Merge branch 'akpm' (patches from Andrew)

Merge yet more updates from Andrew Morton:
 "This is the material which was staged after willystuff in linux-next.

  Subsystems affected by this patch series: mm (debug, selftests,
  pagecache, thp, rmap, migration, kasan, hugetlb, pagemap, madvise),
  and selftests"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (113 commits)
  selftests: kselftest framework: provide "finished" helper
  mm: madvise: MADV_DONTNEED_LOCKED
  mm: fix race between MADV_FREE reclaim and blkdev direct IO read
  mm: generalize ARCH_HAS_FILTER_PGPROT
  mm: unmap_mapping_range_tree() with i_mmap_rwsem shared
  mm: warn on deleting redirtied only if accounted
  mm/huge_memory: remove stale locking logic from __split_huge_pmd()
  mm/huge_memory: remove stale page_trans_huge_mapcount()
  mm/swapfile: remove stale reuse_swap_page()
  mm/khugepaged: remove reuse_swap_page() usage
  mm/huge_memory: streamline COW logic in do_huge_pmd_wp_page()
  mm: streamline COW logic in do_swap_page()
  mm: slightly clarify KSM logic in do_swap_page()
  mm: optimize do_wp_page() for fresh pages in local LRU pagevecs
  mm: optimize do_wp_page() for exclusive pages in the swapcache
  mm/huge_memory: make is_transparent_hugepage() static
  userfaultfd/selftests: enable hugetlb remap and remove event testing
  selftests/vm: add hugetlb madvise MADV_DONTNEED MADV_REMOVE test
  mm: enable MADV_DONTNEED for hugetlb mappings
  kasan: disable LOCKDEP when printing reports
  ...

2 files changed, 70 insertions, 12 deletions

diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst
index 8089c559d339..7614a1fc30fa 100644
--- a/Documentation/dev-tools/kasan.rst
+++ b/Documentation/dev-tools/kasan.rst
@@ -30,7 +30,7 @@ Software tag-based KASAN mode is only supported in Clang.
 
 The hardware KASAN mode (#3) relies on hardware to perform the checks but
 still requires a compiler version that supports memory tagging instructions.
-This mode is supported in GCC 10+ and Clang 11+.
+This mode is supported in GCC 10+ and Clang 12+.
 
 Both software KASAN modes work with SLUB and SLAB memory allocators,
 while the hardware tag-based KASAN currently only supports SLUB.
@@ -206,6 +206,9 @@ additional boot parameters that allow disabling KASAN or controlling features:
   Asymmetric mode: a bad access is detected synchronously on reads and
   asynchronously on writes.
 
+- ``kasan.vmalloc=off`` or ``=on`` disables or enables tagging of vmalloc
+  allocations (default: ``on``).
+
 - ``kasan.stacktrace=off`` or ``=on`` disables or enables alloc and free stack
   traces collection (default: ``on``).
 
@@ -279,8 +282,8 @@ Software tag-based KASAN uses 0xFF as a match-all pointer tag (accesses through
 pointers with the 0xFF pointer tag are not checked). The value 0xFE is currently
 reserved to tag freed memory regions.
 
-Software tag-based KASAN currently only supports tagging of slab and page_alloc
-memory.
+Software tag-based KASAN currently only supports tagging of slab, page_alloc,
+and vmalloc memory.
 
 Hardware tag-based KASAN
 ~~~~~~~~~~~~~~~~~~~~~~~~
@@ -303,8 +306,8 @@ Hardware tag-based KASAN uses 0xFF as a match-all pointer tag (accesses through
 pointers with the 0xFF pointer tag are not checked). The value 0xFE is currently
 reserved to tag freed memory regions.
 
-Hardware tag-based KASAN currently only supports tagging of slab and page_alloc
-memory.
+Hardware tag-based KASAN currently only supports tagging of slab, page_alloc,
+and VM_ALLOC-based vmalloc memory.
 
 If the hardware does not support MTE (pre ARMv8.5), hardware tag-based KASAN
 will not be enabled. In this case, all KASAN boot parameters are ignored.
@@ -319,6 +322,8 @@ checking gets disabled.
 Shadow memory
 -------------
 
+The contents of this section are only applicable to software KASAN modes.
+
 The kernel maps memory in several different parts of the address space.
 The range of kernel virtual addresses is large: there is not enough real
 memory to support a real shadow region for every address that could be
@@ -349,7 +354,7 @@ CONFIG_KASAN_VMALLOC
 
 With ``CONFIG_KASAN_VMALLOC``, KASAN can cover vmalloc space at the
 cost of greater memory usage. Currently, this is supported on x86,
-riscv, s390, and powerpc.
+arm64, riscv, s390, and powerpc.
 
 This works by hooking into vmalloc and vmap and dynamically
 allocating real shadow memory to back the mappings.
diff --git a/Documentation/vm/page_owner.rst b/Documentation/vm/page_owner.rst
index 905555e3e483..c4de6f8dabe9 100644
--- a/Documentation/vm/page_owner.rst
+++ b/Documentation/vm/page_owner.rst
@@ -78,7 +78,7 @@ Usage
 
 2) Enable page owner: add "page_owner=on" to boot cmdline.
 
-3) Do the job what you want to debug
+3) Do the job that you want to debug.
 
 4) Analyze information from page owner::
 
@@ -89,22 +89,75 @@ Usage
 
 	Page allocated via order XXX, ...
 	PFN XXX ...
-	 // Detailed stack
+	// Detailed stack
 
 	Page allocated via order XXX, ...
 	PFN XXX ...
-	 // Detailed stack
+	// Detailed stack
 
    The ``page_owner_sort`` tool ignores ``PFN`` rows, puts the remaining rows
    in buf, uses regexp to extract the page order value, counts the times
-   and pages of buf, and finally sorts them according to the times.
+   and pages of buf, and finally sorts them according to the parameter(s).
 
    See the result about who allocated each page
    in the ``sorted_page_owner.txt``. General output::
 
 	XXX times, XXX pages:
 	Page allocated via order XXX, ...
-	 // Detailed stack
+	// Detailed stack
 
    By default, ``page_owner_sort`` is sorted according to the times of buf.
-   If you want to sort by the pages nums of buf, use the ``-m`` parameter.
+   If you want to sort by the page nums of buf, use the ``-m`` parameter.
+   The detailed parameters are:
+
+   fundamental function:
+
+	Sort:
+		-a		Sort by memory allocation time.
+		-m		Sort by total memory.
+		-p		Sort by pid.
+		-P		Sort by tgid.
+		-n		Sort by task command name.
+		-r		Sort by memory release time.
+		-s		Sort by stack trace.
+		-t		Sort by times (default).
+
+   additional function:
+
+	Cull:
+		-c		Cull by comparing stacktrace instead of total block.
+		--cull <rules>
+				Specify culling rules.Culling syntax is key[,key[,...]].Choose a
+				multi-letter key from the **STANDARD FORMAT SPECIFIERS** section.
+
+
+		<rules> is a single argument in the form of a comma-separated list,
+		which offers a way to specify individual culling rules.  The recognized
+		keywords are described in the **STANDARD FORMAT SPECIFIERS** section below.
+		<rules> can be specified by the sequence of keys k1,k2, ..., as described in
+		the STANDARD SORT KEYS section below. Mixed use of abbreviated and
+		complete-form of keys is allowed.
+
+
+		Examples:
+				./page_owner_sort <input> <output> --cull=stacktrace
+				./page_owner_sort <input> <output> --cull=st,pid,name
+				./page_owner_sort <input> <output> --cull=n,f
+
+	Filter:
+		-f		Filter out the information of blocks whose memory has been released.
+
+	Select:
+		--pid <PID>		Select by pid.
+		--tgid <TGID>		Select by tgid.
+		--name <command>	Select by task command name.
+
+STANDARD FORMAT SPECIFIERS
+==========================
+
+	KEY		LONG		DESCRIPTION
+	p		pid		process ID
+	tg		tgid		thread group ID
+	n		name		task command name
+	f		free		whether the page has been released or not
+	st		stacktrace	stace trace of the page allocation