summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-01-27 22:18:55 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2020-01-27 22:18:55 +0300
commitaae1464f46a2403565f75717438118691d31ccf1 (patch)
tree17887992bc955719d5cc449bee73b90f8284d7ed /Documentation
parent1e1ab4ba4747afad3e44a77dded1bab4cb77049e (diff)
parente4e4c2ff78edd2f9c7d2d3e588ca68ffa1dd8dc8 (diff)
downloadlinux-aae1464f46a2403565f75717438118691d31ccf1.tar.xz
Merge tag 'regulator-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown: "Hardly anything going on in the core this time around with the regulator API and pretty quiet on the driver front: - An API for comparing regulators, useful for devices that need to check if supply voltages exactly match rather than just nominally match. - Conversion of several DT bindings to YAML format. - Conversion of I2C drivers to probe_new(). - New drivers for Monolithic MPQ7920 and MP8859, and Rohm BD71828" * tag 'regulator-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (34 commits) dt-bindings: regulator: add document bindings for mpq7920 regulator: core: Fix exported symbols to the exported GPL version regulator: mpq7920: Fix incorrect defines regulator: vqmmc-ipq4019: Fix platform_no_drv_owner.cocci warnings regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage regulator fix for "regulator: core: Add regulator_is_equal() helper" regulator: core: Add regulator_is_equal() helper regulator: mpq7920: Convert to use .probe_new regulator: mpq7920: Remove unneeded fields from struct mpq7920_regulator_info regulator: vqmmc-ipq4019: Trivial clean up regulator: vqmmc-ipq4019: Remove ipq4019_regulator_remove regulator: bindings: Drop document bindings for mpq7920 dt-bindings: Drop entry for Monolithic Power System, MPS regulator: bd718x7: Simplify the code by removing struct bd718xx_pmic_inits regulator: add IPQ4019 SDHCI VQMMC LDO driver regulator: Convert i2c drivers to use .probe_new regulator: mpq7920: Check the correct variable in mpq7920_regulator_register() regulator: mpq7920: Fix Woverflow warning on conversion regulator: mp8859: tidy up white space in probe regulator: mpq7920: add mpq7920 regulator driver ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/regulator/mp8859.txt22
-rw-r--r--Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml121
-rw-r--r--Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml107
-rw-r--r--Documentation/devicetree/bindings/regulator/st,stm32-booster.txt18
-rw-r--r--Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml46
-rw-r--r--Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt20
-rw-r--r--Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml52
-rw-r--r--Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt43
-rw-r--r--Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml64
9 files changed, 412 insertions, 81 deletions
diff --git a/Documentation/devicetree/bindings/regulator/mp8859.txt b/Documentation/devicetree/bindings/regulator/mp8859.txt
new file mode 100644
index 000000000000..74ad69730989
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mp8859.txt
@@ -0,0 +1,22 @@
+Monolithic Power Systems MP8859 voltage regulator
+
+Required properties:
+- compatible: "mps,mp8859";
+- reg: I2C slave address.
+
+Optional subnode for regulator: "mp8859_dcdc", using common regulator
+bindings given in <Documentation/devicetree/bindings/regulator/regulator.txt>.
+
+Example:
+
+ mp8859: regulator@66 {
+ compatible = "mps,mp8859";
+ reg = <0x66>;
+ dc_12v: mp8859_dcdc {
+ regulator-name = "dc_12v";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
new file mode 100644
index 000000000000..a682af0dc67e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mps,mpq7920.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Monolithic Power System MPQ7920 PMIC
+
+maintainers:
+ - Saravanan Sekar <sravanhome@gmail.com>
+
+properties:
+ $nodename:
+ pattern: "pmic@[0-9a-f]{1,2}"
+ compatible:
+ enum:
+ - mps,mpq7920
+
+ reg:
+ maxItems: 1
+
+ regulators:
+ type: object
+ allOf:
+ - $ref: regulator.yaml#
+ description: |
+ list of regulators provided by this controller, must be named
+ after their hardware counterparts BUCK[1-4], one LDORTC, and LDO[2-5]
+
+ properties:
+ mps,switch-freq:
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint8"
+ enum: [ 0, 1, 2, 3 ]
+ default: 2
+ description: |
+ switching frequency must be one of following corresponding value
+ 1.1MHz, 1.65MHz, 2.2MHz, 2.75MHz
+
+ patternProperties:
+ "^ldo[1-4]$":
+ type: object
+ allOf:
+ - $ref: regulator.yaml#
+
+ "^ldortc$":
+ type: object
+ allOf:
+ - $ref: regulator.yaml#
+
+ "^buck[1-4]$":
+ type: object
+ allOf:
+ - $ref: regulator.yaml#
+
+ properties:
+ mps,buck-softstart:
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint8"
+ enum: [ 0, 1, 2, 3 ]
+ description: |
+ defines the soft start time of this buck, must be one of the following
+ corresponding values 150us, 300us, 610us, 920us
+
+ mps,buck-phase-delay:
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint8"
+ enum: [ 0, 1, 2, 3 ]
+ description: |
+ defines the phase delay of this buck, must be one of the following
+ corresponding values 0deg, 90deg, 180deg, 270deg
+
+ mps,buck-ovp-disable:
+ type: boolean
+ description: |
+ disables over voltage protection of this buck
+
+ additionalProperties: false
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - regulators
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@69 {
+ compatible = "mps,mpq7920";
+ reg = <0x69>;
+
+ regulators {
+ mps,switch-freq = /bits/ 8 <1>;
+
+ buck1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <3587500>;
+ regulator-min-microamp = <460000>;
+ regulator-max-microamp = <7600000>;
+ regulator-boot-on;
+ mps,buck-ovp-disable;
+ mps,buck-phase-delay = /bits/ 8 <2>;
+ mps,buck-softstart = /bits/ 8 <1>;
+ };
+
+ ldo2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <3587500>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
new file mode 100644
index 000000000000..71ce032b8cf8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd71828-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71828 Power Management Integrated Circuit regulators
+
+maintainers:
+ - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+ This module is part of the ROHM BD71828 MFD device. For more details
+ see Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml.
+
+ The regulator controller is represented as a sub-node of the PMIC node
+ on the device tree.
+
+ Regulator nodes should be named to BUCK_<number> and LDO_<number>.
+ The valid names for BD71828 regulator nodes are
+ BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, BUCK7
+ LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7
+
+patternProperties:
+ "^LDO[1-7]$":
+ type: object
+ allOf:
+ - $ref: regulator.yaml#
+ description:
+ Properties for single LDO regulator.
+
+ properties:
+ regulator-name:
+ pattern: "^ldo[1-7]$"
+ description:
+ should be "ldo1", ..., "ldo7"
+
+ "^BUCK[1-7]$":
+ type: object
+ allOf:
+ - $ref: regulator.yaml#
+ description:
+ Properties for single BUCK regulator.
+
+ properties:
+ regulator-name:
+ pattern: "^buck[1-7]$"
+ description:
+ should be "buck1", ..., "buck7"
+
+ rohm,dvs-run-voltage:
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ maximum: 3300000
+ description:
+ PMIC default "RUN" state voltage in uV. See below table for
+ bucks which support this. 0 means disabled.
+
+ rohm,dvs-idle-voltage:
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ maximum: 3300000
+ description:
+ PMIC default "IDLE" state voltage in uV. See below table for
+ bucks which support this. 0 means disabled.
+
+ rohm,dvs-suspend-voltage:
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ maximum: 3300000
+ description:
+ PMIC default "SUSPEND" state voltage in uV. See below table for
+ bucks which support this. 0 means disabled.
+
+ rohm,dvs-lpsr-voltage:
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ maximum: 3300000
+ description:
+ PMIC default "LPSR" state voltage in uV. See below table for
+ bucks which support this. 0 means disabled.
+
+ # Supported default DVS states:
+ # buck | run | idle | suspend | lpsr
+ #--------------------------------------------------------------
+ # 1, 2, 6, and 7 | supported | supported | supported (*)
+ #--------------------------------------------------------------
+ # 3, 4, and 5 | supported (**)
+ #--------------------------------------------------------------
+ #
+ #(*) LPSR and SUSPEND states use same voltage but both states have own
+ # enable /
+ # disable settings. Voltage 0 can be specified for a state to make
+ # regulator disabled on that state.
+ #
+ #(**) All states use same voltage but have own enable / disable
+ # settings. Voltage 0 can be specified for a state to make
+ # regulator disabled on that state.
+
+ required:
+ - regulator-name
+ additionalProperties: false
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.txt b/Documentation/devicetree/bindings/regulator/st,stm32-booster.txt
deleted file mode 100644
index 479ad4c8758e..000000000000
--- a/Documentation/devicetree/bindings/regulator/st,stm32-booster.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-STM32 BOOSTER - Booster for ADC analog input switches
-
-Some STM32 devices embed a 3.3V booster supplied by Vdda, that can be used
-to supply ADC analog input switches.
-
-Required properties:
-- compatible: Should be one of:
- "st,stm32h7-booster"
- "st,stm32mp1-booster"
-- st,syscfg: Phandle to system configuration controller.
-- vdda-supply: Phandle to the vdda input analog voltage.
-
-Example:
- booster: regulator-booster {
- compatible = "st,stm32mp1-booster";
- st,syscfg = <&syscfg>;
- vdda-supply = <&vdda>;
- };
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
new file mode 100644
index 000000000000..64f1183ce841
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/st,stm32-booster.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 booster for ADC analog input switches bindings
+
+maintainers:
+ - Fabrice Gasnier <fabrice.gasnier@st.com>
+
+description: |
+ Some STM32 devices embed a 3.3V booster supplied by Vdda, that can be used
+ to supply ADC analog input switches.
+
+allOf:
+ - $ref: "regulator.yaml#"
+
+properties:
+ compatible:
+ enum:
+ - st,stm32h7-booster
+ - st,stm32mp1-booster
+
+ st,syscfg:
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ description: phandle to system configuration controller.
+
+ vdda-supply:
+ description: phandle to the vdda input analog voltage.
+
+required:
+ - compatible
+ - st,syscfg
+ - vdda-supply
+
+examples:
+ - |
+ regulator-booster {
+ compatible = "st,stm32mp1-booster";
+ st,syscfg = <&syscfg>;
+ vdda-supply = <&vdda>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt
deleted file mode 100644
index 5ddb8500a929..000000000000
--- a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-STM32 VREFBUF - Voltage reference buffer
-
-Some STM32 devices embed a voltage reference buffer which can be used as
-voltage reference for ADCs, DACs and also as voltage reference for external
-components through the dedicated VREF+ pin.
-
-Required properties:
-- compatible: Must be "st,stm32-vrefbuf".
-- reg: Offset and length of VREFBUF register set.
-- clocks: Must contain an entry for peripheral clock.
-
-Example:
- vrefbuf: regulator@58003c00 {
- compatible = "st,stm32-vrefbuf";
- reg = <0x58003C00 0x8>;
- clocks = <&rcc VREF_CK>;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <2500000>;
- vdda-supply = <&vdda>;
- };
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
new file mode 100644
index 000000000000..33cdaeb25aee
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/st,stm32-vrefbuf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Voltage reference buffer bindings
+
+description: |
+ Some STM32 devices embed a voltage reference buffer which can be used as
+ voltage reference for ADCs, DACs and also as voltage reference for external
+ components through the dedicated VREF+ pin.
+
+maintainers:
+ - Fabrice Gasnier <fabrice.gasnier@st.com>
+
+allOf:
+ - $ref: "regulator.yaml#"
+
+properties:
+ compatible:
+ const: st,stm32-vrefbuf
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ vdda-supply:
+ description: phandle to the vdda input analog voltage.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - vdda-supply
+
+examples:
+ - |
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ vrefbuf@50025000 {
+ compatible = "st,stm32-vrefbuf";
+ reg = <0x50025000 0x8>;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2500000>;
+ clocks = <&rcc VREF>;
+ vdda-supply = <&vdda>;
+ };
+
+...
+
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt
deleted file mode 100644
index e372dd3f0c8a..000000000000
--- a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-STM32MP1 PWR Regulators
------------------------
-
-Available Regulators in STM32MP1 PWR block are:
- - reg11 for regulator 1V1
- - reg18 for regulator 1V8
- - usb33 for the swtich USB3V3
-
-Required properties:
-- compatible: Must be "st,stm32mp1,pwr-reg"
-- list of child nodes that specify the regulator reg11, reg18 or usb33
- initialization data for defined regulators. The definition for each of
- these nodes is defined using the standard binding for regulators found at
- Documentation/devicetree/bindings/regulator/regulator.txt.
-- vdd-supply: phandle to the parent supply/regulator node for vdd input
-- vdd_3v3_usbfs-supply: phandle to the parent supply/regulator node for usb33
-
-Example:
-
-pwr_regulators: pwr@50001000 {
- compatible = "st,stm32mp1,pwr-reg";
- reg = <0x50001000 0x10>;
- vdd-supply = <&vdd>;
- vdd_3v3_usbfs-supply = <&vdd_usb>;
-
- reg11: reg11 {
- regulator-name = "reg11";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- };
-
- reg18: reg18 {
- regulator-name = "reg18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- usb33: usb33 {
- regulator-name = "usb33";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-};
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
new file mode 100644
index 000000000000..8d8f38fe85dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/st,stm32mp1-pwr-reg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32MP1 PWR voltage regulators
+
+maintainers:
+ - Pascal Paillet <p.paillet@st.com>
+
+properties:
+ compatible:
+ const: st,stm32mp1,pwr-reg
+
+ reg:
+ maxItems: 1
+
+ vdd-supply:
+ description: Input supply phandle(s) for vdd input
+
+ vdd_3v3_usbfs-supply:
+ description: Input supply phandle(s) for vdd_3v3_usbfs input
+
+patternProperties:
+ "^(reg11|reg18|usb33)$":
+ type: object
+
+ allOf:
+ - $ref: "regulator.yaml#"
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ pwr@50001000 {
+ compatible = "st,stm32mp1,pwr-reg";
+ reg = <0x50001000 0x10>;
+ vdd-supply = <&vdd>;
+ vdd_3v3_usbfs-supply = <&vdd_usb>;
+
+ reg11 {
+ regulator-name = "reg11";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ reg18 {
+ regulator-name = "reg18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ usb33 {
+ regulator-name = "usb33";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+...