summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-05-07 22:02:18 +0400
committerLinus Torvalds <torvalds@linux-foundation.org>2013-05-07 22:02:18 +0400
commitfcba914542082b272f31c8e4c40000b88ed3208d (patch)
treefb28069bf571d93420daafd501b4e97f221d526c /Documentation
parenta8c4b90e670be3b01e9395c7310639c8109fc77e (diff)
parent5c5f0421a8eea5bdaba9b9313c5bb4833aeb39cd (diff)
downloadlinux-fcba914542082b272f31c8e4c40000b88ed3208d.tar.xz
Merge tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates (part 3) from Arnd Bergmann: "This is the third and smallest of the SoC specific updates. Changes include: - SMP support for the Xilinx zynq platform - Smaller imx changes - LPAE support for mvebu - Moving the orion5x, kirkwood, dove and mvebu platforms to a common "mbus" driver for their internal devices. It would be good to get feedback on the location of the "mbus" driver. Since this is used on multiple platforms may potentially get shared with other architectures (powerpc and arm64), it was moved to drivers/bus/. We expect other similar drivers to get moved to the same place in order to avoid creating more top-level directories under drivers/ or cluttering up the messy drivers/misc/ even more." * tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) ARM: imx: reset_controller may be disabled ARM: mvebu: Align the internal registers virtual base to support LPAE ARM: mvebu: Limit the DMA zone when LPAE is selected arm: plat-orion: remove addr-map code arm: mach-mv78xx0: convert to use the mvebu-mbus driver arm: mach-orion5x: convert to use mvebu-mbus driver arm: mach-dove: convert to use mvebu-mbus driver arm: mach-kirkwood: convert to use mvebu-mbus driver arm: mach-mvebu: convert to use mvebu-mbus driver ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock ARM i.MX53: tve_di clock is not part of the CCM, but of TVE ARM i.MX53: make tve_ext_sel propagate rate change to PLL ARM i.MX53: Remove unused tve_gate clkdev entry ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree ARM: i.MX5: Add PATA and SRTC clocks ARM: imx: do not bring up unavailable cores ARM: imx: add initial imx6dl support ARM: imx1: mm: add call to mxc_device_init ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/clock/imx5-clock.txt14
-rw-r--r--Documentation/devicetree/bindings/clock/imx6q-clock.txt3
-rw-r--r--Documentation/devicetree/bindings/reset/fsl,imx-src.txt49
-rw-r--r--Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt3
4 files changed, 68 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt
index 2a0c904c46ae..d71b4b2c077d 100644
--- a/Documentation/devicetree/bindings/clock/imx5-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.txt
@@ -38,7 +38,6 @@ clocks and IDs.
usb_phy_podf 23
cpu_podf 24
di_pred 25
- tve_di 26
tve_s 27
uart1_ipg_gate 28
uart1_per_gate 29
@@ -172,6 +171,19 @@ clocks and IDs.
can1_serial_gate 157
can1_ipg_gate 158
owire_gate 159
+ gpu3d_s 160
+ gpu2d_s 161
+ gpu3d_gate 162
+ gpu2d_gate 163
+ garb_gate 164
+ cko1_sel 165
+ cko1_podf 166
+ cko1 167
+ cko2_sel 168
+ cko2_podf 169
+ cko2 170
+ srtc_gate 171
+ pata_gate 172
Examples (for mx53):
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index 969b38e06ad3..6deb6fd1c7cd 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -205,6 +205,9 @@ clocks and IDs.
enet_ref 190
usbphy1_gate 191
usbphy2_gate 192
+ pll4_post_div 193
+ pll5_post_div 194
+ pll5_video_div 195
Examples:
diff --git a/Documentation/devicetree/bindings/reset/fsl,imx-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx-src.txt
new file mode 100644
index 000000000000..13301777e11c
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/fsl,imx-src.txt
@@ -0,0 +1,49 @@
+Freescale i.MX System Reset Controller
+======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "fsl,<chip>-src"
+- reg: should be register base and length as documented in the
+ datasheet
+- interrupts: Should contain SRC interrupt and CPU WDOG interrupt,
+ in this order.
+- #reset-cells: 1, see below
+
+example:
+
+src: src@020d8000 {
+ compatible = "fsl,imx6q-src";
+ reg = <0x020d8000 0x4000>;
+ interrupts = <0 91 0x04 0 96 0x04>;
+ #reset-cells = <1>;
+};
+
+Specifying reset lines connected to IP modules
+==============================================
+
+The system reset controller can be used to reset the GPU, VPU,
+IPU, and OpenVG IP modules on i.MX5 and i.MX6 ICs. Those device
+nodes should specify the reset line on the SRC in their resets
+property, containing a phandle to the SRC device node and a
+RESET_INDEX specifying which module to reset, as described in
+reset.txt
+
+example:
+
+ ipu1: ipu@02400000 {
+ resets = <&src 2>;
+ };
+ ipu2: ipu@02800000 {
+ resets = <&src 4>;
+ };
+
+The following RESET_INDEX values are valid for i.MX5:
+GPU_RESET 0
+VPU_RESET 1
+IPU1_RESET 2
+OPEN_VG_RESET 3
+The following additional RESET_INDEX value is valid for i.MX6:
+IPU2_RESET 4
diff --git a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
index 8071ac20d4b3..b876d4925a57 100644
--- a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
+++ b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
@@ -8,6 +8,8 @@ Required properties:
- interrupts: Should contain sync interrupt and error interrupt,
in this order.
- #crtc-cells: 1, See below
+- resets: phandle pointing to the system reset controller and
+ reset line index, see reset/fsl,imx-src.txt for details
example:
@@ -16,6 +18,7 @@ ipu: ipu@18000000 {
compatible = "fsl,imx53-ipu";
reg = <0x18000000 0x080000000>;
interrupts = <11 10>;
+ resets = <&src 2>;
};
Parallel display support