summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-01-16 05:21:28 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2016-01-16 05:21:28 +0300
commitece6267878aed4eadff766112f1079984315d8c8 (patch)
treed8d225e7d9d7fe2fda283791c7501ff38f21d564 /Documentation
parentd45187aaf0e256d23da2f7694a7826524499aa31 (diff)
parent3da834e3e5a4a5d26882955298b55a9ed37a00bc (diff)
downloadlinux-ece6267878aed4eadff766112f1079984315d8c8.tar.xz
Merge tag 'clk-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk framework updates from Michael Turquette: "The clk framework and driver changes for 4.5 look pretty typical. The bulk of the changes are to clk controller drivers, though some improvements to the core and some re-usable blocks/templates also received some love. In this past cycle the clk maintainers developed a good workflow for handling the common case of patch submissions containing a new drivers, new shared Device Tree header and a new Device Tree binding description. This requires coordination with the Device Tree maintainers and with the architecture maintainers (typically the arm-soc tree in our case). This explains the increase in changes to include/dt-bindings/... and to Documentation/devicetree/bindings/clock/... coming from the clk tree. The same commits can be expected to come through those trees on occasion, through the use of shared, immutable branches" * tag 'clk-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits) clk: remove duplicated COMMON_CLK_NXP record from clk/Kconfig clk: fix clk-gpio.c with optional clock= DT property clk: rockchip: fix section mismatches with new child-clocks clk: gpio: handle error codes for of_clk_get_parent_count() clk: gpio: fix memory leak clk: shmobile: r8a7795: Add SATA0 clock clk: bcm2835: Add PWM clock support clk: bcm2835: Support for clock parent selection clk: bcm2835: add a round up ability to the clock divisor clk: lpc32xx: add common clock framework driver clk: lpc18xx: add NXP specific COMMON_CLK_NXP configuration symbol dt-bindings: clock: add NXP LPC32xx clock list for consumers dt-bindings: clock: add description of LPC32xx USB clock controller dt-bindings: clock: add description of LPC32xx clock controller clk: rockchip: rk3036: include downstream muxes into fractional dividers clk: add flag for clocks that need to be enabled on rate changes clk: rockchip: Allow the RK3288 SPDIF clocks to change their parent clk: rockchip: include downstream muxes into fractional dividers clk: rockchip: handle mux dependency of fractional dividers clk: bcm2835: Add a driver for the auxiliary peripheral clock gates. ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt31
-rw-r--r--Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt5
-rw-r--r--Documentation/devicetree/bindings/clock/cs2000-cp.txt22
-rw-r--r--Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt56
-rw-r--r--Documentation/devicetree/bindings/clock/nxp,lpc3220-clk.txt30
-rw-r--r--Documentation/devicetree/bindings/clock/nxp,lpc3220-usb-clk.txt22
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,gcc.txt1
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,mmcc.txt1
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt4
-rw-r--r--Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt56
-rw-r--r--Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt58
-rw-r--r--Documentation/devicetree/bindings/clock/sunxi.txt10
-rw-r--r--Documentation/devicetree/bindings/clock/tango4-clock.txt23
13 files changed, 319 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt
new file mode 100644
index 000000000000..7a837d2182ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt
@@ -0,0 +1,31 @@
+Broadcom BCM2835 auxiliary peripheral support
+
+This binding uses the common clock binding:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The auxiliary peripherals (UART, SPI1, and SPI2) have a small register
+area controlling clock gating to the peripherals, and providing an IRQ
+status register.
+
+Required properties:
+- compatible: Should be "brcm,bcm2835-aux"
+- #clock-cells: Should be <1>. The permitted clock-specifier values can be
+ found in include/dt-bindings/clock/bcm2835-aux.h
+- reg: Specifies base physical address and size of the registers
+- clocks: The parent clock phandle
+
+Example:
+
+ clocks: cprman@7e101000 {
+ compatible = "brcm,bcm2835-cprman";
+ #clock-cells = <1>;
+ reg = <0x7e101000 0x2000>;
+ clocks = <&clk_osc>;
+ };
+
+ aux: aux@0x7e215004 {
+ compatible = "brcm,bcm2835-aux";
+ #clock-cells = <1>;
+ reg = <0x7e215000 0x8>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
index ede65a55e21b..0b35e71b39e8 100644
--- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
@@ -208,3 +208,8 @@ These clock IDs are defined in:
ch3_unused lcpll_ports 4 BCM_NS2_LCPLL_PORTS_CH3_UNUSED
ch4_unused lcpll_ports 5 BCM_NS2_LCPLL_PORTS_CH4_UNUSED
ch5_unused lcpll_ports 6 BCM_NS2_LCPLL_PORTS_CH5_UNUSED
+
+BCM63138
+--------
+PLL and leaf clock compatible strings for BCM63138 are:
+ "brcm,bcm63138-armpll"
diff --git a/Documentation/devicetree/bindings/clock/cs2000-cp.txt b/Documentation/devicetree/bindings/clock/cs2000-cp.txt
new file mode 100644
index 000000000000..54e6df0bee8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/cs2000-cp.txt
@@ -0,0 +1,22 @@
+CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier
+
+Required properties:
+
+- compatible: "cirrus,cs2000-cp"
+- reg: The chip select number on the I2C bus
+- clocks: common clock binding for CLK_IN, XTI/REF_CLK
+- clock-names: CLK_IN : clk_in, XTI/REF_CLK : ref_clk
+- #clock-cells: must be <0>
+
+Example:
+
+&i2c2 {
+ ...
+ cs2000: clk_multiplier@4f {
+ #clock-cells = <0>;
+ compatible = "cirrus,cs2000-cp";
+ reg = <0x4f>;
+ clocks = <&rcar_sound 0>, <&x12_clk>;
+ clock-names = "clk_in", "ref_clk";
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt
new file mode 100644
index 000000000000..26f237f641b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt
@@ -0,0 +1,56 @@
+NVIDIA Tegra210 Clock And Reset Controller
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
+for muxing and gating Tegra's clocks, and setting their rates.
+
+Required properties :
+- compatible : Should be "nvidia,tegra210-car"
+- reg : Should contain CAR registers location and length
+- clocks : Should contain phandle and clock specifiers for two clocks:
+ the 32 KHz "32k_in".
+- #clock-cells : Should be 1.
+ In clock consumers, this cell represents the clock ID exposed by the
+ CAR. The assignments may be found in header file
+ <dt-bindings/clock/tegra210-car.h>.
+- #reset-cells : Should be 1.
+ In clock consumers, this cell represents the bit number in the CAR's
+ array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
+
+Example SoC include file:
+
+/ {
+ tegra_car: clock {
+ compatible = "nvidia,tegra210-car";
+ reg = <0x60006000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ usb@c5004000 {
+ clocks = <&tegra_car TEGRA210_CLK_USB2>;
+ };
+};
+
+Example board file:
+
+/ {
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk_32k: clock@1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ &tegra_car {
+ clocks = <&clk_32k>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/nxp,lpc3220-clk.txt b/Documentation/devicetree/bindings/clock/nxp,lpc3220-clk.txt
new file mode 100644
index 000000000000..20cbca3f41d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nxp,lpc3220-clk.txt
@@ -0,0 +1,30 @@
+NXP LPC32xx Clock Controller
+
+Required properties:
+- compatible: should be "nxp,lpc3220-clk"
+- reg: should contain clock controller registers location and length
+- #clock-cells: must be 1, the cell holds id of a clock provided by the
+ clock controller
+- clocks: phandles of external oscillators, the list must contain one
+ 32768 Hz oscillator and may have one optional high frequency oscillator
+- clock-names: list of external oscillator clock names, must contain
+ "xtal_32k" and may have optional "xtal"
+
+Examples:
+
+ /* System Control Block */
+ scb {
+ compatible = "simple-bus";
+ ranges = <0x0 0x040004000 0x00001000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ clk: clock-controller@0 {
+ compatible = "nxp,lpc3220-clk";
+ reg = <0x00 0x114>;
+ #clock-cells = <1>;
+
+ clocks = <&xtal_32k>, <&xtal>;
+ clock-names = "xtal_32k", "xtal";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/clock/nxp,lpc3220-usb-clk.txt b/Documentation/devicetree/bindings/clock/nxp,lpc3220-usb-clk.txt
new file mode 100644
index 000000000000..0aa249409b51
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nxp,lpc3220-usb-clk.txt
@@ -0,0 +1,22 @@
+NXP LPC32xx USB Clock Controller
+
+Required properties:
+- compatible: should be "nxp,lpc3220-usb-clk"
+- reg: should contain clock controller registers location and length
+- #clock-cells: must be 1, the cell holds id of a clock provided by the
+ USB clock controller
+
+Examples:
+
+ usb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x0 0x31020000 0x00001000>;
+
+ usbclk: clock-controller@f00 {
+ compatible = "nxp,lpc3220-usb-clk";
+ reg = <0xf00 0x100>;
+ #clock-cells = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
index 152dfaab2575..72f82f444091 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
@@ -13,6 +13,7 @@ Required properties :
"qcom,gcc-msm8974"
"qcom,gcc-msm8974pro"
"qcom,gcc-msm8974pro-ac"
+ "qcom,gcc-msm8996"
- reg : shall contain base register location and length
- #clock-cells : shall contain 1
diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.txt b/Documentation/devicetree/bindings/clock/qcom,mmcc.txt
index 34e7614d5074..8b0f7841af8d 100644
--- a/Documentation/devicetree/bindings/clock/qcom,mmcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.txt
@@ -9,6 +9,7 @@ Required properties :
"qcom,mmcc-msm8660"
"qcom,mmcc-msm8960"
"qcom,mmcc-msm8974"
+ "qcom,mmcc-msm8996"
- reg : shall contain base register location and length
- #clock-cells : shall contain 1
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt
index 38dcf0370143..ae36ab842919 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt
@@ -20,6 +20,10 @@ Required Properties:
clocks must be specified. For clocks with multiple parents, invalid
settings must be specified as "<0>".
- #clock-cells: Must be 0
+
+
+Optional Properties:
+
- clock-output-names: The name of the clock as a free-form string
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
new file mode 100644
index 000000000000..ace05992a262
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
@@ -0,0 +1,56 @@
+* Rockchip RK3036 Clock and Reset Unit
+
+The RK3036 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3036-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_gmac" - external GMAC clock - optional
+
+Example: Clock controller node:
+
+ cru: cru@20000000 {
+ compatible = "rockchip,rk3036-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@20060000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x20060000 0x100>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&cru SCLK_UART0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt
new file mode 100644
index 000000000000..f323048127eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt
@@ -0,0 +1,58 @@
+* Rockchip RK3228 Clock and Reset Unit
+
+The RK3228 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3228-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3228-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_gmac" - external GMAC clock - optional
+ - "ext_hsadc" - external HSADC clock - optional
+ - "phy_50m_out" - output clock of the pll in the mac phy
+
+Example: Clock controller node:
+
+ cru: cru@20000000 {
+ compatible = "rockchip,rk3228-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@10110000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10110000 0x100>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&cru SCLK_UART0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index 8a47b77abfca..e59f57b24777 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -27,7 +27,9 @@ Required properties:
"allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
"allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20
"allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31
+ "allwinner,sun9i-a80-cpus-clk" - for the CPUS on A80
"allwinner,sun6i-a31-ahb1-clk" - for the AHB1 clock on A31
+ "allwinner,sun8i-h3-ahb2-clk" - for the AHB2 clock on H3
"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
"allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23
"allwinner,sun9i-a80-ahb0-gates-clk" - for the AHB0 gates on A80
@@ -55,6 +57,9 @@ Required properties:
"allwinner,sun9i-a80-apb1-gates-clk" - for the APB1 gates on A80
"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
"allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
+ "allwinner,sun8i-h3-bus-gates-clk" - for the bus gates on H3
+ "allwinner,sun9i-a80-apbs-gates-clk" - for the APBS gates on A80
+ "allwinner,sun4i-a10-dram-gates-clk" - for the DRAM gates on A10
"allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13
"allwinner,sun4i-a10-mmc-clk" - for the MMC clock
"allwinner,sun9i-a80-mmc-clk" - for mmc module clocks on A80
@@ -68,8 +73,10 @@ Required properties:
"allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
"allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31
"allwinner,sun8i-a23-usb-clk" - for usb gates + resets on A23
+ "allwinner,sun8i-h3-usb-clk" - for usb gates + resets on H3
"allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80
"allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80
+ "allwinner,sun4i-a10-ve-clk" - for the Video Engine clock
Required properties for all clocks:
- reg : shall be the control register address for the clock.
@@ -89,6 +96,9 @@ Required properties for all clocks:
And "allwinner,*-usb-clk" clocks also require:
- reset-cells : shall be set to 1
+The "allwinner,sun4i-a10-ve-clk" clock also requires:
+- reset-cells : shall be set to 0
+
The "allwinner,sun9i-a80-mmc-config-clk" clock also requires:
- #reset-cells : shall be set to 1
- resets : shall be the reset control phandle for the mmc block.
diff --git a/Documentation/devicetree/bindings/clock/tango4-clock.txt b/Documentation/devicetree/bindings/clock/tango4-clock.txt
new file mode 100644
index 000000000000..19c580a7bda2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/tango4-clock.txt
@@ -0,0 +1,23 @@
+* Sigma Designs Tango4 Clock Generator
+
+The Tango4 clock generator outputs cpu_clk and sys_clk (the latter is used
+for RAM and various peripheral devices). The clock binding described here
+is applicable to all Tango4 SoCs.
+
+Required Properties:
+
+- compatible: should be "sigma,tango4-clkgen".
+- reg: physical base address of the device and length of memory mapped region.
+- clocks: phandle of the input clock (crystal oscillator).
+- clock-output-names: should be "cpuclk" and "sysclk".
+- #clock-cells: should be set to 1.
+
+Example:
+
+ clkgen: clkgen@10000 {
+ compatible = "sigma,tango4-clkgen";
+ reg = <0x10000 0x40>;
+ clocks = <&xtal>;
+ clock-output-names = "cpuclk", "sysclk";
+ #clock-cells = <1>;
+ };