Merge branch 'clockevents/3.16' of git://git.linaro.org/people/daniel.lezcano/linux into timers/core

This pull request contains the following changes:

* Laurent Pinchart did a lot of modifications to prepare the DT
  support.  These modifications include a lot of cleanup (structure
  renaming, preparation to support multiple channel, kzalloc usage,
  ...) and then finishes to drop the old code to the new one.

* Jingoo Han removed the dev_err when an allocation fails because this
  error is already given by the mm subsystems.

* Matthew Leach added the ARM global timer with vexpress, enabled the
  ARM global timer with the A5 and added the definition in the DT. He
  also fixed a invalid check when looking for an usable ARM global
  timer for A9

* Maxime Ripard added the support for AllWinner A31 for sun4i and made
  the timer reset optional through the DT

* Stephen Boyd used the msm timer for the udelay

* Uwe Kleine-König fixed the non-standard 'compatible' binding for efm32

* Xiubo Li clarified the types for the clocksource_mmio_read* and
  added a new Flextimer Module (FTM) with its bindings

* Yang Wei added the 'notrace' attribute to 'read_sched_clock' for the
  dw_apb_timer

4 files changed, 42 insertions, 4 deletions

diff --git a/Documentation/devicetree/bindings/arm/global_timer.txt b/Documentation/devicetree/bindings/arm/global_timer.txt
index 1e548981eda4..bdae3a818793 100644
--- a/Documentation/devicetree/bindings/arm/global_timer.txt
+++ b/Documentation/devicetree/bindings/arm/global_timer.txt
@@ -4,8 +4,11 @@
 
 ** Timer node required properties:
 
-- compatible : Should be "arm,cortex-a9-global-timer"
-		Driver supports versions r2p0 and above.
+- compatible : should contain
+	     * "arm,cortex-a5-global-timer" for Cortex-A5 global timers.
+	     * "arm,cortex-a9-global-timer" for Cortex-A9 global
+	         timers or any compatible implementation. Note: driver
+	         supports versions r2p0 and above.
 
 - interrupts : One interrupt to each core
 
diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
index 7c26154b8bbb..27cfc7d7ccd7 100644
--- a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
@@ -9,6 +9,9 @@ Required properties:
 		one)
 - clocks: phandle to the source clock (usually the AHB clock)
 
+Optionnal properties:
+- resets: phandle to a reset controller asserting the timer
+
 Example:
 
 timer@01c60000 {
@@ -19,4 +22,5 @@ timer@01c60000 {
 		     <0 53 1>,
 		     <0 54 1>;
 	clocks = <&ahb1_gates 19>;
+	resets = <&ahb1rst 19>;
 };
diff --git a/Documentation/devicetree/bindings/timer/efm32,timer.txt b/Documentation/devicetree/bindings/timer/energymicro,efm32-timer.txt
index 97a568f696c9..e502c11b2211 100644
--- a/Documentation/devicetree/bindings/timer/efm32,timer.txt
+++ b/Documentation/devicetree/bindings/timer/energymicro,efm32-timer.txt
@@ -6,7 +6,7 @@ channels and can be used as PWM or Quadrature Decoder. Available clock sources
 are the cpu's HFPERCLK (with a 10-bit prescaler) or an external pin.
 
 Required properties:
-- compatible : Should be efm32,timer
+- compatible : Should be "energymicro,efm32-timer"
 - reg : Address and length of the register set
 - clocks : Should contain a reference to the HFPERCLK
 
@@ -16,7 +16,7 @@ Optional properties:
 Example:
 
 timer@40010c00 {
-	compatible = "efm32,timer";
+	compatible = "energymicro,efm32-timer";
 	reg = <0x40010c00 0x400>;
 	interrupts = <14>;
 	clocks = <&cmu clk_HFPERCLKTIMER3>;
diff --git a/Documentation/devicetree/bindings/timer/fsl,ftm-timer.txt b/Documentation/devicetree/bindings/timer/fsl,ftm-timer.txt
new file mode 100644
index 000000000000..aa8c40230e5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/fsl,ftm-timer.txt
@@ -0,0 +1,31 @@
+Freescale FlexTimer Module (FTM) Timer
+
+Required properties:
+
+- compatible : should be "fsl,ftm-timer"
+- reg : Specifies base physical address and size of the register sets for the
+  clock event device and clock source device.
+- interrupts : Should be the clock event device interrupt.
+- clocks : The clocks provided by the SoC to drive the timer, must contain an
+  entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+  o "ftm-evt"
+  o "ftm-src"
+  o "ftm-evt-counter-en"
+  o "ftm-src-counter-en"
+- big-endian: One boolean property, the big endian mode will be in use if it is
+  present, or the little endian mode will be in use for all the device registers.
+
+Example:
+ftm: ftm@400b8000 {
+	compatible = "fsl,ftm-timer";
+	reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
+	interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
+	clock-names = "ftm-evt", "ftm-src",
+		"ftm-evt-counter-en", "ftm-src-counter-en";
+	clocks = <&clks VF610_CLK_FTM2>,
+		<&clks VF610_CLK_FTM3>,
+		<&clks VF610_CLK_FTM2_EXT_FIX_EN>,
+		<&clks VF610_CLK_FTM3_EXT_FIX_EN>;
+	big-endian;
+};