summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2022-12-14 00:20:36 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2022-12-14 00:20:36 +0300
commit86a0b4255e84563739d137ad374af6c7215bb3ff (patch)
treebe80eb7559564cafc5531dea421fa65e8e5e4c43 /Documentation
parent531d2644f3b10098dadb25b2c26cf19ec0330f90 (diff)
parente291c116f60f3c1ca98090f0f8e7c77e658562fb (diff)
downloadlinux-86a0b4255e84563739d137ad374af6c7215bb3ff.tar.xz
Merge tag 'input-for-v6.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: - a new driver for Cypress Generation 5 touchscreens - a new driver for Hynitron cstxxx touchscreens - a new driver for Himax hx83112b touchscreen - I2C input devices have been converted to use i2c's probe_new() - a large number of input devices are now using DEFINE_SIMPLE_DEV_PM_OPS and pm_sleep_ptr() and no longer use __maybe_unused annotations - improvements to msg2638 touchscreen driver to also support msg2138 - conversion of several input deevine bindings to yaml/DT schema - changes to select touch drivers to move handling of wake irqs to the PM core - other assorted fixes and improvements. * tag 'input-for-v6.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (165 commits) Input: elants_i2c - delay longer with reset asserted dt-bindings: input: Convert ti,drv260x to DT schema dt-bindings: input: gpio-beeper: Convert to yaml schema Input: pxspad - fix unused data warning when force feedback not enabled Input: lpc32xx - allow building with COMPILE_TEST Input: nomadik-ske-keypad - allow building with COMPILE_TEST Input: pxa27xx-keypad - allow build with COMPILE_TEST Input: spear-keyboard - improve build coverage using COMPILE_TEST Input: tegra-kbc - allow build with COMPILE_TEST Input: tegra-kbc - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: tca6416-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: tc3589x - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: st-keyscan - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: sh-keysc - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: qt1070 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: pxa27x_keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: pmic8xxx-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: nomadik-ske-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: mcs-touchkey - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: max7359-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml4
-rw-r--r--Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml25
-rw-r--r--Documentation/devicetree/bindings/input/gpio-beeper.txt13
-rw-r--r--Documentation/devicetree/bindings/input/gpio-beeper.yaml33
-rw-r--r--Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml75
-rw-r--r--Documentation/devicetree/bindings/input/qcom,pm8xxx-pwrkey.txt46
-rw-r--r--Documentation/devicetree/bindings/input/ti,drv260x.txt50
-rw-r--r--Documentation/devicetree/bindings/input/ti,drv260x.yaml109
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml106
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt4
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/himax,hx83112b.yaml63
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/hynitron,cstxxx.yaml65
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml8
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.yaml2
14 files changed, 475 insertions, 128 deletions
diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
index 5d631f7137e7..5efceb313879 100644
--- a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
+++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
@@ -16,7 +16,9 @@ properties:
- const: allwinner,sun4i-a10-lradc-keys
- const: allwinner,sun8i-a83t-r-lradc
- items:
- - const: allwinner,sun50i-a64-lradc
+ - enum:
+ - allwinner,suniv-f1c100s-lradc
+ - allwinner,sun50i-a64-lradc
- const: allwinner,sun8i-a83t-r-lradc
- const: allwinner,sun50i-r329-lradc
- items:
diff --git a/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
index 02e605fac408..9ddba7f2e7aa 100644
--- a/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
+++ b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
@@ -473,9 +473,6 @@ patternProperties:
Specifies whether the event is to be interpreted as a key (1)
or a switch (5).
- required:
- - linux,code
-
additionalProperties: false
dependencies:
@@ -501,7 +498,7 @@ patternProperties:
azoteq,slider-size:
$ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
+ minimum: 1
maximum: 65535
description:
Specifies the slider's one-dimensional resolution, equal to the
@@ -575,9 +572,9 @@ patternProperties:
linux,code: true
azoteq,gesture-max-ms:
- multipleOf: 4
+ multipleOf: 16
minimum: 0
- maximum: 1020
+ maximum: 4080
description:
Specifies the length of time (in ms) within which a tap, swipe
or flick gesture must be completed in order to be acknowledged
@@ -585,9 +582,9 @@ patternProperties:
gesture applies to all remaining swipe or flick gestures.
azoteq,gesture-min-ms:
- multipleOf: 4
+ multipleOf: 16
minimum: 0
- maximum: 124
+ maximum: 496
description:
Specifies the length of time (in ms) for which a tap gesture must
be held in order to be acknowledged by the device.
@@ -620,9 +617,6 @@ patternProperties:
GPIO, they must all be of the same type (proximity, touch or
slider gesture).
- required:
- - linux,code
-
additionalProperties: false
required:
@@ -693,6 +687,7 @@ allOf:
properties:
azoteq,slider-size:
multipleOf: 16
+ minimum: 16
maximum: 4080
azoteq,top-speed:
@@ -935,14 +930,14 @@ examples:
event-tap {
linux,code = <KEY_PLAYPAUSE>;
- azoteq,gesture-max-ms = <600>;
- azoteq,gesture-min-ms = <24>;
+ azoteq,gesture-max-ms = <400>;
+ azoteq,gesture-min-ms = <32>;
};
event-flick-pos {
linux,code = <KEY_NEXTSONG>;
- azoteq,gesture-max-ms = <600>;
- azoteq,gesture-dist = <816>;
+ azoteq,gesture-max-ms = <800>;
+ azoteq,gesture-dist = <800>;
};
event-flick-neg {
diff --git a/Documentation/devicetree/bindings/input/gpio-beeper.txt b/Documentation/devicetree/bindings/input/gpio-beeper.txt
deleted file mode 100644
index a5086e37fce6..000000000000
--- a/Documentation/devicetree/bindings/input/gpio-beeper.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-* GPIO beeper device tree bindings
-
-Register a beeper connected to GPIO pin.
-
-Required properties:
-- compatible: Should be "gpio-beeper".
-- gpios: From common gpio binding; gpio connection to beeper enable pin.
-
-Example:
- beeper: beeper {
- compatible = "gpio-beeper";
- gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
- };
diff --git a/Documentation/devicetree/bindings/input/gpio-beeper.yaml b/Documentation/devicetree/bindings/input/gpio-beeper.yaml
new file mode 100644
index 000000000000..290372add3d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-beeper.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/gpio-beeper.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO controlled beeper
+
+maintainers:
+ - Fabio Estevam <festevam@denx.de>
+
+properties:
+ compatible:
+ const: gpio-beeper
+
+ gpios:
+ maxItems: 1
+ description:
+ GPIO that drives the beeper.
+
+required:
+ - compatible
+ - gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ beeper {
+ compatible = "gpio-beeper";
+ gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml b/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml
new file mode 100644
index 000000000000..12c74c083258
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/qcom,pm8921-pwrkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8921 PMIC Power Key
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+
+allOf:
+ - $ref: input.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - qcom,pm8921-pwrkey
+ - qcom,pm8058-pwrkey
+ - items:
+ - enum:
+ - qcom,pm8018-pwrkey
+ - const: qcom,pm8921-pwrkey
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: key release
+ - description: key press
+
+ debounce:
+ description:
+ Time in microseconds that key must be pressed or
+ released for state change interrupt to trigger.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ pull-up:
+ description:
+ Presence of this property indicates that the KPDPWR_N
+ pin should be configured for pull up.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ ssbi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pwrkey@1c {
+ compatible = "qcom,pm8921-pwrkey";
+ reg = <0x1c>;
+ interrupt-parent = <&pmicint>;
+ interrupts = <50 IRQ_TYPE_EDGE_RISING>, <51 IRQ_TYPE_EDGE_RISING>;
+ debounce = <15625>;
+ pull-up;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-pwrkey.txt
deleted file mode 100644
index 588536cc96ed..000000000000
--- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-pwrkey.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Qualcomm PM8xxx PMIC Power Key
-
-PROPERTIES
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be one of:
- "qcom,pm8058-pwrkey"
- "qcom,pm8921-pwrkey"
-
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: address of power key control register
-
-- interrupts:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: the first interrupt specifies the key release interrupt
- and the second interrupt specifies the key press interrupt.
- The format of the specifier is defined by the binding
- document describing the node's interrupt parent.
-
-- debounce:
- Usage: optional
- Value type: <u32>
- Definition: time in microseconds that key must be pressed or release
- for state change interrupt to trigger.
-
-- pull-up:
- Usage: optional
- Value type: <empty>
- Definition: presence of this property indicates that the KPDPWR_N pin
- should be configured for pull up.
-
-EXAMPLE
-
- pwrkey@1c {
- compatible = "qcom,pm8921-pwrkey";
- reg = <0x1c>;
- interrupt-parent = <&pmicintc>;
- interrupts = <50 1>, <51 1>;
- debounce = <15625>;
- pull-up;
- };
diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt
deleted file mode 100644
index 4c5312eaaa85..000000000000
--- a/Documentation/devicetree/bindings/input/ti,drv260x.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Texas Instruments - drv260x Haptics driver family
-
-Required properties:
- - compatible - One of:
- "ti,drv2604" - DRV2604
- "ti,drv2605" - DRV2605
- "ti,drv2605l" - DRV2605L
- - reg - I2C slave address
- - vbat-supply - Required supply regulator
- - mode - Power up mode of the chip (defined in include/dt-bindings/input/ti-drv260x.h)
- DRV260X_LRA_MODE - Linear Resonance Actuator mode (Piezoelectric)
- DRV260X_LRA_NO_CAL_MODE - This is a LRA Mode but there is no calibration
- sequence during init. And the device is configured for real
- time playback mode (RTP mode).
- DRV260X_ERM_MODE - Eccentric Rotating Mass mode (Rotary vibrator)
- - library-sel - These are ROM based waveforms pre-programmed into the IC.
- This should be set to set the library to use at power up.
- (defined in include/dt-bindings/input/ti-drv260x.h)
- DRV260X_LIB_EMPTY - Do not use a pre-programmed library
- DRV260X_ERM_LIB_A - Pre-programmed Library
- DRV260X_ERM_LIB_B - Pre-programmed Library
- DRV260X_ERM_LIB_C - Pre-programmed Library
- DRV260X_ERM_LIB_D - Pre-programmed Library
- DRV260X_ERM_LIB_E - Pre-programmed Library
- DRV260X_ERM_LIB_F - Pre-programmed Library
- DRV260X_LIB_LRA - Pre-programmed LRA Library
-
-Optional properties:
- - enable-gpio - gpio pin to enable/disable the device.
- - vib-rated-mv - The rated voltage of the actuator in millivolts.
- If this is not set then the value will be defaulted to
- 3.2 v.
- - vib-overdrive-mv - The overdrive voltage of the actuator in millivolts.
- If this is not set then the value will be defaulted to
- 3.2 v.
-Example:
-
-haptics: haptics@5a {
- compatible = "ti,drv2605l";
- reg = <0x5a>;
- vbat-supply = <&vbat>;
- enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
- mode = <DRV260X_LRA_MODE>;
- library-sel = <DRV260X_LIB_LRA>;
- vib-rated-mv = <3200>;
- vib-overdrive-mv = <3200>;
-}
-
-For more product information please see the link below:
-http://www.ti.com/product/drv2605
diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.yaml b/Documentation/devicetree/bindings/input/ti,drv260x.yaml
new file mode 100644
index 000000000000..c6245c5b9e2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ti,drv260x.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ti,drv260x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments - drv260x Haptics driver family
+
+maintainers:
+ - Andrew Davis <afd@ti.com>
+
+properties:
+ compatible:
+ enum:
+ - ti,drv2604
+ - ti,drv2605
+ - ti,drv2605l
+
+ reg:
+ maxItems: 1
+
+ vbat-supply:
+ description: Power supply to the haptic motor
+
+ # TODO: Deprecate 'mode' in favor of differently named property
+ mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Power up mode of the chip
+ (defined in include/dt-bindings/input/ti-drv260x.h)
+
+ DRV260X_LRA_MODE
+ Linear Resonance Actuator mode (Piezoelectric)
+
+ DRV260X_LRA_NO_CAL_MODE
+ This is a LRA Mode but there is no calibration sequence during init.
+ And the device is configured for real time playback mode (RTP mode).
+
+ DRV260X_ERM_MODE
+ Eccentric Rotating Mass mode (Rotary vibrator)
+ enum: [ 0, 1, 2 ]
+
+ library-sel:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ These are ROM based waveforms pre-programmed into the IC.
+ This should be set to set the library to use at power up.
+ (defined in include/dt-bindings/input/ti-drv260x.h)
+
+ DRV260X_LIB_EMPTY - Do not use a pre-programmed library
+ DRV260X_ERM_LIB_A - Pre-programmed Library
+ DRV260X_ERM_LIB_B - Pre-programmed Library
+ DRV260X_ERM_LIB_C - Pre-programmed Library
+ DRV260X_ERM_LIB_D - Pre-programmed Library
+ DRV260X_ERM_LIB_E - Pre-programmed Library
+ DRV260X_ERM_LIB_F - Pre-programmed Library
+ DRV260X_LIB_LRA - Pre-programmed LRA Library
+ enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
+
+ enable-gpio:
+ maxItems: 1
+ deprecated: true
+
+ enable-gpios:
+ maxItems: 1
+
+ vib-rated-mv:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ The rated voltage of the actuator in millivolts.
+ If this is not set then the value will be defaulted to 3200 mV.
+ default: 3200
+
+ vib-overdrive-mv:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ The overdrive voltage of the actuator in millivolts.
+ If this is not set then the value will be defaulted to 3200 mV.
+ default: 3200
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - mode
+ - library-sel
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/input/ti-drv260x.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ haptics@5a {
+ compatible = "ti,drv2605l";
+ reg = <0x5a>;
+ vbat-supply = <&vbat>;
+ enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ mode = <DRV260X_LRA_MODE>;
+ library-sel = <DRV260X_LIB_LRA>;
+ vib-rated-mv = <3200>;
+ vib-overdrive-mv = <3200>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml
new file mode 100644
index 000000000000..1959ec394768
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/cypress,tt21000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress TT21000 touchscreen controller
+
+description: The Cypress TT21000 series (also known as "CYTTSP5" after
+ the marketing name Cypress TrueTouch Standard Product series 5).
+
+maintainers:
+ - Alistair Francis <alistair@alistair23.me>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ const: cypress,tt21000
+
+ reg:
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ interrupts:
+ maxItems: 1
+
+ vdd-supply:
+ description: Regulator for voltage.
+
+ reset-gpios:
+ maxItems: 1
+
+ linux,keycodes:
+ description: EV_ABS specific event code generated by the axis.
+
+patternProperties:
+ "^button@[0-9]+$":
+ type: object
+ $ref: ../input.yaml#
+ properties:
+ reg:
+ maxItems: 1
+ linux,keycodes:
+ description: Keycode to emit
+
+ required:
+ - reg
+ - linux,keycodes
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - vdd-supply
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/input/linux-event-codes.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@24 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "cypress,tt21000";
+ reg = <0x24>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tp_reset_ds203>;
+ interrupt-parent = <&pio>;
+ interrupts = <1 5 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&reg_touch>;
+
+ button@0 {
+ reg = <0>;
+ linux,keycodes = <KEY_HOMEPAGE>;
+ };
+
+ button@1 {
+ reg = <1>;
+ linux,keycodes = <KEY_MENU>;
+ };
+
+ button@2 {
+ reg = <2>;
+ linux,keycodes = <KEY_BACK>;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
index 92fb2620f5e2..ebbe93810574 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
@@ -13,6 +13,6 @@ Example:
compatible = "eeti,egalax_ts";
reg = <0x04>;
interrupt-parent = <&gpio1>;
- interrupts = <9 2>;
- wakeup-gpios = <&gpio1 9 0>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+ wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/himax,hx83112b.yaml b/Documentation/devicetree/bindings/input/touchscreen/himax,hx83112b.yaml
new file mode 100644
index 000000000000..be2ba185c086
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/himax,hx83112b.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/himax,hx83112b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax hx83112b touchscreen controller bindings
+
+maintainers:
+ - Job Noorman <job@noorman.info>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ enum:
+ - himax,hx83112b
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - reset-gpios
+ - touchscreen-size-x
+ - touchscreen-size-y
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ touchscreen@48 {
+ compatible = "himax,hx83112b";
+ reg = <0x48>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <65 IRQ_TYPE_LEVEL_LOW>;
+ touchscreen-size-x = <1080>;
+ touchscreen-size-y = <2160>;
+ reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/hynitron,cstxxx.yaml b/Documentation/devicetree/bindings/input/touchscreen/hynitron,cstxxx.yaml
new file mode 100644
index 000000000000..9cb5d4af00f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/hynitron,cstxxx.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/hynitron,cstxxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hynitron cstxxx series touchscreen controller
+
+description: |
+ Bindings for Hynitron cstxxx series multi-touch touchscreen
+ controllers.
+
+maintainers:
+ - Chris Morgan <macromorgan@hotmail.com>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ enum:
+ - hynitron,cst340
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - reset-gpios
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ touchscreen@1a {
+ compatible = "hynitron,cst340";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
+ touchscreen-size-x = <640>;
+ touchscreen-size-y = <480>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml
index 3a42c23faf6f..af4f954de958 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml
@@ -14,7 +14,9 @@ allOf:
properties:
compatible:
- const: mstar,msg2638
+ enum:
+ - mstar,msg2138
+ - mstar,msg2638
reg:
const: 0x26
@@ -34,6 +36,10 @@ properties:
touchscreen-size-x: true
touchscreen-size-y: true
+ linux,keycodes:
+ minItems: 1
+ maxItems: 4
+
additionalProperties: false
required:
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 83ba9c4aac67..d5f1c4c1ef45 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -573,6 +573,8 @@ patternProperties:
description: Hycon Technology Corp.
"^hydis,.*":
description: Hydis Technologies
+ "^hynitron,.*":
+ description: Shanghai Hynitron Microelectronics Co. Ltd.
"^hynix,.*":
description: SK Hynix Inc.
"^hyundai,.*":