximity to the right part of the palmrest
+		* "proximity-lap" indicates the device is being used on someone's lap
+
+		Note "proximity-lap" is special in that its value may be
+		calculated by firmware from other sensor readings, rather then
+		being a raw sensor reading.
+
+		For accelerometers used in 2-in-1s with 360° (yoga-style) hinges,
+		which have an accelerometer in both their base and their display,
+		the following standardized labels are used:
+
+		* "accel-base"
+		* "accel-display"
+
 What:		/sys/bus/iio/devices/iio:deviceX/current_timestamp_clock
 KernelVersion:	4.5
 Contact:	linux-iio@vger.kernel.org
@@ -325,6 +371,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_humidityrelative_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_magn_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_rot_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_angl_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_capacitanceX_offset
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -656,6 +703,8 @@ What:		/sys/.../iio:deviceX/events/in_voltageY_thresh_falling_en
 What:		/sys/.../iio:deviceX/events/in_voltageY_thresh_either_en
 What:		/sys/.../iio:deviceX/events/in_tempY_thresh_rising_en
 What:		/sys/.../iio:deviceX/events/in_tempY_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_capacitanceY_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_capacitanceY_thresh_falling_en
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -733,6 +782,32 @@ Description:
 		a given event type is enabled a future point (and not those for
 		whatever event was previously enabled).
 
+What:		/sys/.../events/in_capacitanceY_adaptive_thresh_rising_en
+What:		/sys/.../events/in_capacitanceY_adaptive_thresh_falling_en
+KernelVersion:	5.13
+Contact:	linux-iio@vger.kernel.org
+Descrption:
+		Adaptive thresholds are similar to normal fixed thresholds
+		but the value is expressed as an offset from a value which
+		provides a low frequency approximation of the channel itself.
+		Thus these detect if a rapid change occurs in the specified
+		direction which crosses tracking value + offset.
+		Tracking value calculation is devices specific.
+
+What:		/sys/.../in_capacitanceY_adaptive_thresh_rising_timeout
+What:		/sys/.../in_capacitanceY_adaptive_thresh_falling_timeout
+KernelVersion:	5.11
+Contact:	linux-iio@vger.kernel.org
+Descrption:
+		When adaptive thresholds are used, the tracking signal
+		may adjust too slowly to step changes in the raw signal.
+		*_timeout (in seconds) specifies a time for which the
+		difference between the slow tracking signal and the raw
+		signal is allowed to remain out-of-range before a reset
+		event occurs in which the tracking signal is made equal
+		to the raw signal, allowing slow tracking to resume and the
+		adaptive threshold event detection to function as expected.
+
 What:		/sys/.../events/in_accel_thresh_rising_value
 What:		/sys/.../events/in_accel_thresh_falling_value
 What:		/sys/.../events/in_accel_x_raw_thresh_rising_value
@@ -773,6 +848,10 @@ What:		/sys/.../events/in_proximity0_thresh_falling_value
 What:		/sys/.../events/in_proximity0_thresh_rising_value
 What:		/sys/.../events/in_illuminance_thresh_rising_value
 What:		/sys/.../events/in_illuminance_thresh_falling_value
+What:		/sys/.../events/in_capacitanceY_thresh_rising_value
+What:		/sys/.../events/in_capacitanceY_thresh_falling_value
+What:		/sys/.../events/in_capacitanceY_thresh_adaptive_rising_value
+What:		/sys/.../events/in_capacitanceY_thresh_falling_rising_value
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -1118,12 +1197,16 @@ Description:
 
 What:		/sys/bus/iio/devices/iio:deviceX/buffer/length
 KernelVersion:	2.6.35
+What:		/sys/bus/iio/devices/iio:deviceX/bufferY/length
+KernelVersion:	5.11
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Number of scans contained by the buffer.
 
 What:		/sys/bus/iio/devices/iio:deviceX/buffer/enable
 KernelVersion:	2.6.35
+What:		/sys/bus/iio/devices/iio:deviceX/bufferY/enable
+KernelVersion:	5.11
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Actually start the buffer capture up.  Will start trigger
@@ -1131,11 +1214,16 @@ Description:
 
 What:		/sys/bus/iio/devices/iio:deviceX/scan_elements
 KernelVersion:	2.6.37
+What:		/sys/bus/iio/devices/iio:deviceX/bufferY
+KernelVersion:	5.11
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Directory containing interfaces for elements that will be
 		captured for a single triggered sample set in the buffer.
 
+		Since kernel 5.11 the scan_elements attributes are merged into
+		the bufferY directory, to be configurable per buffer.
+
 What:		/sys/.../iio:deviceX/scan_elements/in_accel_x_en
 What:		/sys/.../iio:deviceX/scan_elements/in_accel_y_en
 What:		/sys/.../iio:deviceX/scan_elements/in_accel_z_en
@@ -1164,6 +1252,34 @@ What:		/sys/.../iio:deviceX/scan_elements/in_pressure_en
 What:		/sys/.../iio:deviceX/scan_elements/in_rot_quaternion_en
 What:		/sys/.../iio:deviceX/scan_elements/in_proximity_en
 KernelVersion:	2.6.37
+What:		/sys/.../iio:deviceX/bufferY/in_accel_x_en
+What:		/sys/.../iio:deviceX/bufferY/in_accel_y_en
+What:		/sys/.../iio:deviceX/bufferY/in_accel_z_en
+What:		/sys/.../iio:deviceX/bufferY/in_anglvel_x_en
+What:		/sys/.../iio:deviceX/bufferY/in_anglvel_y_en
+What:		/sys/.../iio:deviceX/bufferY/in_anglvel_z_en
+What:		/sys/.../iio:deviceX/bufferY/in_magn_x_en
+What:		/sys/.../iio:deviceX/bufferY/in_magn_y_en
+What:		/sys/.../iio:deviceX/bufferY/in_magn_z_en
+What:		/sys/.../iio:deviceX/bufferY/in_rot_from_north_magnetic_en
+What:		/sys/.../iio:deviceX/bufferY/in_rot_from_north_true_en
+What:		/sys/.../iio:deviceX/bufferY/in_rot_from_north_magnetic_tilt_comp_en
+What:		/sys/.../iio:deviceX/bufferY/in_rot_from_north_true_tilt_comp_en
+What:		/sys/.../iio:deviceX/bufferY/in_timestamp_en
+What:		/sys/.../iio:deviceX/bufferY/in_voltageY_supply_en
+What:		/sys/.../iio:deviceX/bufferY/in_voltageY_en
+What:		/sys/.../iio:deviceX/bufferY/in_voltageY-voltageZ_en
+What:		/sys/.../iio:deviceX/bufferY/in_voltageY_i_en
+What:		/sys/.../iio:deviceX/bufferY/in_voltageY_q_en
+What:		/sys/.../iio:deviceX/bufferY/in_voltage_i_en
+What:		/sys/.../iio:deviceX/bufferY/in_voltage_q_en
+What:		/sys/.../iio:deviceX/bufferY/in_incli_x_en
+What:		/sys/.../iio:deviceX/bufferY/in_incli_y_en
+What:		/sys/.../iio:deviceX/bufferY/in_pressureY_en
+What:		/sys/.../iio:deviceX/bufferY/in_pressure_en
+What:		/sys/.../iio:deviceX/bufferY/in_rot_quaternion_en
+What:		/sys/.../iio:deviceX/bufferY/in_proximity_en
+KernelVersion:	5.11
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Scan element control for triggered data capture.
@@ -1185,6 +1301,23 @@ What:		/sys/.../iio:deviceX/scan_elements/in_pressure_type
 What:		/sys/.../iio:deviceX/scan_elements/in_rot_quaternion_type
 What:		/sys/.../iio:deviceX/scan_elements/in_proximity_type
 KernelVersion:	2.6.37
+What:		/sys/.../iio:deviceX/bufferY/in_accel_type
+What:		/sys/.../iio:deviceX/bufferY/in_anglvel_type
+What:		/sys/.../iio:deviceX/bufferY/in_magn_type
+What:		/sys/.../iio:deviceX/bufferY/in_incli_type
+What:		/sys/.../iio:deviceX/bufferY/in_voltageY_type
+What:		/sys/.../iio:deviceX/bufferY/in_voltage_type
+What:		/sys/.../iio:deviceX/bufferY/in_voltageY_supply_type
+What:		/sys/.../iio:deviceX/bufferY/in_voltageY_i_type
+What:		/sys/.../iio:deviceX/bufferY/in_voltageY_q_type
+What:		/sys/.../iio:deviceX/bufferY/in_voltage_i_type
+What:		/sys/.../iio:deviceX/bufferY/in_voltage_q_type
+What:		/sys/.../iio:deviceX/bufferY/in_timestamp_type
+What:		/sys/.../iio:deviceX/bufferY/in_pressureY_type
+What:		/sys/.../iio:deviceX/bufferY/in_pressure_type
+What:		/sys/.../iio:deviceX/bufferY/in_rot_quaternion_type
+What:		/sys/.../iio:deviceX/bufferY/in_proximity_type
+KernelVersion:	5.11
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Description of the scan element data storage within the buffer
@@ -1241,6 +1374,33 @@ What:		/sys/.../iio:deviceX/scan_elements/in_pressure_index
 What:		/sys/.../iio:deviceX/scan_elements/in_rot_quaternion_index
 What:		/sys/.../iio:deviceX/scan_elements/in_proximity_index
 KernelVersion:	2.6.37
+What:		/sys/.../iio:deviceX/bufferY/in_voltageY_index
+What:		/sys/.../iio:deviceX/bufferY/in_voltageY_supply_index
+What:		/sys/.../iio:deviceX/bufferY/in_voltageY_i_index
+What:		/sys/.../iio:deviceX/bufferY/in_voltageY_q_index
+What:		/sys/.../iio:deviceX/bufferY/in_voltage_i_index
+What:		/sys/.../iio:deviceX/bufferY/in_voltage_q_index
+What:		/sys/.../iio:deviceX/bufferY/in_accel_x_index
+What:		/sys/.../iio:deviceX/bufferY/in_accel_y_index
+What:		/sys/.../iio:deviceX/bufferY/in_accel_z_index
+What:		/sys/.../iio:deviceX/bufferY/in_anglvel_x_index
+What:		/sys/.../iio:deviceX/bufferY/in_anglvel_y_index
+What:		/sys/.../iio:deviceX/bufferY/in_anglvel_z_index
+What:		/sys/.../iio:deviceX/bufferY/in_magn_x_index
+What:		/sys/.../iio:deviceX/bufferY/in_magn_y_index
+What:		/sys/.../iio:deviceX/bufferY/in_magn_z_index
+What:		/sys/.../iio:deviceX/bufferY/in_rot_from_north_magnetic_index
+What:		/sys/.../iio:deviceX/bufferY/in_rot_from_north_true_index
+What:		/sys/.../iio:deviceX/bufferY/in_rot_from_north_magnetic_tilt_comp_index
+What:		/sys/.../iio:deviceX/bufferY/in_rot_from_north_true_tilt_comp_index
+What:		/sys/.../iio:deviceX/bufferY/in_incli_x_index
+What:		/sys/.../iio:deviceX/bufferY/in_incli_y_index
+What:		/sys/.../iio:deviceX/bufferY/in_timestamp_index
+What:		/sys/.../iio:deviceX/bufferY/in_pressureY_index
+What:		/sys/.../iio:deviceX/bufferY/in_pressure_index
+What:		/sys/.../iio:deviceX/bufferY/in_rot_quaternion_index
+What:		/sys/.../iio:deviceX/bufferY/in_proximity_index
+KernelVersion:	5.11
 Contact:	linux-iio@vger.kernel.org
 Description:
 		A single positive integer specifying the position of this
@@ -1455,6 +1615,8 @@ Description:
 
 What:		/sys/bus/iio/devices/iio:deviceX/buffer/watermark
 KernelVersion:	4.2
+What:		/sys/bus/iio/devices/iio:deviceX/bufferY/watermark
+KernelVersion:	5.11
 Contact:	linux-iio@vger.kernel.org
 Description:
 		A single positive integer specifying the maximum number of scan
@@ -1473,6 +1635,8 @@ Description:
 
 What:		/sys/bus/iio/devices/iio:deviceX/buffer/data_available
 KernelVersion: 4.16
+What:		/sys/bus/iio/devices/iio:deviceX/bufferY/data_available
+KernelVersion:	5.11
 Contact:	linux-iio@vger.kernel.org
 Description:
 		A read-only value indicating the bytes of data available in the
@@ -1823,3 +1987,12 @@ Description:
 		hinge, keyboard, screen. It means the three channels
 		each correspond respectively to hinge angle, keyboard angle,
 		and screen angle.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance_hysteresis_relative
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_hysteresis_relative
+KernelVersion:	5.12
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specify the percent for light sensor relative to the channel
+		absolute value that a data field should change before an event
+		is generated. Units are a percentage of the prior reading.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 b/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8
deleted file mode 100644
index bac3d0d48b7b..000000000000
--- a/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8
+++ /dev/null
@@ -1,133 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX/in_count_count_mode_available
-What:		/sys/bus/iio/devices/iio:deviceX/in_count_noise_error_available
-What:		/sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
-What:		/sys/bus/iio/devices/iio:deviceX/in_index_index_polarity_available
-What:		/sys/bus/iio/devices/iio:deviceX/in_index_synchronous_mode_available
-KernelVersion:	4.10
-Contact:	linux-iio@vger.kernel.org
-Description:
-		This interface is deprecated; please use the Counter subsystem.
-
-		Discrete set of available values for the respective counter
-		configuration are listed in this file.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_countY_count_mode
-KernelVersion:	4.10
-Contact:	linux-iio@vger.kernel.org
-Description:
-		This interface is deprecated; please use the Counter subsystem.
-
-		Count mode for channel Y. Four count modes are available:
-		normal, range limit, non-recycle, and modulo-n. The preset value
-		for channel Y is used by the count mode where required.
-
-		Normal:
-			Counting is continuous in either direction.
-
-		Range Limit:
-			An upper or lower limit is set, mimicking limit switches
-			in the mechanical counterpart. The upper limit is set to
-			the preset value, while the lower limit is set to 0. The
-			counter freezes at count = preset when counting up, and
-			at count = 0 when counting down. At either of these
-			limits, the counting is resumed only when the count
-			direction is reversed.
-
-		Non-recycle:
-			Counter is disabled whenever a 24-bit count overflow or
-			underflow takes place. The counter is re-enabled when a
-			new count value is loaded to the counter via a preset
-			operation or write to raw.
-
-		Modulo-N:
-			A count boundary is set between 0 and the preset value.
-			The counter is reset to 0 at count = preset when
-			counting up, while the counter is set to the preset
-			value at count = 0 when counting down; the counter does
-			not freeze at the bundary points, but counts
-			continuously throughout.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_countY_noise_error
-KernelVersion:	4.10
-Contact:	linux-iio@vger.kernel.org
-Description:
-		This interface is deprecated; please use the Counter subsystem.
-
-		Read-only attribute that indicates whether excessive noise is
-		present at the channel Y count inputs in quadrature clock mode;
-		irrelevant in non-quadrature clock mode.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_countY_preset
-KernelVersion:	4.10
-Contact:	linux-iio@vger.kernel.org
-Description:
-		This interface is deprecated; please use the Counter subsystem.
-
-		If the counter device supports preset registers, the preset
-		count for channel Y is provided by this attribute.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_countY_quadrature_mode
-KernelVersion:	4.10
-Contact:	linux-iio@vger.kernel.org
-Description:
-		This interface is deprecated; please use the Counter subsystem.
-
-		Configure channel Y counter for non-quadrature or quadrature
-		clock mode. Selecting non-quadrature clock mode will disable
-		synchronous load mode. In quadrature clock mode, the channel Y
-		scale attribute selects the encoder phase division (scale of 1
-		selects full-cycle, scale of 0.5 selects half-cycle, scale of
-		0.25 selects quarter-cycle) processed by the channel Y counter.
-
-		Non-quadrature:
-			The filter and decoder circuit are bypassed. Encoder A
-			input serves as the count input and B as the UP/DOWN
-			direction control input, with B = 1 selecting UP Count
-			mode and B = 0 selecting Down Count mode.
-
-		Quadrature:
-			Encoder A and B inputs are digitally filtered and
-			decoded for UP/DN clock.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_countY_set_to_preset_on_index
-KernelVersion:	4.10
-Contact:	linux-iio@vger.kernel.org
-Description:
-		This interface is deprecated; please use the Counter subsystem.
-
-		Whether to set channel Y counter with channel Y preset value
-		when channel Y index input is active, or continuously count.
-		Valid attribute values are boolean.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_indexY_index_polarity
-KernelVersion:	4.10
-Contact:	linux-iio@vger.kernel.org
-Description:
-		This interface is deprecated; please use the Counter subsystem.
-
-		Active level of channel Y index input; irrelevant in
-		non-synchronous load mode.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_indexY_synchronous_mode
-KernelVersion:	4.10
-Contact:	linux-iio@vger.kernel.org
-Description:
-		This interface is deprecated; please use the Counter subsystem.
-
-		Configure channel Y counter for non-synchronous or synchronous
-		load mode. Synchronous load mode cannot be selected in
-		non-quadrature clock mode.
-
-		Non-synchronous:
-			A logic low level is the active level at this index
-			input. The index function (as enabled via
-			set_to_preset_on_index) is performed directly on the
-			active level of the index input.
-
-		Synchronous:
-			Intended for interfacing with encoder Index output in
-			quadrature clock mode. The active level is configured
-			via index_polarity. The index function (as enabled via
-			set_to_preset_on_index) is performed synchronously with
-			the quadrature clock on the active level of the index
-			input.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 b/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08
index 40df5c9fef99..9dae94aa880b 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08
+++ b/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08
@@ -1,11 +1,3 @@
-What:		/sys/bus/iio/devices/iio:deviceX/sensor_sensitivity
-Date:		January 2017
-KernelVersion:	4.11
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Show or set the gain boost of the amp, from 0-31 range.
-		default 31
-
 What:		/sys/bus/iio/devices/iio:deviceX/sensor_max_range
 Date:		January 2017
 KernelVersion:	4.11
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010 b/Documentation/ABI/testing/sysfs-bus-iio-humidity
index 5b78af5f341d..cb0d7e75d297 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010
+++ b/Documentation/ABI/testing/sysfs-bus-iio-humidity
@@ -6,4 +6,5 @@ Description:
 		Controls the heater device within the humidity sensor to get
 		rid of excess condensation.
 
-		Valid control values are 0 = OFF, and 1 = ON.
+		In some devices, this is just a switch in which case 0 = OFF,
+		and 1 = ON.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc100x b/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc100x
deleted file mode 100644
index b72bb62552cf..000000000000
--- a/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc100x
+++ /dev/null
@@ -1,9 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX/out_current_heater_raw
-What:		/sys/bus/iio/devices/iio:deviceX/out_current_heater_raw_available
-KernelVersion:	4.3
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Controls the heater device within the humidity sensor to get
-		rid of excess condensation.
-
-		Valid control values are 0 = OFF, and 1 = ON.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32
deleted file mode 100644
index 73498ff666bd..000000000000
--- a/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32
+++ /dev/null
@@ -1,62 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX/in_count0_preset
-KernelVersion:	4.13
-Contact:	fabrice.gasnier@st.com
-Description:
-		Reading returns the current preset value. Writing sets the
-		preset value. Encoder counts continuously from 0 to preset
-		value, depending on direction (up/down).
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
-KernelVersion:	4.13
-Contact:	fabrice.gasnier@st.com
-Description:
-		Reading returns the list possible quadrature modes.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
-KernelVersion:	4.13
-Contact:	fabrice.gasnier@st.com
-Description:
-		Configure the device counter quadrature modes:
-
-		- non-quadrature:
-			Encoder IN1 input servers as the count input (up
-			direction).
-
-		- quadrature:
-			Encoder IN1 and IN2 inputs are mixed to get direction
-			and count.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_count_polarity_available
-KernelVersion:	4.13
-Contact:	fabrice.gasnier@st.com
-Description:
-		Reading returns the list possible active edges.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_count0_polarity
-KernelVersion:	4.13
-Contact:	fabrice.gasnier@st.com
-Description:
-		Configure the device encoder/counter active edge:
-
-		- rising-edge
-		- falling-edge
-		- both-edges
-
-		In non-quadrature mode, device counts up on active edge.
-
-		In quadrature mode, encoder counting scenarios are as follows:
-
-		+---------+----------+--------------------+--------------------+
-		| Active  | Level on |      IN1 signal    |     IN2 signal     |
-		| edge    | opposite +----------+---------+----------+---------+
-		|         | signal   |  Rising  | Falling |  Rising  | Falling |
-		+---------+----------+----------+---------+----------+---------+
-		| Rising  | High ->  |   Down   |    -    |   Up     |    -    |
-		| edge    | Low  ->  |   Up     |    -    |   Down   |    -    |
-		+---------+----------+----------+---------+----------+---------+
-		| Falling | High ->  |    -     |   Up    |    -     |   Down  |
-		| edge    | Low  ->  |    -     |   Down  |    -     |   Up    |
-		+---------+----------+----------+---------+----------+---------+
-		| Both    | High ->  |   Down   |   Up    |   Up     |   Down  |
-		| edges   | Low  ->  |   Up     |   Down  |   Down   |   Up    |
-		+---------+----------+----------+---------+----------+---------+
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity b/Documentation/ABI/testing/sysfs-bus-iio-proximity
index 2172f3bb9c64..3aac6dab8775 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-proximity
+++ b/Documentation/ABI/testing/sysfs-bus-iio-proximity
@@ -8,3 +8,17 @@ Description:
 		considered close to the device. If the value read from the
 		sensor is above or equal to the value in this file an object
 		should typically be considered near.
+
+What:		/sys/bus/iio/devices/iio:deviceX/sensor_sensitivity
+Date:		March 2014
+KernelVersion:	3.15
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Proximity sensors sometimes have a controllable amplifier
+		on the signal from which time of flight measurements are
+		taken.
+		The appropriate values to take is dependent on both the
+		sensor and it's operating environment:
+		* as3935 (0-31 range)
+		18 = indoors (default)
+		14 = outdoors
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
index c59d95346341..1e5c40775a6c 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
+++ b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
@@ -6,15 +6,6 @@ Description:
 		Get the current distance in meters of storm (1km steps)
 		1000-40000 = distance in meters
 
-What:		/sys/bus/iio/devices/iio:deviceX/sensor_sensitivity
-Date:		March 2014
-KernelVersion:	3.15
-Contact:	Matt Ranostay <matt.ranostay@konsulko.com>
-Description:
-		Show or set the gain boost of the amp, from 0-31 range.
-		18 = indoors (default)
-		14 = outdoors
-
 What		/sys/bus/iio/devices/iio:deviceX/noise_level_tripped
 Date:		May 2017
 KernelVersion:	4.13
diff --git a/Documentation/devicetree/bindings/counter/interrupt-counter.yaml b/Documentation/devicetree/bindings/counter/interrupt-counter.yaml
new file mode 100644
index 000000000000..fd075d104631
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/interrupt-counter.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/interrupt-counter.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Interrupt counter
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+  A generic interrupt counter to measure interrupt frequency. It was developed
+  and used for agricultural devices to measure rotation speed of wheels or
+  other tools. Since the direction of rotation is not important, only one
+  signal line is needed.
+  Interrupts or gpios are required. If both are defined, the interrupt will
+  take precedence for counting interrupts.
+
+properties:
+  compatible:
+    const: interrupt-counter
+
+  interrupts:
+    maxItems: 1
+
+  gpios:
+    maxItems: 1
+
+required:
+  - compatible
+
+anyOf:
+  - required: [ interrupts-extended ]
+  - required: [ interrupts ]
+  - required: [ gpios ]
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    counter-0 {
+        compatible = "interrupt-counter";
+        interrupts-extended = <&gpio 0 IRQ_TYPE_EDGE_RISING>;
+    };
+
+    counter-1 {
+        compatible = "interrupt-counter";
+        gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+    };
+
+    counter-2 {
+        compatible = "interrupt-counter";
+        interrupts-extended = <&gpio 2 IRQ_TYPE_EDGE_RISING>;
+        gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
new file mode 100644
index 000000000000..911a1ae9c83f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/bosch,bmi088.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMI088 IMU accelerometer part
+
+maintainers:
+  - Mike Looijmans <mike.looijmans@topic.nl>
+
+description: |
+  Acceleration part of the IMU sensor with an SPI interface
+  Specifications about the sensor can be found at:
+    https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
+
+properties:
+  compatible:
+    enum:
+      - bosch,bmi088-accel
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency: true
+
+  vdd-supply: true
+
+  vddio-supply: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description: |
+      Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_LEVEL_LOW.
+      Two configurable interrupt lines exist.
+
+  interrupt-names:
+    description: Specify which interrupt line is in use.
+    items:
+      enum:
+        - INT1
+        - INT2
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      bmi088-accel@1 {
+        compatible = "bosch,bmi088-accel";
+        reg = <1>;
+        spi-max-frequency = <10000000>;
+        interrupt-parent = <&gpio6>;
+        interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-names = "INT2";
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
index 5b21a9fba5dd..b939f9652e3a 100644
--- a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
@@ -34,6 +34,7 @@ properties:
       - items:
           - enum:
               - mediatek,mt8183-auxadc
+              - mediatek,mt8195-auxadc
               - mediatek,mt8516-auxadc
           - const: mediatek,mt8173-auxadc
 
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
new file mode 100644
index 000000000000..e0670e3fbb72
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
@@ -0,0 +1,181 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads131e08.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADS131E0x 4-, 6- and 8-Channel ADCs
+
+maintainers:
+  - Tomislav Denis <tomislav.denis@avl.com>
+
+description: |
+  The ADS131E0x are a family of multichannel, simultaneous sampling,
+  24-bit, delta-sigma, analog-to-digital converters (ADCs) with a
+  built-in programmable gain amplifier (PGA), internal reference
+  and an onboard oscillator.
+  The communication with ADC chip is via the SPI bus (mode 1).
+
+  https://www.ti.com/lit/ds/symlink/ads131e08.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,ads131e04
+      - ti,ads131e06
+      - ti,ads131e08
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency: true
+
+  spi-cpha: true
+
+  clocks:
+    description: |
+      Device tree identifier to the clock source (2.048 MHz).
+      Note: clock source is selected using CLKSEL pin.
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: adc-clk
+
+  interrupts:
+    description: |
+      IRQ line for the ADC data ready.
+    maxItems: 1
+
+  vref-supply:
+    description: |
+      Optional external voltage reference. If not supplied, internal voltage
+      reference is used.
+
+  ti,vref-internal:
+    description: |
+      Select the internal voltage reference value.
+      0: 2.4V
+      1: 4.0V
+      If this field is left empty, 2.4V is selected.
+      Note: internal voltage reference is used only if vref-supply is not supplied.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    default: 0
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+  - clocks
+  - clock-names
+  - interrupts
+
+patternProperties:
+  "^channel@([0-7])$":
+    $ref: "adc.yaml"
+    type: object
+    description: |
+      Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: |
+          The channel number.
+          Up to 4 channels, numbered from 0 to 3 for ti,ads131e04.
+          Up to 6 channels, numbered from 0 to 5 for ti,ads131e06.
+          Up to 8 channels, numbered from 0 to 7 for ti,ads131e08.
+        items:
+          minimum: 0
+          maximum: 7
+
+      ti,gain:
+        description: |
+          The PGA gain value for the channel.
+          If this field is left empty, PGA gain 1 is used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [1, 2, 4, 8, 12]
+        default: 1
+
+      ti,mux:
+        description: |
+          Channel input selection(muliplexer).
+          0: Normal input.
+          1: Input shorted to (VREFP + VREFN) / 2 (for offset or noise measurements).
+          3: MVDD (for supply measurement)
+          4: Temperature sensor
+          If this field is left empty, normal input is selected.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 3, 4]
+        default: 0
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "ti,ads131e08";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        spi-cpha;
+        clocks = <&clk2048k>;
+        clock-names = "adc-clk";
+        interrupt-parent = <&gpio5>;
+        interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+        vref-supply = <&adc_vref>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+          reg = <0>;
+        };
+
+        channel@1 {
+          reg = <1>;
+        };
+
+        channel@2 {
+          reg = <2>;
+          ti,gain = <2>;
+        };
+
+        channel@3 {
+          reg = <3>;
+        };
+
+        channel@4 {
+          reg = <4>;
+        };
+
+        channel@5 {
+          reg = <5>;
+        };
+
+        channel@6 {
+          reg = <6>;
+        };
+
+        channel@7 {
+          reg = <7>;
+          ti,mux = <4>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml b/Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml
new file mode 100644
index 000000000000..2155d3f5666c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/cdc/adi,ad7150.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog device AD7150 and similar capacitance to digital convertors.
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7150
+      - adi,ad7151
+      - adi,ad7156
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  interrupts: true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7150
+              - adi,ad7156
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad7151
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cdc@48 {
+            compatible = "adi,ad7150";
+            reg = <0x48>;
+            interrupts = <25 2>, <26 2>;
+            interrupt-parent = <&gpio>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
index 79fba1508e89..a7574210175a 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
@@ -71,15 +71,6 @@ properties:
     minimum: 0
     maximum: 3
 
-  adi,scaled-output-hz:
-    description:
-      This property must be present if the clock mode is scaled-sync through
-      clock-names property. In this mode, the input clock can have a range
-      of 1Hz to 128HZ which must be scaled to originate an allowable sample
-      rate. This property specifies that rate.
-    minimum: 1900
-    maximum: 2100
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml b/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml
new file mode 100644
index 000000000000..099b4be927d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS EC MKBP Proximity Sensor
+
+maintainers:
+  - Stephen Boyd <swboyd@chromium.org>
+  - Benson Leung <bleung@chromium.org>
+  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
+
+description: |
+  Google's ChromeOS EC sometimes has the ability to detect user proximity.
+  This is implemented on the EC as near/far logic and exposed to the OS
+  via an MKBP switch bit.
+
+properties:
+  compatible:
+    const: google,cros-ec-mkbp-proximity
+
+  label:
+    description: Name for proximity sensor
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    proximity {
+      compatible = "google,cros-ec-mkbp-proximity";
+      label = "proximity-wifi-lte";
+    };
diff --git a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
index db291a9390b7..7e98f47987dc 100644
--- a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
+++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
@@ -66,6 +66,7 @@ properties:
       - st,lis3mdl-magn
       - st,lis2mdl
       - st,lsm9ds1-magn
+      - st,iis2mdc
         # Pressure sensors
       - st,lps001wp-press
       - st,lps25h-press
diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
index 76bf16ee27ec..4dfa70a013ae 100644
--- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
+++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
@@ -94,6 +94,9 @@ properties:
   keyboard-controller:
     $ref: "/schemas/input/google,cros-ec-keyb.yaml#"
 
+  proximity:
+    $ref: "/schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#"
+
   codecs:
     type: object
     additionalProperties: false
@@ -180,6 +183,10 @@ examples:
             interrupts = <99 0>;
             interrupt-parent = <&gpio7>;
             spi-max-frequency = <5000000>;
+
+            proximity {
+                    compatible = "google,cros-ec-mkbp-proximity";
+            };
         };
     };
 
diff --git a/Documentation/driver-api/driver-model/devres.rst b/Documentation/driver-api/driver-model/devres.rst
index cd8b6e657b94..5f8c6c303ff2 100644
--- a/Documentation/driver-api/driver-model/devres.rst
+++ b/Documentation/driver-api/driver-model/devres.rst
@@ -285,7 +285,8 @@ I2C
 IIO
   devm_iio_device_alloc()
   devm_iio_device_register()
-  devm_iio_kfifo_allocate()
+  devm_iio_dmaengine_buffer_setup()
+  devm_iio_kfifo_buffer_setup()
   devm_iio_triggered_buffer_setup()
   devm_iio_trigger_alloc()
   devm_iio_trigger_register()
diff --git a/Documentation/driver-api/iio/buffers.rst b/Documentation/driver-api/iio/buffers.rst
index 3ddebddc02ca..e83026aebe97 100644
--- a/Documentation/driver-api/iio/buffers.rst
+++ b/Documentation/driver-api/iio/buffers.rst
@@ -28,24 +28,26 @@ IIO buffer setup
 The meta information associated with a channel reading placed in a buffer is
 called a scan element. The important bits configuring scan elements are
 exposed to userspace applications via the
-:file:`/sys/bus/iio/iio:device{X}/scan_elements/*` directory. This file contains
+:file:`/sys/bus/iio/iio:device{X}/scan_elements/` directory. This directory contains
 attributes of the following form:
 
 * :file:`enable`, used for enabling a channel. If and only if its attribute
   is non *zero*, then a triggered capture will contain data samples for this
   channel.
+* :file:`index`, the scan_index of the channel.
 * :file:`type`, description of the scan element data storage within the buffer
   and hence the form in which it is read from user space.
-  Format is [be|le]:[s|u]bits/storagebitsXrepeat[>>shift] .
+  Format is [be|le]:[s|u]bits/storagebits[Xrepeat][>>shift] .
+
   * *be* or *le*, specifies big or little endian.
   * *s* or *u*, specifies if signed (2's complement) or unsigned.
   * *bits*, is the number of valid data bits.
   * *storagebits*, is the number of bits (after padding) that it occupies in the
-  buffer.
-  * *shift*, if specified, is the shift that needs to be applied prior to
-  masking out unused bits.
+    buffer.
   * *repeat*, specifies the number of bits/storagebits repetitions. When the
-  repeat element is 0 or 1, then the repeat value is omitted.
+    repeat element is 0 or 1, then the repeat value is omitted.
+  * *shift*, if specified, is the shift that needs to be applied prior to
+    masking out unused bits.
 
 For example, a driver for a 3-axis accelerometer with 12 bit resolution where
 data is stored in two 8-bits registers as follows::
@@ -122,4 +124,3 @@ More details
 .. kernel-doc:: include/linux/iio/buffer.h
 .. kernel-doc:: drivers/iio/industrialio-buffer.c
    :export:
-
diff --git a/Documentation/iio/iio_configfs.rst b/Documentation/iio/iio_configfs.rst
index 3a5d76f9e2b9..b276397af797 100644
--- a/Documentation/iio/iio_configfs.rst
+++ b/Documentation/iio/iio_configfs.rst
@@ -71,7 +71,7 @@ kernel module following the interface in include/linux/iio/sw_trigger.h::
 	.ops = &iio_trig_sample_ops,
   };
 
-module_iio_sw_trigger_driver(iio_trig_sample);
+  module_iio_sw_trigger_driver(iio_trig_sample);
 
 Each trigger type has its own directory under /config/iio/triggers. Loading
 iio-trig-sample module will create 'trig-sample' trigger type directory
@@ -99,3 +99,4 @@ Each trigger can have one or more attributes specific to the trigger type.
 
 "hrtimer" trigger type doesn't have any configurable attribute from /config dir.
 It does introduce the sampling_frequency attribute to trigger directory.
+That attribute sets the polling frequency in Hz, with mHz precision.
diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst
index 1c28b8ef6677..5618a39456df 100644
--- a/Documentation/userspace-api/ioctl/ioctl-number.rst
+++ b/Documentation/userspace-api/ioctl/ioctl-number.rst
@@ -245,6 +245,7 @@ Code  Seq#    Include File                                           Comments
 'i'   00-3F  linux/i2o-dev.h                                         conflict!
 'i'   0B-1F  linux/ipmi.h                                            conflict!
 'i'   80-8F  linux/i8k.h
+'i'   90-9F  `linux/iio/*.h`                                         IIO
 'j'   00-3F  linux/joystick.h
 'k'   00-0F  linux/spi/spidev.h                                      conflict!
 'k'   00-05  video/kyro.h                                            conflict!