summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-05-01 23:02:00 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2017-05-01 23:02:00 +0300
commit7f2ebde737c933d75718a1fca933af4e9d53006b (patch)
treed810b2c1396c246e8c0d867b65a0010acbdfd985 /Documentation
parentcdbfbba98c151886a8e74116fbd8ba14e8200cb4 (diff)
parent6c381663bb3b4febc15b2fb33f046f0b986ce5c5 (diff)
downloadlinux-7f2ebde737c933d75718a1fca933af4e9d53006b.tar.xz
Merge tag 'for-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel: "New drivers: - gemini-poweroff - cpcap-charger (for Motorola Droid 4) - battery-lego-ev3 (for LEGO Mindstorms EV3) New chip/feature support: - bq24190-charger: add runtime PM support - bq24190-charger: add bq24192i support - register masking for syscon-poweroff ... and misc small fixes & cleanups * tag 'for-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (29 commits) power: supply: bq24190_charger: Use new extcon_register_notifier_all() power: supply: bq24190_charger: Longer delay while polling reset flag power: supply: bq24190_charger: Uniform pm_runtime_get() failure handling power: supply: bq24190_charger: Clean up extcon code power: supply: bq24190_charger: Limit over/under voltage fault logging power: supply: New driver for LEGO MINDSTORMS EV3 battery dt-bindings: power: supply: New bindings for LEGO MINDSTORMS EV3 battery power: supply: tps65217: remove debug messages for function calls power: supply: ltc2941-battery-gauge: Add OF device ID table power: supply: ltc2941-battery-gauge: Add vendor to compatibles in binding power: supply: charger-manager: simplify return statements power: supply: lp8788: prevent out of bounds array access power: supply: cpcap-charger: Add minimal CPCAP PMIC battery charger power: supply: bq24190_charger: Use extcon to determine ilimit, 5v boost power: supply: bq24190_charger: Add support for bq24192i power: supply: bq24190_charger: Use i2c-core irq-mapping code power: bq24190_charger: mark PM functions as __maybe_unused power: supply: sbs-charger: simplified bool function power: supply: ab8500: Replaced spaces with tabs in indent power: supply: bq25890: Use gpiod_get() ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/power/reset/gemini-poweroff.txt17
-rw-r--r--Documentation/devicetree/bindings/power/reset/syscon-poweroff.txt11
-rw-r--r--Documentation/devicetree/bindings/power/supply/cpcap-charger.txt37
-rw-r--r--Documentation/devicetree/bindings/power/supply/lego_ev3_battery.txt21
-rw-r--r--Documentation/devicetree/bindings/power/supply/ltc2941.txt6
-rw-r--r--Documentation/devicetree/bindings/power/supply/max8925_battery.txt (renamed from Documentation/devicetree/bindings/power/supply/max8925_batter.txt)0
6 files changed, 87 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/power/reset/gemini-poweroff.txt b/Documentation/devicetree/bindings/power/reset/gemini-poweroff.txt
new file mode 100644
index 000000000000..7fec3e100214
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/gemini-poweroff.txt
@@ -0,0 +1,17 @@
+* Device-Tree bindings for Cortina Systems Gemini Poweroff
+
+This is a special IP block in the Cortina Gemini SoC that only
+deals with different ways to power the system down.
+
+Required properties:
+- compatible: should be "cortina,gemini-power-controller"
+- reg: should contain the physical memory base and size
+- interrupts: should contain the power management interrupt
+
+Example:
+
+power-controller@4b000000 {
+ compatible = "cortina,gemini-power-controller";
+ reg = <0x4b000000 0x100>;
+ interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+};
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.txt b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.txt
index 1e2546f8b08a..022ed1f3bc80 100644
--- a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.txt
+++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.txt
@@ -3,13 +3,20 @@ Generic SYSCON mapped register poweroff driver
This is a generic poweroff driver using syscon to map the poweroff register.
The poweroff is generally performed with a write to the poweroff register
defined by the register map pointed by syscon reference plus the offset
-with the mask defined in the poweroff node.
+with the value and mask defined in the poweroff node.
Required properties:
- compatible: should contain "syscon-poweroff"
- regmap: this is phandle to the register map node
- offset: offset in the register map for the poweroff register (in bytes)
-- mask: the poweroff value written to the poweroff register (32 bit access)
+- value: the poweroff value written to the poweroff register (32 bit access)
+
+Optional properties:
+- mask: update only the register bits defined by the mask (32 bit)
+
+Legacy usage:
+If a node doesn't contain a value property but contains a mask property, the
+mask property is used as the value.
Default will be little endian mode, 32 bit access only.
diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt b/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt
new file mode 100644
index 000000000000..80bd873c3b1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt
@@ -0,0 +1,37 @@
+Motorola CPCAP PMIC battery charger binding
+
+Required properties:
+- compatible: Shall be "motorola,mapphone-cpcap-charger"
+- interrupts: Interrupt specifier for each name in interrupt-names
+- interrupt-names: Should contain the following entries:
+ "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
+ "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb"
+- io-channels: IIO ADC channel specifier for each name in io-channel-names
+- io-channel-names: Should contain the following entries:
+ "battdetb", "battp", "vbus", "chg_isense", "batti"
+
+Optional properties:
+- mode-gpios: Optionally CPCAP charger can have a companion wireless
+ charge controller that is controlled with two GPIOs
+ that are active low.
+
+Example:
+
+cpcap_charger: charger {
+ compatible = "motorola,mapphone-cpcap-charger";
+ interrupts-extended = <
+ &cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0
+ &cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0
+ >;
+ interrupt-names =
+ "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
+ "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb";
+ mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW
+ &gpio3 23 GPIO_ACTIVE_LOW>;
+ io-channels = <&cpcap_adc 0 &cpcap_adc 1
+ &cpcap_adc 2 &cpcap_adc 5
+ &cpcap_adc 6>;
+ io-channel-names = "battdetb", "battp",
+ "vbus", "chg_isense",
+ "batti";
+};
diff --git a/Documentation/devicetree/bindings/power/supply/lego_ev3_battery.txt b/Documentation/devicetree/bindings/power/supply/lego_ev3_battery.txt
new file mode 100644
index 000000000000..5485633b1faa
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/lego_ev3_battery.txt
@@ -0,0 +1,21 @@
+LEGO MINDSTORMS EV3 Battery
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+LEGO MINDSTORMS EV3 has some built-in capability for monitoring the battery.
+It uses 6 AA batteries or a special Li-ion rechargeable battery pack that is
+detected by a key switch in the battery compartment.
+
+Required properties:
+ - compatible: Must be "lego,ev3-battery"
+ - io-channels: phandles to analog inputs for reading voltage and current
+ - io-channel-names: Must be "voltage", "current"
+ - rechargeable-gpios: phandle to the rechargeable battery indication gpio
+
+Example:
+
+ battery {
+ compatible = "lego,ev3-battery";
+ io-channels = <&adc 4>, <&adc 3>;
+ io-channel-names = "voltage", "current";
+ rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>;
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/ltc2941.txt b/Documentation/devicetree/bindings/power/supply/ltc2941.txt
index ea42ae12d924..a9d7aa60558b 100644
--- a/Documentation/devicetree/bindings/power/supply/ltc2941.txt
+++ b/Documentation/devicetree/bindings/power/supply/ltc2941.txt
@@ -6,8 +6,8 @@ temperature monitoring, and uses a slightly different conversion
formula for the charge counter.
Required properties:
-- compatible: Should contain "ltc2941" or "ltc2943" which also indicates the
- type of I2C chip attached.
+- compatible: Should contain "lltc,ltc2941" or "lltc,ltc2943" which also
+ indicates the type of I2C chip attached.
- reg: The 7-bit I2C address.
- lltc,resistor-sense: The sense resistor value in milli-ohms. Can be a 32-bit
negative value when the battery has been connected to the wrong end of the
@@ -20,7 +20,7 @@ Required properties:
Example from the Topic Miami Florida board:
fuelgauge: ltc2943@64 {
- compatible = "ltc2943";
+ compatible = "lltc,ltc2943";
reg = <0x64>;
lltc,resistor-sense = <15>;
lltc,prescaler-exponent = <5>; /* 2^(2*5) = 1024 */
diff --git a/Documentation/devicetree/bindings/power/supply/max8925_batter.txt b/Documentation/devicetree/bindings/power/supply/max8925_battery.txt
index d7e3e0c0f71d..d7e3e0c0f71d 100644
--- a/Documentation/devicetree/bindings/power/supply/max8925_batter.txt
+++ b/Documentation/devicetree/bindings/power/supply/max8925_battery.txt