Merge tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big USB and thunderbolt pull request for 5.11-rc1.

  Nothing major in here, just the grind of constant development to
  support new hardware and fix old issues:

   - thunderbolt updates for new USB4 hardware

   - cdns3 major driver updates

   - lots of typec updates and additions as more hardware is available

   - usb serial driver updates and fixes

   - other tiny USB driver updates

  All have been in linux-next with no reported issues"

* tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
  usb: phy: convert comma to semicolon
  usb: ucsi: convert comma to semicolon
  usb: typec: tcpm: convert comma to semicolon
  usb: typec: tcpm: Update vbus_vsafe0v on init
  usb: typec: tcpci: Enable bleed discharge when auto discharge is enabled
  usb: typec: Add class for plug alt mode device
  USB: typec: tcpci: Add Bleed discharge to POWER_CONTROL definition
  USB: typec: tcpm: Add a 30ms room for tPSSourceOn in PR_SWAP
  USB: typec: tcpm: Fix PR_SWAP error handling
  USB: typec: tcpm: Hard Reset after not receiving a Request
  USB: gadget: f_fs: remove likely/unlikely
  usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus
  USB: gadget: f_midi: setup SuperSpeed Plus descriptors
  USB: gadget: f_acm: add support for SuperSpeed Plus
  USB: gadget: f_rndis: fix bitrate for SuperSpeed and above
  usb: typec: intel_pmc_mux: Configure cable generation value for USB4
  MAINTAINERS: Add myself as a reviewer for CADENCE USB3 DRD IP DRIVER
  usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data()
  usb: chipidea: usbmisc_imx: Use of_device_get_match_data()
  usb: cdns3: fix NULL pointer dereference on no platform data
  ...

7 files changed, 306 insertions, 34 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt
index 0b4ab9e4b8f4..a91b4b24496e 100644
--- a/Documentation/ABI/testing/sysfs-bus-thunderbolt
+++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt
@@ -1,3 +1,31 @@
+What:		/sys/bus/thunderbolt/devices/<xdomain>/rx_speed
+Date:		Feb 2021
+KernelVersion:	5.11
+Contact:	Isaac Hazan <isaac.hazan@intel.com>
+Description:	This attribute reports the XDomain RX speed per lane.
+		All RX lanes run at the same speed.
+
+What:		/sys/bus/thunderbolt/devices/<xdomain>/rx_lanes
+Date:		Feb 2021
+KernelVersion:	5.11
+Contact:	Isaac Hazan <isaac.hazan@intel.com>
+Description:	This attribute reports the number of RX lanes the XDomain
+		is using simultaneously through its upstream port.
+
+What:		/sys/bus/thunderbolt/devices/<xdomain>/tx_speed
+Date:		Feb 2021
+KernelVersion:	5.11
+Contact:	Isaac Hazan <isaac.hazan@intel.com>
+Description:	This attribute reports the XDomain TX speed per lane.
+		All TX lanes run at the same speed.
+
+What:		/sys/bus/thunderbolt/devices/<xdomain>/tx_lanes
+Date:		Feb 2021
+KernelVersion:	5.11
+Contact:	Isaac Hazan <isaac.hazan@intel.com>
+Description:	This attribute reports number of TX lanes the XDomain
+		is using simultaneously through its upstream port.
+
 What: /sys/bus/thunderbolt/devices/.../domainX/boot_acl
 Date:		Jun 2018
 KernelVersion:	4.17
diff --git a/Documentation/ABI/testing/sysfs-class-typec b/Documentation/ABI/testing/sysfs-class-typec
index b7794e02ad20..8eab41e79ce6 100644
--- a/Documentation/ABI/testing/sysfs-class-typec
+++ b/Documentation/ABI/testing/sysfs-class-typec
@@ -139,6 +139,49 @@ Description:
 		Shows if the partner supports USB Power Delivery communication:
 		Valid values: yes, no
 
+What:		/sys/class/typec/<port>-partner/number_of_alternate_modes
+Date:		November 2020
+Contact:	Prashant Malani <pmalani@chromium.org>
+Description:
+		Shows the number of alternate modes which are advertised by the partner
+		during Power Delivery discovery. This file remains hidden until a value
+		greater than or equal to 0 is set by Type C port driver.
+
+What:		/sys/class/typec/<port>-partner/type
+Date:		December 2020
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:	USB Power Delivery Specification defines a set of product types
+		for the partner devices. This file will show the product type of
+		the partner if it is known. Dual-role capable partners will have
+		both UFP and DFP product types defined, but only one that
+		matches the current role will be active at the time. If the
+		product type of the partner is not visible to the device driver,
+		this file will not exist.
+
+		When the partner product type is detected, or changed with role
+		swap, uvevent is also raised that contains PRODUCT_TYPE=<product
+		type> (for example PRODUCT_TYPE=hub).
+
+		Valid values:
+
+		UFP / device role
+		======================  ==========================
+		undefined		-
+		hub			PDUSB Hub
+		peripheral		PDUSB Peripheral
+		psd			Power Bank
+		ama			Alternate Mode Adapter
+		======================  ==========================
+
+		DFP / host role
+		======================  ==========================
+		undefined		-
+		hub			PDUSB Hub
+		host			PDUSB Host
+		power_brick		Power Brick
+		amc			Alternate Mode Controller
+		======================  ==========================
+
 What:		/sys/class/typec/<port>-partner>/identity/
 Date:		April 2017
 Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
@@ -151,31 +194,6 @@ Description:
 		directory exists, it will have an attribute file for every VDO
 		in Discover Identity command result.
 
-What:		/sys/class/typec/<port>-partner/identity/id_header
-Date:		April 2017
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		ID Header VDO part of Discover Identity command result. The
-		value will show 0 until Discover Identity command result becomes
-		available. The value can be polled.
-
-What:		/sys/class/typec/<port>-partner/identity/cert_stat
-Date:		April 2017
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Cert Stat VDO part of Discover Identity command result. The
-		value will show 0 until Discover Identity command result becomes
-		available. The value can be polled.
-
-What:		/sys/class/typec/<port>-partner/identity/product
-Date:		April 2017
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Product VDO part of Discover Identity command result. The value
-		will show 0 until Discover Identity command result becomes
-		available. The value can be polled.
-
-
 USB Type-C cable devices (eg. /sys/class/typec/port0-cable/)
 
 Note: Electronically Marked Cables will have a device also for one cable plug
@@ -187,9 +205,21 @@ described in USB Type-C and USB Power Delivery specifications.
 What:		/sys/class/typec/<port>-cable/type
 Date:		April 2017
 Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Shows if the cable is active.
-		Valid values: active, passive
+Description:	USB Power Delivery Specification defines a set of product types
+		for the cables. This file will show the product type of the
+		cable if it is known. If the product type of the cable is not
+		visible to the device driver, this file will not exist.
+
+		When the cable product type is detected, uvevent is also raised
+		with PRODUCT_TYPE showing the product type of the cable.
+
+		Valid values:
+
+		======================  ==========================
+		undefined		-
+		active			Active Cable
+		passive			Passive Cable
+		======================  ==========================
 
 What:		/sys/class/typec/<port>-cable/plug_type
 Date:		April 2017
@@ -202,17 +232,37 @@ Description:
 		- type-c
 		- captive
 
-What:		/sys/class/typec/<port>-cable/identity/
+What:		/sys/class/typec/<port>-<plug>/number_of_alternate_modes
+Date:		November 2020
+Contact:	Prashant Malani <pmalani@chromium.org>
+Description:
+		Shows the number of alternate modes which are advertised by the plug
+		associated with a particular cable during Power Delivery discovery.
+		This file remains hidden until a value greater than or equal to 0
+		is set by Type C port driver.
+
+
+USB Type-C partner/cable Power Delivery Identity objects
+
+NOTE: The following attributes will be applicable to both
+partner (e.g /sys/class/typec/port0-partner/) and
+cable (e.g /sys/class/typec/port0-cable/) devices. Consequently, the example file
+paths below are prefixed with "/sys/class/typec/<port>-{partner|cable}/" to
+reflect this.
+
+What:		/sys/class/typec/<port>-{partner|cable}/identity/
 Date:		April 2017
 Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
 Description:
 		This directory appears only if the port device driver is capable
 		of showing the result of Discover Identity USB power delivery
 		command. That will not always be possible even when USB power
-		delivery is supported. If the directory exists, it will have an
-		attribute for every VDO returned by Discover Identity command.
+		delivery is supported, for example when USB power delivery
+		communication for the port is mostly handled in firmware. If the
+		directory exists, it will have an attribute file for every VDO
+		in Discover Identity command result.
 
-What:		/sys/class/typec/<port>-cable/identity/id_header
+What:		/sys/class/typec/<port>-{partner|cable}/identity/id_header
 Date:		April 2017
 Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
 Description:
@@ -220,7 +270,7 @@ Description:
 		value will show 0 until Discover Identity command result becomes
 		available. The value can be polled.
 
-What:		/sys/class/typec/<port>-cable/identity/cert_stat
+What:		/sys/class/typec/<port>-{partner|cable}/identity/cert_stat
 Date:		April 2017
 Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
 Description:
@@ -228,7 +278,7 @@ Description:
 		value will show 0 until Discover Identity command result becomes
 		available. The value can be polled.
 
-What:		/sys/class/typec/<port>-cable/identity/product
+What:		/sys/class/typec/<port>-{partner|cable}/identity/product
 Date:		April 2017
 Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
 Description:
@@ -236,6 +286,30 @@ Description:
 		will show 0 until Discover Identity command result becomes
 		available. The value can be polled.
 
+What:		/sys/class/typec/<port>-{partner|cable}/identity/product_type_vdo1
+Date:		October 2020
+Contact:	Prashant Malani <pmalani@chromium.org>
+Description:
+		1st Product Type VDO of Discover Identity command result.
+		The value will show 0 until Discover Identity command result becomes
+		available and a valid Product Type VDO is returned.
+
+What:		/sys/class/typec/<port>-{partner|cable}/identity/product_type_vdo2
+Date:		October 2020
+Contact:	Prashant Malani <pmalani@chromium.org>
+Description:
+		2nd Product Type VDO of Discover Identity command result.
+		The value will show 0 until Discover Identity command result becomes
+		available and a valid Product Type VDO is returned.
+
+What:		/sys/class/typec/<port>-{partner|cable}/identity/product_type_vdo3
+Date:		October 2020
+Contact:	Prashant Malani <pmalani@chromium.org>
+Description:
+		3rd Product Type VDO of Discover Identity command result.
+		The value will show 0 until Discover Identity command result becomes
+		available and a valid Product Type VDO is returned.
+
 
 USB Type-C port alternate mode devices.
 
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 23f209c8c19a..c0ca130fe3c9 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -5665,6 +5665,7 @@
 					device);
 				j = NO_REPORT_LUNS (don't use report luns
 					command, uas only);
+				k = NO_SAME (do not use WRITE_SAME, uas only)
 				l = NOT_LOCKABLE (don't try to lock and
 					unlock ejectable media, not on uas);
 				m = MAX_SECTORS_64 (don't transfer more
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 728f82db073d..62781518aefc 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -147,6 +147,25 @@ properties:
     required:
       - port@0
 
+  new-source-frs-typec-current:
+    description: Initial current capability of the new source when vSafe5V
+      is applied during PD3.0 Fast Role Swap. "Table 6-14 Fixed Supply PDO - Sink"
+      of "USB Power Delivery Specification Revision 3.0, Version 1.2" provides the
+      different power levels and "6.4.1.3.1.6 Fast Role Swap USB Type-C Current"
+      provides a detailed description of the field. The sink PDO from current source
+      reflects the current source's(i.e. transmitter of the FRS signal) power
+      requirement during fr swap. The current sink (i.e. receiver of the FRS signal),
+      a.k.a new source, should check if it will be able to satisfy the current source's,
+      new sink's, requirement during frswap before enabling the frs signal reception.
+      This property refers to maximum current capability that the current sink can
+      satisfy. During FRS, VBUS voltage is at 5V, as the partners are in implicit
+      contract, hence, the power level is only a function of the current capability.
+      "1" refers to default USB power level as described by "Table 6-14 Fixed Supply PDO - Sink".
+      "2" refers to 1.5A@5V.
+      "3" refers to 3.0A@5V.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3]
+
 required:
   - compatible
 
diff --git a/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml b/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
new file mode 100644
index 000000000000..ffa148b9eaa8
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/brcm,usb-pinmap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom USB pin map Controller Device Tree Bindings
+
+maintainers:
+  - Al Cooper <alcooperx@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - const: brcm,usb-pinmap
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Interrupt for signals mirrored to out-gpios.
+
+  in-gpios:
+    description: Array of one or two GPIO pins used for input signals.
+
+  brcm,in-functions:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Array of input signal names, one per gpio in in-gpios.
+
+  brcm,in-masks:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Array of enable and mask pairs, one per gpio in-gpios.
+
+  out-gpios:
+    description: Array of one GPIO pin used for output signals.
+
+  brcm,out-functions:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Array of output signal names, one per gpio in out-gpios.
+
+  brcm,out-masks:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Array of enable, value, changed and clear masks, one
+      per gpio in out-gpios.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+dependencies:
+  in-gpios: [ interrupts ]
+
+examples:
+  - |
+    usb_pinmap: usb-pinmap@22000d0 {
+        compatible = "brcm,usb-pinmap";
+        reg = <0x22000d0 0x4>;
+        in-gpios = <&gpio 18 0>, <&gpio 19 0>;
+        brcm,in-functions = "VBUS", "PWRFLT";
+        brcm,in-masks = <0x8000 0x40000 0x10000 0x80000>;
+        out-gpios = <&gpio 20 0>;
+        brcm,out-functions = "PWRON";
+        brcm,out-masks = <0x20000 0x800000 0x400000 0x200000>;
+        interrupts = <0x0 0xb2 0x4>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
index d6af2794d444..a407e1143cf4 100644
--- a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
+++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
@@ -26,16 +26,21 @@ properties:
       - const: dev
 
   interrupts:
+    minItems: 3
     items:
       - description: OTG/DRD controller interrupt
       - description: XHCI host controller interrupt
       - description: Device controller interrupt
+      - description: interrupt used to wake up core, e.g when usbcmd.rs is
+                     cleared by xhci core, this interrupt is optional
 
   interrupt-names:
+    minItems: 3
     items:
       - const: host
       - const: peripheral
       - const: otg
+      - const: wakeup
 
   dr_mode:
     enum: [host, otg, peripheral]
diff --git a/Documentation/devicetree/bindings/usb/maxim,max33359.yaml b/Documentation/devicetree/bindings/usb/maxim,max33359.yaml
new file mode 100644
index 000000000000..93a19eda610b
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/maxim,max33359.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/maxim,max33359.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Maxim TCPCI Type-C PD controller DT bindings
+
+maintainers:
+  - Badhri Jagan Sridharan <badhri@google.com>
+
+description: Maxim TCPCI Type-C PD controller
+
+properties:
+  compatible:
+    enum:
+      - maxim,max33359
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    type: object
+    $ref: ../connector/usb-connector.yaml#
+    description:
+      Properties for usb c connector.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - connector
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/usb/pd.h>
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        maxtcpc@25 {
+            compatible = "maxim,max33359";
+            reg = <0x25>;
+            interrupt-parent = <&gpa8>;
+            interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+            connector {
+                compatible = "usb-c-connector";
+                label = "USB-C";
+                data-role = "dual";
+                power-role = "dual";
+                try-power-role = "sink";
+                self-powered;
+                op-sink-microwatt = <2600000>;
+                new-source-frs-typec-current = <FRS_5V_1P5A>;
+                source-pdos = <PDO_FIXED(5000, 900,
+                                         PDO_FIXED_SUSPEND |
+                                         PDO_FIXED_USB_COMM |
+                                         PDO_FIXED_DATA_SWAP |
+                                         PDO_FIXED_DUAL_ROLE)>;
+                sink-pdos = <PDO_FIXED(5000, 3000,
+                                       PDO_FIXED_USB_COMM |
+                                       PDO_FIXED_DATA_SWAP |
+                                       PDO_FIXED_DUAL_ROLE)
+                                       PDO_FIXED(9000, 2000, 0)>;
+            };
+        };
+    };
+...