summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-05-21 20:42:11 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2016-05-21 20:42:11 +0300
commit63d222b9d277c4d7bf08afd1631a7f8e327a825c (patch)
tree5a7167eebe02730c62b3137c9b9e89fa45329db7 /Documentation
parent10cd7158042bf9c949c19dbf0c7ee600d198ed39 (diff)
parentb9ba1eb0336877b9b83556fd30d2becda110fd8c (diff)
downloadlinux-63d222b9d277c4d7bf08afd1631a7f8e327a825c.tar.xz
Merge tag 'rtc-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni: "Subsystem wide cleanups: - Use IS_ENABLED() instead of checking for built-in or module - remove useless DRV_VERSION - remove CLK_IS_ROOT - remove UIE signaling Drivers: - ds1302: rewritten to be a proper SPI device driver - m41t80: huge cleanup, alarm, wakelarm ans oscialltor failure detection support - rv3029: switch to regmap to handle rv3049, alarm support, fixes - zynqmp: enable switching to battery power, fixes - small fixes for at91sam9, da9053, ds1307, ds1685, ds3232, r2025, sa1100, snvs, stmp3xxx, tps6586x" * tag 'rtc-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (40 commits) rtc: tps6586x: rename so module can be autoloaded rtc: rv3029: hide unused i2c device table rtc: rs5c372: r2025: fix check for 'oscillator halted' condition rtc: rv3029: add alarm IRQ rtc: rv3029: fix set_time function rtc: rv3029: fix alarm support rtc: rv3029: Remove some checks and warnings rtc: rv3029: Add support of RV3049 rtc: rv3029: convert to use regmap rtc: rv3029: remove 'i2c' in functions names rtc: stmp3xxx: print message on error rtc: Use IS_ENABLED() instead of checking for built-in or module rtc: ds3232: fix call trace when rtc->ops_lock is used as NULL rtc: snvs: return error in case enable_irq_wake fails rtc: zynqmp: Update seconds time programming logic rtc: sa1100: DT spelling s/interrupt-name/interrupt-names/ rtc: mc13xxx: remove UIE signaling rtc: mxc: remove UIE signaling rtc: ds1307: Remove CLK_IS_ROOT rtc: hym8563: Remove CLK_IS_ROOT ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/rtc/maxim-ds1302.txt46
-rw-r--r--Documentation/devicetree/bindings/rtc/sa1100-rtc.txt2
2 files changed, 47 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/rtc/maxim-ds1302.txt b/Documentation/devicetree/bindings/rtc/maxim-ds1302.txt
new file mode 100644
index 000000000000..ba470c56cdec
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/maxim-ds1302.txt
@@ -0,0 +1,46 @@
+* Maxim/Dallas Semiconductor DS-1302 RTC
+
+Simple device which could be used to store date/time between reboots.
+
+The device uses the standard MicroWire half-duplex transfer timing.
+Master output is set on low clock and sensed by the RTC on the rising
+edge. Master input is set by the RTC on the trailing edge and is sensed
+by the master on low clock.
+
+Required properties:
+
+- compatible : Should be "maxim,ds1302"
+
+Required SPI properties:
+
+- reg : Should be address of the device chip select within
+ the controller.
+
+- spi-max-frequency : DS-1302 has 500 kHz if powered at 2.2V,
+ and 2MHz if powered at 5V.
+
+- spi-3wire : The device has a shared signal IN/OUT line.
+
+- spi-lsb-first : DS-1302 requires least significant bit first
+ transfers.
+
+- spi-cs-high: DS-1302 has active high chip select line. This is
+ required unless inverted in hardware.
+
+Example:
+
+spi@901c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "icpdas,lp8841-spi-rtc";
+ reg = <0x901c 0x1>;
+
+ rtc@0 {
+ compatible = "maxim,ds1302";
+ reg = <0>;
+ spi-max-frequency = <500000>;
+ spi-3wire;
+ spi-lsb-first;
+ spi-cs-high;
+ };
+};
diff --git a/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt b/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt
index 0cda19ad4859..968ac820254b 100644
--- a/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt
@@ -13,5 +13,5 @@ Example:
compatible = "mrvl,mmp-rtc";
reg = <0xd4010000 0x1000>;
interrupts = <5>, <6>;
- interrupt-name = "rtc 1Hz", "rtc alarm";
+ interrupt-names = "rtc 1Hz", "rtc alarm";
};