Merge tag 'mmc-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Allow synchronous detection of (e)MMC/SD/SDIO cards
   - Fixup error check for ioctls for SPI hosts
   - Disable broken SD-Cache support for Kingston Canvas Go Plus from 2019
   - Disable broken eMMC-Trim support for Kingston EMMC04G-M627
   - Disable broken eMMC-Trim support for Micron MTFC4GACAJCN-1M

  MMC host:
   - bcm2835: Convert DT bindings to YAML
   - mmci:
      - Enable asynchronous probe
      - Transform the ux500 HW-busy detection into a proper state machine
      - Add support for SW busy-end timeouts for the ux500 variants
   - mmci_stm32:
      - Add support for sdm32 variant revision v3.0 used on STM32MP25
      - Improve the tuning sequence
   - mtk-sd: Tune polling-period to improve performance
   - sdhci: Fixup DMA configuration for 64-bit DMA mode
   - sdhci-bcm-kona: Convert DT bindings to YAML
   - sdhci-msm:
      - Switch to use the new ICE API
      - Add support for the SC8280XP/IPQ6018/QDU1000/QRU1000 variants
   - sdhci-pci-gli:
      - Add support SD Express cards for GL9767
      - Add support for the Genesys Logic GL9767 variant"

* tag 'mmc-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (42 commits)
  dt-bindings: mmc: fsl-imx-esdhc: Add imx6ul support
  mmc: mmci: Add support for SW busy-end timeouts
  mmc: Add MMC_QUIRK_BROKEN_SD_CACHE for Kingston Canvas Go Plus from 11/2019
  mmc: core: disable TRIM on Kingston EMMC04G-M627
  mmc: mmci: stm32: add delay block support for STM32MP25
  mmc: mmci: stm32: prepare other delay block support
  mmc: mmci: stm32: manage block gap hardware flow control
  mmc: mmci: Add support for sdmmc variant revision v3.0
  mmc: mmci: add stm32_idmabsize_align parameter
  dt-bindings: mmc: mmci: Add st,stm32mp25-sdmmc2 compatible
  mmc: core: disable TRIM on Micron MTFC4GACAJCN-1M
  mmc: mmci: Break out a helper function
  mmc: mmci: Use a switch statement machine
  mmc: mmci: Use state machine state as exit condition
  mmc: mmci: Retry the busy start condition
  mmc: mmci: Make busy complete state machine explicit
  mmc: mmci: Break out error check in busy detect
  mmc: mmci: Stash status while waiting for busy
  mmc: mmci: Unwind big if() clause
  mmc: mmci: Clear busy_status when starting command
  ...

7 files changed, 110 insertions, 47 deletions

diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
index 1c96da04f0e5..2459a55ed540 100644
--- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
+++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
@@ -53,10 +53,11 @@ properties:
         items:
           - const: arm,pl18x
           - const: arm,primecell
-      - description: Entry for STMicroelectronics variant of PL18x.
-          This dedicated compatible is used by bootloaders.
+      - description: Entries for STMicroelectronics variant of PL18x.
         items:
-          - const: st,stm32-sdmmc2
+          - enum:
+              - st,stm32-sdmmc2
+              - st,stm32mp25-sdmmc2
           - const: arm,pl18x
           - const: arm,primecell
 
diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt
deleted file mode 100644
index d876580ae3b8..000000000000
--- a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Broadcom BCM2835 SDHOST controller
-
-This file documents differences between the core properties described
-by mmc.txt and the properties that represent the BCM2835 controller.
-
-Required properties:
-- compatible: Should be "brcm,bcm2835-sdhost".
-- clocks: The clock feeding the SDHOST controller.
-
-Optional properties:
-- dmas: DMA channel for read and write.
-          See Documentation/devicetree/bindings/dma/dma.txt for details
-
-Example:
-
-sdhost: mmc@7e202000 {
-	compatible = "brcm,bcm2835-sdhost";
-	reg = <0x7e202000 0x100>;
-	interrupts = <2 24>;
-	clocks = <&clocks BCM2835_CLOCK_VPU>;
-	dmas = <&dma 13>;
-	dma-names = "rx-tx";
-};
diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.yaml b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.yaml
new file mode 100644
index 000000000000..3a5a44800675
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/brcm,bcm2835-sdhost.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 SDHOST controller
+
+maintainers:
+  - Stefan Wahren <stefan.wahren@i2se.com>
+
+allOf:
+  - $ref: mmc-controller.yaml
+
+properties:
+  compatible:
+    const: brcm,bcm2835-sdhost
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx-tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+
+    sdhost: mmc@7e202000 {
+      compatible = "brcm,bcm2835-sdhost";
+      reg = <0x7e202000 0x100>;
+      interrupts = <2 24>;
+      clocks = <&clocks BCM2835_CLOCK_VPU>;
+      dmas = <&dma 13>;
+      dma-names = "rx-tx";
+      bus-width = <4>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt
deleted file mode 100644
index 7f5dd83f5bd9..000000000000
--- a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Broadcom BCM281xx SDHCI
-
-This file documents differences between the core properties in mmc.txt
-and the properties present in the bcm281xx SDHCI
-
-Required properties:
-- compatible : Should be "brcm,kona-sdhci"
-- DEPRECATED: compatible : Should be "bcm,kona-sdhci"
-- clocks: phandle + clock specifier pair of the external clock
-
-Refer to clocks/clock-bindings.txt for generic clock consumer properties.
-
-Example:
-
-sdio2: sdio@3f1a0000 {
-	compatible = "brcm,kona-sdhci";
-	reg = <0x3f1a0000 0x10000>;
-	clocks = <&sdio3_clk>;
-	interrupts = <0x0 74 0x4>;
-};
-
diff --git a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.yaml b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.yaml
new file mode 100644
index 000000000000..12eb3988f824
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/brcm,kona-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family SDHCI controller
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: sdhci-common.yaml#
+
+properties:
+  compatible:
+    const: brcm,kona-sdhci
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/bcm281xx.h>
+
+    mmc@3f1a0000 {
+        compatible = "brcm,kona-sdhci";
+        reg = <0x3f1a0000 0x10000>;
+        clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO3>;
+        interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
index fbfd822b9270..82eb7a24c857 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
@@ -42,6 +42,7 @@ properties:
           - enum:
               - fsl,imx6sll-usdhc
               - fsl,imx6ull-usdhc
+              - fsl,imx6ul-usdhc
           - const: fsl,imx6sx-usdhc
       - items:
           - const: fsl,imx7d-usdhc
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
index 4f2d9e8127dd..6da28e630577 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
@@ -36,11 +36,14 @@ properties:
           - enum:
               - qcom,ipq5018-sdhci
               - qcom,ipq5332-sdhci
+              - qcom,ipq6018-sdhci
               - qcom,ipq9574-sdhci
               - qcom,qcm2290-sdhci
               - qcom,qcs404-sdhci
+              - qcom,qdu1000-sdhci
               - qcom,sc7180-sdhci
               - qcom,sc7280-sdhci
+              - qcom,sc8280xp-sdhci
               - qcom,sdm630-sdhci
               - qcom,sdm670-sdhci
               - qcom,sdm845-sdhci