summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-11-14 07:35:48 +0400
committerLinus Torvalds <torvalds@linux-foundation.org>2013-11-14 07:35:48 +0400
commit7f2dc5c4bcbff035b0d03f7aa78a182664b21e47 (patch)
treef4a5ff92305fbf70f1cba3a1ced0f492b27aab74 /Documentation
parent82cb6acea4d10fa4080612c58deb63993f558e5a (diff)
parent7b6b2bc98c0303b7f043ad5b35906f833e56308d (diff)
downloadlinux-7f2dc5c4bcbff035b0d03f7aa78a182664b21e47.tar.xz
Merge tag 'dm-3.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper changes from Mike Snitzer: "A set of device-mapper changes for 3.13. Improve reliability of buffer allocations for dm messages with a small number of arguments, a couple path group initialization fixes for dm multipath, a fix for resizing a dm array, various fixes and optimizations for dm cache, a fix for device mapper's Kconfig menu indentation. Features added include: - dm crypt support for activating legacy CBC TrueCrypt containers (useful for forensics of these old TCRYPT containers) - reduced dm-cache memory requirements for each block in the cache - basic support for shrinking a dm-cache's cache (fast) device - most notably, dm-cache support for managing cache coherency when deploying dm-cache with sophisticated origin volumes (that support hardware snapshots and/or clustering): these changes come in the form of a new passthrough operation mode and a cache block invalidation interface" * tag 'dm-3.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (32 commits) dm cache: resolve small nits and improve Documentation dm cache: add cache block invalidation support dm cache: add remove_cblock method to policy interface dm cache policy mq: reduce memory requirements dm cache metadata: check the metadata version when reading the superblock dm cache: add passthrough mode dm cache: cache shrinking support dm cache: promotion optimisation for writes dm cache: be much more aggressive about promoting writes to discarded blocks dm cache policy mq: implement writeback_work() and mq_{set,clear}_dirty() dm cache: optimize commit_if_needed dm space map disk: optimise sm_disk_dec_block MAINTAINERS: add reference to device-mapper's linux-dm.git tree dm: fix Kconfig menu indentation dm: allow remove to be deferred dm table: print error on preresume failure dm crypt: add TCW IV mode for old CBC TCRYPT containers dm crypt: properly handle extra key string in initialization dm cache: log error message if dm_kcopyd_copy() fails dm cache: use cell_defer() boolean argument consistently ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/device-mapper/cache-policies.txt6
-rw-r--r--Documentation/device-mapper/cache.txt57
-rw-r--r--Documentation/device-mapper/dm-crypt.txt11
3 files changed, 64 insertions, 10 deletions
diff --git a/Documentation/device-mapper/cache-policies.txt b/Documentation/device-mapper/cache-policies.txt
index d7c440b444cc..df52a849957f 100644
--- a/Documentation/device-mapper/cache-policies.txt
+++ b/Documentation/device-mapper/cache-policies.txt
@@ -30,8 +30,10 @@ multiqueue
This policy is the default.
-The multiqueue policy has two sets of 16 queues: one set for entries
-waiting for the cache and another one for those in the cache.
+The multiqueue policy has three sets of 16 queues: one set for entries
+waiting for the cache and another two for those in the cache (a set for
+clean entries and a set for dirty entries).
+
Cache entries in the queues are aged based on logical time. Entry into
the cache is based on variable thresholds and queue selection is based
on hit count on entry. The policy aims to take different cache miss
diff --git a/Documentation/device-mapper/cache.txt b/Documentation/device-mapper/cache.txt
index 33d45ee0b737..274752f8bdf9 100644
--- a/Documentation/device-mapper/cache.txt
+++ b/Documentation/device-mapper/cache.txt
@@ -68,10 +68,11 @@ So large block sizes are bad because they waste cache space. And small
block sizes are bad because they increase the amount of metadata (both
in core and on disk).
-Writeback/writethrough
-----------------------
+Cache operating modes
+---------------------
-The cache has two modes, writeback and writethrough.
+The cache has three operating modes: writeback, writethrough and
+passthrough.
If writeback, the default, is selected then a write to a block that is
cached will go only to the cache and the block will be marked dirty in
@@ -81,8 +82,31 @@ If writethrough is selected then a write to a cached block will not
complete until it has hit both the origin and cache devices. Clean
blocks should remain clean.
+If passthrough is selected, useful when the cache contents are not known
+to be coherent with the origin device, then all reads are served from
+the origin device (all reads miss the cache) and all writes are
+forwarded to the origin device; additionally, write hits cause cache
+block invalidates. To enable passthrough mode the cache must be clean.
+Passthrough mode allows a cache device to be activated without having to
+worry about coherency. Coherency that exists is maintained, although
+the cache will gradually cool as writes take place. If the coherency of
+the cache can later be verified, or established through use of the
+"invalidate_cblocks" message, the cache device can be transitioned to
+writethrough or writeback mode while still warm. Otherwise, the cache
+contents can be discarded prior to transitioning to the desired
+operating mode.
+
A simple cleaner policy is provided, which will clean (write back) all
-dirty blocks in a cache. Useful for decommissioning a cache.
+dirty blocks in a cache. Useful for decommissioning a cache or when
+shrinking a cache. Shrinking the cache's fast device requires all cache
+blocks, in the area of the cache being removed, to be clean. If the
+area being removed from the cache still contains dirty blocks the resize
+will fail. Care must be taken to never reduce the volume used for the
+cache's fast device until the cache is clean. This is of particular
+importance if writeback mode is used. Writethrough and passthrough
+modes already maintain a clean cache. Future support to partially clean
+the cache, above a specified threshold, will allow for keeping the cache
+warm and in writeback mode during resize.
Migration throttling
--------------------
@@ -161,7 +185,7 @@ Constructor
block size : cache unit size in sectors
#feature args : number of feature arguments passed
- feature args : writethrough. (The default is writeback.)
+ feature args : writethrough or passthrough (The default is writeback.)
policy : the replacement policy to use
#policy args : an even number of arguments corresponding to
@@ -177,6 +201,13 @@ Optional feature arguments are:
back cache block contents later for performance reasons,
so they may differ from the corresponding origin blocks.
+ passthrough : a degraded mode useful for various cache coherency
+ situations (e.g., rolling back snapshots of
+ underlying storage). Reads and writes always go to
+ the origin. If a write goes to a cached origin
+ block, then the cache block is invalidated.
+ To enable passthrough mode the cache must be clean.
+
A policy called 'default' is always registered. This is an alias for
the policy we currently think is giving best all round performance.
@@ -231,12 +262,26 @@ The message format is:
E.g.
dmsetup message my_cache 0 sequential_threshold 1024
+
+Invalidation is removing an entry from the cache without writing it
+back. Cache blocks can be invalidated via the invalidate_cblocks
+message, which takes an arbitrary number of cblock ranges. Each cblock
+must be expressed as a decimal value, in the future a variant message
+that takes cblock ranges expressed in hexidecimal may be needed to
+better support efficient invalidation of larger caches. The cache must
+be in passthrough mode when invalidate_cblocks is used.
+
+ invalidate_cblocks [<cblock>|<cblock begin>-<cblock end>]*
+
+E.g.
+ dmsetup message my_cache 0 invalidate_cblocks 2345 3456-4567 5678-6789
+
Examples
========
The test suite can be found here:
-https://github.com/jthornber/thinp-test-suite
+https://github.com/jthornber/device-mapper-test-suite
dmsetup create my_cache --table '0 41943040 cache /dev/mapper/metadata \
/dev/mapper/ssd /dev/mapper/origin 512 1 writeback default 0'
diff --git a/Documentation/device-mapper/dm-crypt.txt b/Documentation/device-mapper/dm-crypt.txt
index 2c656ae43ba7..c81839b52c4d 100644
--- a/Documentation/device-mapper/dm-crypt.txt
+++ b/Documentation/device-mapper/dm-crypt.txt
@@ -4,12 +4,15 @@ dm-crypt
Device-Mapper's "crypt" target provides transparent encryption of block devices
using the kernel crypto API.
+For a more detailed description of supported parameters see:
+http://code.google.com/p/cryptsetup/wiki/DMCrypt
+
Parameters: <cipher> <key> <iv_offset> <device path> \
<offset> [<#opt_params> <opt_params>]
<cipher>
Encryption cipher and an optional IV generation mode.
- (In format cipher[:keycount]-chainmode-ivopts:ivmode).
+ (In format cipher[:keycount]-chainmode-ivmode[:ivopts]).
Examples:
des
aes-cbc-essiv:sha256
@@ -19,7 +22,11 @@ Parameters: <cipher> <key> <iv_offset> <device path> \
<key>
Key used for encryption. It is encoded as a hexadecimal number.
- You can only use key sizes that are valid for the selected cipher.
+ You can only use key sizes that are valid for the selected cipher
+ in combination with the selected iv mode.
+ Note that for some iv modes the key string can contain additional
+ keys (for example IV seed) so the key contains more parts concatenated
+ into a single string.
<keycount>
Multi-key compatibility mode. You can define <keycount> keys and