summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-10-22 22:41:00 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2020-10-22 22:41:00 +0300
commit00937f36b09e89c74e4a059dbb8acbf4b971d5eb (patch)
treeff2e5f5fa6736460437f57680405a20124d1e969 /Documentation
parent96485e4462604744d66bf4301557d996d80b85eb (diff)
parent28e34e751f6c50098d9bcecb30c97634b6126730 (diff)
downloadlinux-00937f36b09e89c74e4a059dbb8acbf4b971d5eb.tar.xz
Merge tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas: "Enumeration: - Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong Liu) - Add schedule point in pci_read_config() to reduce max latency (Jiang Biao) - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan) Resource management: - Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo Pieralisi) PCIe native device hotplug: - Reduce noisiness on hot removal (Lukas Wunner) Power management: - Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds" that was done on the basis of spec typo (Bjorn Helgaas) - Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold ambiguity (Krzysztof Wilczyński) - Remove unused pcibios_pm_ops (Vaibhav Gupta) IOMMU: - Enable Translation Blocking for external devices to harden against DMA attacks (Rajat Jain) Error handling: - Add an ACPI APEI notifier chain for vendor CPER records to enable device-specific error handling (Shiju Jose) ASPM: - Remove struct aspm_register_info to simplify code (Saheed O. Bolarinwa) Amlogic Meson PCIe controller driver: - Build as module by default (Kevin Hilman) Ampere Altra PCIe controller driver: - Add MCFG quirk to work around non-standard ECAM implementation (Tuan Phan) Broadcom iProc PCIe controller driver: - Set affinity mask on MSI interrupts (Mark Tomlinson) Broadcom STB PCIe controller driver: - Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan) - Add DT bindings for more Brcmstb chips (Jim Quinlan) - Add bcm7278 register info (Jim Quinlan) - Add bcm7278 PERST# support (Jim Quinlan) - Add suspend and resume pm_ops (Jim Quinlan) - Add control of rescal reset (Jim Quinlan) - Set additional internal memory DMA viewport sizes (Jim Quinlan) - Accommodate MSI for older chips (Jim Quinlan) - Set bus max burst size by chip type (Jim Quinlan) - Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Use dev_err_probe() to reduce redundant messages (Anson Huang) Freescale Layerscape PCIe controller driver: - Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang) - Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint support for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint test support for lS1088a (Xiaowei Bao) - Add MSI-X support for ls1088a (Xiaowei Bao) HiSilicon HIP PCIe controller driver: - Handle HIP-specific errors via ACPI APEI (Yicong Yang) HiSilicon Kirin PCIe controller driver: - Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo) Intel VMD host bridge driver: - Factor out physical offset, bus offset, IRQ domain, IRQ allocation (Jon Derrick) - Use generic PCI PM correctly (Jon Derrick) Marvell Aardvark PCIe controller driver: - Fix compilation on s390 (Pali Rohár) - Implement driver 'remove' function and allow to build it as module (Pali Rohár) - Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár) - Convert mvebu a3700 internal SMCC firmware return codes to errno (Pali Rohár) - Fix initialization with old Marvell's Arm Trusted Firmware (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix hibernation in case interrupts are not re-created (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Stop checking return value of debugfs_create() functions (Greg Kroah-Hartman) - Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin) Qualcomm PCIe controller driver: - Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith) Renesas R-Car PCIe controller driver: - Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints (Lad Prabhakar) - Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar) - Add DT support for r8a7742 (Lad Prabhakar) Socionext UniPhier Pro5 controller driver: - Add DT descriptions of iATU register (host and endpoint) (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems unavoidable) (Hou Zhiqiang) - Fix endpoint Header Type check so multi-function devices work (Hou Zhiqiang) - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang) - Stop leaking MSI page in suspend/resume (Jisheng Zhang) - Add common iATU register support instead of keystone-specific code (Kunihiko Hayashi) - Major config space access and other cleanups in dwc core and drivers that use it (al, exynos, histb, imx6, intel-gw, keystone, kirin, meson, qcom, tegra) (Rob Herring) - Add multiple PFs support for endpoint (Xiaowei Bao) - Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao) Miscellaneous: - Use fallthrough pseudo-keyword (Gustavo A. R. Silva) - Fix "0 used as NULL pointer" warnings (Gustavo Pimentel) - Fix "cast truncates bits from constant value" warnings (Gustavo Pimentel) - Remove redundant zeroing for sg_init_table() (Julia Lawall) - Use scnprintf(), not snprintf(), in sysfs "show" functions (Krzysztof Wilczyński) - Remove unused assignments (Krzysztof Wilczyński) - Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński) - Simplify bool comparisons (Krzysztof Wilczyński) - Use for_each_child_of_node() and for_each_node_by_name() (Qinglang Miao) - Simplify return expressions (Qinglang Miao)" * tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits) PCI: vmd: Update VMD PM to correctly use generic PCI PM PCI: vmd: Create IRQ allocation helper PCI: vmd: Create IRQ Domain configuration helper PCI: vmd: Create bus offset configuration helper PCI: vmd: Create physical offset helper PCI: v3-semi: Remove unneeded break PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus() PCI/ASPM: Remove struct pcie_link_state.l1ss PCI/ASPM: Remove struct aspm_register_info.l1ss_cap PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1 PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused) PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr PCI/ASPM: Remove struct aspm_register_info.latency_encoding PCI/ASPM: Remove struct aspm_register_info.enabled PCI/ASPM: Remove struct aspm_register_info.support PCI/ASPM: Use 'parent' and 'child' for readability PCI/ASPM: Move LTR path check to where it's used PCI/ASPM: Move pci_clear_and_set_dword() earlier PCI: dwc: Fix MSI page leakage in suspend/resume ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml56
-rw-r--r--Documentation/devicetree/bindings/pci/layerscape-pci.txt2
-rw-r--r--Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml8
-rw-r--r--Documentation/devicetree/bindings/pci/rcar-pci.txt3
-rw-r--r--Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml20
-rw-r--r--Documentation/devicetree/bindings/pci/uniphier-pcie.txt1
-rw-r--r--Documentation/power/pci.rst2
7 files changed, 75 insertions, 17 deletions
diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 8680a0f86c5a..807694b4f41f 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -9,12 +9,15 @@ title: Brcmstb PCIe Host Controller Device Tree Bindings
maintainers:
- Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
-allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
-
properties:
compatible:
- const: brcm,bcm2711-pcie # The Raspberry Pi 4
+ items:
+ - enum:
+ - brcm,bcm2711-pcie # The Raspberry Pi 4
+ - brcm,bcm7211-pcie # Broadcom STB version of RPi4
+ - brcm,bcm7278-pcie # Broadcom 7278 Arm
+ - brcm,bcm7216-pcie # Broadcom 7216 Arm
+ - brcm,bcm7445-pcie # Broadcom 7445 Arm
reg:
maxItems: 1
@@ -34,10 +37,12 @@ properties:
- const: msi
ranges:
- maxItems: 1
+ minItems: 1
+ maxItems: 4
dma-ranges:
- maxItems: 1
+ minItems: 1
+ maxItems: 6
clocks:
maxItems: 1
@@ -58,8 +63,31 @@ properties:
aspm-no-l0s: true
+ resets:
+ description: for "brcm,bcm7216-pcie", must be a valid reset
+ phandle pointing to the RESCAL reset controller provider node.
+ $ref: "/schemas/types.yaml#/definitions/phandle"
+
+ reset-names:
+ items:
+ - const: rescal
+
+ brcm,scb-sizes:
+ description: u64 giving the 64bit PCIe memory
+ viewport size of a memory controller. There may be up to
+ three controllers, and each size must be a power of two
+ with a size greater or equal to the amount of memory the
+ controller supports. Note that each memory controller
+ may have two component regions -- base and extended -- so
+ this information cannot be deduced from the dma-ranges.
+ $ref: /schemas/types.yaml#/definitions/uint64-array
+ items:
+ minItems: 1
+ maxItems: 3
+
required:
- reg
+ - ranges
- dma-ranges
- "#interrupt-cells"
- interrupts
@@ -68,6 +96,18 @@ required:
- interrupt-map
- msi-controller
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,bcm7216-pcie
+ then:
+ required:
+ - resets
+ - reset-names
+
unevaluatedProperties: false
examples:
@@ -93,7 +133,9 @@ examples:
msi-parent = <&pcie0>;
msi-controller;
ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
- dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
+ dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>,
+ <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
brcm,enable-ssc;
+ brcm,scb-sizes = <0x0000000080000000 0x0000000080000000>;
};
};
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index 99a386ea691c..daa99f7d4c3f 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -24,6 +24,8 @@ Required properties:
"fsl,ls1028a-pcie"
EP mode:
"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
+ "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"
+ "fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep"
- reg: base addresses and lengths of the PCIe controller register blocks.
- interrupts: A list of interrupt outputs of the controller. Must contain an
entry for each entry in the interrupt-names property.
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml
index 53d5952b7e57..84eeb7fe6e01 100644
--- a/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml
@@ -14,8 +14,12 @@ maintainers:
properties:
compatible:
items:
- - const: renesas,r8a774c0-pcie-ep
- - const: renesas,rcar-gen3-pcie-ep
+ - enum:
+ - renesas,r8a774a1-pcie-ep # RZ/G2M
+ - renesas,r8a774b1-pcie-ep # RZ/G2N
+ - renesas,r8a774c0-pcie-ep # RZ/G2E
+ - renesas,r8a774e1-pcie-ep # RZ/G2H
+ - const: renesas,rcar-gen3-pcie-ep # R-Car Gen3 and RZ/G2
reg:
maxItems: 5
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
index 1041c44a614f..14d307deff06 100644
--- a/Documentation/devicetree/bindings/pci/rcar-pci.txt
+++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
@@ -1,7 +1,8 @@
* Renesas R-Car PCIe interface
Required properties:
-compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC;
+compatible: "renesas,pcie-r8a7742" for the R8A7742 SoC;
+ "renesas,pcie-r8a7743" for the R8A7743 SoC;
"renesas,pcie-r8a7744" for the R8A7744 SoC;
"renesas,pcie-r8a774a1" for the R8A774A1 SoC;
"renesas,pcie-r8a774b1" for the R8A774B1 SoC;
diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
index f0558b9cf9e9..f4292d2c54e3 100644
--- a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
@@ -23,14 +23,22 @@ properties:
const: socionext,uniphier-pro5-pcie-ep
reg:
- maxItems: 4
+ minItems: 4
+ maxItems: 5
reg-names:
- items:
- - const: dbi
- - const: dbi2
- - const: link
- - const: addr_space
+ oneOf:
+ - items:
+ - const: dbi
+ - const: dbi2
+ - const: link
+ - const: addr_space
+ - items:
+ - const: dbi
+ - const: dbi2
+ - const: link
+ - const: addr_space
+ - const: atu
clocks:
maxItems: 2
diff --git a/Documentation/devicetree/bindings/pci/uniphier-pcie.txt b/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
index 1fa2c5906d4d..c4b7381733a0 100644
--- a/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
@@ -16,6 +16,7 @@ Required properties:
"dbi" - controller configuration registers
"link" - SoC-specific glue layer registers
"config" - PCIe configuration space
+ "atu" - iATU registers for DWC version 4.80 or later
- clocks: A phandle to the clock gate for PCIe glue layer including
the host controller.
- resets: A phandle to the reset line for PCIe glue layer including
diff --git a/Documentation/power/pci.rst b/Documentation/power/pci.rst
index 1831e431f725..b04fb18cc4e2 100644
--- a/Documentation/power/pci.rst
+++ b/Documentation/power/pci.rst
@@ -320,7 +320,7 @@ that these callbacks operate on::
unsigned int d2_support:1; /* Low power state D2 is supported */
unsigned int no_d1d2:1; /* D1 and D2 are forbidden */
unsigned int wakeup_prepared:1; /* Device prepared for wake up */
- unsigned int d3_delay; /* D3->D0 transition time in ms */
+ unsigned int d3hot_delay; /* D3hot->D0 transition time in ms */
...
};