diff options
author | Dave Airlie <airlied@redhat.com> | 2018-03-28 07:30:41 +0300 |
---|---|---|
committer | Dave Airlie <airlied@redhat.com> | 2018-03-28 07:30:41 +0300 |
commit | 2b4f44eec2be2688511c2b617d0e1b4f94c45ba4 (patch) | |
tree | 533c03602f4ae6d6404db6fa56c88e6f83e1bebe /Documentation | |
parent | 33d009cd889490838c5db9b9339856c9e3d3facc (diff) | |
parent | 3eb2ce825ea1ad89d20f7a3b5780df850e4be274 (diff) | |
download | linux-2b4f44eec2be2688511c2b617d0e1b4f94c45ba4.tar.xz |
Backmerge tag 'v4.16-rc7' into drm-next
Linux 4.16-rc7
This was requested by Daniel, and things were getting
a bit hard to reconcile, most of the conflicts were
trivial though.
Diffstat (limited to 'Documentation')
38 files changed, 674 insertions, 169 deletions
diff --git a/Documentation/ABI/testing/sysfs-ata b/Documentation/ABI/testing/sysfs-ata index aa4296498859..9ab0ef1dd1c7 100644 --- a/Documentation/ABI/testing/sysfs-ata +++ b/Documentation/ABI/testing/sysfs-ata @@ -1,110 +1,139 @@ What: /sys/class/ata_... -Date: August 2008 -Contact: Gwendal Grignou<gwendal@google.com> Description: - -Provide a place in sysfs for storing the ATA topology of the system. This allows -retrieving various information about ATA objects. + Provide a place in sysfs for storing the ATA topology of the + system. This allows retrieving various information about ATA + objects. Files under /sys/class/ata_port ------------------------------- - For each port, a directory ataX is created where X is the ata_port_id of - the port. The device parent is the ata host device. +For each port, a directory ataX is created where X is the ata_port_id of the +port. The device parent is the ata host device. -idle_irq (read) - Number of IRQ received by the port while idle [some ata HBA only]. +What: /sys/class/ata_port/ataX/nr_pmp_links +What: /sys/class/ata_port/ataX/idle_irq +Date: May, 2010 +KernelVersion: v2.6.37 +Contact: Gwendal Grignou <gwendal@chromium.org> +Description: + nr_pmp_links: (RO) If a SATA Port Multiplier (PM) is + connected, the number of links behind it. -nr_pmp_links (read) + idle_irq: (RO) Number of IRQ received by the port while + idle [some ata HBA only]. - If a SATA Port Multiplier (PM) is connected, number of link behind it. + +What: /sys/class/ata_port/ataX/port_no +Date: May, 2013 +KernelVersion: v3.11 +Contact: Gwendal Grignou <gwendal@chromium.org> +Description: + (RO) Host local port number. While registering host controller, + port numbers are tracked based upon number of ports available on + the controller. This attribute is needed by udev for composing + persistent links in /dev/disk/by-path. Files under /sys/class/ata_link ------------------------------- - Behind each port, there is a ata_link. If there is a SATA PM in the - topology, 15 ata_link objects are created. - - If a link is behind a port, the directory name is linkX, where X is - ata_port_id of the port. - If a link is behind a PM, its name is linkX.Y where X is ata_port_id - of the parent port and Y the PM port. +Behind each port, there is a ata_link. If there is a SATA PM in the topology, 15 +ata_link objects are created. -hw_sata_spd_limit +If a link is behind a port, the directory name is linkX, where X is ata_port_id +of the port. If a link is behind a PM, its name is linkX.Y where X is +ata_port_id of the parent port and Y the PM port. - Maximum speed supported by the connected SATA device. -sata_spd_limit +What: /sys/class/ata_link/linkX[.Y]/hw_sata_spd_limit +What: /sys/class/ata_link/linkX[.Y]/sata_spd_limit +What: /sys/class/ata_link/linkX[.Y]/sata_spd +Date: May, 2010 +KernelVersion: v2.6.37 +Contact: Gwendal Grignou <gwendal@chromium.org> +Description: + hw_sata_spd_limit: (RO) Maximum speed supported by the + connected SATA device. - Maximum speed imposed by libata. + sata_spd_limit: (RO) Maximum speed imposed by libata. -sata_spd + sata_spd: (RO) Current speed of the link + eg. 1.5, 3 Gbps etc. - Current speed of the link [1.5, 3Gps,...]. Files under /sys/class/ata_device --------------------------------- - Behind each link, up to two ata device are created. - The name of the directory is devX[.Y].Z where: - - X is ata_port_id of the port where the device is connected, - - Y the port of the PM if any, and - - Z the device id: for PATA, there is usually 2 devices [0,1], - only 1 for SATA. - -class - Device class. Can be "ata" for disk, "atapi" for packet device, - "pmp" for PM, or "none" if no device was found behind the link. - -dma_mode +Behind each link, up to two ata devices are created. +The name of the directory is devX[.Y].Z where: +- X is ata_port_id of the port where the device is connected, +- Y the port of the PM if any, and +- Z the device id: for PATA, there is usually 2 devices [0,1], only 1 for SATA. + + +What: /sys/class/ata_device/devX[.Y].Z/spdn_cnt +What: /sys/class/ata_device/devX[.Y].Z/gscr +What: /sys/class/ata_device/devX[.Y].Z/ering +What: /sys/class/ata_device/devX[.Y].Z/id +What: /sys/class/ata_device/devX[.Y].Z/pio_mode +What: /sys/class/ata_device/devX[.Y].Z/xfer_mode +What: /sys/class/ata_device/devX[.Y].Z/dma_mode +What: /sys/class/ata_device/devX[.Y].Z/class +Date: May, 2010 +KernelVersion: v2.6.37 +Contact: Gwendal Grignou <gwendal@chromium.org> +Description: + spdn_cnt: (RO) Number of times libata decided to lower the + speed of link due to errors. - Transfer modes supported by the device when in DMA mode. - Mostly used by PATA device. + gscr: (RO) Cached result of the dump of PM GSCR + register. Valid registers are: -pio_mode + 0: SATA_PMP_GSCR_PROD_ID, + 1: SATA_PMP_GSCR_REV, + 2: SATA_PMP_GSCR_PORT_INFO, + 32: SATA_PMP_GSCR_ERROR, + 33: SATA_PMP_GSCR_ERROR_EN, + 64: SATA_PMP_GSCR_FEAT, + 96: SATA_PMP_GSCR_FEAT_EN, + 130: SATA_PMP_GSCR_SII_GPIO - Transfer modes supported by the device when in PIO mode. - Mostly used by PATA device. + Only valid if the device is a PM. -xfer_mode + ering: (RO) Formatted output of the error ring of the + device. - Current transfer mode. + id: (RO) Cached result of IDENTIFY command, as + described in ATA8 7.16 and 7.17. Only valid if + the device is not a PM. -id + pio_mode: (RO) Transfer modes supported by the device when + in PIO mode. Mostly used by PATA device. - Cached result of IDENTIFY command, as described in ATA8 7.16 and 7.17. - Only valid if the device is not a PM. + xfer_mode: (RO) Current transfer mode -gscr + dma_mode: (RO) Transfer modes supported by the device when + in DMA mode. Mostly used by PATA device. - Cached result of the dump of PM GSCR register. - Valid registers are: - 0: SATA_PMP_GSCR_PROD_ID, - 1: SATA_PMP_GSCR_REV, - 2: SATA_PMP_GSCR_PORT_INFO, - 32: SATA_PMP_GSCR_ERROR, - 33: SATA_PMP_GSCR_ERROR_EN, - 64: SATA_PMP_GSCR_FEAT, - 96: SATA_PMP_GSCR_FEAT_EN, - 130: SATA_PMP_GSCR_SII_GPIO - Only valid if the device is a PM. + class: (RO) Device class. Can be "ata" for disk, + "atapi" for packet device, "pmp" for PM, or + "none" if no device was found behind the link. -trim - Shows the DSM TRIM mode currently used by the device. Valid - values are: - unsupported: Drive does not support DSM TRIM - unqueued: Drive supports unqueued DSM TRIM only - queued: Drive supports queued DSM TRIM - forced_unqueued: Drive's queued DSM support is known to be - buggy and only unqueued TRIM commands - are sent +What: /sys/class/ata_device/devX[.Y].Z/trim +Date: May, 2015 +KernelVersion: v4.10 +Contact: Gwendal Grignou <gwendal@chromium.org> +Description: + (RO) Shows the DSM TRIM mode currently used by the device. Valid + values are: -spdn_cnt + unsupported: Drive does not support DSM TRIM - Number of time libata decided to lower the speed of link due to errors. + unqueued: Drive supports unqueued DSM TRIM only -ering + queued: Drive supports queued DSM TRIM - Formatted output of the error ring of the device. + forced_unqueued: Drive's queued DSM support is known to + be buggy and only unqueued TRIM commands + are sent diff --git a/Documentation/ABI/testing/sysfs-block-device b/Documentation/ABI/testing/sysfs-block-device new file mode 100644 index 000000000000..82ef6eab042d --- /dev/null +++ b/Documentation/ABI/testing/sysfs-block-device @@ -0,0 +1,58 @@ +What: /sys/block/*/device/sw_activity +Date: Jun, 2008 +KernelVersion: v2.6.27 +Contact: linux-ide@vger.kernel.org +Description: + (RW) Used by drivers which support software controlled activity + LEDs. + + It has the following valid values: + + 0 OFF - the LED is not activated on activity + 1 BLINK_ON - the LED blinks on every 10ms when activity is + detected. + 2 BLINK_OFF - the LED is on when idle, and blinks off + every 10ms when activity is detected. + + Note that the user must turn sw_activity OFF it they wish to + control the activity LED via the em_message file. + + +What: /sys/block/*/device/unload_heads +Date: Sep, 2008 +KernelVersion: v2.6.28 +Contact: linux-ide@vger.kernel.org +Description: + (RW) Hard disk shock protection + + Writing an integer value to this file will take the heads of the + respective drive off the platter and block all I/O operations + for the specified number of milliseconds. + + - If the device does not support the unload heads feature, + access is denied with -EOPNOTSUPP. + - The maximal value accepted for a timeout is 30000 + milliseconds. + - A previously set timeout can be cancelled and disk can resume + normal operation immediately by specifying a timeout of 0. + - Some hard drives only comply with an earlier version of the + ATA standard, but support the unload feature nonetheless. + There is no safe way Linux can detect these devices, so this + is not enabled by default. If it is known that your device + does support the unload feature, then you can tell the kernel + to enable it by writing -1. It can be disabled again by + writing -2. + - Values below -2 are rejected with -EINVAL + + For more information, see + Documentation/laptops/disk-shock-protection.txt + + +What: /sys/block/*/device/ncq_prio_enable +Date: Oct, 2016 +KernelVersion: v4.10 +Contact: linux-ide@vger.kernel.org +Description: + (RW) Write to the file to turn on or off the SATA ncq (native + command queueing) support. By default this feature is turned + off. diff --git a/Documentation/ABI/testing/sysfs-class-scsi_host b/Documentation/ABI/testing/sysfs-class-scsi_host index 0eb255e7db12..bafc59fd7b69 100644 --- a/Documentation/ABI/testing/sysfs-class-scsi_host +++ b/Documentation/ABI/testing/sysfs-class-scsi_host @@ -27,3 +27,92 @@ Description: This file contains the current status of the "SSD Smart Path" the direct i/o path to physical devices. This setting is controller wide, affecting all configured logical drives on the controller. This file is readable and writable. + +What: /sys/class/scsi_host/hostX/link_power_management_policy +Date: Oct, 2007 +KernelVersion: v2.6.24 +Contact: linux-ide@vger.kernel.org +Description: + (RW) This parameter allows the user to read and set the link + (interface) power management. + + There are four possible options: + + min_power: Tell the controller to try to make the link use the + least possible power when possible. This may sacrifice some + performance due to increased latency when coming out of lower + power states. + + max_performance: Generally, this means no power management. + Tell the controller to have performance be a priority over power + management. + + medium_power: Tell the controller to enter a lower power state + when possible, but do not enter the lowest power state, thus + improving latency over min_power setting. + + med_power_with_dipm: Identical to the existing medium_power + setting except that it enables dipm (device initiated power + management) on top, which makes it match the Windows IRST (Intel + Rapid Storage Technology) driver settings. This setting is also + close to min_power, except that: + a) It does not use host-initiated slumber mode, but it does + allow device-initiated slumber + b) It does not enable low power device sleep mode (DevSlp). + +What: /sys/class/scsi_host/hostX/em_message +What: /sys/class/scsi_host/hostX/em_message_type +Date: Jun, 2008 +KernelVersion: v2.6.27 +Contact: linux-ide@vger.kernel.org +Description: + em_message: (RW) Enclosure management support. For the LED + protocol, writes and reads correspond to the LED message format + as defined in the AHCI spec. + + The user must turn sw_activity (under /sys/block/*/device/) OFF + it they wish to control the activity LED via the em_message + file. + + em_message_type: (RO) Displays the current enclosure management + protocol that is being used by the driver (for eg. LED, SAF-TE, + SES-2, SGPIO etc). + +What: /sys/class/scsi_host/hostX/ahci_port_cmd +What: /sys/class/scsi_host/hostX/ahci_host_caps +What: /sys/class/scsi_host/hostX/ahci_host_cap2 +Date: Mar, 2010 +KernelVersion: v2.6.35 +Contact: linux-ide@vger.kernel.org +Description: + [to be documented] + +What: /sys/class/scsi_host/hostX/ahci_host_version +Date: Mar, 2010 +KernelVersion: v2.6.35 +Contact: linux-ide@vger.kernel.org +Description: + (RO) Display the version of the AHCI spec implemented by the + host. + +What: /sys/class/scsi_host/hostX/em_buffer +Date: Apr, 2010 +KernelVersion: v2.6.35 +Contact: linux-ide@vger.kernel.org +Description: + (RW) Allows access to AHCI EM (enclosure management) buffer + directly if the host supports EM. + + For eg. the AHCI driver supports SGPIO EM messages but the + SATA/AHCI specs do not define the SGPIO message format of the EM + buffer. Different hardware(HW) vendors may have different + definitions. With the em_buffer attribute, this issue can be + solved by allowing HW vendors to provide userland drivers and + tools for their SGPIO initiators. + +What: /sys/class/scsi_host/hostX/em_message_supported +Date: Oct, 2009 +KernelVersion: v2.6.39 +Contact: linux-ide@vger.kernel.org +Description: + (RO) Displays supported enclosure management message types. diff --git a/Documentation/ABI/testing/sysfs-devices-platform-dock b/Documentation/ABI/testing/sysfs-devices-platform-dock new file mode 100644 index 000000000000..1d8c18f905c7 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-platform-dock @@ -0,0 +1,39 @@ +What: /sys/devices/platform/dock.N/docked +Date: Dec, 2006 +KernelVersion: 2.6.19 +Contact: linux-acpi@vger.kernel.org +Description: + (RO) Value 1 or 0 indicates whether the software believes the + laptop is docked in a docking station. + +What: /sys/devices/platform/dock.N/undock +Date: Dec, 2006 +KernelVersion: 2.6.19 +Contact: linux-acpi@vger.kernel.org +Description: + (WO) Writing to this file causes the software to initiate an + undock request to the firmware. + +What: /sys/devices/platform/dock.N/uid +Date: Feb, 2007 +KernelVersion: v2.6.21 +Contact: linux-acpi@vger.kernel.org +Description: + (RO) Displays the docking station the laptop is docked to. + +What: /sys/devices/platform/dock.N/flags +Date: May, 2007 +KernelVersion: v2.6.21 +Contact: linux-acpi@vger.kernel.org +Description: + (RO) Show dock station flags, useful for checking if undock + request has been made by the user (from the immediate_undock + option). + +What: /sys/devices/platform/dock.N/type +Date: Aug, 2008 +KernelVersion: v2.6.27 +Contact: linux-acpi@vger.kernel.org +Description: + (RO) Display the dock station type- dock_station, ata_bay or + battery_bay. diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index bfd29bc8d37a..4ed63b6cfb15 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -108,6 +108,8 @@ Description: CPU topology files that describe a logical CPU's relationship What: /sys/devices/system/cpu/cpuidle/current_driver /sys/devices/system/cpu/cpuidle/current_governer_ro + /sys/devices/system/cpu/cpuidle/available_governors + /sys/devices/system/cpu/cpuidle/current_governor Date: September 2007 Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> Description: Discover cpuidle policy and mechanism @@ -119,13 +121,84 @@ Description: Discover cpuidle policy and mechanism Idle policy (governor) is differentiated from idle mechanism (driver) - current_driver: displays current idle mechanism + current_driver: (RO) displays current idle mechanism - current_governor_ro: displays current idle policy + current_governor_ro: (RO) displays current idle policy + + With the cpuidle_sysfs_switch boot option enabled (meant for + developer testing), the following three attributes are visible + instead: + + current_driver: same as described above + + available_governors: (RO) displays a space separated list of + available governors + + current_governor: (RW) displays current idle policy. Users can + switch the governor at runtime by writing to this file. See files in Documentation/cpuidle/ for more information. +What: /sys/devices/system/cpu/cpuX/cpuidle/stateN/name + /sys/devices/system/cpu/cpuX/cpuidle/stateN/latency + /sys/devices/system/cpu/cpuX/cpuidle/stateN/power + /sys/devices/system/cpu/cpuX/cpuidle/stateN/time + /sys/devices/system/cpu/cpuX/cpuidle/stateN/usage +Date: September 2007 +KernelVersion: v2.6.24 +Contact: Linux power management list <linux-pm@vger.kernel.org> +Description: + The directory /sys/devices/system/cpu/cpuX/cpuidle contains per + logical CPU specific cpuidle information for each online cpu X. + The processor idle states which are available for use have the + following attributes: + + name: (RO) Name of the idle state (string). + + latency: (RO) The latency to exit out of this idle state (in + microseconds). + + power: (RO) The power consumed while in this idle state (in + milliwatts). + + time: (RO) The total time spent in this idle state (in microseconds). + + usage: (RO) Number of times this state was entered (a count). + + +What: /sys/devices/system/cpu/cpuX/cpuidle/stateN/desc +Date: February 2008 +KernelVersion: v2.6.25 +Contact: Linux power management list <linux-pm@vger.kernel.org> +Description: + (RO) A small description about the idle state (string). + + +What: /sys/devices/system/cpu/cpuX/cpuidle/stateN/disable +Date: March 2012 +KernelVersion: v3.10 +Contact: Linux power management list <linux-pm@vger.kernel.org> +Description: + (RW) Option to disable this idle state (bool). The behavior and + the effect of the disable variable depends on the implementation + of a particular governor. In the ladder governor, for example, + it is not coherent, i.e. if one is disabling a light state, then + all deeper states are disabled as well, but the disable variable + does not reflect it. Likewise, if one enables a deep state but a + lighter state still is disabled, then this has no effect. + + +What: /sys/devices/system/cpu/cpuX/cpuidle/stateN/residency +Date: March 2014 +KernelVersion: v3.15 +Contact: Linux power management list <linux-pm@vger.kernel.org> +Description: + (RO) Display the target residency i.e. the minimum amount of + time (in microseconds) this cpu should spend in this idle state + to make the transition worth the effort. + + What: /sys/devices/system/cpu/cpu#/cpufreq/* Date: pre-git history Contact: linux-pm@vger.kernel.org diff --git a/Documentation/ABI/testing/sysfs-platform-dptf b/Documentation/ABI/testing/sysfs-platform-dptf new file mode 100644 index 000000000000..325dc0667dbb --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-dptf @@ -0,0 +1,40 @@ +What: /sys/bus/platform/devices/INT3407:00/dptf_power/charger_type +Date: Jul, 2016 +KernelVersion: v4.10 +Contact: linux-acpi@vger.kernel.org +Description: + (RO) The charger type - Traditional, Hybrid or NVDC. + +What: /sys/bus/platform/devices/INT3407:00/dptf_power/adapter_rating_mw +Date: Jul, 2016 +KernelVersion: v4.10 +Contact: linux-acpi@vger.kernel.org +Description: + (RO) Adapter rating in milliwatts (the maximum Adapter power). + Must be 0 if no AC Adaptor is plugged in. + +What: /sys/bus/platform/devices/INT3407:00/dptf_power/max_platform_power_mw +Date: Jul, 2016 +KernelVersion: v4.10 +Contact: linux-acpi@vger.kernel.org +Description: + (RO) Maximum platform power that can be supported by the battery + in milliwatts. + +What: /sys/bus/platform/devices/INT3407:00/dptf_power/platform_power_source +Date: Jul, 2016 +KernelVersion: v4.10 +Contact: linux-acpi@vger.kernel.org +Description: + (RO) Display the platform power source + 0x00 = DC + 0x01 = AC + 0x02 = USB + 0x03 = Wireless Charger + +What: /sys/bus/platform/devices/INT3407:00/dptf_power/battery_steady_power +Date: Jul, 2016 +KernelVersion: v4.10 +Contact: linux-acpi@vger.kernel.org +Description: + (RO) The maximum sustained power for battery in milliwatts. diff --git a/Documentation/PCI/pci.txt b/Documentation/PCI/pci.txt index 611a75e4366e..badb26ac33dc 100644 --- a/Documentation/PCI/pci.txt +++ b/Documentation/PCI/pci.txt @@ -570,7 +570,9 @@ your driver if they're helpful, or just use plain hex constants. The device IDs are arbitrary hex numbers (vendor controlled) and normally used only in a single location, the pci_device_id table. -Please DO submit new vendor/device IDs to http://pciids.sourceforge.net/. +Please DO submit new vendor/device IDs to http://pci-ids.ucw.cz/. +There are mirrors of the pci.ids file at http://pciids.sourceforge.net/ +and https://github.com/pciutils/pciids. diff --git a/Documentation/accelerators/ocxl.rst b/Documentation/accelerators/ocxl.rst index 4f7af841d935..ddcc58d01cfb 100644 --- a/Documentation/accelerators/ocxl.rst +++ b/Documentation/accelerators/ocxl.rst @@ -152,6 +152,11 @@ OCXL_IOCTL_IRQ_SET_FD: Associate an event fd to an AFU interrupt so that the user process can be notified when the AFU sends an interrupt. +OCXL_IOCTL_GET_METADATA: + + Obtains configuration information from the card, such at the size of + MMIO areas, the AFU version, and the PASID for the current context. + mmap ---- diff --git a/Documentation/atomic_bitops.txt b/Documentation/atomic_bitops.txt index 5550bfdcce5f..be70b32c95d9 100644 --- a/Documentation/atomic_bitops.txt +++ b/Documentation/atomic_bitops.txt @@ -58,7 +58,12 @@ Like with atomic_t, the rule of thumb is: - RMW operations that have a return value are fully ordered. -Except for test_and_set_bit_lock() which has ACQUIRE semantics and + - RMW operations that are conditional are unordered on FAILURE, + otherwise the above rules apply. In the case of test_and_{}_bit() operations, + if the bit in memory is unchanged by the operation then it is deemed to have + failed. + +Except for a successful test_and_set_bit_lock() which has ACQUIRE semantics and clear_bit_unlock() which has RELEASE semantics. Since a platform only has a single means of achieving atomic operations diff --git a/Documentation/devicetree/bindings/misc/arm-charlcd.txt b/Documentation/devicetree/bindings/auxdisplay/arm-charlcd.txt index e28e2aac47f1..e28e2aac47f1 100644 --- a/Documentation/devicetree/bindings/misc/arm-charlcd.txt +++ b/Documentation/devicetree/bindings/auxdisplay/arm-charlcd.txt diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt index 6394ea9e3b9e..58b12e25bbb1 100644 --- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt +++ b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt @@ -16,6 +16,7 @@ Required properties: - ddc: phandle to the hdmi ddc node - phy: phandle to the hdmi phy node - samsung,syscon-phandle: phandle for system controller node for PMU. +- #sound-dai-cells: should be 0. Required properties for Exynos 4210, 4212, 5420 and 5433: - clocks: list of clock IDs from SoC clock driver. diff --git a/Documentation/devicetree/bindings/dma/mv-xor-v2.txt b/Documentation/devicetree/bindings/dma/mv-xor-v2.txt index 217a90eaabe7..9c38bbe7e6d7 100644 --- a/Documentation/devicetree/bindings/dma/mv-xor-v2.txt +++ b/Documentation/devicetree/bindings/dma/mv-xor-v2.txt @@ -11,7 +11,11 @@ Required properties: interrupts. Optional properties: -- clocks: Optional reference to the clock used by the XOR engine. +- clocks: Optional reference to the clocks used by the XOR engine. +- clock-names: mandatory if there is a second clock, in this case the + name must be "core" for the first clock and "reg" for the second + one + Example: diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt index 1812c848e369..abfae1beca2b 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.txt +++ b/Documentation/devicetree/bindings/eeprom/at24.txt @@ -38,9 +38,9 @@ Required properties: "catalyst", "microchip", + "nxp", "ramtron", "renesas", - "nxp", "st", Some vendors use different model names for chips which are just diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt index e9ebb8a20e0d..ba24ca7ba95e 100644 --- a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt +++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt @@ -3,11 +3,11 @@ Device-Tree bindings for sigma delta modulator Required properties: - compatible: should be "ads1201", "sd-modulator". "sd-modulator" can be use as a generic SD modulator if modulator not specified in compatible list. -- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers". +- #io-channel-cells = <0>: See the IIO bindings section "IIO consumers". Example node: ads1202: adc@0 { compatible = "sd-modulator"; - #io-channel-cells = <1>; + #io-channel-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt index 33c9a10fdc91..20f121daa910 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt @@ -14,6 +14,7 @@ Required properties: - "renesas,irqc-r8a7794" (R-Car E2) - "renesas,intc-ex-r8a7795" (R-Car H3) - "renesas,intc-ex-r8a7796" (R-Car M3-W) + - "renesas,intc-ex-r8a77965" (R-Car M3-N) - "renesas,intc-ex-r8a77970" (R-Car V3M) - "renesas,intc-ex-r8a77995" (R-Car D3) - #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt index 1d4d0f49c9d0..8c033d48e2ba 100644 --- a/Documentation/devicetree/bindings/net/dsa/marvell.txt +++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt @@ -50,14 +50,15 @@ Example: compatible = "marvell,mv88e6085"; reg = <0>; reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - }; - mdio { - #address-cells = <1>; - #size-cells = <0>; - switch1phy0: switch1phy0@0 { - reg = <0>; - interrupt-parent = <&switch0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + switch1phy0: switch1phy0@0 { + reg = <0>; + interrupt-parent = <&switch0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; }; @@ -74,23 +75,24 @@ Example: compatible = "marvell,mv88e6390"; reg = <0>; reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - }; - mdio { - #address-cells = <1>; - #size-cells = <0>; - switch1phy0: switch1phy0@0 { - reg = <0>; - interrupt-parent = <&switch0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + switch1phy0: switch1phy0@0 { + reg = <0>; + interrupt-parent = <&switch0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; }; - }; - mdio1 { - compatible = "marvell,mv88e6xxx-mdio-external"; - #address-cells = <1>; - #size-cells = <0>; - switch1phy9: switch1phy0@9 { - reg = <9>; + mdio1 { + compatible = "marvell,mv88e6xxx-mdio-external"; + #address-cells = <1>; + #size-cells = <0>; + switch1phy9: switch1phy0@9 { + reg = <9>; + }; }; }; }; diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt index c902261893b9..b4dc455eb155 100644 --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt +++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt @@ -18,6 +18,7 @@ Required properties: - "renesas,etheravb-r8a7795" for the R8A7795 SoC. - "renesas,etheravb-r8a7796" for the R8A7796 SoC. - "renesas,etheravb-r8a77970" for the R8A77970 SoC. + - "renesas,etheravb-r8a77980" for the R8A77980 SoC. - "renesas,etheravb-r8a77995" for the R8A77995 SoC. - "renesas,etheravb-rcar-gen3" as a fallback for the above R-Car Gen3 devices. @@ -26,7 +27,11 @@ Required properties: SoC-specific version corresponding to the platform first followed by the generic version. -- reg: offset and length of (1) the register block and (2) the stream buffer. +- reg: Offset and length of (1) the register block and (2) the stream buffer. + The region for the register block is mandatory. + The region for the stream buffer is optional, as it is only present on + R-Car Gen2 and RZ/G1 SoCs, and on R-Car H3 (R8A7795), M3-W (R8A7796), + and M3-N (R8A77965). - interrupts: A list of interrupt-specifiers, one for each entry in interrupt-names. If interrupt-names is not present, an interrupt specifier diff --git a/Documentation/devicetree/bindings/power/mti,mips-cpc.txt b/Documentation/devicetree/bindings/power/mti,mips-cpc.txt new file mode 100644 index 000000000000..c6b82511ae8a --- /dev/null +++ b/Documentation/devicetree/bindings/power/mti,mips-cpc.txt @@ -0,0 +1,8 @@ +Binding for MIPS Cluster Power Controller (CPC). + +This binding allows a system to specify where the CPC registers are +located. + +Required properties: +compatible : Should be "mti,mips-cpc". +regs: Should describe the address & size of the CPC register region. diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt index 3c81f78b5c27..5d254ab13ebf 100644 --- a/Documentation/devicetree/bindings/power/wakeup-source.txt +++ b/Documentation/devicetree/bindings/power/wakeup-source.txt @@ -60,7 +60,7 @@ Examples #size-cells = <0>; button@1 { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; linux,code = <116>; label = "POWER"; diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt b/Documentation/devicetree/bindings/thermal/imx-thermal.txt index 28be51afdb6a..379eb763073e 100644 --- a/Documentation/devicetree/bindings/thermal/imx-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/imx-thermal.txt @@ -22,7 +22,32 @@ Optional properties: - clocks : thermal sensor's clock source. Example: +ocotp: ocotp@21bc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,imx6sx-ocotp", "syscon"; + reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6SX_CLK_OCOTP>; + tempmon_calib: calib@38 { + reg = <0x38 4>; + }; + + tempmon_temp_grade: temp-grade@20 { + reg = <0x20 4>; + }; +}; + +tempmon: tempmon { + compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; +}; + +Legacy method (Deprecated): tempmon { compatible = "fsl,imx6q-tempmon"; fsl,tempmon = <&anatop>; diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt index e64d903bcbe8..46da5f184460 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.txt +++ b/Documentation/devicetree/bindings/usb/dwc2.txt @@ -19,7 +19,7 @@ Required properties: configured in FS mode; - "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs configured in HS mode; - - "st,stm32f7xx-hsotg": The DWC2 USB HS controller instance in STM32F7xx SoCs + - "st,stm32f7-hsotg": The DWC2 USB HS controller instance in STM32F7 SoCs configured in HS mode; - reg : Should contain 1 register range (address and length) - interrupts : Should contain 1 interrupt diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt b/Documentation/devicetree/bindings/usb/renesas_usb3.txt index 87a45e2f9b7f..2c071bb5801e 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usb3.txt +++ b/Documentation/devicetree/bindings/usb/renesas_usb3.txt @@ -4,6 +4,7 @@ Required properties: - compatible: Must contain one of the following: - "renesas,r8a7795-usb3-peri" - "renesas,r8a7796-usb3-peri" + - "renesas,r8a77965-usb3-peri" - "renesas,rcar-gen3-usb3-peri" for a generic R-Car Gen3 compatible device diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt index d060172f1529..43960faf5a88 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt +++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt @@ -12,6 +12,7 @@ Required properties: - "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device - "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device - "renesas,usbhs-r8a7796" for r8a7796 (R-Car M3-W) compatible device + - "renesas,usbhs-r8a77965" for r8a77965 (R-Car M3-N) compatible device - "renesas,usbhs-r8a77995" for r8a77995 (R-Car D3) compatible device - "renesas,usbhs-r7s72100" for r7s72100 (RZ/A1) compatible device - "renesas,rcar-gen2-usbhs" for R-Car Gen2 or RZ/G1 compatible devices diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index e2ea59bbca93..1651483a7048 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -13,6 +13,7 @@ Required properties: - "renesas,xhci-r8a7793" for r8a7793 SoC - "renesas,xhci-r8a7795" for r8a7795 SoC - "renesas,xhci-r8a7796" for r8a7796 SoC + - "renesas,xhci-r8a77965" for r8a77965 SoC - "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 or RZ/G1 compatible device - "renesas,rcar-gen3-xhci" for a generic R-Car Gen3 compatible device diff --git a/Documentation/features/sched/membarrier-sync-core/arch-support.txt b/Documentation/features/sched/membarrier-sync-core/arch-support.txt new file mode 100644 index 000000000000..2c815a7f1ba7 --- /dev/null +++ b/Documentation/features/sched/membarrier-sync-core/arch-support.txt @@ -0,0 +1,62 @@ +# +# Feature name: membarrier-sync-core +# Kconfig: ARCH_HAS_MEMBARRIER_SYNC_CORE +# description: arch supports core serializing membarrier +# +# Architecture requirements +# +# * arm64 +# +# Rely on eret context synchronization when returning from IPI handler, and +# when returning to user-space. +# +# * x86 +# +# x86-32 uses IRET as return from interrupt, which takes care of the IPI. +# However, it uses both IRET and SYSEXIT to go back to user-space. The IRET +# instruction is core serializing, but not SYSEXIT. +# +# x86-64 uses IRET as return from interrupt, which takes care of the IPI. +# However, it can return to user-space through either SYSRETL (compat code), +# SYSRETQ, or IRET. +# +# Given that neither SYSRET{L,Q}, nor SYSEXIT, are core serializing, we rely +# instead on write_cr3() performed by switch_mm() to provide core serialization +# after changing the current mm, and deal with the special case of kthread -> +# uthread (temporarily keeping current mm into active_mm) by issuing a +# sync_core_before_usermode() in that specific case. +# + ----------------------- + | arch |status| + ----------------------- + | alpha: | TODO | + | arc: | TODO | + | arm: | TODO | + | arm64: | ok | + | blackfin: | TODO | + | c6x: | TODO | + | cris: | TODO | + | frv: | TODO | + | h8300: | TODO | + | hexagon: | TODO | + | ia64: | TODO | + | m32r: | TODO | + | m68k: | TODO | + | metag: | TODO | + | microblaze: | TODO | + | mips: | TODO | + | mn10300: | TODO | + | nios2: | TODO | + | openrisc: | TODO | + | parisc: | TODO | + | powerpc: | TODO | + | s390: | TODO | + | score: | TODO | + | sh: | TODO | + | sparc: | TODO | + | tile: | TODO | + | um: | TODO | + | unicore32: | TODO | + | x86: | ok | + | xtensa: | TODO | + ----------------------- diff --git a/Documentation/gpu/tve200.rst b/Documentation/gpu/tve200.rst index 69b17b324e12..152ea9398f7e 100644 --- a/Documentation/gpu/tve200.rst +++ b/Documentation/gpu/tve200.rst @@ -3,4 +3,4 @@ ================================== .. kernel-doc:: drivers/gpu/drm/tve200/tve200_drv.c - :doc: Faraday TV Encoder 200 + :doc: Faraday TV Encoder TVE200 DRM Driver diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index d47702456926..65514c251318 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -28,8 +28,10 @@ Supported adapters: * Intel Wildcat Point (PCH) * Intel Wildcat Point-LP (PCH) * Intel BayTrail (SOC) + * Intel Braswell (SOC) * Intel Sunrise Point-H (PCH) * Intel Sunrise Point-LP (PCH) + * Intel Kaby Lake-H (PCH) * Intel DNV (SOC) * Intel Broxton (SOC) * Intel Lewisburg (PCH) diff --git a/Documentation/ia64/serial.txt b/Documentation/ia64/serial.txt index 6869c73de4e2..a63d2c54329b 100644 --- a/Documentation/ia64/serial.txt +++ b/Documentation/ia64/serial.txt @@ -111,7 +111,7 @@ TROUBLESHOOTING SERIAL CONSOLE PROBLEMS - If you don't have an HCDP, the kernel doesn't know where your console lives until the driver discovers serial - devices. Use "console=uart, io,0x3f8" (or appropriate + devices. Use "console=uart,io,0x3f8" (or appropriate address for your machine). Kernel and init script output works fine, but no "login:" prompt: diff --git a/Documentation/locking/mutex-design.txt b/Documentation/locking/mutex-design.txt index 60c482df1a38..818aca19612f 100644 --- a/Documentation/locking/mutex-design.txt +++ b/Documentation/locking/mutex-design.txt @@ -21,37 +21,23 @@ Implementation -------------- Mutexes are represented by 'struct mutex', defined in include/linux/mutex.h -and implemented in kernel/locking/mutex.c. These locks use a three -state atomic counter (->count) to represent the different possible -transitions that can occur during the lifetime of a lock: - - 1: unlocked - 0: locked, no waiters - negative: locked, with potential waiters - -In its most basic form it also includes a wait-queue and a spinlock -that serializes access to it. CONFIG_SMP systems can also include -a pointer to the lock task owner (->owner) as well as a spinner MCS -lock (->osq), both described below in (ii). +and implemented in kernel/locking/mutex.c. These locks use an atomic variable +(->owner) to keep track of the lock state during its lifetime. Field owner +actually contains 'struct task_struct *' to the current lock owner and it is +therefore NULL if not currently owned. Since task_struct pointers are aligned +at at least L1_CACHE_BYTES, low bits (3) are used to store extra state (e.g., +if waiter list is non-empty). In its most basic form it also includes a +wait-queue and a spinlock that serializes access to it. Furthermore, +CONFIG_MUTEX_SPIN_ON_OWNER=y systems use a spinner MCS lock (->osq), described +below in (ii). When acquiring a mutex, there are three possible paths that can be taken, depending on the state of the lock: -(i) fastpath: tries to atomically acquire the lock by decrementing the - counter. If it was already taken by another task it goes to the next - possible path. This logic is architecture specific. On x86-64, the - locking fastpath is 2 instructions: - - 0000000000000e10 <mutex_lock>: - e21: f0 ff 0b lock decl (%rbx) - e24: 79 08 jns e2e <mutex_lock+0x1e> - - the unlocking fastpath is equally tight: - - 0000000000000bc0 <mutex_unlock>: - bc8: f0 ff 07 lock incl (%rdi) - bcb: 7f 0a jg bd7 <mutex_unlock+0x17> - +(i) fastpath: tries to atomically acquire the lock by cmpxchg()ing the owner with + the current task. This only works in the uncontended case (cmpxchg() checks + against 0UL, so all 3 state bits above have to be 0). If the lock is + contended it goes to the next possible path. (ii) midpath: aka optimistic spinning, tries to spin for acquisition while the lock owner is running and there are no other tasks ready @@ -143,11 +129,10 @@ Test if the mutex is taken: Disadvantages ------------- -Unlike its original design and purpose, 'struct mutex' is larger than -most locks in the kernel. E.g: on x86-64 it is 40 bytes, almost twice -as large as 'struct semaphore' (24 bytes) and tied, along with rwsems, -for the largest lock in the kernel. Larger structure sizes mean more -CPU cache and memory footprint. +Unlike its original design and purpose, 'struct mutex' is among the largest +locks in the kernel. E.g: on x86-64 it is 32 bytes, where 'struct semaphore' +is 24 bytes and rw_semaphore is 40 bytes. Larger structure sizes mean more CPU +cache and memory footprint. When to use mutexes ------------------- diff --git a/Documentation/media/dmx.h.rst.exceptions b/Documentation/media/dmx.h.rst.exceptions index 63f55a9ae2b1..a8c4239ed95b 100644 --- a/Documentation/media/dmx.h.rst.exceptions +++ b/Documentation/media/dmx.h.rst.exceptions @@ -50,9 +50,15 @@ replace typedef dmx_filter_t :c:type:`dmx_filter` replace typedef dmx_pes_type_t :c:type:`dmx_pes_type` replace typedef dmx_input_t :c:type:`dmx_input` -ignore symbol DMX_OUT_DECODER -ignore symbol DMX_OUT_TAP -ignore symbol DMX_OUT_TS_TAP -ignore symbol DMX_OUT_TSDEMUX_TAP +replace symbol DMX_BUFFER_FLAG_HAD_CRC32_DISCARD :c:type:`dmx_buffer_flags` +replace symbol DMX_BUFFER_FLAG_TEI :c:type:`dmx_buffer_flags` +replace symbol DMX_BUFFER_PKT_COUNTER_MISMATCH :c:type:`dmx_buffer_flags` +replace symbol DMX_BUFFER_FLAG_DISCONTINUITY_DETECTED :c:type:`dmx_buffer_flags` +replace symbol DMX_BUFFER_FLAG_DISCONTINUITY_INDICATOR :c:type:`dmx_buffer_flags` + +replace symbol DMX_OUT_DECODER :c:type:`dmx_output` +replace symbol DMX_OUT_TAP :c:type:`dmx_output` +replace symbol DMX_OUT_TS_TAP :c:type:`dmx_output` +replace symbol DMX_OUT_TSDEMUX_TAP :c:type:`dmx_output` replace ioctl DMX_DQBUF dmx_qbuf diff --git a/Documentation/media/uapi/dvb/dmx-qbuf.rst b/Documentation/media/uapi/dvb/dmx-qbuf.rst index b48c4931658e..be5a4c6f1904 100644 --- a/Documentation/media/uapi/dvb/dmx-qbuf.rst +++ b/Documentation/media/uapi/dvb/dmx-qbuf.rst @@ -51,9 +51,10 @@ out to disk. Buffers remain locked until dequeued, until the the device is closed. Applications call the ``DMX_DQBUF`` ioctl to dequeue a filled -(capturing) buffer from the driver's outgoing queue. They just set the ``reserved`` field array to zero. When ``DMX_DQBUF`` is called with a -pointer to this structure, the driver fills the remaining fields or -returns an error code. +(capturing) buffer from the driver's outgoing queue. +They just set the ``index`` field withe the buffer ID to be queued. +When ``DMX_DQBUF`` is called with a pointer to struct :c:type:`dmx_buffer`, +the driver fills the remaining fields or returns an error code. By default ``DMX_DQBUF`` blocks when no buffer is in the outgoing queue. When the ``O_NONBLOCK`` flag was given to the diff --git a/Documentation/networking/segmentation-offloads.txt b/Documentation/networking/segmentation-offloads.txt index 2f09455a993a..aca542ec125c 100644 --- a/Documentation/networking/segmentation-offloads.txt +++ b/Documentation/networking/segmentation-offloads.txt @@ -13,14 +13,15 @@ The following technologies are described: * Generic Segmentation Offload - GSO * Generic Receive Offload - GRO * Partial Generic Segmentation Offload - GSO_PARTIAL + * SCTP accelleration with GSO - GSO_BY_FRAGS TCP Segmentation Offload ======================== TCP segmentation allows a device to segment a single frame into multiple frames with a data payload size specified in skb_shinfo()->gso_size. -When TCP segmentation requested the bit for either SKB_GSO_TCP or -SKB_GSO_TCP6 should be set in skb_shinfo()->gso_type and +When TCP segmentation requested the bit for either SKB_GSO_TCPV4 or +SKB_GSO_TCPV6 should be set in skb_shinfo()->gso_type and skb_shinfo()->gso_size should be set to a non-zero value. TCP segmentation is dependent on support for the use of partial checksum @@ -49,6 +50,10 @@ datagram into multiple IPv4 fragments. Many of the requirements for UDP fragmentation offload are the same as TSO. However the IPv4 ID for fragments should not increment as a single IPv4 datagram is fragmented. +UFO is deprecated: modern kernels will no longer generate UFO skbs, but can +still receive them from tuntap and similar devices. Offload of UDP-based +tunnel protocols is still supported. + IPIP, SIT, GRE, UDP Tunnel, and Remote Checksum Offloads ======================================================== @@ -83,10 +88,10 @@ SKB_GSO_UDP_TUNNEL_CSUM. These two additional tunnel types reflect the fact that the outer header also requests to have a non-zero checksum included in the outer header. -Finally there is SKB_GSO_REMCSUM which indicates that a given tunnel header -has requested a remote checksum offload. In this case the inner headers -will be left with a partial checksum and only the outer header checksum -will be computed. +Finally there is SKB_GSO_TUNNEL_REMCSUM which indicates that a given tunnel +header has requested a remote checksum offload. In this case the inner +headers will be left with a partial checksum and only the outer header +checksum will be computed. Generic Segmentation Offload ============================ @@ -128,3 +133,38 @@ values for if the header was simply duplicated. The one exception to this is the outer IPv4 ID field. It is up to the device drivers to guarantee that the IPv4 ID field is incremented in the case that a given header does not have the DF bit set. + +SCTP accelleration with GSO +=========================== + +SCTP - despite the lack of hardware support - can still take advantage of +GSO to pass one large packet through the network stack, rather than +multiple small packets. + +This requires a different approach to other offloads, as SCTP packets +cannot be just segmented to (P)MTU. Rather, the chunks must be contained in +IP segments, padding respected. So unlike regular GSO, SCTP can't just +generate a big skb, set gso_size to the fragmentation point and deliver it +to IP layer. + +Instead, the SCTP protocol layer builds an skb with the segments correctly +padded and stored as chained skbs, and skb_segment() splits based on those. +To signal this, gso_size is set to the special value GSO_BY_FRAGS. + +Therefore, any code in the core networking stack must be aware of the +possibility that gso_size will be GSO_BY_FRAGS and handle that case +appropriately. + +There are some helpers to make this easier: + + - skb_is_gso(skb) && skb_is_gso_sctp(skb) is the best way to see if + an skb is an SCTP GSO skb. + + - For size checks, the skb_gso_validate_*_len family of helpers correctly + considers GSO_BY_FRAGS. + + - For manipulating packets, skb_increase_gso_size and skb_decrease_gso_size + will check for GSO_BY_FRAGS and WARN if asked to manipulate these skbs. + +This also affects drivers with the NETIF_F_FRAGLIST & NETIF_F_GSO_SCTP bits +set. Note also that NETIF_F_GSO_SCTP is included in NETIF_F_GSO_SOFTWARE. diff --git a/Documentation/sphinx/kerneldoc.py b/Documentation/sphinx/kerneldoc.py index 39aa9e8697cc..fbedcc39460b 100644 --- a/Documentation/sphinx/kerneldoc.py +++ b/Documentation/sphinx/kerneldoc.py @@ -36,8 +36,7 @@ import glob from docutils import nodes, statemachine from docutils.statemachine import ViewList -from docutils.parsers.rst import directives -from sphinx.util.compat import Directive +from docutils.parsers.rst import directives, Directive from sphinx.ext.autodoc import AutodocReporter __version__ = '1.0' diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 792fa8717d13..d6b3ff51a14f 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -123,14 +123,15 @@ memory layout to fit in user mode), check KVM_CAP_MIPS_VZ and use the flag KVM_VM_MIPS_VZ. -4.3 KVM_GET_MSR_INDEX_LIST +4.3 KVM_GET_MSR_INDEX_LIST, KVM_GET_MSR_FEATURE_INDEX_LIST -Capability: basic +Capability: basic, KVM_CAP_GET_MSR_FEATURES for KVM_GET_MSR_FEATURE_INDEX_LIST Architectures: x86 -Type: system +Type: system ioctl Parameters: struct kvm_msr_list (in/out) Returns: 0 on success; -1 on error Errors: + EFAULT: the msr index list cannot be read from or written to E2BIG: the msr index list is to be to fit in the array specified by the user. @@ -139,16 +140,23 @@ struct kvm_msr_list { __u32 indices[0]; }; -This ioctl returns the guest msrs that are supported. The list varies -by kvm version and host processor, but does not change otherwise. The -user fills in the size of the indices array in nmsrs, and in return -kvm adjusts nmsrs to reflect the actual number of msrs and fills in -the indices array with their numbers. +The user fills in the size of the indices array in nmsrs, and in return +kvm adjusts nmsrs to reflect the actual number of msrs and fills in the +indices array with their numbers. + +KVM_GET_MSR_INDEX_LIST returns the guest msrs that are supported. The list +varies by kvm version and host processor, but does not change otherwise. Note: if kvm indicates supports MCE (KVM_CAP_MCE), then the MCE bank MSRs are not returned in the MSR list, as different vcpus can have a different number of banks, as set via the KVM_X86_SETUP_MCE ioctl. +KVM_GET_MSR_FEATURE_INDEX_LIST returns the list of MSRs that can be passed +to the KVM_GET_MSRS system ioctl. This lets userspace probe host capabilities +and processor features that are exposed via MSRs (e.g., VMX capabilities). +This list also varies by kvm version and host processor, but does not change +otherwise. + 4.4 KVM_CHECK_EXTENSION @@ -475,14 +483,22 @@ Support for this has been removed. Use KVM_SET_GUEST_DEBUG instead. 4.18 KVM_GET_MSRS -Capability: basic +Capability: basic (vcpu), KVM_CAP_GET_MSR_FEATURES (system) Architectures: x86 -Type: vcpu ioctl +Type: system ioctl, vcpu ioctl Parameters: struct kvm_msrs (in/out) -Returns: 0 on success, -1 on error +Returns: number of msrs successfully returned; + -1 on error + +When used as a system ioctl: +Reads the values of MSR-based features that are available for the VM. This +is similar to KVM_GET_SUPPORTED_CPUID, but it returns MSR indices and values. +The list of msr-based features can be obtained using KVM_GET_MSR_FEATURE_INDEX_LIST +in a system ioctl. +When used as a vcpu ioctl: Reads model-specific registers from the vcpu. Supported msr indices can -be obtained using KVM_GET_MSR_INDEX_LIST. +be obtained using KVM_GET_MSR_INDEX_LIST in a system ioctl. struct kvm_msrs { __u32 nmsrs; /* number of msrs in entries */ diff --git a/Documentation/virtual/kvm/cpuid.txt b/Documentation/virtual/kvm/cpuid.txt index dcab6dc11e3b..87a7506f31c2 100644 --- a/Documentation/virtual/kvm/cpuid.txt +++ b/Documentation/virtual/kvm/cpuid.txt @@ -58,6 +58,10 @@ KVM_FEATURE_PV_TLB_FLUSH || 9 || guest checks this feature bit || || before enabling paravirtualized || || tlb flush. ------------------------------------------------------------------------------ +KVM_FEATURE_ASYNC_PF_VMEXIT || 10 || paravirtualized async PF VM exit + || || can be enabled by setting bit 2 + || || when writing to msr 0x4b564d02 +------------------------------------------------------------------------------ KVM_FEATURE_CLOCKSOURCE_STABLE_BIT || 24 || host will warn if no guest-side || || per-cpu warps are expected in || || kvmclock. diff --git a/Documentation/virtual/kvm/msr.txt b/Documentation/virtual/kvm/msr.txt index 1ebecc115dc6..f3f0d57ced8e 100644 --- a/Documentation/virtual/kvm/msr.txt +++ b/Documentation/virtual/kvm/msr.txt @@ -170,7 +170,8 @@ MSR_KVM_ASYNC_PF_EN: 0x4b564d02 when asynchronous page faults are enabled on the vcpu 0 when disabled. Bit 1 is 1 if asynchronous page faults can be injected when vcpu is in cpl == 0. Bit 2 is 1 if asynchronous page faults - are delivered to L1 as #PF vmexits. + are delivered to L1 as #PF vmexits. Bit 2 can be set only if + KVM_FEATURE_ASYNC_PF_VMEXIT is present in CPUID. First 4 byte of 64 byte memory location will be written to by the hypervisor at the time of asynchronous page fault (APF) diff --git a/Documentation/x86/intel_rdt_ui.txt b/Documentation/x86/intel_rdt_ui.txt index 756fd76b78a6..71c30984e94d 100644 --- a/Documentation/x86/intel_rdt_ui.txt +++ b/Documentation/x86/intel_rdt_ui.txt @@ -671,7 +671,7 @@ occupancy of the real time threads on these cores. # mkdir p1 Move the cpus 4-7 over to p1 -# echo f0 > p0/cpus +# echo f0 > p1/cpus View the llc occupancy snapshot diff --git a/Documentation/x86/topology.txt b/Documentation/x86/topology.txt index f3e9d7e9ed6c..2953e3ec9a02 100644 --- a/Documentation/x86/topology.txt +++ b/Documentation/x86/topology.txt @@ -108,7 +108,7 @@ The topology of a system is described in the units of: The number of online threads is also printed in /proc/cpuinfo "siblings." - - topology_sibling_mask(): + - topology_sibling_cpumask(): The cpumask contains all online threads in the core to which a thread belongs. |