summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-08-18 21:00:00 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2018-08-18 21:00:00 +0300
commit2475c515d4031c494ff452508a8bf8c281ec6e56 (patch)
tree0303935bbd919ec522bf0fe02066f09b391d2b57 /Documentation
parent336722eb9d9732c5a497fb6299bf38cde413592b (diff)
parente4f6a44c4aeca9eda153302abb0c14d053914f72 (diff)
downloadlinux-2475c515d4031c494ff452508a8bf8c281ec6e56.tar.xz
Merge tag 'staging-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO updates from Greg KH: "Here are the big staging/iio patches for 4.19-rc1. Lots of churn here, with tons of cleanups happening in staging drivers, a removal of an old crypto driver that no one was using (skein), and the addition of some new IIO drivers. Also added was a "gasket" driver from Google that needs loads of work and the erofs filesystem. Even with adding all of the new drivers and a new filesystem, we are only adding about 1000 lines overall to the kernel linecount, which shows just how much cleanup happened, and how big the unused crypto driver was. All of these have been in the linux-next tree for a while now with no reported issues" * tag 'staging-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (903 commits) staging:rtl8192u: Remove unused macro definitions - Style staging:rtl8192u: Add spaces around '+' operator - Style staging:rtl8192u: Remove stale comment - Style staging: rtl8188eu: remove unused mp_custom_oid.h staging: fbtft: Add spaces around / - Style staging: fbtft: Erases some repetitive usage of function name - Style staging: fbtft: Adjust some empty-line problems - Style staging: fbtft: Removes one nesting level to help readability - Style staging: fbtft: Changes gamma table to define. staging: fbtft: A bit more information on dev_err. staging: fbtft: Fixes some alignment issues - Style staging: fbtft: Puts macro arguments in parenthesis to avoid precedence issues - Style staging: rtl8188eu: remove unused array dB_Invert_Table staging: rtl8188eu: remove whitespace, add missing blank line staging: rtl8188eu: use is_multicast_ether_addr in rtw_sta_mgt.c staging: rtl8188eu: remove whitespace - style staging: rtl8188eu: cleanup block comment - style staging: rtl8188eu: use is_multicast_ether_addr in rtl8188eu_xmit.c staging: rtl8188eu: use is_multicast_ether_addr in recv_linux.c staging: rtlwifi: refactor rtl_get_tcb_desc ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio26
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-isl2950147
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-light-si113322
-rw-r--r--Documentation/devicetree/bindings/iio/accel/adxl345.txt7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt1
-rw-r--r--Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt9
-rw-r--r--Documentation/devicetree/bindings/iio/adc/avia-hx711.txt8
-rw-r--r--Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt2
-rw-r--r--Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt36
-rw-r--r--Documentation/devicetree/bindings/iio/dac/ad5758.txt78
-rw-r--r--Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt1
-rw-r--r--Documentation/devicetree/bindings/iio/light/isl29501.txt13
-rw-r--r--Documentation/devicetree/bindings/iio/pressure/bmp085.txt7
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt30
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt3
15 files changed, 277 insertions, 13 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 731146c3b138..a5b4f223641d 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -197,6 +197,18 @@ Description:
Angle of rotation. Units after application of scale and offset
are radians.
+What: /sys/bus/iio/devices/iio:deviceX/in_positionrelative_x_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_positionrelative_y_raw
+KernelVersion: 4.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Relative position in direction x or y on a pad (may be
+ arbitrarily assigned but should match other such assignments on
+ device).
+ Units after application of scale and offset are milli percents
+ from the pad's size in both directions. Should be calibrated by
+ the consumer.
+
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw
@@ -1295,13 +1307,16 @@ What: /sys/.../iio:deviceX/in_intensityY_raw
What: /sys/.../iio:deviceX/in_intensityY_ir_raw
What: /sys/.../iio:deviceX/in_intensityY_both_raw
What: /sys/.../iio:deviceX/in_intensityY_uv_raw
+What: /sys/.../iio:deviceX/in_intensityY_duv_raw
KernelVersion: 3.4
Contact: linux-iio@vger.kernel.org
Description:
Unit-less light intensity. Modifiers both and ir indicate
that measurements contain visible and infrared light
- components or just infrared light, respectively. Modifier uv indicates
- that measurements contain ultraviolet light components.
+ components or just infrared light, respectively. Modifier
+ uv indicates that measurements contain ultraviolet light
+ components. Modifier duv indicates that measurements
+ contain deep ultraviolet light components.
What: /sys/.../iio:deviceX/in_uvindex_input
KernelVersion: 4.6
@@ -1663,3 +1678,10 @@ KernelVersion: 4.12
Contact: linux-iio@vger.kernel.org
Description:
Raw counter device counters direction for channel Y.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_phaseY_raw
+KernelVersion: 4.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Raw (unscaled) phase difference reading from channel Y
+ that can be processed to radians. \ No newline at end of file
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-isl29501 b/Documentation/ABI/testing/sysfs-bus-iio-isl29501
new file mode 100644
index 000000000000..d009cfbbd72b
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-isl29501
@@ -0,0 +1,47 @@
+What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_agc_gain
+What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_agc_gain_bias
+KernelVersion: 4.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ This sensor has an automatic gain control (agc) loop
+ which sets the analog signal levels at an optimum
+ level by controlling programmable gain amplifiers. The
+ criteria for optimal gain is determined by the sensor.
+
+ Return the actual gain value as an integer in [0; 65536]
+ range when read from.
+
+ The agc gain read when measuring crosstalk shall be
+ written into in_proximity0_agc_gain_bias.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calib_phase_temp_a
+What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calib_phase_temp_b
+What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calib_phase_light_a
+What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calib_phase_light_b
+KernelVersion: 4.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ The sensor is able to perform correction of distance
+ measurements due to changing temperature and ambient
+ light conditions. It can be programmed to correct for
+ a second order error polynomial.
+
+ Phase data has to be collected when temperature and
+ ambient light are modulated independently.
+
+ Then a least squares curve fit to a second order
+ polynomial has to be generated from the data. The
+ resultant curves have the form ax^2 + bx + c.
+
+ From those two curves, a and b coefficients shall be
+ stored in in_proximity0_calib_phase_temp_a and
+ in_proximity0_calib_phase_temp_b for temperature and
+ in in_proximity0_calib_phase_light_a and
+ in_proximity0_calib_phase_light_b for ambient light.
+
+ Those values must be integer in [0; 8355840] range.
+
+ Finally, the c constant is set by the sensor
+ internally.
+
+ The value stored in sensor is displayed when read from.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-light-si1133 b/Documentation/ABI/testing/sysfs-bus-iio-light-si1133
new file mode 100644
index 000000000000..6f130cdb26a6
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-light-si1133
@@ -0,0 +1,22 @@
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_ir_small_raw
+KernelVersion: 4.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Unit-less infrared intensity. The intensity is measured from 1
+ dark photodiode. "small" indicate the surface area capturing
+ infrared.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_ir_large_raw
+KernelVersion: 4.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Unit-less infrared intensity. The intensity is measured from 4
+ dark photodiodes. "large" indicate the surface area capturing
+ infrared.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_large_raw
+KernelVersion: 4.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Unit-less light intensity with more diodes.
+
diff --git a/Documentation/devicetree/bindings/iio/accel/adxl345.txt b/Documentation/devicetree/bindings/iio/accel/adxl345.txt
index ae09a046bc72..f9525f6e3d43 100644
--- a/Documentation/devicetree/bindings/iio/accel/adxl345.txt
+++ b/Documentation/devicetree/bindings/iio/accel/adxl345.txt
@@ -1,9 +1,12 @@
-Analog Devices ADXL345 3-Axis, +/-(2g/4g/8g/16g) Digital Accelerometer
+Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers
http://www.analog.com/en/products/mems/accelerometers/adxl345.html
+http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
Required properties:
- - compatible : should be "adi,adxl345"
+ - compatible : should be one of
+ "adi,adxl345"
+ "adi,adxl375"
- reg : the I2C address or SPI chip select number of the sensor
Required properties for SPI bus usage:
diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
index d1acd5ea2737..54b823f3a453 100644
--- a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
@@ -4,6 +4,7 @@ Required properties:
- compatible: depending on the SoC this should be one of:
- "amlogic,meson8-saradc" for Meson8
- "amlogic,meson8b-saradc" for Meson8b
+ - "amlogic,meson8m2-saradc" for Meson8m2
- "amlogic,meson-gxbb-saradc" for GXBB
- "amlogic,meson-gxl-saradc" for GXL
- "amlogic,meson-gxm-saradc" for GXM
diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
index 6469a4cd2a6d..4a3c1d496e1a 100644
--- a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
@@ -21,6 +21,14 @@ Optional properties:
- dmas: Phandle to dma channel for the ADC.
- dma-names: Must be "rx" when dmas property is being used.
See ../../dma/dma.txt for details.
+ - #io-channel-cells: in case consumer drivers are attached, this must be 1.
+ See <Documentation/devicetree/bindings/iio/iio-bindings.txt> for details.
+
+Properties for consumer drivers:
+ - Consumer drivers can be connected to this producer device, as specified
+ in <Documentation/devicetree/bindings/iio/iio-bindings.txt>
+ - Channels exposed are specified in:
+ <dt-bindings/iio/adc/at91-sama5d2_adc.txt>
Example:
@@ -38,4 +46,5 @@ adc: adc@fc030000 {
atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>;
dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
dma-names = "rx";
+ #io-channel-cells = <1>;
}
diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt b/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt
index b3629405f568..7222328a3d0d 100644
--- a/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt
+++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt
@@ -8,11 +8,17 @@ Required properties:
See Documentation/devicetree/bindings/gpio/gpio.txt
- avdd-supply: Definition of the regulator used as analog supply
+Optional properties:
+ - clock-frequency: Frequency of PD_SCK in Hz
+ Minimum value allowed is 10 kHz because of maximum
+ high time of 50 microseconds.
+
Example:
-weight@0 {
+weight {
compatible = "avia,hx711";
sck-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
dout-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
avdd-suppy = <&avdd>;
+ clock-frequency = <100000>;
};
diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
index ba24ca7ba95e..59b92cd32552 100644
--- a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
+++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
@@ -7,7 +7,7 @@ Required properties:
Example node:
- ads1202: adc@0 {
+ ads1202: adc {
compatible = "sd-modulator";
#io-channel-cells = <0>;
};
diff --git a/Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt b/Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt
new file mode 100644
index 000000000000..8aad960de50b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-adc.txt
@@ -0,0 +1,36 @@
+Spreadtrum SC27XX series PMICs ADC binding
+
+Required properties:
+- compatible: Should be one of the following.
+ "sprd,sc2720-adc"
+ "sprd,sc2721-adc"
+ "sprd,sc2723-adc"
+ "sprd,sc2730-adc"
+ "sprd,sc2731-adc"
+- reg: The address offset of ADC controller.
+- interrupt-parent: The interrupt controller.
+- interrupts: The interrupt number for the ADC device.
+- #io-channel-cells: Number of cells in an IIO specifier.
+- hwlocks: Reference to a phandle of a hwlock provider node.
+
+Example:
+
+ sc2731_pmic: pmic@0 {
+ compatible = "sprd,sc2731";
+ reg = <0>;
+ spi-max-frequency = <26000000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic_adc: adc@480 {
+ compatible = "sprd,sc2731-adc";
+ reg = <0x480>;
+ interrupt-parent = <&sc2731_pmic>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ #io-channel-cells = <1>;
+ hwlocks = <&hwlock 4>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/dac/ad5758.txt b/Documentation/devicetree/bindings/iio/dac/ad5758.txt
new file mode 100644
index 000000000000..bba01a5cab1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ad5758.txt
@@ -0,0 +1,78 @@
+Analog Devices AD5758 DAC device driver
+
+Required properties for the AD5758:
+ - compatible: Must be "adi,ad5758"
+ - reg: SPI chip select number for the device
+ - spi-max-frequency: Max SPI frequency to use (< 50000000)
+ - spi-cpha: is the only mode that is supported
+
+Required properties:
+
+ - adi,dc-dc-mode: Mode of operation of the dc-to-dc converter
+ Dynamic Power Control (DPC)
+ In this mode, the AD5758 circuitry senses the output
+ voltage and dynamically regulates the supply voltage,
+ VDPC+, to meet compliance requirements plus an optimized
+ headroom voltage for the output buffer.
+
+ Programmable Power Control (PPC)
+ In this mode, the VDPC+ voltage is user-programmable to
+ a fixed level that needs to accommodate the maximum output
+ load required.
+
+ The output of the DAC core is either converted to a
+ current or voltage output at the VIOUT pin. Only one mode
+ can be enabled at any one time.
+
+ The following values are currently supported:
+ * 1: DPC current mode
+ * 2: DPC voltage mode
+ * 3: PPC current mode
+
+ Depending on the selected output mode (voltage or current) one of the
+ two properties must
+ be present:
+
+ - adi,range-microvolt: Voltage output range
+ The array of voltage output ranges must contain two fields:
+ * <0 5000000>: 0 V to 5 V voltage range
+ * <0 10000000>: 0 V to 10 V voltage range
+ * <(-5000000) 5000000>: ±5 V voltage range
+ * <(-10000000) 10000000>: ±10 V voltage range
+ - adi,range-microamp: Current output range
+ The array of current output ranges must contain two fields:
+ * <0 20000>: 0 mA to 20 mA current range
+ * <0 24000>: 0 mA to 24 mA current range
+ * <4 24000>: 4 mA to 20 mA current range
+ * <(-20000) 20000>: ±20 mA current range
+ * <(-24000) 24000>: ±24 mA current range
+ * <(-1000) 22000>: −1 mA to +22 mA current range
+
+Optional properties:
+
+ - adi,dc-dc-ilim-microamp: The dc-to-dc converter current limit
+ The following values are currently supported [uA]:
+ * 150000
+ * 200000
+ * 250000
+ * 300000
+ * 350000
+ * 400000
+
+ - adi,slew-time-us: The time it takes for the output to reach the
+ full scale [uS]
+ The supported range is between 133us up to 1023984375us
+
+AD5758 Example:
+
+ dac@0 {
+ compatible = "adi,ad5758";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cpha;
+
+ adi,dc-dc-mode = <2>;
+ adi,range-microvolt = <0 10000000>;
+ adi,dc-dc-ilim-microamp = <200000>;
+ adi,slew-time-us = <125000>;
+ };
diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
index d33c19d68de3..b2f27da847b8 100644
--- a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
+++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
@@ -6,6 +6,7 @@ Required properties:
- compatible : should be one of
"invensense,mpu6050"
"invensense,mpu6500"
+ "invensense,mpu6515"
"invensense,mpu9150"
"invensense,mpu9250"
"invensense,mpu9255"
diff --git a/Documentation/devicetree/bindings/iio/light/isl29501.txt b/Documentation/devicetree/bindings/iio/light/isl29501.txt
new file mode 100644
index 000000000000..46957997fee3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/isl29501.txt
@@ -0,0 +1,13 @@
+* ISL29501 Time-of-flight sensor.
+
+Required properties:
+
+ - compatible : should be "renesas,isl29501"
+ - reg : the I2C address of the sensor
+
+Example:
+
+isl29501@57 {
+ compatible = "renesas,isl29501";
+ reg = <0x57>;
+};
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.txt b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt
index 5498b0688b6f..61c72e63c584 100644
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.txt
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt
@@ -8,10 +8,6 @@ Required properties:
"bosch,bme280"
Optional properties:
-- chip-id: configurable chip id for non-default chip revisions
-- temp-measurement-period: temperature measurement period (milliseconds)
-- default-oversampling: default oversampling value to be used at startup,
- value range is 0-3 with rising sensitivity.
- interrupts: interrupt mapping for IRQ
- reset-gpios: a GPIO line handling reset of the sensor: as the line is
active low, it should be marked GPIO_ACTIVE_LOW (see gpio/gpio.txt)
@@ -23,9 +19,6 @@ Example:
pressure@77 {
compatible = "bosch,bmp085";
reg = <0x77>;
- chip-id = <10>;
- temp-measurement-period = <100>;
- default-oversampling = <2>;
interrupt-parent = <&gpio0>;
interrupts = <25 IRQ_TYPE_EDGE_RISING>;
reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
new file mode 100644
index 000000000000..51456c0e9a27
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
@@ -0,0 +1,30 @@
+Generic resistive touchscreen ADC
+
+Required properties:
+
+ - compatible: must be "resistive-adc-touch"
+The device must be connected to an ADC device that provides channels for
+position measurement and optional pressure.
+Refer to ../iio/iio-bindings.txt for details
+ - iio-channels: must have at least two channels connected to an ADC device.
+These should correspond to the channels exposed by the ADC device and should
+have the right index as the ADC device registers them. These channels
+represent the relative position on the "x" and "y" axes.
+ - iio-channel-names: must have all the channels' names. Mandatory channels
+are "x" and "y".
+
+Optional properties:
+ - iio-channels: The third channel named "pressure" is optional and can be
+used if the ADC device also measures pressure besides position.
+If this channel is missing, pressure will be ignored and the touchscreen
+will only report position.
+ - iio-channel-names: optional channel named "pressure".
+
+Example:
+
+ resistive_touch: resistive_touch {
+ compatible = "resistive-adc-touch";
+ touchscreen-min-pressure = <50000>;
+ io-channels = <&adc 24>, <&adc 25>, <&adc 26>;
+ io-channel-names = "x", "y", "pressure";
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
index 537643e86f61..d092d5d033a0 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
@@ -7,6 +7,9 @@ Optional properties for Touchscreens:
(in pixels)
- touchscreen-max-pressure : maximum reported pressure (arbitrary range
dependent on the controller)
+ - touchscreen-min-pressure : minimum pressure on the touchscreen to be
+ achieved in order for the touchscreen
+ driver to report a touch event.
- touchscreen-fuzz-x : horizontal noise value of the absolute input
device (in pixels)
- touchscreen-fuzz-y : vertical noise value of the absolute input