summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-08-18 21:04:51 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2018-08-18 21:04:51 +0300
commitd5acba26bfa097a618be425522b1ec4269d3edaf (patch)
tree7abb08032d4b79b34eb1386aa007a811e1964839 /Documentation
parent2475c515d4031c494ff452508a8bf8c281ec6e56 (diff)
parent128f38041035001276e964cda1cf951f218d965d (diff)
downloadlinux-d5acba26bfa097a618be425522b1ec4269d3edaf.tar.xz
Merge tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/stable/sysfs-bus-vmbus7
-rw-r--r--Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc8
-rw-r--r--Documentation/ABI/testing/sysfs-class-fpga-manager24
-rw-r--r--Documentation/ABI/testing/sysfs-class-fpga-region9
-rw-r--r--Documentation/ABI/testing/sysfs-class-gnss15
-rw-r--r--Documentation/ABI/testing/sysfs-class-mei11
-rw-r--r--Documentation/ABI/testing/sysfs-platform-dfl-fme23
-rw-r--r--Documentation/ABI/testing/sysfs-platform-dfl-port16
-rw-r--r--Documentation/devicetree/bindings/arm/coresight.txt58
-rw-r--r--Documentation/devicetree/bindings/fsi/fsi-master-ast-cf.txt36
-rw-r--r--Documentation/devicetree/bindings/fsi/fsi.txt5
-rw-r--r--Documentation/devicetree/bindings/gnss/gnss.txt36
-rw-r--r--Documentation/devicetree/bindings/gnss/sirfstar.txt45
-rw-r--r--Documentation/devicetree/bindings/gnss/u-blox.txt44
-rw-r--r--Documentation/devicetree/bindings/mux/adi,adgs1408.txt48
-rw-r--r--Documentation/devicetree/bindings/nvmem/imx-ocotp.txt3
-rw-r--r--Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt52
-rw-r--r--Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt84
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt3
-rw-r--r--Documentation/driver-api/fpga/fpga-mgr.rst12
-rw-r--r--Documentation/driver-api/fpga/fpga-region.rst12
-rw-r--r--Documentation/driver-api/fpga/intro.rst14
-rw-r--r--Documentation/driver-api/slimbus.rst5
-rw-r--r--Documentation/fpga/dfl.txt285
-rw-r--r--Documentation/ioctl/ioctl-number.txt1
-rw-r--r--Documentation/sysctl/kernel.txt11
-rw-r--r--Documentation/w1/slaves/w1_ds24382
27 files changed, 847 insertions, 22 deletions
diff --git a/Documentation/ABI/stable/sysfs-bus-vmbus b/Documentation/ABI/stable/sysfs-bus-vmbus
index 3eaffbb2d468..3fed8fdb873d 100644
--- a/Documentation/ABI/stable/sysfs-bus-vmbus
+++ b/Documentation/ABI/stable/sysfs-bus-vmbus
@@ -42,6 +42,13 @@ Contact: K. Y. Srinivasan <kys@microsoft.com>
Description: The 16 bit vendor ID of the device
Users: tools/hv/lsvmbus and user level RDMA libraries
+What: /sys/bus/vmbus/devices/<UUID>/numa_node
+Date: Jul 2018
+KernelVersion: 4.19
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: This NUMA node to which the VMBUS device is
+ attached, or -1 if the node is unknown.
+
What: /sys/bus/vmbus/devices/<UUID>/channels/<N>
Date: September. 2017
KernelVersion: 4.14
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc
index 4fe677ed1305..ab49b9ac3bcb 100644
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc
@@ -83,3 +83,11 @@ KernelVersion: 4.7
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
Description: (R) Indicates the capabilities of the Coresight TMC.
The value is read directly from the DEVID register, 0xFC8,
+
+What: /sys/bus/coresight/devices/<memory_map>.tmc/buffer_size
+Date: December 2018
+KernelVersion: 4.19
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Size of the trace buffer for TMC-ETR when used in SYSFS
+ mode. Writable only for TMC-ETR configurations. The value
+ should be aligned to the kernel pagesize.
diff --git a/Documentation/ABI/testing/sysfs-class-fpga-manager b/Documentation/ABI/testing/sysfs-class-fpga-manager
index 23056c532fdd..5284fa33d4c5 100644
--- a/Documentation/ABI/testing/sysfs-class-fpga-manager
+++ b/Documentation/ABI/testing/sysfs-class-fpga-manager
@@ -35,3 +35,27 @@ Description: Read fpga manager state as a string.
* write complete = Doing post programming steps
* write complete error = Error while doing post programming
* operating = FPGA is programmed and operating
+
+What: /sys/class/fpga_manager/<fpga>/status
+Date: June 2018
+KernelVersion: 4.19
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read fpga manager status as a string.
+ If FPGA programming operation fails, it could be caused by crc
+ error or incompatible bitstream image. The intent of this
+ interface is to provide more detailed information for FPGA
+ programming errors to userspace. This is a list of strings for
+ the supported status.
+
+ * reconfig operation error - invalid operations detected by
+ reconfiguration hardware.
+ e.g. start reconfiguration
+ with errors not cleared
+ * reconfig CRC error - CRC error detected by
+ reconfiguration hardware.
+ * reconfig incompatible image - reconfiguration image is
+ incompatible with hardware
+ * reconfig IP protocol error - protocol errors detected by
+ reconfiguration hardware
+ * reconfig fifo overflow error - FIFO overflow detected by
+ reconfiguration hardware
diff --git a/Documentation/ABI/testing/sysfs-class-fpga-region b/Documentation/ABI/testing/sysfs-class-fpga-region
new file mode 100644
index 000000000000..bc7ec644acc9
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-fpga-region
@@ -0,0 +1,9 @@
+What: /sys/class/fpga_region/<region>/compat_id
+Date: June 2018
+KernelVersion: 4.19
+Contact: Wu Hao <hao.wu@intel.com>
+Description: FPGA region id for compatibility check, e.g. compatibility
+ of the FPGA reconfiguration hardware and image. This value
+ is defined or calculated by the layer that is creating the
+ FPGA region. This interface returns the compat_id value or
+ just error code -ENOENT in case compat_id is not used.
diff --git a/Documentation/ABI/testing/sysfs-class-gnss b/Documentation/ABI/testing/sysfs-class-gnss
new file mode 100644
index 000000000000..2467b6900eae
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-gnss
@@ -0,0 +1,15 @@
+What: /sys/class/gnss/gnssN/type
+Date: May 2018
+KernelVersion: 4.18
+Contact: Johan Hovold <johan@kernel.org>
+Description:
+ The GNSS receiver type. The currently identified types reflect
+ the protocol(s) supported by the receiver:
+
+ "NMEA" NMEA 0183
+ "SiRF" SiRF Binary
+ "UBX" UBX
+
+ Note that also non-"NMEA" type receivers typically support a
+ subset of NMEA 0183 with vendor extensions (e.g. to allow
+ switching to a vendor protocol).
diff --git a/Documentation/ABI/testing/sysfs-class-mei b/Documentation/ABI/testing/sysfs-class-mei
index 81ff6abf9673..17d7444a2397 100644
--- a/Documentation/ABI/testing/sysfs-class-mei
+++ b/Documentation/ABI/testing/sysfs-class-mei
@@ -54,3 +54,14 @@ Description: Configure tx queue limit
Set maximal number of pending writes
per opened session.
+
+What: /sys/class/mei/meiN/fw_ver
+Date: May 2018
+KernelVersion: 4.18
+Contact: Tomas Winkler <tomas.winkler@intel.com>
+Description: Display the ME firmware version.
+
+ The version of the platform ME firmware is in format:
+ <platform>:<major>.<minor>.<milestone>.<build_no>.
+ There can be up to three such blocks for different
+ FW components.
diff --git a/Documentation/ABI/testing/sysfs-platform-dfl-fme b/Documentation/ABI/testing/sysfs-platform-dfl-fme
new file mode 100644
index 000000000000..8fa4febfa4b2
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-dfl-fme
@@ -0,0 +1,23 @@
+What: /sys/bus/platform/devices/dfl-fme.0/ports_num
+Date: June 2018
+KernelVersion: 4.19
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-only. One DFL FPGA device may have more than 1
+ port/Accelerator Function Unit (AFU). It returns the
+ number of ports on the FPGA device when read it.
+
+What: /sys/bus/platform/devices/dfl-fme.0/bitstream_id
+Date: June 2018
+KernelVersion: 4.19
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-only. It returns Bitstream (static FPGA region)
+ identifier number, which includes the detailed version
+ and other information of this static FPGA region.
+
+What: /sys/bus/platform/devices/dfl-fme.0/bitstream_metadata
+Date: June 2018
+KernelVersion: 4.19
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-only. It returns Bitstream (static FPGA region) meta
+ data, which includes the synthesis date, seed and other
+ information of this static FPGA region.
diff --git a/Documentation/ABI/testing/sysfs-platform-dfl-port b/Documentation/ABI/testing/sysfs-platform-dfl-port
new file mode 100644
index 000000000000..6a92dda517b0
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-dfl-port
@@ -0,0 +1,16 @@
+What: /sys/bus/platform/devices/dfl-port.0/id
+Date: June 2018
+KernelVersion: 4.19
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-only. It returns id of this port. One DFL FPGA device
+ may have more than one port. Userspace could use this id to
+ distinguish different ports under same FPGA device.
+
+What: /sys/bus/platform/devices/dfl-port.0/afu_id
+Date: June 2018
+KernelVersion: 4.19
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-only. User can program different PR bitstreams to FPGA
+ Accelerator Function Unit (AFU) for different functions. It
+ returns uuid which could be used to identify which PR bitstream
+ is programmed in this AFU.
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
index 15ac8e8dcfdf..5d1ad09bafb4 100644
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@@ -39,6 +39,8 @@ its hardware characteristcs.
- System Trace Macrocell:
"arm,coresight-stm", "arm,primecell"; [1]
+ - Coresight Address Translation Unit (CATU)
+ "arm,coresight-catu", "arm,primecell";
* reg: physical base address and length of the register
set(s) of the component.
@@ -84,8 +86,15 @@ its hardware characteristcs.
* Optional property for TMC:
* arm,buffer-size: size of contiguous buffer space for TMC ETR
- (embedded trace router)
+ (embedded trace router). This property is obsolete. The buffer size
+ can be configured dynamically via buffer_size property in sysfs.
+ * arm,scatter-gather: boolean. Indicates that the TMC-ETR can safely
+ use the SG mode on this system.
+
+* Optional property for CATU :
+ * interrupts : Exactly one SPI may be listed for reporting the address
+ error
Example:
@@ -118,6 +127,35 @@ Example:
};
};
+ etr@20070000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0 0x20070000 0 0x1000>;
+
+ clocks = <&oscclk6a>;
+ clock-names = "apb_pclk";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* input port */
+ port@0 {
+ reg = <0>;
+ etr_in_port: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator2_out_port0>;
+ };
+ };
+
+ /* CATU link represented by output port */
+ port@1 {
+ reg = <1>;
+ etr_out_port: endpoint {
+ remote-endpoint = <&catu_in_port>;
+ };
+ };
+ };
+ };
+
2. Links
replicator {
/* non-configurable replicators don't show up on the
@@ -247,5 +285,23 @@ Example:
};
};
+5. CATU
+
+ catu@207e0000 {
+ compatible = "arm,coresight-catu", "arm,primecell";
+ reg = <0 0x207e0000 0 0x1000>;
+
+ clocks = <&oscclk6a>;
+ clock-names = "apb_pclk";
+
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ port {
+ catu_in_port: endpoint {
+ slave-mode;
+ remote-endpoint = <&etr_out_port>;
+ };
+ };
+ };
+
[1]. There is currently two version of STM: STM32 and STM500. Both
have the same HW interface and as such don't need an explicit binding name.
diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-ast-cf.txt b/Documentation/devicetree/bindings/fsi/fsi-master-ast-cf.txt
new file mode 100644
index 000000000000..3dc752db748b
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/fsi-master-ast-cf.txt
@@ -0,0 +1,36 @@
+Device-tree bindings for ColdFire offloaded gpio-based FSI master driver
+------------------------------------------------------------------------
+
+Required properties:
+ - compatible =
+ "aspeed,ast2400-cf-fsi-master" for an AST2400 based system
+ or
+ "aspeed,ast2500-cf-fsi-master" for an AST2500 based system
+
+ - clock-gpios = <gpio-descriptor>; : GPIO for FSI clock
+ - data-gpios = <gpio-descriptor>; : GPIO for FSI data signal
+ - enable-gpios = <gpio-descriptor>; : GPIO for enable signal
+ - trans-gpios = <gpio-descriptor>; : GPIO for voltage translator enable
+ - mux-gpios = <gpio-descriptor>; : GPIO for pin multiplexing with other
+ functions (eg, external FSI masters)
+ - memory-region = <phandle>; : Reference to the reserved memory for
+ the ColdFire. Must be 2M aligned on
+ AST2400 and 1M aligned on AST2500
+ - aspeed,sram = <phandle>; : Reference to the SRAM node.
+ - aspeed,cvic = <phandle>; : Reference to the CVIC node.
+
+Examples:
+
+ fsi-master {
+ compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+
+ clock-gpios = <&gpio 0>;
+ data-gpios = <&gpio 1>;
+ enable-gpios = <&gpio 2>;
+ trans-gpios = <&gpio 3>;
+ mux-gpios = <&gpio 4>;
+
+ memory-region = <&coldfire_memory>;
+ aspeed,sram = <&sram>;
+ aspeed,cvic = <&cvic>;
+ }
diff --git a/Documentation/devicetree/bindings/fsi/fsi.txt b/Documentation/devicetree/bindings/fsi/fsi.txt
index ab516c673a4b..afb4eccab131 100644
--- a/Documentation/devicetree/bindings/fsi/fsi.txt
+++ b/Documentation/devicetree/bindings/fsi/fsi.txt
@@ -83,6 +83,10 @@ addresses and sizes in the slave address space:
#address-cells = <1>;
#size-cells = <1>;
+Optionally, a slave can provide a global unique chip ID which is used to
+identify the physical location of the chip in a system specific way
+
+ chip-id = <0>;
FSI engines (devices)
---------------------
@@ -125,6 +129,7 @@ device tree if no extra platform information is required.
reg = <0 0>;
#address-cells = <1>;
#size-cells = <1>;
+ chip-id = <0>;
/* FSI engine at 0xc00, using a single page. In this example,
* it's an I2C master controller, so subnodes describe the
diff --git a/Documentation/devicetree/bindings/gnss/gnss.txt b/Documentation/devicetree/bindings/gnss/gnss.txt
new file mode 100644
index 000000000000..f1e4a2ff47c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/gnss.txt
@@ -0,0 +1,36 @@
+GNSS Receiver DT binding
+
+This documents the binding structure and common properties for GNSS receiver
+devices.
+
+A GNSS receiver node is a node named "gnss" and typically resides on a serial
+bus (e.g. UART, I2C or SPI).
+
+Please refer to the following documents for generic properties:
+
+ Documentation/devicetree/bindings/serial/slave-device.txt
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Required properties:
+
+- compatible : A string reflecting the vendor and specific device the node
+ represents
+
+Optional properties:
+- enable-gpios : GPIO used to enable the device
+- timepulse-gpios : Time pulse GPIO
+
+Example:
+
+serial@1234 {
+ compatible = "ns16550a";
+
+ gnss {
+ compatible = "u-blox,neo-8";
+
+ vcc-supply = <&gnss_reg>;
+ timepulse-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+
+ current-speed = <4800>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/gnss/sirfstar.txt b/Documentation/devicetree/bindings/gnss/sirfstar.txt
new file mode 100644
index 000000000000..648d183cdb77
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/sirfstar.txt
@@ -0,0 +1,45 @@
+SiRFstar-based GNSS Receiver DT binding
+
+SiRFstar chipsets are used in GNSS-receiver modules produced by several
+vendors and can use UART, SPI or I2C interfaces.
+
+Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
+properties.
+
+Required properties:
+
+- compatible : Must be one of
+
+ "fastrax,uc430"
+ "linx,r4"
+ "wi2wi,w2sg0008i"
+ "wi2wi,w2sg0084i"
+
+- vcc-supply : Main voltage regulator (pin name: 3V3_IN, VCC, VDD)
+
+Required properties (I2C):
+- reg : I2C slave address
+
+Required properties (SPI):
+- reg : SPI chip select address
+
+Optional properties:
+
+- sirf,onoff-gpios : GPIO used to power on and off device (pin name: ON_OFF)
+- sirf,wakeup-gpios : GPIO used to determine device power state
+ (pin name: RFPWRUP, WAKEUP)
+- timepulse-gpios : Time pulse GPIO (pin name: 1PPS, TM)
+
+Example:
+
+serial@1234 {
+ compatible = "ns16550a";
+
+ gnss {
+ compatible = "wi2wi,w2sg0084i";
+
+ vcc-supply = <&gnss_reg>;
+ sirf,onoff-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ sirf,wakeup-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/gnss/u-blox.txt b/Documentation/devicetree/bindings/gnss/u-blox.txt
new file mode 100644
index 000000000000..e475659cb85f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/u-blox.txt
@@ -0,0 +1,44 @@
+u-blox GNSS Receiver DT binding
+
+The u-blox GNSS receivers can use UART, DDC (I2C), SPI and USB interfaces.
+
+Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
+properties.
+
+Required properties:
+
+- compatible : Must be one of
+
+ "u-blox,neo-8"
+ "u-blox,neo-m8"
+
+- vcc-supply : Main voltage regulator
+
+Required properties (DDC):
+- reg : DDC (I2C) slave address
+
+Required properties (SPI):
+- reg : SPI chip select address
+
+Required properties (USB):
+- reg : Number of the USB hub port or the USB host-controller port
+ to which this device is attached
+
+Optional properties:
+
+- timepulse-gpios : Time pulse GPIO
+- u-blox,extint-gpios : GPIO connected to the "external interrupt" input pin
+- v-bckp-supply : Backup voltage regulator
+
+Example:
+
+serial@1234 {
+ compatible = "ns16550a";
+
+ gnss {
+ compatible = "u-blox,neo-8";
+
+ v-bckp-supply = <&gnss_v_bckp_reg>;
+ vcc-supply = <&gnss_vcc_reg>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/mux/adi,adgs1408.txt b/Documentation/devicetree/bindings/mux/adi,adgs1408.txt
new file mode 100644
index 000000000000..be6947f4d86b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mux/adi,adgs1408.txt
@@ -0,0 +1,48 @@
+Bindings for Analog Devices ADGS1408/1409 8:1/Dual 4:1 Mux
+
+Required properties:
+- compatible : Should be one of
+ * "adi,adgs1408"
+ * "adi,adgs1409"
+* Standard mux-controller bindings as described in mux-controller.txt
+
+Optional properties for ADGS1408/1409:
+- gpio-controller : if present, #gpio-cells is required.
+- #gpio-cells : should be <2>
+ - First cell is the GPO line number, i.e. 0 to 3
+ for ADGS1408 and 0 to 4 for ADGS1409
+ - Second cell is used to specify active high (0)
+ or active low (1)
+
+Optional properties:
+- idle-state : if present, the state that the mux controller will have
+ when idle. The special state MUX_IDLE_AS_IS is the default and
+ MUX_IDLE_DISCONNECT is also supported.
+
+States 0 through 7 correspond to signals S1 through S8 in the datasheet.
+For ADGS1409 only states 0 to 3 are available.
+
+Example:
+
+ /*
+ * One mux controller.
+ * Mux state set to idle as is (no idle-state declared)
+ */
+ &spi0 {
+ mux: mux-controller@0 {
+ compatible = "adi,adgs1408";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ #mux-control-cells = <0>;
+ };
+ }
+
+ adc-mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 1>;
+ io-channel-names = "parent";
+ mux-controls = <&mux>;
+
+ channels = "out_a0", "out_a1", "test0", "test1",
+ "out_b0", "out_b1", "testb0", "testb1";
+ };
diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
index 729f6747813b..792bc5fafeb9 100644
--- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
+++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
@@ -1,7 +1,7 @@
Freescale i.MX6 On-Chip OTP Controller (OCOTP) device tree bindings
This binding represents the on-chip eFuse OTP controller found on
-i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX and i.MX6UL SoCs.
+i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL and i.MX6SLL SoCs.
Required properties:
- compatible: should be one of
@@ -10,6 +10,7 @@ Required properties:
"fsl,imx6sx-ocotp" (i.MX6SX),
"fsl,imx6ul-ocotp" (i.MX6UL),
"fsl,imx7d-ocotp" (i.MX7D/S),
+ "fsl,imx6sll-ocotp" (i.MX6SLL),
followed by "syscon".
- #address-cells : Should be 1
- #size-cells : Should be 1
diff --git a/Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt b/Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt
new file mode 100644
index 000000000000..586c08286aa9
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt
@@ -0,0 +1,52 @@
+= Spreadtrum SC27XX PMIC eFuse device tree bindings =
+
+Required properties:
+- compatible: Should be one of the following.
+ "sprd,sc2720-efuse"
+ "sprd,sc2721-efuse"
+ "sprd,sc2723-efuse"
+ "sprd,sc2730-efuse"
+ "sprd,sc2731-efuse"
+- reg: Specify the address offset of efuse controller.
+- hwlocks: Reference to a phandle of a hwlock provider node.
+
+= Data cells =
+Are child nodes of eFuse, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+Example:
+
+ sc2731_pmic: pmic@0 {
+ compatible = "sprd,sc2731";
+ reg = <0>;
+ spi-max-frequency = <26000000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ efuse@380 {
+ compatible = "sprd,sc2731-efuse";
+ reg = <0x380>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ hwlocks = <&hwlock 12>;
+
+ /* Data cells */
+ thermal_calib: calib@10 {
+ reg = <0x10 0x2>;
+ };
+ };
+ };
+
+= Data consumers =
+Are device nodes which consume nvmem data cells.
+
+Example:
+
+ thermal {
+ ...
+ nvmem-cells = <&thermal_calib>;
+ nvmem-cell-names = "calibration";
+ };
diff --git a/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt b/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt
new file mode 100644
index 000000000000..e94a2ad3a710
--- /dev/null
+++ b/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt
@@ -0,0 +1,84 @@
+Qualcomm SLIMBus Non Generic Device (NGD) Controller binding
+
+SLIMBus NGD controller is a light-weight driver responsible for communicating
+with SLIMBus slaves directly over the bus using messaging interface and
+communicating with master component residing on ADSP for bandwidth and
+data-channel management
+
+Please refer to slimbus/bus.txt for details of the common SLIMBus bindings.
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "qcom,slim-ngd-v<MAJOR>.<MINOR>.<STEP>"
+ must be one of the following.
+ "qcom,slim-ngd-v1.5.0" for MSM8996
+ "qcom,slim-ngd-v2.1.0" for SDM845
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: must specify the base address and size of the controller
+ register space.
+- dmas
+ Usage: required
+ Value type: <array of phandles>
+ Definition: List of rx and tx dma channels
+
+- dma-names
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "rx" and "tx".
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: must list controller IRQ.
+
+#address-cells
+ Usage: required
+ Value type: <u32>
+ Definition: Should be 1, reflecting the instance id of ngd.
+
+#size-cells
+ Usage: required
+ Value type: <u32>
+ Definition: Should be 0
+
+= NGD Devices
+Each subnode represents an instance of NGD, must contain the following
+properties:
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: Should be instance id of ngd.
+
+#address-cells
+ Usage: required
+ Refer to slimbus/bus.txt for details of the common SLIMBus bindings.
+
+#size-cells
+ Usage: required
+ Refer to slimbus/bus.txt for details of the common SLIMBus bindings.
+
+= EXAMPLE
+
+slim@91c0000 {
+ compatible = "qcom,slim-ngd-v1.5.0";
+ reg = <0x91c0000 0x2c000>;
+ interrupts = <0 163 0>;
+ dmas = <&slimbam 3>, <&slimbam 4>;
+ dma-names = "rx", "tx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ngd@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ codec@1 {
+ compatible = "slim217,1a0";
+ reg = <1 0>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index f32b79814dd7..2f3620547249 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -129,6 +129,7 @@ excito Excito
ezchip EZchip Semiconductor
fairphone Fairphone B.V.
faraday Faraday Technology Corporation
+fastrax Fastrax Oy
fcs Fairchild Semiconductor
firefly Firefly
focaltech FocalTech Systems Co.,Ltd
@@ -209,6 +210,7 @@ licheepi Lichee Pi
linaro Linaro Limited
linksys Belkin International, Inc. (Linksys)
linux Linux-specific binding
+linx Linx Technologies
lltc Linear Technology Corporation
logicpd Logic PD, Inc.
lsi LSI Corp. (LSI Logic)
@@ -390,6 +392,7 @@ tronsmart Tronsmart
truly Truly Semiconductors Limited
tsd Theobroma Systems Design und Consulting GmbH
tyan Tyan Computer Corporation
+u-blox u-blox
ucrobotics uCRobotics
ubnt Ubiquiti Networks
udoo Udoo
diff --git a/Documentation/driver-api/fpga/fpga-mgr.rst b/Documentation/driver-api/fpga/fpga-mgr.rst
index bcf2dd24e179..4b3825da48d9 100644
--- a/Documentation/driver-api/fpga/fpga-mgr.rst
+++ b/Documentation/driver-api/fpga/fpga-mgr.rst
@@ -83,7 +83,7 @@ The programming sequence is::
3. .write_complete
The .write_init function will prepare the FPGA to receive the image data. The
-buffer passed into .write_init will be atmost .initial_header_size bytes long,
+buffer passed into .write_init will be at most .initial_header_size bytes long;
if the whole bitstream is not immediately available then the core code will
buffer up at least this much before starting.
@@ -98,9 +98,9 @@ scatter list. This interface is suitable for drivers which use DMA.
The .write_complete function is called after all the image has been written
to put the FPGA into operating mode.
-The ops include a .state function which will read the hardware FPGA manager and
-return a code of type enum fpga_mgr_states. It doesn't result in a change in
-hardware state.
+The ops include a .state function which will determine the state the FPGA is in
+and return a code of type enum fpga_mgr_states. It doesn't result in a change
+in state.
How to write an image buffer to a supported FPGA
------------------------------------------------
@@ -181,8 +181,8 @@ API for implementing a new FPGA Manager driver
.. kernel-doc:: drivers/fpga/fpga-mgr.c
:functions: fpga_mgr_unregister
-API for programming a FPGA
---------------------------
+API for programming an FPGA
+---------------------------
.. kernel-doc:: include/linux/fpga/fpga-mgr.h
:functions: fpga_image_info
diff --git a/Documentation/driver-api/fpga/fpga-region.rst b/Documentation/driver-api/fpga/fpga-region.rst
index f89e4a311722..f30333ce828e 100644
--- a/Documentation/driver-api/fpga/fpga-region.rst
+++ b/Documentation/driver-api/fpga/fpga-region.rst
@@ -4,7 +4,7 @@ FPGA Region
Overview
--------
-This document is meant to be an brief overview of the FPGA region API usage. A
+This document is meant to be a brief overview of the FPGA region API usage. A
more conceptual look at regions can be found in the Device Tree binding
document [#f1]_.
@@ -31,11 +31,11 @@ fpga_image_info including:
* pointers to the image as either a scatter-gather buffer, a contiguous
buffer, or the name of firmware file
- * flags indicating specifics such as whether the image if for partial
+ * flags indicating specifics such as whether the image is for partial
reconfiguration.
-How to program a FPGA using a region
-------------------------------------
+How to program an FPGA using a region
+-------------------------------------
First, allocate the info struct::
@@ -77,8 +77,8 @@ An example of usage can be seen in the probe function of [#f2]_.
.. [#f1] ../devicetree/bindings/fpga/fpga-region.txt
.. [#f2] ../../drivers/fpga/of-fpga-region.c
-API to program a FGPA
----------------------
+API to program an FPGA
+----------------------
.. kernel-doc:: drivers/fpga/fpga-region.c
:functions: fpga_region_program_fpga
diff --git a/Documentation/driver-api/fpga/intro.rst b/Documentation/driver-api/fpga/intro.rst
index 51cd81dbb4dc..50d1cab84950 100644
--- a/Documentation/driver-api/fpga/intro.rst
+++ b/Documentation/driver-api/fpga/intro.rst
@@ -12,18 +12,18 @@ Linux. Some of the core intentions of the FPGA subsystems are:
* Code should not be shared between upper and lower layers. This
should go without saying. If that seems necessary, there's probably
- framework functionality that that can be added that will benefit
+ framework functionality that can be added that will benefit
other users. Write the linux-fpga mailing list and maintainers and
seek out a solution that expands the framework for broad reuse.
-* Generally, when adding code, think of the future. Plan for re-use.
+* Generally, when adding code, think of the future. Plan for reuse.
The framework in the kernel is divided into:
FPGA Manager
------------
-If you are adding a new FPGA or a new method of programming a FPGA,
+If you are adding a new FPGA or a new method of programming an FPGA,
this is the subsystem for you. Low level FPGA manager drivers contain
the knowledge of how to program a specific device. This subsystem
includes the framework in fpga-mgr.c and the low level drivers that
@@ -32,10 +32,10 @@ are registered with it.
FPGA Bridge
-----------
-FPGA Bridges prevent spurious signals from going out of a FPGA or a
-region of a FPGA during programming. They are disabled before
+FPGA Bridges prevent spurious signals from going out of an FPGA or a
+region of an FPGA during programming. They are disabled before
programming begins and re-enabled afterwards. An FPGA bridge may be
-actual hard hardware that gates a bus to a cpu or a soft ("freeze")
+actual hard hardware that gates a bus to a CPU or a soft ("freeze")
bridge in FPGA fabric that surrounds a partial reconfiguration region
of an FPGA. This subsystem includes fpga-bridge.c and the low level
drivers that are registered with it.
@@ -44,7 +44,7 @@ FPGA Region
-----------
If you are adding a new interface to the FPGA framework, add it on top
-of a FPGA region to allow the most reuse of your interface.
+of an FPGA region to allow the most reuse of your interface.
The FPGA Region framework (fpga-region.c) associates managers and
bridges as reconfigurable regions. A region may refer to the whole
diff --git a/Documentation/driver-api/slimbus.rst b/Documentation/driver-api/slimbus.rst
index a97449cf603a..410eec79b2a1 100644
--- a/Documentation/driver-api/slimbus.rst
+++ b/Documentation/driver-api/slimbus.rst
@@ -125,3 +125,8 @@ Messaging APIs:
~~~~~~~~~~~~~~~
.. kernel-doc:: drivers/slimbus/messaging.c
:export:
+
+Streaming APIs:
+~~~~~~~~~~~~~~~
+.. kernel-doc:: drivers/slimbus/stream.c
+ :export:
diff --git a/Documentation/fpga/dfl.txt b/Documentation/fpga/dfl.txt
new file mode 100644
index 000000000000..6df4621c3f2a
--- /dev/null
+++ b/Documentation/fpga/dfl.txt
@@ -0,0 +1,285 @@
+===============================================================================
+ FPGA Device Feature List (DFL) Framework Overview
+-------------------------------------------------------------------------------
+ Enno Luebbers <enno.luebbers@intel.com>
+ Xiao Guangrong <guangrong.xiao@linux.intel.com>
+ Wu Hao <hao.wu@intel.com>
+
+The Device Feature List (DFL) FPGA framework (and drivers according to this
+this framework) hides the very details of low layer hardwares and provides
+unified interfaces to userspace. Applications could use these interfaces to
+configure, enumerate, open and access FPGA accelerators on platforms which
+implement the DFL in the device memory. Besides this, the DFL framework
+enables system level management functions such as FPGA reconfiguration.
+
+
+Device Feature List (DFL) Overview
+==================================
+Device Feature List (DFL) defines a linked list of feature headers within the
+device MMIO space to provide an extensible way of adding features. Software can
+walk through these predefined data structures to enumerate FPGA features:
+FPGA Interface Unit (FIU), Accelerated Function Unit (AFU) and Private Features,
+as illustrated below:
+
+ Header Header Header Header
+ +----------+ +-->+----------+ +-->+----------+ +-->+----------+
+ | Type | | | Type | | | Type | | | Type |
+ | FIU | | | Private | | | Private | | | Private |
+ +----------+ | | Feature | | | Feature | | | Feature |
+ | Next_DFH |--+ +----------+ | +----------+ | +----------+
+ +----------+ | Next_DFH |--+ | Next_DFH |--+ | Next_DFH |--> NULL
+ | ID | +----------+ +----------+ +----------+
+ +----------+ | ID | | ID | | ID |
+ | Next_AFU |--+ +----------+ +----------+ +----------+
+ +----------+ | | Feature | | Feature | | Feature |
+ | Header | | | Register | | Register | | Register |
+ | Register | | | Set | | Set | | Set |
+ | Set | | +----------+ +----------+ +----------+
+ +----------+ | Header
+ +-->+----------+
+ | Type |
+ | AFU |
+ +----------+
+ | Next_DFH |--> NULL
+ +----------+
+ | GUID |
+ +----------+
+ | Header |
+ | Register |
+ | Set |
+ +----------+
+
+FPGA Interface Unit (FIU) represents a standalone functional unit for the
+interface to FPGA, e.g. the FPGA Management Engine (FME) and Port (more
+descriptions on FME and Port in later sections).
+
+Accelerated Function Unit (AFU) represents a FPGA programmable region and
+always connects to a FIU (e.g. a Port) as its child as illustrated above.
+
+Private Features represent sub features of the FIU and AFU. They could be
+various function blocks with different IDs, but all private features which
+belong to the same FIU or AFU, must be linked to one list via the Next Device
+Feature Header (Next_DFH) pointer.
+
+Each FIU, AFU and Private Feature could implement its own functional registers.
+The functional register set for FIU and AFU, is named as Header Register Set,
+e.g. FME Header Register Set, and the one for Private Feature, is named as
+Feature Register Set, e.g. FME Partial Reconfiguration Feature Register Set.
+
+This Device Feature List provides a way of linking features together, it's
+convenient for software to locate each feature by walking through this list,
+and can be implemented in register regions of any FPGA device.
+
+
+FIU - FME (FPGA Management Engine)
+==================================
+The FPGA Management Engine performs reconfiguration and other infrastructure
+functions. Each FPGA device only has one FME.
+
+User-space applications can acquire exclusive access to the FME using open(),
+and release it using close().
+
+The following functions are exposed through ioctls:
+
+ Get driver API version (DFL_FPGA_GET_API_VERSION)
+ Check for extensions (DFL_FPGA_CHECK_EXTENSION)
+ Program bitstream (DFL_FPGA_FME_PORT_PR)
+
+More functions are exposed through sysfs
+(/sys/class/fpga_region/regionX/dfl-fme.n/):
+
+ Read bitstream ID (bitstream_id)
+ bitstream_id indicates version of the static FPGA region.
+
+ Read bitstream metadata (bitstream_metadata)
+ bitstream_metadata includes detailed information of static FPGA region,
+ e.g. synthesis date and seed.
+
+ Read number of ports (ports_num)
+ one FPGA device may have more than one port, this sysfs interface indicates
+ how many ports the FPGA device has.
+
+
+FIU - PORT
+==========
+A port represents the interface between the static FPGA fabric and a partially
+reconfigurable region containing an AFU. It controls the communication from SW
+to the accelerator and exposes features such as reset and debug. Each FPGA
+device may have more than one port, but always one AFU per port.
+
+
+AFU
+===
+An AFU is attached to a port FIU and exposes a fixed length MMIO region to be
+used for accelerator-specific control registers.
+
+User-space applications can acquire exclusive access to an AFU attached to a
+port by using open() on the port device node and release it using close().
+
+The following functions are exposed through ioctls:
+
+ Get driver API version (DFL_FPGA_GET_API_VERSION)
+ Check for extensions (DFL_FPGA_CHECK_EXTENSION)
+ Get port info (DFL_FPGA_PORT_GET_INFO)
+ Get MMIO region info (DFL_FPGA_PORT_GET_REGION_INFO)
+ Map DMA buffer (DFL_FPGA_PORT_DMA_MAP)
+ Unmap DMA buffer (DFL_FPGA_PORT_DMA_UNMAP)
+ Reset AFU (*DFL_FPGA_PORT_RESET)
+
+*DFL_FPGA_PORT_RESET: reset the FPGA Port and its AFU. Userspace can do Port
+reset at any time, e.g. during DMA or Partial Reconfiguration. But it should
+never cause any system level issue, only functional failure (e.g. DMA or PR
+operation failure) and be recoverable from the failure.
+
+User-space applications can also mmap() accelerator MMIO regions.
+
+More functions are exposed through sysfs:
+(/sys/class/fpga_region/<regionX>/<dfl-port.m>/):
+
+ Read Accelerator GUID (afu_id)
+ afu_id indicates which PR bitstream is programmed to this AFU.
+
+
+DFL Framework Overview
+======================
+
+ +----------+ +--------+ +--------+ +--------+
+ | FME | | AFU | | AFU | | AFU |
+ | Module | | Module | | Module | | Module |
+ +----------+ +--------+ +--------+ +--------+
+ +-----------------------+
+ | FPGA Container Device | Device Feature List
+ | (FPGA Base Region) | Framework
+ +-----------------------+
+--------------------------------------------------------------------
+ +----------------------------+
+ | FPGA DFL Device Module |
+ | (e.g. PCIE/Platform Device)|
+ +----------------------------+
+ +------------------------+
+ | FPGA Hardware Device |
+ +------------------------+
+
+DFL framework in kernel provides common interfaces to create container device
+(FPGA base region), discover feature devices and their private features from the
+given Device Feature Lists and create platform devices for feature devices
+(e.g. FME, Port and AFU) with related resources under the container device. It
+also abstracts operations for the private features and exposes common ops to
+feature device drivers.
+
+The FPGA DFL Device could be different hardwares, e.g. PCIe device, platform
+device and etc. Its driver module is always loaded first once the device is
+created by the system. This driver plays an infrastructural role in the
+driver architecture. It locates the DFLs in the device memory, handles them
+and related resources to common interfaces from DFL framework for enumeration.
+(Please refer to drivers/fpga/dfl.c for detailed enumeration APIs).
+
+The FPGA Management Engine (FME) driver is a platform driver which is loaded
+automatically after FME platform device creation from the DFL device module. It
+provides the key features for FPGA management, including:
+
+ a) Expose static FPGA region information, e.g. version and metadata.
+ Users can read related information via sysfs interfaces exposed
+ by FME driver.
+
+ b) Partial Reconfiguration. The FME driver creates FPGA manager, FPGA
+ bridges and FPGA regions during PR sub feature initialization. Once
+ it receives a DFL_FPGA_FME_PORT_PR ioctl from user, it invokes the
+ common interface function from FPGA Region to complete the partial
+ reconfiguration of the PR bitstream to the given port.
+
+Similar to the FME driver, the FPGA Accelerated Function Unit (AFU) driver is
+probed once the AFU platform device is created. The main function of this module
+is to provide an interface for userspace applications to access the individual
+accelerators, including basic reset control on port, AFU MMIO region export, dma
+buffer mapping service functions.
+
+After feature platform devices creation, matched platform drivers will be loaded
+automatically to handle different functionalities. Please refer to next sections
+for detailed information on functional units which have been already implemented
+under this DFL framework.
+
+
+Partial Reconfiguration
+=======================
+As mentioned above, accelerators can be reconfigured through partial
+reconfiguration of a PR bitstream file. The PR bitstream file must have been
+generated for the exact static FPGA region and targeted reconfigurable region
+(port) of the FPGA, otherwise, the reconfiguration operation will fail and
+possibly cause system instability. This compatibility can be checked by
+comparing the compatibility ID noted in the header of PR bitstream file against
+the compat_id exposed by the target FPGA region. This check is usually done by
+userspace before calling the reconfiguration IOCTL.
+
+
+Device enumeration
+==================
+This section introduces how applications enumerate the fpga device from
+the sysfs hierarchy under /sys/class/fpga_region.
+
+In the example below, two DFL based FPGA devices are installed in the host. Each
+fpga device has one FME and two ports (AFUs).
+
+FPGA regions are created under /sys/class/fpga_region/
+
+ /sys/class/fpga_region/region0
+ /sys/class/fpga_region/region1
+ /sys/class/fpga_region/region2
+ ...
+
+Application needs to search each regionX folder, if feature device is found,
+(e.g. "dfl-port.n" or "dfl-fme.m" is found), then it's the base
+fpga region which represents the FPGA device.
+
+Each base region has one FME and two ports (AFUs) as child devices:
+
+ /sys/class/fpga_region/region0/dfl-fme.0
+ /sys/class/fpga_region/region0/dfl-port.0
+ /sys/class/fpga_region/region0/dfl-port.1
+ ...
+
+ /sys/class/fpga_region/region3/dfl-fme.1
+ /sys/class/fpga_region/region3/dfl-port.2
+ /sys/class/fpga_region/region3/dfl-port.3
+ ...
+
+In general, the FME/AFU sysfs interfaces are named as follows:
+
+ /sys/class/fpga_region/<regionX>/<dfl-fme.n>/
+ /sys/class/fpga_region/<regionX>/<dfl-port.m>/
+
+with 'n' consecutively numbering all FMEs and 'm' consecutively numbering all
+ports.
+
+The device nodes used for ioctl() or mmap() can be referenced through:
+
+ /sys/class/fpga_region/<regionX>/<dfl-fme.n>/dev
+ /sys/class/fpga_region/<regionX>/<dfl-port.n>/dev
+
+
+Add new FIUs support
+====================
+It's possible that developers made some new function blocks (FIUs) under this
+DFL framework, then new platform device driver needs to be developed for the
+new feature dev (FIU) following the same way as existing feature dev drivers
+(e.g. FME and Port/AFU platform device driver). Besides that, it requires
+modification on DFL framework enumeration code too, for new FIU type detection
+and related platform devices creation.
+
+
+Add new private features support
+================================
+In some cases, we may need to add some new private features to existing FIUs
+(e.g. FME or Port). Developers don't need to touch enumeration code in DFL
+framework, as each private feature will be parsed automatically and related
+mmio resources can be found under FIU platform device created by DFL framework.
+Developer only needs to provide a sub feature driver with matched feature id.
+FME Partial Reconfiguration Sub Feature driver (see drivers/fpga/dfl-fme-pr.c)
+could be a reference.
+
+
+Open discussion
+===============
+FME driver exports one ioctl (DFL_FPGA_FME_PORT_PR) for partial reconfiguration
+to user now. In the future, if unified user interfaces for reconfiguration are
+added, FME driver should switch to them from ioctl interface.
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index d6ed527985cf..13a7c999c04a 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -324,6 +324,7 @@ Code Seq#(hex) Include File Comments
0xB3 00 linux/mmc/ioctl.h
0xB4 00-0F linux/gpio.h <mailto:linux-gpio@vger.kernel.org>
0xB5 00-0F uapi/linux/rpmsg.h <mailto:linux-remoteproc@vger.kernel.org>
+0xB6 all linux/fpga-dfl.h
0xC0 00-0F linux/usb/iowarrior.h
0xCA 00-0F uapi/misc/cxl.h
0xCA 10-2F uapi/misc/ocxl.h
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index eded671d55eb..59585030cbaf 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -39,6 +39,7 @@ show up in /proc/sys/kernel:
- hung_task_check_count
- hung_task_timeout_secs
- hung_task_warnings
+- hyperv_record_panic_msg
- kexec_load_disabled
- kptr_restrict
- l2cr [ PPC only ]
@@ -374,6 +375,16 @@ This file shows up if CONFIG_DETECT_HUNG_TASK is enabled.
==============================================================
+hyperv_record_panic_msg:
+
+Controls whether the panic kmsg data should be reported to Hyper-V.
+
+0: do not report panic kmsg data.
+
+1: report the panic kmsg data. This is the default behavior.
+
+==============================================================
+
kexec_load_disabled:
A toggle indicating if the kexec_load syscall has been disabled. This
diff --git a/Documentation/w1/slaves/w1_ds2438 b/Documentation/w1/slaves/w1_ds2438
index b99f3674c5b4..e64f65a09387 100644
--- a/Documentation/w1/slaves/w1_ds2438
+++ b/Documentation/w1/slaves/w1_ds2438
@@ -60,4 +60,4 @@ vad: general purpose A/D input (VAD)
vdd: battery input (VDD)
After the voltage conversion the value is returned as decimal ASCII.
-Note: The value is in mV, so to get a volts the value has to be divided by 10.
+Note: To get a volts the value has to be divided by 100.