diff options
| author | Paolo Bonzini <pbonzini@redhat.com> | 2023-02-15 20:33:28 +0300 |
|---|---|---|
| committer | Paolo Bonzini <pbonzini@redhat.com> | 2023-02-15 20:33:28 +0300 |
| commit | 33436335e93a1788a58443fc99c5ab320ce4b9d9 (patch) | |
| tree | d92f88768c8dbd00f8b65164f47a8a091768b95a /Documentation | |
| parent | 27b025ebb0f6092d5c0a88de2ab73545bc1c496e (diff) | |
| parent | c39cea6f38eefe356d64d0bc1e1f2267e282cdd3 (diff) | |
| download | linux-33436335e93a1788a58443fc99c5ab320ce4b9d9.tar.xz | |
Merge tag 'kvm-riscv-6.3-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 6.3
- Fix wrong usage of PGDIR_SIZE to check page sizes
- Fix privilege mode setting in kvm_riscv_vcpu_trap_redirect()
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
Diffstat (limited to 'Documentation')
39 files changed, 209 insertions, 73 deletions
diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst index c8ae7c897f14..74cec76be9f2 100644 --- a/Documentation/admin-guide/cgroup-v2.rst +++ b/Documentation/admin-guide/cgroup-v2.rst @@ -1245,13 +1245,17 @@ PAGE_SIZE multiple when read back. This is a simple interface to trigger memory reclaim in the target cgroup. - This file accepts a string which contains the number of bytes to - reclaim. + This file accepts a single key, the number of bytes to reclaim. + No nested keys are currently supported. Example:: echo "1G" > memory.reclaim + The interface can be later extended with nested keys to + configure the reclaim behavior. For example, specify the + type of memory to reclaim from (anon, file, ..). + Please note that the kernel can over or under reclaim from the target cgroup. If less bytes are reclaimed than the specified amount, -EAGAIN is returned. @@ -1263,13 +1267,6 @@ PAGE_SIZE multiple when read back. This means that the networking layer will not adapt based on reclaim induced by memory.reclaim. - This file also allows the user to specify the nodes to reclaim from, - via the 'nodes=' key, for example:: - - echo "1G nodes=0,1" > memory.reclaim - - The above instructs the kernel to reclaim memory from nodes 0,1. - memory.peak A read-only single value file which exists on non-root cgroups. diff --git a/Documentation/admin-guide/mm/zswap.rst b/Documentation/admin-guide/mm/zswap.rst index f67de481c7f6..6dd74a18268b 100644 --- a/Documentation/admin-guide/mm/zswap.rst +++ b/Documentation/admin-guide/mm/zswap.rst @@ -70,9 +70,7 @@ e.g. ``zswap.zpool=zbud``. It can also be changed at runtime using the sysfs The zbud type zpool allocates exactly 1 page to store 2 compressed pages, which means the compression ratio will always be 2:1 or worse (because of half-full zbud pages). The zsmalloc type zpool has a more complex compressed page -storage method, and it can achieve greater storage densities. However, -zsmalloc does not implement compressed page eviction, so once zswap fills it -cannot evict the oldest page, it can only reject new pages. +storage method, and it can achieve greater storage densities. When a swap page is passed from frontswap to zswap, zswap maintains a mapping of the swap entry, a combination of the swap type and swap offset, to the zpool diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst index 808ade4cc008..ec5f889d7681 100644 --- a/Documentation/arm64/silicon-errata.rst +++ b/Documentation/arm64/silicon-errata.rst @@ -120,6 +120,8 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A710 | #2224489 | ARM64_ERRATUM_2224489 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A715 | #2645198 | ARM64_ERRATUM_2645198 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-X2 | #2119858 | ARM64_ERRATUM_2119858 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-X2 | #2224489 | ARM64_ERRATUM_2224489 | diff --git a/Documentation/conf.py b/Documentation/conf.py index a5c45df0bd83..d927737e3c10 100644 --- a/Documentation/conf.py +++ b/Documentation/conf.py @@ -31,6 +31,12 @@ def have_command(cmd): # Get Sphinx version major, minor, patch = sphinx.version_info[:3] +# +# Warn about older versions that we don't want to support for much +# longer. +# +if (major < 2) or (major == 2 and minor < 4): + print('WARNING: support for Sphinx < 2.4 will be removed soon.') # If extensions (or modules to document with autodoc) are in another directory, # add these directories to sys.path here. If the directory is relative to the @@ -339,7 +345,11 @@ html_use_smartypants = False # Custom sidebar templates, maps document names to template names. # Note that the RTD theme ignores this -html_sidebars = { '**': ["about.html", 'searchbox.html', 'localtoc.html', 'sourcelink.html']} +html_sidebars = { '**': ['searchbox.html', 'localtoc.html', 'sourcelink.html']} + +# about.html is available for alabaster theme. Add it at the front. +if html_theme == 'alabaster': + html_sidebars['**'].insert(0, 'about.html') # Output file base name for HTML help builder. htmlhelp_basename = 'TheLinuxKerneldoc' diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml index 903b31129f01..99e159bc5fb1 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml @@ -54,6 +54,17 @@ properties: - const: xo - const: alternate + interrupts: + minItems: 1 + maxItems: 3 + + interrupt-names: + minItems: 1 + items: + - const: dcvsh-irq-0 + - const: dcvsh-irq-1 + - const: dcvsh-irq-2 + '#freq-domain-cells': const: 1 diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml index 0ccaab16dc61..0b7383b3106b 100644 --- a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml +++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Atmel Advanced Encryption Standard (AES) HW cryptographic accelerator maintainers: - - Tudor Ambarus <tudor.ambarus@microchip.com> + - Tudor Ambarus <tudor.ambarus@linaro.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml index 5163c51b4547..ee2ffb034325 100644 --- a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml +++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Atmel Secure Hash Algorithm (SHA) HW cryptographic accelerator maintainers: - - Tudor Ambarus <tudor.ambarus@microchip.com> + - Tudor Ambarus <tudor.ambarus@linaro.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml index fcc5adf03cad..3d6ed24b1b00 100644 --- a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml +++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Atmel Triple Data Encryption Standard (TDES) HW cryptographic accelerator maintainers: - - Tudor Ambarus <tudor.ambarus@microchip.com> + - Tudor Ambarus <tudor.ambarus@linaro.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index f2c143730a55..6e2fd6e9fa7f 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -32,7 +32,7 @@ properties: - description: Display byte clock - description: Display byte interface clock - description: Display pixel clock - - description: Display escape clock + - description: Display core clock - description: Display AHB clock - description: Display AXI clock @@ -137,8 +137,6 @@ required: - phys - assigned-clocks - assigned-clock-parents - - power-domains - - operating-points-v2 - ports additionalProperties: false diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml index d9ad8b659f58..3ec466c3ab38 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml @@ -69,7 +69,6 @@ required: - compatible - reg - reg-names - - vdds-supply unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml index 819de5ce0bc9..a43e11d3b00d 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml @@ -39,7 +39,6 @@ required: - compatible - reg - reg-names - - vcca-supply unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml index 3d8540a06fe2..2f1fd140c87d 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml @@ -34,6 +34,10 @@ properties: vddio-supply: description: Phandle to vdd-io regulator device node. + qcom,dsi-phy-regulator-ldo-mode: + type: boolean + description: Indicates if the LDO mode PHY regulator is wanted. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml index d6f043a4b08d..4795e13c7b59 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml @@ -72,7 +72,7 @@ examples: #include <dt-bindings/interconnect/qcom,qcm2290.h> #include <dt-bindings/power/qcom-rpmpd.h> - mdss@5e00000 { + display-subsystem@5e00000 { #address-cells = <1>; #size-cells = <1>; compatible = "qcom,qcm2290-mdss"; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml index a86d7f53fa84..886858ef6700 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml @@ -62,7 +62,7 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> - mdss@5e00000 { + display-subsystem@5e00000 { #address-cells = <1>; #size-cells = <1>; compatible = "qcom,sm6115-mdss"; diff --git a/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml b/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml index c46378efc123..92e899905ef8 100644 --- a/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml +++ b/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml @@ -16,7 +16,7 @@ properties: compatible: items: - enum: - - renesas,i2c-r9a09g011 # RZ/V2M + - renesas,r9a09g011-i2c # RZ/V2M - const: renesas,rzv2m-i2c reg: @@ -66,7 +66,7 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> i2c0: i2c@a4030000 { - compatible = "renesas,i2c-r9a09g011", "renesas,rzv2m-i2c"; + compatible = "renesas,r9a09g011-i2c", "renesas,rzv2m-i2c"; reg = <0xa4030000 0x80>; interrupts = <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml index 4b37aa88a375..5e6be4e79201 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml @@ -84,7 +84,6 @@ allOf: - qcom,msm8939-pcnoc - qcom,msm8939-snoc - qcom,msm8996-a1noc - - qcom,msm8996-a2noc - qcom,msm8996-bimc - qcom,msm8996-cnoc - qcom,msm8996-pnoc @@ -191,6 +190,29 @@ allOf: compatible: contains: enum: + - qcom,msm8996-a2noc + + then: + properties: + clock-names: + items: + - const: bus + - const: bus_a + - const: aggre2_ufs_axi + - const: ufs_axi + + clocks: + items: + - description: Bus Clock + - description: Bus A Clock + - description: Aggregate2 NoC UFS AXI Clock + - description: UFS AXI Clock + + - if: + properties: + compatible: + contains: + enum: - qcom,sdm660-a2noc then: diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml index f3a5fbabbbb5..bb01c6b34dab 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml @@ -2,7 +2,7 @@ # Copyright 2019 BayLibre, SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb2-phy.yaml#" +$id: "http://devicetree.org/schemas/phy/amlogic,g12a-usb2-phy.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic G12A USB2 PHY @@ -13,8 +13,8 @@ maintainers: properties: compatible: enum: - - amlogic,meson-g12a-usb2-phy - - amlogic,meson-a1-usb2-phy + - amlogic,g12a-usb2-phy + - amlogic,a1-usb2-phy reg: maxItems: 1 @@ -68,7 +68,7 @@ additionalProperties: false examples: - | phy@36000 { - compatible = "amlogic,meson-g12a-usb2-phy"; + compatible = "amlogic,g12a-usb2-phy"; reg = <0x36000 0x2000>; clocks = <&xtal>; clock-names = "xtal"; diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml index 868b4e6fde71..129d26e99776 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml @@ -2,7 +2,7 @@ # Copyright 2019 BayLibre, SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml#" +$id: "http://devicetree.org/schemas/phy/amlogic,g12a-usb3-pcie-phy.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Amlogic G12A USB3 + PCIE Combo PHY @@ -13,7 +13,7 @@ maintainers: properties: compatible: enum: - - amlogic,meson-g12a-usb3-pcie-phy + - amlogic,g12a-usb3-pcie-phy reg: maxItems: 1 @@ -49,7 +49,7 @@ additionalProperties: false examples: - | phy@46000 { - compatible = "amlogic,meson-g12a-usb3-pcie-phy"; + compatible = "amlogic,g12a-usb3-pcie-phy"; reg = <0x46000 0x2000>; clocks = <&ref_clk>; clock-names = "ref_clk"; diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml index abcc4373f39e..ca6a0836b53c 100644 --- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml @@ -16,7 +16,6 @@ properties: compatible: enum: - qcom,usb-hs-28nm-femtophy - - qcom,usb-hs-28nm-mdm9607 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml index 01f9d4e236e9..a7feb497eb89 100644 --- a/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml @@ -19,8 +19,8 @@ description: | additional information and example. patternProperties: - # 25 LDOs - "^LDO([1-9]|[1][0-9]|2[0-5])$": + # 25 LDOs, without LDO10-12 + "^LDO([1-9]|1[3-9]|2[0-5])$": type: object $ref: regulator.yaml# unevaluatedProperties: false @@ -30,6 +30,23 @@ patternProperties: required: - regulator-name + "^LDO(1[0-2])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single LDO regulator. + + properties: + samsung,ext-control-gpios: + maxItems: 1 + description: + LDO10, LDO11 and LDO12 can be configured to external control over + GPIO. + + required: + - regulator-name + # 5 bucks "^BUCK[1-5]$": type: object diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index c6720764e765..a2884e3113da 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -83,7 +83,7 @@ properties: insensitive, letters in the riscv,isa string must be all lowercase to simplify parsing. $ref: "/schemas/types.yaml#/definitions/string" - pattern: ^rv(?:64|32)imaf?d?q?c?b?v?k?h?(?:_[hsxz](?:[a-z])+)*$ + pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[a-z])+)?(?:_[hsxz](?:[a-z])+)*$ # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here timebase-frequency: false diff --git a/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml b/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml index 0a7aa29563c1..21c8ea08ff0a 100644 --- a/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml @@ -40,6 +40,8 @@ properties: description: Indicates that the setting of RTC time is allowed by the host CPU. + wakeup-source: true + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml index 290555426c39..bdf482db32aa 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml @@ -39,8 +39,8 @@ properties: qcom,protection-domain: $ref: /schemas/types.yaml#/definitions/string-array description: | - Protection domain service name and path for APR service - possible values are:: + Protection domain service name and path for APR service (if supported). + Possible values are:: "avs/audio", "msm/adsp/audio_pd". "kernel/elf_loader", "msm/modem/wlan_pd". "tms/servreg", "msm/adsp/audio_pd". @@ -49,6 +49,5 @@ properties: required: - reg - - qcom,protection-domain additionalProperties: true diff --git a/Documentation/devicetree/bindings/sound/everest,es8326.yaml b/Documentation/devicetree/bindings/sound/everest,es8326.yaml index 07781408e788..07781408e788 100755..100644 --- a/Documentation/devicetree/bindings/sound/everest,es8326.yaml +++ b/Documentation/devicetree/bindings/sound/everest,es8326.yaml diff --git a/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml b/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml index 9d3139990237..aa23b0024c46 100644 --- a/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml +++ b/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml @@ -16,6 +16,7 @@ properties: compatible: enum: - mediatek,mt8186-mt6366-rt1019-rt5682s-sound + - mediatek,mt8186-mt6366-rt5682s-max98360-sound mediatek,platform: $ref: "/schemas/types.yaml#/definitions/phandle" diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml index 66431aade3b7..da5f70910da5 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml @@ -30,7 +30,9 @@ properties: const: 0 clocks: - maxItems: 5 + oneOf: + - maxItems: 3 + - maxItems: 5 clock-names: oneOf: diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml index 2bf8d082f8f1..66cbb1f5e31a 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml @@ -9,9 +9,6 @@ title: LPASS(Low Power Audio Subsystem) VA Macro audio codec maintainers: - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> -allOf: - - $ref: dai-common.yaml# - properties: compatible: enum: @@ -30,15 +27,12 @@ properties: const: 0 clocks: - maxItems: 5 + minItems: 5 + maxItems: 6 clock-names: - items: - - const: mclk - - const: npl - - const: macro - - const: dcodec - - const: fsgen + minItems: 5 + maxItems: 6 clock-output-names: maxItems: 1 @@ -55,10 +49,51 @@ required: - reg - "#sound-dai-cells" +allOf: + - $ref: dai-common.yaml# + + - if: + properties: + compatible: + enum: + - qcom,sc7280-lpass-wsa-macro + - qcom,sm8450-lpass-wsa-macro + - qcom,sc8280xp-lpass-wsa-macro + then: + properties: + clocks: + maxItems: 5 + clock-names: + items: + - const: mclk + - const: npl + - const: macro + - const: dcodec + - const: fsgen + + - if: + properties: + compatible: + enum: + - qcom,sm8250-lpass-wsa-macro + then: + properties: + clocks: + minItems: 6 + clock-names: + items: + - const: mclk + - const: npl + - const: macro + - const: dcodec + - const: va + - const: fsgen + unevaluatedProperties: false examples: - | + #include <dt-bindings/clock/qcom,sm8250-lpass-aoncc.h> #include <dt-bindings/sound/qcom,q6afe.h> codec@3240000 { compatible = "qcom,sm8250-lpass-wsa-macro"; @@ -69,7 +104,8 @@ examples: <&audiocc 0>, <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&aoncc LPASS_CDC_VA_MCLK>, <&vamacro>; - clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; + clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen"; clock-output-names = "mclk"; }; diff --git a/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml index 4dd973e341e6..6c57dd6c3a36 100644 --- a/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml +++ b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Atmel SPI device maintainers: - - Tudor Ambarus <tudor.ambarus@microchip.com> + - Tudor Ambarus <tudor.ambarus@linaro.org> allOf: - $ref: spi-controller.yaml# diff --git a/Documentation/devicetree/bindings/spi/atmel,quadspi.yaml b/Documentation/devicetree/bindings/spi/atmel,quadspi.yaml index 1d493add4053..b0d99bc10535 100644 --- a/Documentation/devicetree/bindings/spi/atmel,quadspi.yaml +++ b/Documentation/devicetree/bindings/spi/atmel,quadspi.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Atmel Quad Serial Peripheral Interface (QSPI) maintainers: - - Tudor Ambarus <tudor.ambarus@microchip.com> + - Tudor Ambarus <tudor.ambarus@linaro.org> allOf: - $ref: spi-controller.yaml# diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml index ead2cccf658f..9a60c0664bbe 100644 --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml @@ -44,9 +44,9 @@ properties: description: Maximum SPI clocking speed of the device in Hz. - spi-cs-setup-ns: + spi-cs-setup-delay-ns: description: - Delay in nanosecods to be introduced by the controller after CS is + Delay in nanoseconds to be introduced by the controller after CS is asserted. spi-rx-bus-width: diff --git a/Documentation/filesystems/erofs.rst b/Documentation/filesystems/erofs.rst index 067fd1670b1f..a43aacf1494e 100644 --- a/Documentation/filesystems/erofs.rst +++ b/Documentation/filesystems/erofs.rst @@ -120,6 +120,8 @@ dax={always,never} Use direct access (no page cache). See dax A legacy option which is an alias for ``dax=always``. device=%s Specify a path to an extra device to be used together. fsid=%s Specify a filesystem image ID for Fscache back-end. +domain_id=%s Specify a domain ID in fscache mode so that different images + with the same blobs under a given domain ID can share storage. =================== ========================================================= Sysfs Entries diff --git a/Documentation/kbuild/makefiles.rst b/Documentation/kbuild/makefiles.rst index 6b7368d1f516..38bc74eaa547 100644 --- a/Documentation/kbuild/makefiles.rst +++ b/Documentation/kbuild/makefiles.rst @@ -1042,7 +1042,7 @@ $(clean-files). When executing "make clean", the file "crc32table.h" will be deleted. Kbuild will assume files to be in the same relative directory as the -Makefile, except if prefixed with $(objtree). +Makefile. To exclude certain files or directories from make clean, use the $(no-clean-files) variable. diff --git a/Documentation/networking/bridge.rst b/Documentation/networking/bridge.rst index 4aef9cddde2f..c859f3c1636e 100644 --- a/Documentation/networking/bridge.rst +++ b/Documentation/networking/bridge.rst @@ -8,7 +8,7 @@ In order to use the Ethernet bridging functionality, you'll need the userspace tools. Documentation for Linux bridging is on: - http://www.linuxfoundation.org/collaborate/workgroups/networking/bridge + https://wiki.linuxfoundation.org/networking/bridge The bridge-utilities are maintained at: git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/bridge-utils.git diff --git a/Documentation/networking/device_drivers/ethernet/intel/ice.rst b/Documentation/networking/device_drivers/ethernet/intel/ice.rst index dc2e60ced927..b481b81f3be5 100644 --- a/Documentation/networking/device_drivers/ethernet/intel/ice.rst +++ b/Documentation/networking/device_drivers/ethernet/intel/ice.rst @@ -819,7 +819,7 @@ NAPI ---- This driver supports NAPI (Rx polling mode). For more information on NAPI, see -https://www.linuxfoundation.org/collaborate/workgroups/networking/napi +https://wiki.linuxfoundation.org/networking/napi MACVLAN diff --git a/Documentation/networking/nf_conntrack-sysctl.rst b/Documentation/networking/nf_conntrack-sysctl.rst index 49db1d11d7c4..8b1045c3b59e 100644 --- a/Documentation/networking/nf_conntrack-sysctl.rst +++ b/Documentation/networking/nf_conntrack-sysctl.rst @@ -173,7 +173,9 @@ nf_conntrack_sctp_timeout_cookie_echoed - INTEGER (seconds) default 3 nf_conntrack_sctp_timeout_established - INTEGER (seconds) - default 432000 (5 days) + default 210 + + Default is set to (hb_interval * path_max_retrans + rto_max) nf_conntrack_sctp_timeout_shutdown_sent - INTEGER (seconds) default 0.3 @@ -190,12 +192,6 @@ nf_conntrack_sctp_timeout_heartbeat_sent - INTEGER (seconds) This timeout is used to setup conntrack entry on secondary paths. Default is set to hb_interval. -nf_conntrack_sctp_timeout_heartbeat_acked - INTEGER (seconds) - default 210 - - This timeout is used to setup conntrack entry on secondary paths. - Default is set to (hb_interval * path_max_retrans + rto_max) - nf_conntrack_udp_timeout - INTEGER (seconds) default 30 diff --git a/Documentation/networking/rxrpc.rst b/Documentation/networking/rxrpc.rst index 39494a6ea739..e1af54424192 100644 --- a/Documentation/networking/rxrpc.rst +++ b/Documentation/networking/rxrpc.rst @@ -880,8 +880,8 @@ The kernel interface functions are as follows: notify_end_rx can be NULL or it can be used to specify a function to be called when the call changes state to end the Tx phase. This function is - called with the call-state spinlock held to prevent any reply or final ACK - from being delivered first. + called with a spinlock held to prevent the last DATA packet from being + transmitted until the function returns. (#) Receive data from a call:: diff --git a/Documentation/sphinx/load_config.py b/Documentation/sphinx/load_config.py index eeb394b39e2c..8b416bfd75ac 100644 --- a/Documentation/sphinx/load_config.py +++ b/Documentation/sphinx/load_config.py @@ -3,7 +3,7 @@ import os import sys -from sphinx.util.pycompat import execfile_ +from sphinx.util.osutil import fs_encoding # ------------------------------------------------------------------------------ def loadConfig(namespace): @@ -48,7 +48,9 @@ def loadConfig(namespace): sys.stdout.write("load additional sphinx-config: %s\n" % config_file) config = namespace.copy() config['__file__'] = config_file - execfile_(config_file, config) + with open(config_file, 'rb') as f: + code = compile(f.read(), fs_encoding, 'exec') + exec(code, config) del config['__file__'] namespace.update(config) else: diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst index 83e3acc9e321..1b1f721e3fd9 100644 --- a/Documentation/virt/kvm/api.rst +++ b/Documentation/virt/kvm/api.rst @@ -8134,9 +8134,13 @@ considering the state as complete. VMM needs to ensure that the dirty state is final and avoid missing dirty pages from another ioctl ordered after the bitmap collection. -NOTE: One example of using the backup bitmap is saving arm64 vgic/its -tables through KVM_DEV_ARM_{VGIC_GRP_CTRL, ITS_SAVE_TABLES} command on -KVM device "kvm-arm-vgic-its" when dirty ring is enabled. +NOTE: Multiple examples of using the backup bitmap: (1) save vgic/its +tables through command KVM_DEV_ARM_{VGIC_GRP_CTRL, ITS_SAVE_TABLES} on +KVM device "kvm-arm-vgic-its". (2) restore vgic/its tables through +command KVM_DEV_ARM_{VGIC_GRP_CTRL, ITS_RESTORE_TABLES} on KVM device +"kvm-arm-vgic-its". VGICv3 LPI pending status is restored. (3) save +vgic3 pending table through KVM_DEV_ARM_VGIC_{GRP_CTRL, SAVE_PENDING_TABLES} +command on KVM device "kvm-arm-vgic-v3". 8.30 KVM_CAP_XEN_HVM -------------------- diff --git a/Documentation/x86/amd-memory-encryption.rst b/Documentation/x86/amd-memory-encryption.rst index a1940ebe7be5..934310ce7258 100644 --- a/Documentation/x86/amd-memory-encryption.rst +++ b/Documentation/x86/amd-memory-encryption.rst @@ -95,3 +95,39 @@ by supplying mem_encrypt=on on the kernel command line. However, if BIOS does not enable SME, then Linux will not be able to activate memory encryption, even if configured to do so by default or the mem_encrypt=on command line parameter is specified. + +Secure Nested Paging (SNP) +========================== + +SEV-SNP introduces new features (SEV_FEATURES[1:63]) which can be enabled +by the hypervisor for security enhancements. Some of these features need +guest side implementation to function correctly. The below table lists the +expected guest behavior with various possible scenarios of guest/hypervisor +SNP feature support. + ++-----------------+---------------+---------------+------------------+ +| Feature Enabled | Guest needs | Guest has | Guest boot | +| by the HV | implementation| implementation| behaviour | ++=================+===============+===============+==================+ +| No | No | No | Boot | +| | | | | ++-----------------+---------------+---------------+------------------+ +| No | Yes | No | Boot | +| | | | | ++-----------------+---------------+---------------+------------------+ +| No | Yes | Yes | Boot | +| | | | | ++-----------------+---------------+---------------+------------------+ +| Yes | No | No | Boot with | +| | | | feature enabled | ++-----------------+---------------+---------------+------------------+ +| Yes | Yes | No | Graceful boot | +| | | | failure | ++-----------------+---------------+---------------+------------------+ +| Yes | Yes | Yes | Boot with | +| | | | feature enabled | ++-----------------+---------------+---------------+------------------+ + +More details in AMD64 APM[1] Vol 2: 15.34.10 SEV_STATUS MSR + +[1] https://www.amd.com/system/files/TechDocs/40332.pdf |