summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-05-27 00:05:55 +0400
committerLinus Torvalds <torvalds@linux-foundation.org>2012-05-27 00:05:55 +0400
commit30b842889eea1bea02dff55b13d2ddf07a46ce78 (patch)
tree827d96b61384d5fe22ed7aeba02b34026648046e /Documentation
parent84a442b9a16ee69243ce7fce5d6f6f9c3fbdee68 (diff)
parent820f3dd7964f1889baaaaa0c2ba45d05bb619f66 (diff)
downloadlinux-30b842889eea1bea02dff55b13d2ddf07a46ce78.tar.xz
Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm-soc: soc specific changes (part 2) from Olof Johansson: "This adds support for the spear13xx platform, which has first been under review a long time ago and finally been completed after generic spear work has gone into the clock, dt and pinctrl branches. Also a number of updates for the samsung socs are part of this branch." Fix up trivial conflicts in drivers/gpio/gpio-samsung.c that look much worse than they are: the exonys5 init code was refactored in commit fd454997d687 ("gpio: samsung: refactor gpiolib init for exynos4/5"), and then commit f10590c9836c ("ARM: EXYNOS: add GPC4 bank instance") added a new gpio chip define and did tiny updates to the init code. So the conflict diff looks like hell, but it's actually a fairly simple change. * tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits) ARM: exynos: fix building with CONFIG_OF disabled ARM: EXYNOS: Add AUXDATA for i2c controllers ARM: dts: Update device tree source files for EXYNOS5250 ARM: EXYNOS: Add device tree support for interrupt combiner ARM: EXYNOS: Add irq_domain support for interrupt combiner ARM: EXYNOS: Remove a new bus_type instance for EXYNOS5 ARM: EXYNOS: update irqs for EXYNOS5250 SoC ARM: EXYNOS: Add pre-divider and fout mux clocks for bpll and mpll ARM: EXYNOS: add GPC4 bank instance ARM: EXYNOS: Redefine IRQ_MCT_L0,1 definition ARM: EXYNOS: Modify the GIC physical address for static io-mapping ARM: EXYNOS: Add watchdog timer clock instance pinctrl: SPEAr1310: Fix pin numbers for clcd_high_res SPEAr: Update MAINTAINERS and Documentation SPEAr13xx: Add defconfig SPEAr13xx: Add compilation support SPEAr13xx: Add dts and dtsi files pinctrl: Add SPEAr13xx pinctrl drivers pinctrl: SPEAr: Create macro for declaring GPIO PINS SPEAr13xx: Add common clock framework support ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/arm/SPEAr/overview.txt32
-rw-r--r--Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt52
-rw-r--r--Documentation/devicetree/bindings/arm/spear.txt14
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt47
4 files changed, 123 insertions, 22 deletions
diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt
index 28a9af953b9d..57aae7765c74 100644
--- a/Documentation/arm/SPEAr/overview.txt
+++ b/Documentation/arm/SPEAr/overview.txt
@@ -8,9 +8,8 @@ Introduction
weblink : http://www.st.com/spear
The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are
- supported by the 'spear' platform of ARM Linux. Currently SPEAr300,
- SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. Support for the SPEAr13XX
- series is in progress.
+ supported by the 'spear' platform of ARM Linux. Currently SPEAr1310,
+ SPEAr1340, SPEAr300, SPEAr310, SPEAr320 and SPEAr600 SOCs are supported.
Hierarchy in SPEAr is as follows:
@@ -26,33 +25,36 @@ Introduction
- SPEAr600 (SOC)
- SPEAr600 Evaluation Board
- SPEAr13XX (13XX SOC series, based on ARM CORTEXA9)
- - SPEAr1300 (SOC)
+ - SPEAr1310 (SOC)
+ - SPEAr1310 Evaluation Board
+ - SPEAr1340 (SOC)
+ - SPEAr1340 Evaluation Board
Configuration
-------------
A generic configuration is provided for each machine, and can be used as the
default by
- make spear600_defconfig
- make spear300_defconfig
- make spear310_defconfig
- make spear320_defconfig
+ make spear13xx_defconfig
+ make spear3xx_defconfig
+ make spear6xx_defconfig
Layout
------
- The common files for multiple machine families (SPEAr3XX, SPEAr6XX and
- SPEAr13XX) are located in the platform code contained in arch/arm/plat-spear
+ The common files for multiple machine families (SPEAr3xx, SPEAr6xx and
+ SPEAr13xx) are located in the platform code contained in arch/arm/plat-spear
with headers in plat/.
Each machine series have a directory with name arch/arm/mach-spear followed by
series name. Like mach-spear3xx, mach-spear6xx and mach-spear13xx.
- Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for
- spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine
- specific files, like spear300.c, spear310.c, spear320.c and spear600.c.
- mach-spear* doesn't contains board specific files as they fully support
- Flattened Device Tree.
+ Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c, for
+ spear6xx is mach-spear6xx/spear6xx.c and for spear13xx family is
+ mach-spear13xx/spear13xx.c. mach-spear* also contain soc/machine specific
+ files, like spear1310.c, spear1340.c spear300.c, spear310.c, spear320.c and
+ spear600.c. mach-spear* doesn't contains board specific files as they fully
+ support Flattened Device Tree.
Document Author
diff --git a/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt b/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt
new file mode 100644
index 000000000000..f2f2171e530e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt
@@ -0,0 +1,52 @@
+* Samsung Exynos Interrupt Combiner Controller
+
+Samsung's Exynos4 architecture includes a interrupt combiner controller which
+can combine interrupt sources as a group and provide a single interrupt request
+for the group. The interrupt request from each group are connected to a parent
+interrupt controller, such as GIC in case of Exynos4210.
+
+The interrupt combiner controller consists of multiple combiners. Upto eight
+interrupt sources can be connected to a combiner. The combiner outputs one
+combined interrupt for its eight interrupt sources. The combined interrupt
+is usually connected to a parent interrupt controller.
+
+A single node in the device tree is used to describe the interrupt combiner
+controller module (which includes multiple combiners). A combiner in the
+interrupt controller module shares config/control registers with other
+combiners. For example, a 32-bit interrupt enable/disable config register
+can accommodate upto 4 interrupt combiners (with each combiner supporting
+upto 8 interrupt sources).
+
+Required properties:
+- compatible: should be "samsung,exynos4210-combiner".
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt-cells: should be <2>. The meaning of the cells are
+ * First Cell: Combiner Group Number.
+ * Second Cell: Interrupt number within the group.
+- reg: Base address and size of interrupt combiner registers.
+- interrupts: The list of interrupts generated by the combiners which are then
+ connected to a parent interrupt controller. The format of the interrupt
+ specifier depends in the interrupt parent controller.
+
+Optional properties:
+- samsung,combiner-nr: The number of interrupt combiners supported. If this
+ property is not specified, the default number of combiners is assumed
+ to be 16.
+- interrupt-parent: pHandle of the parent interrupt controller, if not
+ inherited from the parent node.
+
+
+Example:
+
+ The following is a an example from the Exynos4210 SoC dtsi file.
+
+ combiner:interrupt-controller@10440000 {
+ compatible = "samsung,exynos4210-combiner";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x10440000 0x1000>;
+ interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+ <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+ <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+ <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/spear.txt b/Documentation/devicetree/bindings/arm/spear.txt
index aa5f355cc947..0d42949df6c2 100644
--- a/Documentation/devicetree/bindings/arm/spear.txt
+++ b/Documentation/devicetree/bindings/arm/spear.txt
@@ -2,25 +2,25 @@ ST SPEAr Platforms Device Tree Bindings
---------------------------------------
Boards with the ST SPEAr600 SoC shall have the following properties:
-
Required root node property:
-
compatible = "st,spear600";
Boards with the ST SPEAr300 SoC shall have the following properties:
-
Required root node property:
-
compatible = "st,spear300";
Boards with the ST SPEAr310 SoC shall have the following properties:
-
Required root node property:
-
compatible = "st,spear310";
Boards with the ST SPEAr320 SoC shall have the following properties:
+Required root node property:
+compatible = "st,spear320";
+Boards with the ST SPEAr1310 SoC shall have the following properties:
Required root node property:
+compatible = "st,spear1310";
-compatible = "st,spear320";
+Boards with the ST SPEAr1340 SoC shall have the following properties:
+Required root node property:
+compatible = "st,spear1340";
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt
index 3664d37e6799..b4480d5c3aca 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt
@@ -4,6 +4,8 @@ Required properties:
- compatible : "st,spear300-pinmux"
: "st,spear310-pinmux"
: "st,spear320-pinmux"
+ : "st,spear1310-pinmux"
+ : "st,spear1340-pinmux"
- reg : Address range of the pinctrl registers
- st,pinmux-mode: Mandatory for SPEAr300 and SPEAr320 and invalid for others.
- Its values for SPEAr300:
@@ -89,6 +91,37 @@ For SPEAr320 machines:
"rmii0_1_grp", "i2c1_8_9_grp", "i2c1_98_99_grp", "i2c2_0_1_grp",
"i2c2_2_3_grp", "i2c2_19_20_grp", "i2c2_75_76_grp", "i2c2_96_97_grp"
+For SPEAr1310 machines:
+ "i2c0_grp", "ssp0_grp", "ssp0_cs0_grp", "ssp0_cs1_2_grp", "i2s0_grp",
+ "i2s1_grp", "clcd_grp", "clcd_high_res_grp", "arm_gpio_grp",
+ "smi_2_chips_grp", "smi_4_chips_grp", "gmii_grp", "rgmii_grp",
+ "smii_0_1_2_grp", "ras_mii_txclk_grp", "nand_8bit_grp",
+ "nand_16bit_grp", "nand_4_chips_grp", "keyboard_6x6_grp",
+ "keyboard_rowcol6_8_grp", "uart0_grp", "uart0_modem_grp",
+ "gpt0_tmr0_grp", "gpt0_tmr1_grp", "gpt1_tmr0_grp", "gpt1_tmr1_grp",
+ "sdhci_grp", "cf_grp", "xd_grp", "touch_xy_grp",
+ "uart1_disable_i2c_grp", "uart1_disable_sd_grp", "uart2_3_grp",
+ "uart4_grp", "uart5_grp", "rs485_0_1_tdm_0_1_grp", "i2c_1_2_grp",
+ "i2c3_dis_smi_clcd_grp", "i2c3_dis_sd_i2s0_grp", "i2c_4_5_dis_smi_grp",
+ "i2c4_dis_sd_grp", "i2c5_dis_sd_grp", "i2c_6_7_dis_kbd_grp",
+ "i2c6_dis_sd_grp", "i2c7_dis_sd_grp", "can0_dis_nor_grp",
+ "can0_dis_sd_grp", "can1_dis_sd_grp", "can1_dis_kbd_grp", "pcie0_grp",
+ "pcie1_grp", "pcie2_grp", "sata0_grp", "sata1_grp", "sata2_grp",
+ "ssp1_dis_kbd_grp", "ssp1_dis_sd_grp", "gpt64_grp"
+
+For SPEAr1340 machines:
+ "pads_as_gpio_grp", "fsmc_8bit_grp", "fsmc_16bit_grp", "fsmc_pnor_grp",
+ "keyboard_row_col_grp", "keyboard_col5_grp", "spdif_in_grp",
+ "spdif_out_grp", "gpt_0_1_grp", "pwm0_grp", "pwm1_grp", "pwm2_grp",
+ "pwm3_grp", "vip_mux_grp", "vip_mux_cam0_grp", "vip_mux_cam1_grp",
+ "vip_mux_cam2_grp", "vip_mux_cam3_grp", "cam0_grp", "cam1_grp",
+ "cam2_grp", "cam3_grp", "smi_grp", "ssp0_grp", "ssp0_cs1_grp",
+ "ssp0_cs2_grp", "ssp0_cs3_grp", "uart0_grp", "uart0_enh_grp",
+ "uart1_grp", "i2s_in_grp", "i2s_out_grp", "gmii_grp", "rgmii_grp",
+ "rmii_grp", "sgmii_grp", "i2c0_grp", "i2c1_grp", "cec0_grp", "cec1_grp",
+ "sdhci_grp", "cf_grp", "xd_grp", "clcd_grp", "arm_trace_grp",
+ "miphy_dbg_grp", "pcie_grp", "sata_grp"
+
Valid values for function names are:
For All SPEAr3xx machines:
"firda", "i2c0", "ssp_cs", "ssp0", "mii0", "gpio0", "uart0_ext",
@@ -106,3 +139,17 @@ For SPEAr320 machines:
"uart2", "uart3", "uart4", "uart5", "uart6", "rs485", "touchscreen",
"can0", "can1", "pwm0_1", "pwm2", "pwm3", "ssp1", "ssp2", "mii2",
"mii0_1", "i2c1", "i2c2"
+
+
+For SPEAr1310 machines:
+ "i2c0", "ssp0", "i2s0", "i2s1", "clcd", "arm_gpio", "smi", "gmii",
+ "rgmii", "smii_0_1_2", "ras_mii_txclk", "nand", "keyboard", "uart0",
+ "gpt0", "gpt1", "sdhci", "cf", "xd", "touchscreen", "uart1", "uart2_3",
+ "uart4", "uart5", "rs485_0_1_tdm_0_1", "i2c_1_2", "i2c3_i2s1",
+ "i2c_4_5", "i2c_6_7", "can0", "can1", "pci", "sata", "ssp1", "gpt64"
+
+For SPEAr1340 machines:
+ "pads_as_gpio", "fsmc", "keyboard", "spdif_in", "spdif_out", "gpt_0_1",
+ "pwm", "vip", "cam0", "cam1", "cam2", "cam3", "smi", "ssp0", "uart0",
+ "uart1", "i2s", "gmac", "i2c0", "i2c1", "cec0", "cec1", "sdhci", "cf",
+ "xd", "clcd", "arm_trace", "miphy_dbg", "pcie", "sata"