summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-08-09 22:52:28 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2020-08-09 22:52:28 +0300
commit9420f1ce01869409d78901c3e036b2c437cbc6b8 (patch)
treece371cca5922398c811f6a8072aed10343c2594d /Documentation
parentdec1fbbc1d7c46aed9fc1d3ee1f7f4fc04d6ed51 (diff)
parent7ee193e2dda3f48b692fad46ab9df90e99e7b811 (diff)
downloadlinux-9420f1ce01869409d78901c3e036b2c437cbc6b8.tar.xz
Merge tag 'pinctrl-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij: "This is the bulk of the pin control changes for the v5.9 kernel series: Core changes: - The GPIO patch "gpiolib: Introduce for_each_requested_gpio_in_range() macro" was put in an immutable branch and merged into the pinctrl tree as well. We see these changes also here. - Improved debug output for pins used as GPIO. New drivers: - Ocelot Sparx5 SoC driver. - Intel Emmitsburg SoC subdriver. - Intel Tiger Lake-H SoC subdriver. - Qualcomm PM660 SoC subdriver. - Renesas SH-PFC R8A774E1 subdriver. Driver improvements: - Linear improvement and cleanups of the Intel drivers for Cherryview, Lynxpoint, Baytrail etc. Improved locking among other things. - Renesas SH-PFC has added support for RPC pins, groups, and functions to r8a77970 and r8a77980. - The newere Freescale (now NXP) i.MX8 pin controllers have been modularized. This is driven by the Google Android GKI initiative I think. - Open drain support for pins on the Qualcomm IPQ4019. - The Ingenic driver can handle both edges IRQ detection. - A big slew of documentation fixes all over the place. - A few irqchip template conversions by yours truly. * tag 'pinctrl-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits) dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC pinctrl: stmfx: Use irqchip template pinctrl: amd: Use irqchip template pinctrl: mediatek: fix build for tristate changes pinctrl: samsung: Use bank name as irqchip name pinctrl: core: print gpio in pins debugfs file pinctrl: mediatek: add mt6779 eint support pinctrl: mediatek: add pinctrl support for MT6779 SoC pinctrl: mediatek: avoid virtual gpio trying to set reg pinctrl: mediatek: update pinmux definitions for mt6779 pinctrl: stm32: use the hwspin_lock_timeout_in_atomic() API pinctrl: mcp23s08: Use irqchip template pinctrl: sx150x: Use irqchip template dt-bindings: ingenic,pinctrl: Support pinmux/pinconf nodes pinctrl: intel: Add Intel Emmitsburg pin controller support pinctl: ti: iodelay: Replace HTTP links with HTTPS ones Revert "gpio: omap: handle pin config bias flags" pinctrl: single: Use fallthrough pseudo-keyword pinctrl: qcom: spmi-gpio: Use fallthrough pseudo-keyword pinctrl: baytrail: Use fallthrough pseudo-keyword ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt81
-rw-r--r--Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml176
-rw-r--r--Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml202
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt3
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt2
-rw-r--r--Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt1
-rw-r--r--Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt87
-rw-r--r--Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml100
8 files changed, 483 insertions, 169 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
deleted file mode 100644
index d9b2100c98e8..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-Ingenic XBurst pin controller
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-For the XBurst SoCs, pin control is tightly bound with GPIO ports. All pins may
-be used as GPIOs, multiplexed device functions are configured within the
-GPIO port configuration registers and it is typical to refer to pins using the
-naming scheme "PxN" where x is a character identifying the GPIO port with
-which the pin is associated and N is an integer from 0 to 31 identifying the
-pin within that GPIO port. For example PA0 is the first pin in GPIO port A, and
-PB31 is the last pin in GPIO port B. The jz4740, the x1000 and the x1830
-contains 4 GPIO ports, PA to PD, for a total of 128 pins. The jz4760, the
-jz4770 and the jz4780 contains 6 GPIO ports, PA to PF, for a total of 192 pins.
-
-
-Required properties:
---------------------
-
- - compatible: One of:
- - "ingenic,jz4740-pinctrl"
- - "ingenic,jz4725b-pinctrl"
- - "ingenic,jz4760-pinctrl"
- - "ingenic,jz4760b-pinctrl"
- - "ingenic,jz4770-pinctrl"
- - "ingenic,jz4780-pinctrl"
- - "ingenic,x1000-pinctrl"
- - "ingenic,x1000e-pinctrl"
- - "ingenic,x1500-pinctrl"
- - "ingenic,x1830-pinctrl"
- - reg: Address range of the pinctrl registers.
-
-
-Required properties for sub-nodes (GPIO chips):
------------------------------------------------
-
- - compatible: Must contain one of:
- - "ingenic,jz4740-gpio"
- - "ingenic,jz4760-gpio"
- - "ingenic,jz4770-gpio"
- - "ingenic,jz4780-gpio"
- - "ingenic,x1000-gpio"
- - "ingenic,x1830-gpio"
- - reg: The GPIO bank number.
- - interrupt-controller: Marks the device node as an interrupt controller.
- - interrupts: Interrupt specifier for the controllers interrupt.
- - #interrupt-cells: Should be 2. Refer to
- ../interrupt-controller/interrupts.txt for more details.
- - gpio-controller: Marks the device node as a GPIO controller.
- - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
- cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
- GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
- - gpio-ranges: Range of pins managed by the GPIO controller. Refer to
- ../gpio/gpio.txt for more details.
-
-
-Example:
---------
-
-pinctrl: pin-controller@10010000 {
- compatible = "ingenic,jz4740-pinctrl";
- reg = <0x10010000 0x400>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- gpa: gpio@0 {
- compatible = "ingenic,jz4740-gpio";
- reg = <0>;
-
- gpio-controller;
- gpio-ranges = <&pinctrl 0 0 32>;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
-
- interrupt-parent = <&intc>;
- interrupts = <28>;
- };
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
new file mode 100644
index 000000000000..18163fb69ce7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ingenic,pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs pin controller devicetree bindings
+
+description: >
+ Please refer to pinctrl-bindings.txt in this directory for details of the
+ common pinctrl bindings used by client devices, including the meaning of the
+ phrase "pin configuration node".
+
+ For the Ingenic SoCs, pin control is tightly bound with GPIO ports. All pins
+ may be used as GPIOs, multiplexed device functions are configured within the
+ GPIO port configuration registers and it is typical to refer to pins using the
+ naming scheme "PxN" where x is a character identifying the GPIO port with
+ which the pin is associated and N is an integer from 0 to 31 identifying the
+ pin within that GPIO port. For example PA0 is the first pin in GPIO port A,
+ and PB31 is the last pin in GPIO port B. The JZ4740, the X1000 and the X1830
+ contains 4 GPIO ports, PA to PD, for a total of 128 pins. The JZ4760, the
+ JZ4770 and the JZ4780 contains 6 GPIO ports, PA to PF, for a total of 192
+ pins.
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+ nodename:
+ pattern: "^pinctrl@[0-9a-f]+$"
+
+ compatible:
+ oneOf:
+ - enum:
+ - ingenic,jz4740-pinctrl
+ - ingenic,jz4725b-pinctrl
+ - ingenic,jz4760-pinctrl
+ - ingenic,jz4770-pinctrl
+ - ingenic,jz4780-pinctrl
+ - ingenic,x1000-pinctrl
+ - ingenic,x1500-pinctrl
+ - ingenic,x1830-pinctrl
+ - items:
+ - const: ingenic,jz4760b-pinctrl
+ - const: ingenic,jz4760-pinctrl
+ - items:
+ - const: ingenic,x1000e-pinctrl
+ - const: ingenic,x1000-pinctrl
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^gpio@[0-9]$":
+ type: object
+ properties:
+ compatible:
+ enum:
+ - ingenic,jz4740-gpio
+ - ingenic,jz4725b-gpio
+ - ingenic,jz4760-gpio
+ - ingenic,jz4770-gpio
+ - ingenic,jz4780-gpio
+ - ingenic,x1000-gpio
+ - ingenic,x1500-gpio
+ - ingenic,x1830-gpio
+
+ reg:
+ items:
+ - description: The GPIO bank number
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+ description:
+ Refer to ../interrupt-controller/interrupts.txt for more details.
+
+ interrupts:
+ maxItems: 1
+
+ required:
+ - compatible
+ - reg
+ - gpio-controller
+ - "#gpio-cells"
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties:
+ anyOf:
+ - type: object
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ properties:
+ phandle: true
+ function: true
+ groups: true
+ pins: true
+ bias-disable: true
+ bias-pull-up: true
+ bias-pull-down: true
+ output-low: true
+ output-high: true
+ additionalProperties: false
+
+ - type: object
+ properties:
+ phandle: true
+ additionalProperties:
+ type: object
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ properties:
+ phandle: true
+ function: true
+ groups: true
+ pins: true
+ bias-disable: true
+ bias-pull-up: true
+ bias-pull-down: true
+ output-low: true
+ output-high: true
+ additionalProperties: false
+
+examples:
+ - |
+ pin-controller@10010000 {
+ compatible = "ingenic,jz4770-pinctrl";
+ reg = <0x10010000 0x600>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio@0 {
+ compatible = "ingenic,jz4770-gpio";
+ reg = <0>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
new file mode 100644
index 000000000000..152c151c27ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
@@ -0,0 +1,202 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6779-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6779 Pin Controller Device Tree Bindings
+
+maintainers:
+ - Andy Teng <andy.teng@mediatek.com>
+
+description: |+
+ The pin controller node should be the child of a syscon node with the
+ required property:
+ - compatible: "syscon"
+
+properties:
+ compatible:
+ const: mediatek,mt6779-pinctrl
+
+ reg:
+ minItems: 9
+ maxItems: 9
+
+ reg-names:
+ items:
+ - const: "gpio"
+ - const: "iocfg_rm"
+ - const: "iocfg_br"
+ - const: "iocfg_lm"
+ - const: "iocfg_lb"
+ - const: "iocfg_rt"
+ - const: "iocfg_lt"
+ - const: "iocfg_tl"
+ - const: "eint"
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+ description: |
+ Number of cells in GPIO specifier. Since the generic GPIO
+ binding is used, the amount of cells must be specified as 2. See the below
+ mentioned gpio binding representation for description of particular cells.
+
+ gpio-ranges:
+ minItems: 1
+ maxItems: 5
+ description: |
+ GPIO valid number range.
+
+ interrupt-controller: true
+
+ interrupts:
+ maxItems: 1
+ description: |
+ Specifies the summary IRQ.
+
+ "#interrupt-cells":
+ const: 2
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - gpio-controller
+ - "#gpio-cells"
+ - gpio-ranges
+ - interrupt-controller
+ - interrupts
+ - "#interrupt-cells"
+
+patternProperties:
+ '-[0-9]*$':
+ type: object
+ patternProperties:
+ '-pins*$':
+ type: object
+ description: |
+ A pinctrl node should contain at least one subnodes representing the
+ pinctrl groups available on the machine. Each subnode will list the
+ pins it needs, and how they should be configured, with regard to muxer
+ configuration, pullups, drive strength, input enable/disable and input schmitt.
+ $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+ properties:
+ pinmux:
+ description:
+ integer array, represents gpio pin number and mux setting.
+ Supported pin number and mux varies for different SoCs, and are defined
+ as macros in boot/dts/<soc>-pinfunc.h directly.
+
+ bias-disable: true
+
+ bias-pull-up: true
+
+ bias-pull-down: true
+
+ input-enable: true
+
+ input-disable: true
+
+ output-low: true
+
+ output-high: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ mediatek,pull-up-adv:
+ description: |
+ Pull up setings for 2 pull resistors, R0 and R1. User can
+ configure those special pins. Valid arguments are described as below:
+ 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+ 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+ 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+ 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ mediatek,pull-down-adv:
+ description: |
+ Pull down settings for 2 pull resistors, R0 and R1. User can
+ configure those special pins. Valid arguments are described as below:
+ 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+ 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+ 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+ 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ required:
+ - pinmux
+
+ additionalProperties: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/pinctrl/mt6779-pinfunc.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pio: pinctrl@10005000 {
+ compatible = "mediatek,mt6779-pinctrl";
+ reg = <0 0x10005000 0 0x1000>,
+ <0 0x11c20000 0 0x1000>,
+ <0 0x11d10000 0 0x1000>,
+ <0 0x11e20000 0 0x1000>,
+ <0 0x11e70000 0 0x1000>,
+ <0 0x11ea0000 0 0x1000>,
+ <0 0x11f20000 0 0x1000>,
+ <0 0x11f30000 0 0x1000>,
+ <0 0x1000b000 0 0x1000>;
+ reg-names = "gpio", "iocfg_rm",
+ "iocfg_br", "iocfg_lm",
+ "iocfg_lb", "iocfg_rt",
+ "iocfg_lt", "iocfg_tl",
+ "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 210>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+
+ mmc0_pins_default: mmc0-0 {
+ cmd-dat-pins {
+ pinmux = <PINMUX_GPIO168__FUNC_MSDC0_DAT0>,
+ <PINMUX_GPIO172__FUNC_MSDC0_DAT1>,
+ <PINMUX_GPIO169__FUNC_MSDC0_DAT2>,
+ <PINMUX_GPIO177__FUNC_MSDC0_DAT3>,
+ <PINMUX_GPIO170__FUNC_MSDC0_DAT4>,
+ <PINMUX_GPIO173__FUNC_MSDC0_DAT5>,
+ <PINMUX_GPIO171__FUNC_MSDC0_DAT6>,
+ <PINMUX_GPIO174__FUNC_MSDC0_DAT7>,
+ <PINMUX_GPIO167__FUNC_MSDC0_CMD>;
+ input-enable;
+ mediatek,pull-up-adv = <1>;
+ };
+ clk-pins {
+ pinmux = <PINMUX_GPIO176__FUNC_MSDC0_CLK>;
+ mediatek,pull-down-adv = <2>;
+ };
+ rst-pins {
+ pinmux = <PINMUX_GPIO178__FUNC_MSDC0_RSTB>;
+ mediatek,pull-up-adv = <0>;
+ };
+ };
+ };
+
+ mmc0 {
+ pinctrl-0 = <&mmc0_pins_default>;
+ pinctrl-names = "default";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
index 84be0f2c6f3b..0861afeccfc9 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
@@ -44,7 +44,8 @@ information about e.g. the mux function.
The following generic properties as defined in pinctrl-bindings.txt are valid
to specify in a pin configuration subnode:
- pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength.
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-open-drain,
+ drive-strength.
Non-empty subnodes must specify the 'pins' property.
Note that not all properties are valid for all pins.
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
index 7be5de8d253f..c3d1914381ae 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
@@ -23,6 +23,8 @@ PMIC's from Qualcomm.
"qcom,pmi8994-gpio"
"qcom,pmi8998-gpio"
"qcom,pms405-gpio"
+ "qcom,pm660-gpio"
+ "qcom,pm660l-gpio"
"qcom,pm8150-gpio"
"qcom,pm8150b-gpio"
"qcom,pm6150-gpio"
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
index 1b8e8b4a6379..d75476e24514 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
@@ -21,6 +21,7 @@ Required Properties:
- "renesas,pfc-r8a774a1": for R8A774A1 (RZ/G2M) compatible pin-controller.
- "renesas,pfc-r8a774b1": for R8A774B1 (RZ/G2N) compatible pin-controller.
- "renesas,pfc-r8a774c0": for R8A774C0 (RZ/G2E) compatible pin-controller.
+ - "renesas,pfc-r8a774e1": for R8A774E1 (RZ/G2H) compatible pin-controller.
- "renesas,pfc-r8a7778": for R8A7778 (R-Car M1) compatible pin-controller.
- "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller.
- "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller.
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt
deleted file mode 100644
index a63ccd476cda..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-Renesas RZ/A2 combined Pin and GPIO controller
-
-The Renesas SoCs of the RZ/A2 series feature a combined Pin and GPIO controller.
-Pin multiplexing and GPIO configuration is performed on a per-pin basis.
-Each port features up to 8 pins, each of them configurable for GPIO
-function (port mode) or in alternate function mode.
-Up to 8 different alternate function modes exist for each single pin.
-
-Pin controller node
--------------------
-
-Required properties:
- - compatible: shall be:
- - "renesas,r7s9210-pinctrl": for RZ/A2M
- - reg
- Address base and length of the memory area where the pin controller
- hardware is mapped to.
- - gpio-controller
- This pin controller also controls pins as GPIO
- - #gpio-cells
- Must be 2
- - gpio-ranges
- Expresses the total number of GPIO ports/pins in this SoC
-
-Example: Pin controller node for RZ/A2M SoC (r7s9210)
-
- pinctrl: pin-controller@fcffe000 {
- compatible = "renesas,r7s9210-pinctrl";
- reg = <0xfcffe000 0x1000>;
-
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pinctrl 0 0 176>;
- };
-
-Sub-nodes
----------
-
-The child nodes of the pin controller designate pins to be used for
-specific peripheral functions or as GPIO.
-
-- Pin multiplexing sub-nodes:
- A pin multiplexing sub-node describes how to configure a set of
- (or a single) pin in some desired alternate function mode.
- The values for the pinmux properties are a combination of port name, pin
- number and the desired function index. Use the RZA2_PINMUX macro located
- in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily define these.
- For assigning GPIO pins, use the macro RZA2_PIN also in r7s9210-pinctrl.h
- to express the desired port pin.
-
- Required properties:
- - pinmux:
- integer array representing pin number and pin multiplexing configuration.
- When a pin has to be configured in alternate function mode, use this
- property to identify the pin by its global index, and provide its
- alternate function configuration number along with it.
- When multiple pins are required to be configured as part of the same
- alternate function they shall be specified as members of the same
- argument list of a single "pinmux" property.
- Helper macros to ease assembling the pin index from its position
- (port where it sits on and pin number) and alternate function identifier
- are provided by the pin controller header file at:
- <dt-bindings/pinctrl/r7s9210-pinctrl.h>
- Integers values in "pinmux" argument list are assembled as:
- ((PORT * 8 + PIN) | MUX_FUNC << 16)
-
- Example: Board specific pins configuration
-
- &pinctrl {
- /* Serial Console */
- scif4_pins: serial4 {
- pinmux = <RZA2_PINMUX(PORT9, 0, 4)>, /* TxD4 */
- <RZA2_PINMUX(PORT9, 1, 4)>; /* RxD4 */
- };
- };
-
- Example: Assigning a GPIO:
-
- leds {
- status = "okay";
- compatible = "gpio-leds";
-
- led0 {
- /* P6_0 */
- gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>;
- };
- };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
new file mode 100644
index 000000000000..b7911a994f3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rza2-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/A2 combined Pin and GPIO controller
+
+maintainers:
+ - Chris Brandt <chris.brandt@renesas.com>
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+ The Renesas SoCs of the RZ/A2 series feature a combined Pin and GPIO
+ controller.
+ Pin multiplexing and GPIO configuration is performed on a per-pin basis.
+ Each port features up to 8 pins, each of them configurable for GPIO function
+ (port mode) or in alternate function mode.
+ Up to 8 different alternate function modes exist for each single pin.
+
+properties:
+ compatible:
+ const: "renesas,r7s9210-pinctrl" # RZ/A2M
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+ description:
+ The first cell contains the global GPIO port index, constructed using the
+ RZA2_PIN() helper macro in r7s9210-pinctrl.h.
+ E.g. "RZA2_PIN(PORT6, 0)" for P6_0.
+
+ gpio-ranges:
+ maxItems: 1
+
+patternProperties:
+ "^.*$":
+ if:
+ type: object
+ then:
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+ description:
+ The child nodes of the pin controller designate pins to be used for
+ specific peripheral functions or as GPIO.
+
+ A pin multiplexing sub-node describes how to configure a set of
+ (or a single) pin in some desired alternate function mode.
+ The values for the pinmux properties are a combination of port name,
+ pin number and the desired function index. Use the RZA2_PINMUX macro
+ located in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily
+ define these.
+ For assigning GPIO pins, use the macro RZA2_PIN also in
+ to express the desired port pin.
+
+ properties:
+ phandle: true
+
+ pinmux:
+ description:
+ Values are constructed from GPIO port number, pin number, and
+ alternate function configuration number using the RZA2_PINMUX()
+ helper macro in r7s9210-pinctrl.h.
+
+ required:
+ - pinmux
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/r7s9210-pinctrl.h>
+ pinctrl: pin-controller@fcffe000 {
+ compatible = "renesas,r7s9210-pinctrl";
+ reg = <0xfcffe000 0x1000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 176>;
+
+ /* Serial Console */
+ scif4_pins: serial4 {
+ pinmux = <RZA2_PINMUX(PORT9, 0, 4)>, /* TxD4 */
+ <RZA2_PINMUX(PORT9, 1, 4)>; /* RxD4 */
+ };
+ };