summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-04-02 00:23:53 +0400
committerLinus Torvalds <torvalds@linux-foundation.org>2014-04-02 00:23:53 +0400
commitc12ac9f98ec08d6eb69f84e3f72241d56a8b0822 (patch)
tree8c749a097e54a93e22b0a099c38d60135022a221 /Documentation
parent3786075b5ebc8c4eaefd9e3ebf72883934fb64b3 (diff)
parent45b15d98a96ffdb3c608bdad952f51930c151420 (diff)
downloadlinux-c12ac9f98ec08d6eb69f84e3f72241d56a8b0822.tar.xz
Merge tag 'spi-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi Updates from Mark Brown: "A busy release for both cleanups and new drivers this time along with further factoring out of replicated code into the core: - Provide support in the core for DMA mapping transfers - essentially all drivers weren't implementing this properly, now there's no excuse. - Dual and quad mode support for spidev. - Fix handling of cs_change in the generic implementation. - Remove the S3C_DMA code from the s3c64xx driver now that all the platforms using it have been converted to dmaengine. - Lots of improvements to the Renesas SPI controllers. - Drivers for Allwinner A10 and A31, Qualcomm QUP and Xylinx xtfpga. - Removal of the bitrotted ti-ssp driver" * tag 'spi-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (199 commits) spi: Fix handling of cs_change in core implementation spi: bitbang: Make spi_bitbang_stop() return void spi: mpc52xx: Convert to use bits_per_word_mask spi: omap-100k: Fix memory leak spi: dw: Don't call kfree for memory allocated by devm_kzalloc spi: fsl-dspi: Fix memory leak spi: omap-uwire: add missing iounmap spi: clps711x: Convert to use master->max_speed_hz spi: clps711x: Enable driver compilation with COMPILE_TEST spi: omap-uwire: Remove full duplex check spi: Do not require a completion spi: topcliff-pch: Transform noisy message to dev_vdbg spi: coldfire-qspi: Simplify the code to set register bits for transfer speed spi: bcm63xx: Remove unused define for PFX spi: efm32: use $vendor,$device scheme for compatible string spi: clps711x: Remove <mach/hardware.h> dependency spi: topcliff-pch: Properly unregister platform devices on probe() error paths spi: fsl-espi: Remove unused bits_per_word variable in fsl_espi_bufs spi: altera: Remove the code to get unused platform_data spi: fsl-lib: Fix memory leak of pinfo ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/spi/efm32-spi.txt8
-rw-r--r--Documentation/devicetree/bindings/spi/qcom,spi-qup.txt85
-rw-r--r--Documentation/devicetree/bindings/spi/sh-hspi.txt28
-rw-r--r--Documentation/devicetree/bindings/spi/sh-msiof.txt42
-rw-r--r--Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt2
-rw-r--r--Documentation/devicetree/bindings/spi/spi-rspi.txt61
-rw-r--r--Documentation/devicetree/bindings/spi/spi-sun4i.txt24
-rw-r--r--Documentation/devicetree/bindings/spi/spi-sun6i.txt24
-rw-r--r--Documentation/devicetree/bindings/spi/spi-xtensa-xtfpga.txt9
-rw-r--r--Documentation/spi/spidev6
-rw-r--r--Documentation/spi/spidev_fdx.c8
-rw-r--r--Documentation/spi/spidev_test.c45
12 files changed, 318 insertions, 24 deletions
diff --git a/Documentation/devicetree/bindings/spi/efm32-spi.txt b/Documentation/devicetree/bindings/spi/efm32-spi.txt
index a590ca51be75..8f081c96a4fa 100644
--- a/Documentation/devicetree/bindings/spi/efm32-spi.txt
+++ b/Documentation/devicetree/bindings/spi/efm32-spi.txt
@@ -3,24 +3,24 @@
Required properties:
- #address-cells: see spi-bus.txt
- #size-cells: see spi-bus.txt
-- compatible: should be "efm32,spi"
+- compatible: should be "energymicro,efm32-spi"
- reg: Offset and length of the register set for the controller
- interrupts: pair specifying rx and tx irq
- clocks: phandle to the spi clock
- cs-gpios: see spi-bus.txt
-- location: Value to write to the ROUTE register's LOCATION bitfield to configure the pinmux for the device, see datasheet for values.
+- efm32,location: Value to write to the ROUTE register's LOCATION bitfield to configure the pinmux for the device, see datasheet for values.
Example:
spi1: spi@0x4000c400 { /* USART1 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "efm32,spi";
+ compatible = "energymicro,efm32-spi";
reg = <0x4000c400 0x400>;
interrupts = <15 16>;
clocks = <&cmu 20>;
cs-gpios = <&gpio 51 1>; // D3
- location = <1>;
+ efm32,location = <1>;
status = "ok";
ks8851@0 {
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
new file mode 100644
index 000000000000..b82a268f1bd4
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
@@ -0,0 +1,85 @@
+Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
+
+The QUP core is an AHB slave that provides a common data path (an output FIFO
+and an input FIFO) for serial peripheral interface (SPI) mini-core.
+
+SPI in master mode supports up to 50MHz, up to four chip selects, programmable
+data path from 4 bits to 32 bits and numerous protocol variants.
+
+Required properties:
+- compatible: Should contain "qcom,spi-qup-v2.1.1" or "qcom,spi-qup-v2.2.1"
+- reg: Should contain base register location and length
+- interrupts: Interrupt number used by this controller
+
+- clocks: Should contain the core clock and the AHB clock.
+- clock-names: Should be "core" for the core clock and "iface" for the
+ AHB clock.
+
+- #address-cells: Number of cells required to define a chip select
+ address on the SPI bus. Should be set to 1.
+- #size-cells: Should be zero.
+
+Optional properties:
+- spi-max-frequency: Specifies maximum SPI clock frequency,
+ Units - Hz. Definition as per
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+
+SPI slave nodes must be children of the SPI master node and can contain
+properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+
+ spi_8: spi@f9964000 { /* BLSP2 QUP2 */
+
+ compatible = "qcom,spi-qup-v2";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xf9964000 0x1000>;
+ interrupts = <0 102 0>;
+ spi-max-frequency = <19200000>;
+
+ clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi8_default>;
+
+ device@0 {
+ compatible = "arm,pl022-dummy";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <19200000>;
+ spi-cpol;
+ };
+
+ device@1 {
+ compatible = "arm,pl022-dummy";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <1>; /* Chip select 1 */
+ spi-max-frequency = <9600000>;
+ spi-cpha;
+ };
+
+ device@2 {
+ compatible = "arm,pl022-dummy";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <2>; /* Chip select 2 */
+ spi-max-frequency = <19200000>;
+ spi-cpol;
+ spi-cpha;
+ };
+
+ device@3 {
+ compatible = "arm,pl022-dummy";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <3>; /* Chip select 3 */
+ spi-max-frequency = <19200000>;
+ spi-cpol;
+ spi-cpha;
+ spi-cs-high;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/spi/sh-hspi.txt b/Documentation/devicetree/bindings/spi/sh-hspi.txt
index 30b57b1c8a13..319bad4af875 100644
--- a/Documentation/devicetree/bindings/spi/sh-hspi.txt
+++ b/Documentation/devicetree/bindings/spi/sh-hspi.txt
@@ -1,7 +1,29 @@
Renesas HSPI.
Required properties:
-- compatible : "renesas,hspi"
-- reg : Offset and length of the register set for the device
-- interrupts : interrupt line used by HSPI
+- compatible : "renesas,hspi-<soctype>", "renesas,hspi" as fallback.
+ Examples with soctypes are:
+ - "renesas,hspi-r8a7778" (R-Car M1)
+ - "renesas,hspi-r8a7779" (R-Car H1)
+- reg : Offset and length of the register set for the device
+- interrupt-parent : The phandle for the interrupt controller that
+ services interrupts for this device
+- interrupts : Interrupt specifier
+- #address-cells : Must be <1>
+- #size-cells : Must be <0>
+
+Pinctrl properties might be needed, too. See
+Documentation/devicetree/bindings/pinctrl/renesas,*.
+
+Example:
+
+ hspi0: spi@fffc7000 {
+ compatible = "renesas,hspi-r8a7778", "renesas,hspi";
+ reg = <0xfffc7000 0x18>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt
index e6222106ca36..f24baf3b6cc1 100644
--- a/Documentation/devicetree/bindings/spi/sh-msiof.txt
+++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt
@@ -1,12 +1,40 @@
Renesas MSIOF spi controller
Required properties:
-- compatible : "renesas,sh-msiof" for SuperH or
- "renesas,sh-mobile-msiof" for SH Mobile series
-- reg : Offset and length of the register set for the device
-- interrupts : interrupt line used by MSIOF
+- compatible : "renesas,msiof-<soctype>" for SoCs,
+ "renesas,sh-msiof" for SuperH, or
+ "renesas,sh-mobile-msiof" for SH Mobile series.
+ Examples with soctypes are:
+ "renesas,msiof-r8a7790" (R-Car H2)
+ "renesas,msiof-r8a7791" (R-Car M2)
+- reg : Offset and length of the register set for the device
+- interrupt-parent : The phandle for the interrupt controller that
+ services interrupts for this device
+- interrupts : Interrupt specifier
+- #address-cells : Must be <1>
+- #size-cells : Must be <0>
Optional properties:
-- num-cs : total number of chip-selects
-- renesas,tx-fifo-size : Overrides the default tx fifo size given in words
-- renesas,rx-fifo-size : Overrides the default rx fifo size given in words
+- clocks : Must contain a reference to the functional clock.
+- num-cs : Total number of chip-selects (default is 1)
+
+Optional properties, deprecated for soctype-specific bindings:
+- renesas,tx-fifo-size : Overrides the default tx fifo size given in words
+ (default is 64)
+- renesas,rx-fifo-size : Overrides the default rx fifo size given in words
+ (default is 64, or 256 on R-Car H2 and M2)
+
+Pinctrl properties might be needed, too. See
+Documentation/devicetree/bindings/pinctrl/renesas,*.
+
+Example:
+
+ msiof0: spi@e6e20000 {
+ compatible = "renesas,msiof-r8a7791";
+ reg = <0 0xe6e20000 0 0x0064>;
+ interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
index a1fb3035a42b..5376de40f10b 100644
--- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
@@ -10,6 +10,7 @@ Required properties:
- pinctrl-names: must contain a "default" entry.
- spi-num-chipselects : the number of the chipselect signals.
- bus-num : the slave chip chipselect signal number.
+- big-endian : if DSPI modudle is big endian, the bool will be set in node.
Example:
dspi0@4002c000 {
@@ -24,6 +25,7 @@ dspi0@4002c000 {
bus-num = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dspi0_1>;
+ big-endian;
status = "okay";
sflash: at26df081a@0 {
diff --git a/Documentation/devicetree/bindings/spi/spi-rspi.txt b/Documentation/devicetree/bindings/spi/spi-rspi.txt
new file mode 100644
index 000000000000..d57d82a74054
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-rspi.txt
@@ -0,0 +1,61 @@
+Device tree configuration for Renesas RSPI/QSPI driver
+
+Required properties:
+- compatible : For Renesas Serial Peripheral Interface on legacy SH:
+ "renesas,rspi-<soctype>", "renesas,rspi" as fallback.
+ For Renesas Serial Peripheral Interface on RZ/A1H:
+ "renesas,rspi-<soctype>", "renesas,rspi-rz" as fallback.
+ For Quad Serial Peripheral Interface on R-Car Gen2:
+ "renesas,qspi-<soctype>", "renesas,qspi" as fallback.
+ Examples with soctypes are:
+ - "renesas,rspi-sh7757" (SH)
+ - "renesas,rspi-r7s72100" (RZ/A1H)
+ - "renesas,qspi-r8a7790" (R-Car H2)
+ - "renesas,qspi-r8a7791" (R-Car M2)
+- reg : Address start and address range size of the device
+- interrupts : A list of interrupt-specifiers, one for each entry in
+ interrupt-names.
+ If interrupt-names is not present, an interrupt specifier
+ for a single muxed interrupt.
+- interrupt-names : A list of interrupt names. Should contain (if present):
+ - "error" for SPEI,
+ - "rx" for SPRI,
+ - "tx" to SPTI,
+ - "mux" for a single muxed interrupt.
+- interrupt-parent : The phandle for the interrupt controller that
+ services interrupts for this device.
+- num-cs : Number of chip selects. Some RSPI cores have more than 1.
+- #address-cells : Must be <1>
+- #size-cells : Must be <0>
+
+Optional properties:
+- clocks : Must contain a reference to the functional clock.
+
+Pinctrl properties might be needed, too. See
+Documentation/devicetree/bindings/pinctrl/renesas,*.
+
+Examples:
+
+ spi0: spi@e800c800 {
+ compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+ reg = <0xe800c800 0x24>;
+ interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>,
+ <0 239 IRQ_TYPE_LEVEL_HIGH>,
+ <0 240 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error", "rx", "tx";
+ interrupt-parent = <&gic>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi: spi@e6b10000 {
+ compatible = "renesas,qspi-r8a7791", "renesas,qspi";
+ reg = <0 0xe6b10000 0 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/spi/spi-sun4i.txt b/Documentation/devicetree/bindings/spi/spi-sun4i.txt
new file mode 100644
index 000000000000..de827f5a301e
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-sun4i.txt
@@ -0,0 +1,24 @@
+Allwinner A10 SPI controller
+
+Required properties:
+- compatible: Should be "allwinner,sun4-a10-spi".
+- reg: Should contain register location and length.
+- interrupts: Should contain interrupt.
+- clocks: phandle to the clocks feeding the SPI controller. Two are
+ needed:
+ - "ahb": the gated AHB parent clock
+ - "mod": the parent module clock
+- clock-names: Must contain the clock names described just above
+
+Example:
+
+spi1: spi@01c06000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c06000 0x1000>;
+ interrupts = <11>;
+ clocks = <&ahb_gates 21>, <&spi1_clk>;
+ clock-names = "ahb", "mod";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-sun6i.txt b/Documentation/devicetree/bindings/spi/spi-sun6i.txt
new file mode 100644
index 000000000000..21de73db6a05
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-sun6i.txt
@@ -0,0 +1,24 @@
+Allwinner A31 SPI controller
+
+Required properties:
+- compatible: Should be "allwinner,sun6i-a31-spi".
+- reg: Should contain register location and length.
+- interrupts: Should contain interrupt.
+- clocks: phandle to the clocks feeding the SPI controller. Two are
+ needed:
+ - "ahb": the gated AHB parent clock
+ - "mod": the parent module clock
+- clock-names: Must contain the clock names described just above
+- resets: phandle to the reset controller asserting this device in
+ reset
+
+Example:
+
+spi1: spi@01c69000 {
+ compatible = "allwinner,sun6i-a31-spi";
+ reg = <0x01c69000 0x1000>;
+ interrupts = <0 66 4>;
+ clocks = <&ahb1_gates 21>, <&spi1_clk>;
+ clock-names = "ahb", "mod";
+ resets = <&ahb1_rst 21>;
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-xtensa-xtfpga.txt b/Documentation/devicetree/bindings/spi/spi-xtensa-xtfpga.txt
new file mode 100644
index 000000000000..b6ebe2bc7041
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-xtensa-xtfpga.txt
@@ -0,0 +1,9 @@
+Cadence Xtensa XTFPGA platform SPI controller.
+
+This simple SPI master controller is built into xtfpga bitstreams and is used
+to control daughterboard audio codec.
+
+Required properties:
+- compatible: should be "cdns,xtfpga-spi".
+- reg: physical base address of the controller and length of memory mapped
+ region.
diff --git a/Documentation/spi/spidev b/Documentation/spi/spidev
index ed2da5e5b28a..3d14035b1766 100644
--- a/Documentation/spi/spidev
+++ b/Documentation/spi/spidev
@@ -85,6 +85,12 @@ settings for data transfer parameters:
SPI_MODE_0..SPI_MODE_3; or if you prefer you can combine SPI_CPOL
(clock polarity, idle high iff this is set) or SPI_CPHA (clock phase,
sample on trailing edge iff this is set) flags.
+ Note that this request is limited to SPI mode flags that fit in a
+ single byte.
+
+ SPI_IOC_RD_MODE32, SPI_IOC_WR_MODE32 ... pass a pointer to a uin32_t
+ which will return (RD) or assign (WR) the full SPI transfer mode,
+ not limited to the bits that fit in one byte.
SPI_IOC_RD_LSB_FIRST, SPI_IOC_WR_LSB_FIRST ... pass a pointer to a byte
which will return (RD) or assign (WR) the bit justification used to
diff --git a/Documentation/spi/spidev_fdx.c b/Documentation/spi/spidev_fdx.c
index 36ec0774ca0b..0ea3e51292fc 100644
--- a/Documentation/spi/spidev_fdx.c
+++ b/Documentation/spi/spidev_fdx.c
@@ -78,10 +78,10 @@ static void do_msg(int fd, int len)
static void dumpstat(const char *name, int fd)
{
- __u8 mode, lsb, bits;
- __u32 speed;
+ __u8 lsb, bits;
+ __u32 mode, speed;
- if (ioctl(fd, SPI_IOC_RD_MODE, &mode) < 0) {
+ if (ioctl(fd, SPI_IOC_RD_MODE32, &mode) < 0) {
perror("SPI rd_mode");
return;
}
@@ -98,7 +98,7 @@ static void dumpstat(const char *name, int fd)
return;
}
- printf("%s: spi mode %d, %d bits %sper word, %d Hz max\n",
+ printf("%s: spi mode 0x%x, %d bits %sper word, %d Hz max\n",
name, mode, bits, lsb ? "(lsb first) " : "", speed);
}
diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c
index 16feda901469..3a2f9d59edab 100644
--- a/Documentation/spi/spidev_test.c
+++ b/Documentation/spi/spidev_test.c
@@ -30,7 +30,7 @@ static void pabort(const char *s)
}
static const char *device = "/dev/spidev1.1";
-static uint8_t mode;
+static uint32_t mode;
static uint8_t bits = 8;
static uint32_t speed = 500000;
static uint16_t delay;
@@ -57,6 +57,21 @@ static void transfer(int fd)
.bits_per_word = bits,
};
+ if (mode & SPI_TX_QUAD)
+ tr.tx_nbits = 4;
+ else if (mode & SPI_TX_DUAL)
+ tr.tx_nbits = 2;
+ if (mode & SPI_RX_QUAD)
+ tr.rx_nbits = 4;
+ else if (mode & SPI_RX_DUAL)
+ tr.rx_nbits = 2;
+ if (!(mode & SPI_LOOP)) {
+ if (mode & (SPI_TX_QUAD | SPI_TX_DUAL))
+ tr.rx_buf = 0;
+ else if (mode & (SPI_RX_QUAD | SPI_RX_DUAL))
+ tr.tx_buf = 0;
+ }
+
ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr);
if (ret < 1)
pabort("can't send spi message");
@@ -81,7 +96,11 @@ static void print_usage(const char *prog)
" -O --cpol clock polarity\n"
" -L --lsb least significant bit first\n"
" -C --cs-high chip select active high\n"
- " -3 --3wire SI/SO signals shared\n");
+ " -3 --3wire SI/SO signals shared\n"
+ " -N --no-cs no chip select\n"
+ " -R --ready slave pulls low to pause\n"
+ " -2 --dual dual transfer\n"
+ " -4 --quad quad transfer\n");
exit(1);
}
@@ -101,11 +120,13 @@ static void parse_opts(int argc, char *argv[])
{ "3wire", 0, 0, '3' },
{ "no-cs", 0, 0, 'N' },
{ "ready", 0, 0, 'R' },
+ { "dual", 0, 0, '2' },
+ { "quad", 0, 0, '4' },
{ NULL, 0, 0, 0 },
};
int c;
- c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR", lopts, NULL);
+ c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR24", lopts, NULL);
if (c == -1)
break;
@@ -147,11 +168,23 @@ static void parse_opts(int argc, char *argv[])
case 'R':
mode |= SPI_READY;
break;
+ case '2':
+ mode |= SPI_TX_DUAL;
+ break;
+ case '4':
+ mode |= SPI_TX_QUAD;
+ break;
default:
print_usage(argv[0]);
break;
}
}
+ if (mode & SPI_LOOP) {
+ if (mode & SPI_TX_DUAL)
+ mode |= SPI_RX_DUAL;
+ if (mode & SPI_TX_QUAD)
+ mode |= SPI_RX_QUAD;
+ }
}
int main(int argc, char *argv[])
@@ -168,11 +201,11 @@ int main(int argc, char *argv[])
/*
* spi mode
*/
- ret = ioctl(fd, SPI_IOC_WR_MODE, &mode);
+ ret = ioctl(fd, SPI_IOC_WR_MODE32, &mode);
if (ret == -1)
pabort("can't set spi mode");
- ret = ioctl(fd, SPI_IOC_RD_MODE, &mode);
+ ret = ioctl(fd, SPI_IOC_RD_MODE32, &mode);
if (ret == -1)
pabort("can't get spi mode");
@@ -198,7 +231,7 @@ int main(int argc, char *argv[])
if (ret == -1)
pabort("can't get max speed hz");
- printf("spi mode: %d\n", mode);
+ printf("spi mode: 0x%x\n", mode);
printf("bits per word: %d\n", bits);
printf("max speed: %d Hz (%d KHz)\n", speed, speed/1000);