summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2023-02-24 23:17:14 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2023-02-24 23:17:14 +0300
commit17cd4d6f05087ea1ae5c1416ef260e5b7fc5d5c9 (patch)
treebf06872140bc74115625e34f590b9ccc6270cbd6 /Documentation
parent72bffe7e1eb6cb82b90aa14cd786f3f5ede9e0ae (diff)
parent72206cc730b5c9208e9a99ace1c619f542035312 (diff)
downloadlinux-17cd4d6f05087ea1ae5c1416ef260e5b7fc5d5c9.tar.xz
Merge tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH: "Here is the big set of serial and tty driver updates for 6.3-rc1. Once again, Jiri and Ilpo have done a number of core vt and tty/serial layer cleanups that were much needed and appreciated. Other than that, it's just a bunch of little tty/serial driver updates: - qcom-geni-serial driver updates - liteuart driver updates - hvcs driver cleanups - n_gsm updates and additions for new features - more 8250 device support added - fpga/dfl update and additions - imx serial driver updates - fsl_lpuart updates - other tiny fixes and updates for serial drivers All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits) tty: n_gsm: add keep alive support serial: imx: remove a redundant check dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h tty: n_gsm: add TIOCMIWAIT support tty: n_gsm: add RING/CD control support tty: n_gsm: mark unusable ioctl structure fields accordingly serial: imx: get rid of registers shadowing serial: imx: refine local variables in rxint() serial: imx: stop using USR2 in FIFO reading loop serial: imx: remove redundant USR2 read from FIFO reading loop serial: imx: do not break from FIFO reading loop prematurely serial: imx: do not sysrq broken chars serial: imx: work-around for hardware RX flood serial: imx: factor-out common code to imx_uart_soft_reset() serial: 8250_pci1xxxx: Add power management functions to quad-uart driver serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver serial: 8250_pci1xxxx: Add driver for quad-uart support serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c tty: pcn_uart: fix memory leak with using debugfs_lookup() ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/admin-guide/kernel-parameters.txt12
-rw-r--r--Documentation/devicetree/bindings/serial/8250.yaml10
-rw-r--r--Documentation/devicetree/bindings/serial/8250_omap.yaml23
-rw-r--r--Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml15
-rw-r--r--Documentation/devicetree/bindings/serial/cdns,uart.yaml27
-rw-r--r--Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml2
-rw-r--r--Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml11
-rw-r--r--Documentation/devicetree/bindings/serial/fsl-lpuart.yaml6
-rw-r--r--Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml2
-rw-r--r--Documentation/devicetree/bindings/serial/pl011.yaml1
-rw-r--r--Documentation/devicetree/bindings/serial/qcom,msm-uart.txt25
-rw-r--r--Documentation/devicetree/bindings/serial/qcom,msm-uart.yaml56
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,em-uart.yaml10
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,hscif.yaml26
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,sci.yaml24
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,scif.yaml24
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,scifa.yaml22
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,scifb.yaml12
-rw-r--r--Documentation/devicetree/bindings/serial/rs485.yaml6
-rw-r--r--Documentation/devicetree/bindings/serial/serial.yaml18
-rw-r--r--Documentation/devicetree/bindings/serial/sifive-serial.yaml6
-rw-r--r--Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml8
-rw-r--r--Documentation/devicetree/bindings/serial/st,stm32-uart.yaml7
-rw-r--r--Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml6
-rw-r--r--Documentation/driver-api/tty/n_gsm.rst19
-rw-r--r--Documentation/fpga/dfl.rst119
26 files changed, 340 insertions, 157 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 276a793168a6..8faec13961cd 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1172,10 +1172,10 @@
specified, the serial port must already be setup and
configured.
- uart[8250],io,<addr>[,options]
- uart[8250],mmio,<addr>[,options]
- uart[8250],mmio32,<addr>[,options]
- uart[8250],mmio32be,<addr>[,options]
+ uart[8250],io,<addr>[,options[,uartclk]]
+ uart[8250],mmio,<addr>[,options[,uartclk]]
+ uart[8250],mmio32,<addr>[,options[,uartclk]]
+ uart[8250],mmio32be,<addr>[,options[,uartclk]]
uart[8250],0x<addr>[,options]
Start an early, polled-mode console on the 8250/16550
UART at the specified I/O port or MMIO address.
@@ -1184,7 +1184,9 @@
If none of [io|mmio|mmio32|mmio32be], <addr> is assumed
to be equivalent to 'mmio'. 'options' are specified
in the same format described for "console=ttyS<n>"; if
- unspecified, the h/w is not initialized.
+ unspecified, the h/w is not initialized. 'uartclk' is
+ the uart clock frequency; if unspecified, it is set
+ to 'BASE_BAUD' * 16.
pl011,<addr>
pl011,mmio32,<addr>
diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml
index 34b8e59aa9d4..c55865fd371a 100644
--- a/Documentation/devicetree/bindings/serial/8250.yaml
+++ b/Documentation/devicetree/bindings/serial/8250.yaml
@@ -62,7 +62,6 @@ properties:
- const: mrvl,pxa-uart
- const: nuvoton,wpcm450-uart
- const: nuvoton,npcm750-uart
- - const: nuvoton,npcm845-uart
- const: nvidia,tegra20-uart
- const: nxp,lpc3220-uart
- items:
@@ -94,6 +93,10 @@ properties:
- ns16550a
- items:
- enum:
+ - nuvoton,npcm845-uart
+ - const: nuvoton,npcm750-uart
+ - items:
+ - enum:
- ralink,mt7620a-uart
- ralink,rt3052-uart
- ralink,rt3883-uart
@@ -200,12 +203,13 @@ properties:
deprecated: true
aspeed,lpc-io-reg:
- $ref: '/schemas/types.yaml#/definitions/uint32'
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ maxItems: 1
description: |
The VUART LPC address. Only applicable to aspeed,ast2500-vuart.
aspeed,lpc-interrupts:
- $ref: "/schemas/types.yaml#/definitions/uint32-array"
+ $ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 2
maxItems: 2
description: |
diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml
index 53dc1212ad2e..eb3488d8f9ee 100644
--- a/Documentation/devicetree/bindings/serial/8250_omap.yaml
+++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml
@@ -70,11 +70,6 @@ properties:
dsr-gpios: true
rng-gpios: true
dcd-gpios: true
- rs485-rts-delay: true
- rs485-rts-active-low: true
- rs485-rx-during-tx: true
- rs485-rts-active-high: true
- linux,rs485-enabled-at-boot-time: true
rts-gpio: true
power-domains: true
clock-frequency: true
@@ -109,12 +104,12 @@ else:
examples:
- |
- serial@49042000 {
- compatible = "ti,omap3-uart";
- reg = <0x49042000 0x400>;
- interrupts = <80>;
- dmas = <&sdma 81 &sdma 82>;
- dma-names = "tx", "rx";
- ti,hwmods = "uart4";
- clock-frequency = <48000000>;
- };
+ serial@49042000 {
+ compatible = "ti,omap3-uart";
+ reg = <0x49042000 0x400>;
+ interrupts = <80>;
+ dmas = <&sdma 81 &sdma 82>;
+ dma-names = "tx", "rx";
+ ti,hwmods = "uart4";
+ clock-frequency = <48000000>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
index 7822705ad16c..3cbdde85ed71 100644
--- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
@@ -19,6 +19,9 @@ description: |
is active since power-on and does not need any clock gating and is usable
as very early serial console.
+allOf:
+ - $ref: serial.yaml#
+
properties:
compatible:
oneOf:
@@ -69,14 +72,14 @@ required:
- clocks
- clock-names
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
serial@84c0 {
- compatible = "amlogic,meson-gx-uart";
- reg = <0x84c0 0x14>;
- interrupts = <26>;
- clocks = <&xtal>, <&pclk>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
+ compatible = "amlogic,meson-gx-uart";
+ reg = <0x84c0 0x14>;
+ interrupts = <26>;
+ clocks = <&xtal>, <&pclk>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
};
diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
index 876b8cf1cafb..a8b323d7bf94 100644
--- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -9,9 +9,6 @@ title: Cadence UART Controller
maintainers:
- Michal Simek <michal.simek@xilinx.com>
-allOf:
- - $ref: /schemas/serial.yaml#
-
properties:
compatible:
oneOf:
@@ -46,6 +43,9 @@ properties:
port does not use this pin.
type: boolean
+ power-domains:
+ maxItems: 1
+
required:
- compatible
- reg
@@ -53,14 +53,25 @@ required:
- clocks
- clock-names
+allOf:
+ - $ref: serial.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: cdns,uart-r1p8
+ then:
+ properties:
+ power-domains: false
+
unevaluatedProperties: false
examples:
- |
uart0: serial@e0000000 {
- compatible = "xlnx,xuartps", "cdns,uart-r1p8";
- clocks = <&clkc 23>, <&clkc 40>;
- clock-names = "uart_clk", "pclk";
- reg = <0xE0000000 0x1000>;
- interrupts = <0 27 4>;
+ compatible = "xlnx,xuartps", "cdns,uart-r1p8";
+ clocks = <&clkc 23>, <&clkc 40>;
+ clock-names = "uart_clk", "pclk";
+ reg = <0xe0000000 0x1000>;
+ interrupts = <0 27 4>;
};
diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
index 8b643bae3c7b..920539926d7e 100644
--- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
@@ -16,7 +16,7 @@ maintainers:
- Chester Lin <clin@suse.com>
allOf:
- - $ref: "serial.yaml"
+ - $ref: serial.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
index 9d949296a142..4cbe76e1715b 100644
--- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
@@ -10,8 +10,8 @@ maintainers:
- Fabio Estevam <festevam@gmail.com>
allOf:
- - $ref: "serial.yaml"
- - $ref: "rs485.yaml"
+ - $ref: serial.yaml#
+ - $ref: rs485.yaml#
properties:
compatible:
@@ -83,13 +83,6 @@ properties:
are sensible for most use cases. If you need low latency processing on
slow connections this needs to be configured appropriately.
- uart-has-rtscts: true
-
- rs485-rts-delay: true
- rs485-rts-active-low: true
- rs485-rx-during-tx: true
- linux,rs485-enabled-at-boot-time: true
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
index 74f75f669e77..ab81722293d3 100644
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
@@ -10,7 +10,8 @@ maintainers:
- Fugang Duan <fugang.duan@nxp.com>
allOf:
- - $ref: "rs485.yaml"
+ - $ref: rs485.yaml#
+ - $ref: serial.yaml#
properties:
compatible:
@@ -64,9 +65,6 @@ properties:
- const: rx
- const: tx
- rs485-rts-active-low: true
- linux,rs485-enabled-at-boot-time: true
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
index 14c7594c88c6..6a400a5e6fc7 100644
--- a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
@@ -10,7 +10,7 @@ maintainers:
- Fabio Estevam <festevam@gmail.com>
allOf:
- - $ref: "serial.yaml"
+ - $ref: serial.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml
index 80af72859876..9571041030b7 100644
--- a/Documentation/devicetree/bindings/serial/pl011.yaml
+++ b/Documentation/devicetree/bindings/serial/pl011.yaml
@@ -10,6 +10,7 @@ maintainers:
- Rob Herring <robh@kernel.org>
allOf:
+ - $ref: /schemas/arm/primecell.yaml#
- $ref: serial.yaml#
# Need a custom select here or 'arm,primecell' will match on lots of nodes
diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uart.txt b/Documentation/devicetree/bindings/serial/qcom,msm-uart.txt
deleted file mode 100644
index ce8c90161959..000000000000
--- a/Documentation/devicetree/bindings/serial/qcom,msm-uart.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* MSM Serial UART
-
-The MSM serial UART hardware is designed for low-speed use cases where a
-dma-engine isn't needed. From a software perspective it's mostly compatible
-with the MSM serial UARTDM except that it only supports reading and writing one
-character at a time.
-
-Required properties:
-- compatible: Should contain "qcom,msm-uart"
-- reg: Should contain UART register location and length.
-- interrupts: Should contain UART interrupt.
-- clocks: Should contain the core clock.
-- clock-names: Should be "core".
-
-Example:
-
-A uart device at 0xa9c00000 with interrupt 11.
-
-serial@a9c00000 {
- compatible = "qcom,msm-uart";
- reg = <0xa9c00000 0x1000>;
- interrupts = <11>;
- clocks = <&uart_cxc>;
- clock-names = "core";
-};
diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uart.yaml b/Documentation/devicetree/bindings/serial/qcom,msm-uart.yaml
new file mode 100644
index 000000000000..a052aaef21f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/qcom,msm-uart.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/qcom,msm-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM SoC Serial UART
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ The MSM serial UART hardware is designed for low-speed use cases where a
+ dma-engine isn't needed. From a software perspective it's mostly compatible
+ with the MSM serial UARTDM except that it only supports reading and writing
+ one character at a time.
+
+properties:
+ compatible:
+ const: qcom,msm-uart
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: core
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - clock-names
+ - clocks
+ - interrupts
+ - reg
+
+unevaluatedProperties: false
+
+allOf:
+ - $ref: /schemas/serial/serial.yaml#
+
+examples:
+ - |
+ serial@a9c00000 {
+ compatible = "qcom,msm-uart";
+ reg = <0xa9c00000 0x1000>;
+ interrupts = <11>;
+ clocks = <&uart_cxc>;
+ clock-names = "core";
+ };
diff --git a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
index b25aca733b72..12d0fa34f9f9 100644
--- a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
@@ -66,9 +66,9 @@ examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
uart0: serial@e1020000 {
- compatible = "renesas,em-uart";
- reg = <0xe1020000 0x38>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usia_u0_sclk>;
- clock-names = "sclk";
+ compatible = "renesas,em-uart";
+ reg = <0xe1020000 0x38>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usia_u0_sclk>;
+ clock-names = "sclk";
};
diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
index 1957b9d782e8..afedb6edfc34 100644
--- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
@@ -131,20 +131,20 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a7795-sysc.h>
aliases {
- serial1 = &hscif1;
+ serial1 = &hscif1;
};
hscif1: serial@e6550000 {
- compatible = "renesas,hscif-r8a7795", "renesas,rcar-gen3-hscif",
- "renesas,hscif";
- reg = <0xe6550000 96>;
- interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 519>, <&cpg CPG_CORE R8A7795_CLK_S3D1>,
- <&scif_clk>;
- clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac1 0x33>, <&dmac1 0x32>, <&dmac2 0x33>, <&dmac2 0x32>;
- dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 519>;
- uart-has-rtscts;
+ compatible = "renesas,hscif-r8a7795", "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0xe6550000 96>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 519>, <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x33>, <&dmac1 0x32>, <&dmac2 0x33>, <&dmac2 0x32>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 519>;
+ uart-has-rtscts;
};
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci.yaml b/Documentation/devicetree/bindings/serial/renesas,sci.yaml
index bf7708a7a2c0..dc445b327e0b 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,sci.yaml
@@ -91,19 +91,19 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
aliases {
- serial0 = &sci0;
+ serial0 = &sci0;
};
sci0: serial@1004d000 {
- compatible = "renesas,r9a07g044-sci", "renesas,sci";
- reg = <0x1004d000 0x400>;
- interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "eri", "rxi", "txi", "tei";
- clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>;
- clock-names = "fck";
- power-domains = <&cpg>;
- resets = <&cpg R9A07G044_SCI0_RST>;
+ compatible = "renesas,r9a07g044-sci", "renesas,sci";
+ reg = <0x1004d000 0x400>;
+ interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_SCI0_RST>;
};
diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
index f81f2d67a1ed..1989bd67d04e 100644
--- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
@@ -180,19 +180,19 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a7791-sysc.h>
aliases {
- serial0 = &scif0;
+ serial0 = &scif0;
};
scif0: serial@e6e60000 {
- compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
- "renesas,scif";
- reg = <0xe6e60000 64>;
- interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
- <&scif_clk>;
- clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>;
- dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
- resets = <&cpg 721>;
+ compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+ "renesas,scif";
+ reg = <0xe6e60000 64>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 721>;
};
diff --git a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
index 3c67d3202e1b..4c3b5e7270da 100644
--- a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
@@ -95,18 +95,18 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a7790-sysc.h>
aliases {
- serial0 = &scifa0;
+ serial0 = &scifa0;
};
scifa0: serial@e6c40000 {
- compatible = "renesas,scifa-r8a7790", "renesas,rcar-gen2-scifa",
- "renesas,scifa";
- reg = <0xe6c40000 64>;
- interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 204>;
- clock-names = "fck";
- power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
- resets = <&cpg 204>;
- dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>;
- dma-names = "tx", "rx", "tx", "rx";
+ compatible = "renesas,scifa-r8a7790", "renesas,rcar-gen2-scifa",
+ "renesas,scifa";
+ reg = <0xe6c40000 64>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 204>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 204>;
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>;
+ dma-names = "tx", "rx", "tx", "rx";
};
diff --git a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
index d5571c7a4424..2f7cbbb48960 100644
--- a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
@@ -94,10 +94,10 @@ examples:
#include <dt-bindings/clock/r8a7740-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
scifb: serial@e6c30000 {
- compatible = "renesas,scifb-r8a7740", "renesas,scifb";
- reg = <0xe6c30000 0x100>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
- clock-names = "fck";
- power-domains = <&pd_a3sp>;
+ compatible = "renesas,scifb-r8a7740", "renesas,scifb";
+ reg = <0xe6c30000 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
+ clock-names = "fck";
+ power-domains = <&pd_a3sp>;
};
diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml
index 789763cf427a..303a443d9e29 100644
--- a/Documentation/devicetree/bindings/serial/rs485.yaml
+++ b/Documentation/devicetree/bindings/serial/rs485.yaml
@@ -51,6 +51,12 @@ properties:
description: GPIO pin to enable RS485 bus termination.
maxItems: 1
+ rs485-rx-during-tx-gpios:
+ description: Output GPIO pin that sets the state of rs485-rx-during-tx. This
+ signal can be used to control the RX part of an RS485 transceiver. Thereby
+ the active state enables RX during TX.
+ maxItems: 1
+
additionalProperties: true
...
diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml
index 11e822bf09e2..e05ad3ac2abc 100644
--- a/Documentation/devicetree/bindings/serial/serial.yaml
+++ b/Documentation/devicetree/bindings/serial/serial.yaml
@@ -141,13 +141,13 @@ additionalProperties: true
examples:
- |
serial@1234 {
- compatible = "ns16550a";
- reg = <0x1234 0x20>;
- interrupts = <1>;
-
- bluetooth {
- compatible = "brcm,bcm4330-bt";
- interrupt-parent = <&gpio>;
- interrupts = <10>;
- };
+ compatible = "ns16550a";
+ reg = <0x1234 0x20>;
+ interrupts = <1>;
+
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+ interrupt-parent = <&gpio>;
+ interrupts = <10>;
+ };
};
diff --git a/Documentation/devicetree/bindings/serial/sifive-serial.yaml b/Documentation/devicetree/bindings/serial/sifive-serial.yaml
index b0a8871e3641..b0df1cac4968 100644
--- a/Documentation/devicetree/bindings/serial/sifive-serial.yaml
+++ b/Documentation/devicetree/bindings/serial/sifive-serial.yaml
@@ -53,13 +53,13 @@ unevaluatedProperties: false
examples:
- |
- #include <dt-bindings/clock/sifive-fu540-prci.h>
- serial@10010000 {
+ #include <dt-bindings/clock/sifive-fu540-prci.h>
+ serial@10010000 {
compatible = "sifive,fu540-c000-uart", "sifive,uart0";
interrupt-parent = <&plic0>;
interrupts = <80>;
reg = <0x10010000 0x1000>;
clocks = <&prci FU540_PRCI_CLK_TLCLK>;
- };
+ };
...
diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
index b9c2287c5d1e..2becdfab4f15 100644
--- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
@@ -67,6 +67,14 @@ properties:
- const: baudclk
- const: apb_pclk
+ dmas:
+ minItems: 2
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
snps,uart-16550-compatible:
description: reflects the value of UART_16550_COMPATIBLE configuration
parameter. Define this if your UART does not implement the busy functionality.
diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
index 85876c668f6d..1df8ffe95fc6 100644
--- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
@@ -35,8 +35,6 @@ properties:
description: enable hardware flow control (deprecated)
$ref: /schemas/types.yaml#/definitions/flag
- uart-has-rtscts: true
-
rx-tx-swap: true
dmas:
@@ -60,11 +58,6 @@ properties:
wakeup-source: true
- rs485-rts-delay: true
- rs485-rts-active-low: true
- linux,rs485-enabled-at-boot-time: true
- rs485-rx-during-tx: true
-
rx-threshold:
description:
If value is set to 1, RX FIFO threshold is disabled.
diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
index 2f4390e8d4e8..08dcb275d8e2 100644
--- a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
+++ b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
@@ -63,7 +63,7 @@ required:
- xlnx,use-parity
allOf:
- - $ref: /schemas/serial.yaml#
+ - $ref: serial.yaml#
- if:
properties:
xlnx,use-parity:
@@ -76,7 +76,7 @@ unevaluatedProperties: false
examples:
- |
- serial@800c0000 {
+ serial@800c0000 {
compatible = "xlnx,xps-uartlite-1.00.a";
reg = <0x800c0000 0x10000>;
interrupts = <0x0 0x6e 0x1>;
@@ -84,5 +84,5 @@ examples:
current-speed = <115200>;
xlnx,data-bits = <8>;
xlnx,use-parity = <0>;
- };
+ };
...
diff --git a/Documentation/driver-api/tty/n_gsm.rst b/Documentation/driver-api/tty/n_gsm.rst
index 35d7381515b0..9447b8a3b8e2 100644
--- a/Documentation/driver-api/tty/n_gsm.rst
+++ b/Documentation/driver-api/tty/n_gsm.rst
@@ -25,6 +25,8 @@ Config Initiator
#. Switch the serial line to using the n_gsm line discipline by using
``TIOCSETD`` ioctl.
+#. Configure the mux using ``GSMIOC_GETCONF_EXT``/``GSMIOC_SETCONF_EXT`` ioctl if needed.
+
#. Configure the mux using ``GSMIOC_GETCONF``/``GSMIOC_SETCONF`` ioctl.
#. Obtain base gsmtty number for the used serial port.
@@ -42,6 +44,7 @@ Config Initiator
int ldisc = N_GSM0710;
struct gsm_config c;
+ struct gsm_config_ext ce;
struct termios configuration;
uint32_t first;
@@ -62,6 +65,12 @@ Config Initiator
/* use n_gsm line discipline */
ioctl(fd, TIOCSETD, &ldisc);
+ /* get n_gsm extended configuration */
+ ioctl(fd, GSMIOC_GETCONF_EXT, &ce);
+ /* use keep-alive once every 5s for modem connection supervision */
+ ce.keep_alive = 500;
+ /* set the new extended configuration */
+ ioctl(fd, GSMIOC_SETCONF_EXT, &ce);
/* get n_gsm configuration */
ioctl(fd, GSMIOC_GETCONF, &c);
/* we are initiator and need encoding 0 (basic) */
@@ -106,6 +115,9 @@ Config Requester
#. Switch the serial line to using the *n_gsm* line discipline by using
``TIOCSETD`` ioctl.
+#. Configure the mux using ``GSMIOC_GETCONF_EXT``/``GSMIOC_SETCONF_EXT``
+ ioctl if needed.
+
#. Configure the mux using ``GSMIOC_GETCONF``/``GSMIOC_SETCONF`` ioctl.
#. Obtain base gsmtty number for the used serial port::
@@ -119,6 +131,7 @@ Config Requester
int ldisc = N_GSM0710;
struct gsm_config c;
+ struct gsm_config_ext ce;
struct termios configuration;
uint32_t first;
@@ -132,6 +145,12 @@ Config Requester
/* use n_gsm line discipline */
ioctl(fd, TIOCSETD, &ldisc);
+ /* get n_gsm extended configuration */
+ ioctl(fd, GSMIOC_GETCONF_EXT, &ce);
+ /* use keep-alive once every 5s for peer connection supervision */
+ ce.keep_alive = 500;
+ /* set the new extended configuration */
+ ioctl(fd, GSMIOC_SETCONF_EXT, &ce);
/* get n_gsm configuration */
ioctl(fd, GSMIOC_GETCONF, &c);
/* we are requester and need encoding 0 (basic) */
diff --git a/Documentation/fpga/dfl.rst b/Documentation/fpga/dfl.rst
index 15b670926084..80255e2dc3e6 100644
--- a/Documentation/fpga/dfl.rst
+++ b/Documentation/fpga/dfl.rst
@@ -75,6 +75,125 @@ convenient for software to locate each feature by walking through this list,
and can be implemented in register regions of any FPGA device.
+Device Feature Header - Version 0
+=================================
+Version 0 (DFHv0) is the original version of the Device Feature Header.
+All multi-byte quantities in DFHv0 are little-endian.
+The format of DFHv0 is shown below::
+
+ +-----------------------------------------------------------------------+
+ |63 Type 60|59 DFH VER 52|51 Rsvd 41|40 EOL|39 Next 16|15 REV 12|11 ID 0| 0x00
+ +-----------------------------------------------------------------------+
+ |63 GUID_L 0| 0x08
+ +-----------------------------------------------------------------------+
+ |63 GUID_H 0| 0x10
+ +-----------------------------------------------------------------------+
+
+- Offset 0x00
+
+ * Type - The type of DFH (e.g. FME, AFU, or private feature).
+ * DFH VER - The version of the DFH.
+ * Rsvd - Currently unused.
+ * EOL - Set if the DFH is the end of the Device Feature List (DFL).
+ * Next - The offset in bytes of the next DFH in the DFL from the DFH start,
+ and the start of a DFH must be aligned to an 8 byte boundary.
+ If EOL is set, Next is the size of MMIO of the last feature in the list.
+ * REV - The revision of the feature associated with this header.
+ * ID - The feature ID if Type is private feature.
+
+- Offset 0x08
+
+ * GUID_L - Least significant 64 bits of a 128-bit Globally Unique Identifier
+ (present only if Type is FME or AFU).
+
+- Offset 0x10
+
+ * GUID_H - Most significant 64 bits of a 128-bit Globally Unique Identifier
+ (present only if Type is FME or AFU).
+
+
+Device Feature Header - Version 1
+=================================
+Version 1 (DFHv1) of the Device Feature Header adds the following functionality:
+
+* Provides a standardized mechanism for features to describe
+ parameters/capabilities to software.
+* Standardize the use of a GUID for all DFHv1 types.
+* Decouples the DFH location from the register space of the feature itself.
+
+All multi-byte quantities in DFHv1 are little-endian.
+The format of Version 1 of the Device Feature Header (DFH) is shown below::
+
+ +-----------------------------------------------------------------------+
+ |63 Type 60|59 DFH VER 52|51 Rsvd 41|40 EOL|39 Next 16|15 REV 12|11 ID 0| 0x00
+ +-----------------------------------------------------------------------+
+ |63 GUID_L 0| 0x08
+ +-----------------------------------------------------------------------+
+ |63 GUID_H 0| 0x10
+ +-----------------------------------------------------------------------+
+ |63 Reg Address/Offset 1| Rel 0| 0x18
+ +-----------------------------------------------------------------------+
+ |63 Reg Size 32|Params 31|30 Group 16|15 Instance 0| 0x20
+ +-----------------------------------------------------------------------+
+ |63 Next 35|34RSV33|EOP32|31 Param Version 16|15 Param ID 0| 0x28
+ +-----------------------------------------------------------------------+
+ |63 Parameter Data 0| 0x30
+ +-----------------------------------------------------------------------+
+
+ ...
+
+ +-----------------------------------------------------------------------+
+ |63 Next 35|34RSV33|EOP32|31 Param Version 16|15 Param ID 0|
+ +-----------------------------------------------------------------------+
+ |63 Parameter Data 0|
+ +-----------------------------------------------------------------------+
+
+- Offset 0x00
+
+ * Type - The type of DFH (e.g. FME, AFU, or private feature).
+ * DFH VER - The version of the DFH.
+ * Rsvd - Currently unused.
+ * EOL - Set if the DFH is the end of the Device Feature List (DFL).
+ * Next - The offset in bytes of the next DFH in the DFL from the DFH start,
+ and the start of a DFH must be aligned to an 8 byte boundary.
+ If EOL is set, Next is the size of MMIO of the last feature in the list.
+ * REV - The revision of the feature associated with this header.
+ * ID - The feature ID if Type is private feature.
+
+- Offset 0x08
+
+ * GUID_L - Least significant 64 bits of a 128-bit Globally Unique Identifier.
+
+- Offset 0x10
+
+ * GUID_H - Most significant 64 bits of a 128-bit Globally Unique Identifier.
+
+- Offset 0x18
+
+ * Reg Address/Offset - If Rel bit is set, then the value is the high 63 bits
+ of a 16-bit aligned absolute address of the feature's registers. Otherwise
+ the value is the offset from the start of the DFH of the feature's registers.
+
+- Offset 0x20
+
+ * Reg Size - Size of feature's register set in bytes.
+ * Params - Set if DFH has a list of parameter blocks.
+ * Group - Id of group if feature is part of a group.
+ * Instance - Id of feature instance within a group.
+
+- Offset 0x28 if feature has parameters
+
+ * Next - Offset to the next parameter block in 8 byte words. If EOP set,
+ size in 8 byte words of last parameter.
+ * Param Version - Version of Param ID.
+ * Param ID - ID of parameter.
+
+- Offset 0x30
+
+ * Parameter Data - Parameter data whose size and format is defined by
+ version and ID of the parameter.
+
+
FIU - FME (FPGA Management Engine)
==================================
The FPGA Management Engine performs reconfiguration and other infrastructure