summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-07-09 19:15:03 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2019-07-09 19:15:03 +0300
commit98537ee92fb1b17a7f36dcbc8d2e4087af300da6 (patch)
tree7e50d933e2ef6078aafe9bd459ea09c5f32eddae /Documentation
parent12a5146bda2f21728bdd475f10e5785fc62c9c29 (diff)
parent0ed4513c9a32a479b4dc41685be68edf1e99c139 (diff)
downloadlinux-98537ee92fb1b17a7f36dcbc8d2e4087af300da6.tar.xz
Merge tag 'regulator-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown: "A couple of new features in the core, the most interesting one being support for complex regulator coupling configurations initially targeted at nVidia Tegra SoCs, and some new drivers but otherwise quite a quiet release. Summary: - Core support for gradual ramping of voltages for devices that can't manage large changes in hardware from Bartosz Golaszewski. - Core support for systems that have complex coupling requirements best described via code, contributed by Dmitry Osipenko. - New drivers for Dialog SLG51000, Qualcomm PM8005 and ST Microelectronics STM32-Booster" * tag 'regulator-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits) regulator: max77650: use vsel_step regulator: implement selector stepping regulator: max77650: add MODULE_ALIAS() regulator: max77620: remove redundant assignment to variable ret dt-bindings: regulator: add support for the stm32-booster regulator: add support for the stm32-booster regulator: s2mps11: Adjust supported buck voltages to real values regulator: s2mps11: Fix buck7 and buck8 wrong voltages gpio: Fix return value mismatch of function gpiod_get_from_of_node() regulator: core: Expose some of core functions needed by couplers regulator: core: Introduce API for regulators coupling customization regulator: s2mps11: Add support for disabling S2MPS11 regulators in suspend regulator: s2mps11: Reduce number of rdev_get_id() calls regulator: qcom_spmi: Do NULL check for lvs regulator: qcom_spmi: Fix math of spmi_regulator_set_voltage_time_sel regulator: da9061/62: Adjust LDO voltage selection minimum value regulator: s2mps11: Fix ERR_PTR dereference on GPIO lookup failure regulator: qcom_spmi: add PMS405 SPMI regulator dt-bindings: qcom_spmi: Document pms405 support arm64: dts: msm8998-mtp: Add pm8005_s1 regulator ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/regulator/arizona-regulator.txt3
-rw-r--r--Documentation/devicetree/bindings/regulator/fixed-regulator.yaml5
-rw-r--r--Documentation/devicetree/bindings/regulator/gpio-regulator.txt57
-rw-r--r--Documentation/devicetree/bindings/regulator/gpio-regulator.yaml118
-rw-r--r--Documentation/devicetree/bindings/regulator/max8660.txt47
-rw-r--r--Documentation/devicetree/bindings/regulator/max8660.yaml77
-rw-r--r--Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt22
-rw-r--r--Documentation/devicetree/bindings/regulator/regulator.txt140
-rw-r--r--Documentation/devicetree/bindings/regulator/regulator.yaml200
-rw-r--r--Documentation/devicetree/bindings/regulator/slg51000.txt88
-rw-r--r--Documentation/devicetree/bindings/regulator/st,stm32-booster.txt18
11 files changed, 530 insertions, 245 deletions
diff --git a/Documentation/devicetree/bindings/regulator/arizona-regulator.txt b/Documentation/devicetree/bindings/regulator/arizona-regulator.txt
index 443564d7784f..69bf41949b01 100644
--- a/Documentation/devicetree/bindings/regulator/arizona-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/arizona-regulator.txt
@@ -5,7 +5,8 @@ of analogue I/O.
This document lists regulator specific bindings, see the primary binding
document:
- ../mfd/arizona.txt
+ For Wolfson Microelectronic Arizona codecs: ../mfd/arizona.txt
+ For Cirrus Logic Madera codecs: ../mfd/madera.txt
Optional properties:
- wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
index d289c2f7455a..a650b457085d 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
@@ -12,10 +12,13 @@ maintainers:
description:
Any property defined as part of the core regulator binding, defined in
- regulator.txt, can also be used. However a fixed voltage regulator is
+ regulator.yaml, can also be used. However a fixed voltage regulator is
expected to have the regulator-min-microvolt and regulator-max-microvolt
to be the same.
+allOf:
+ - $ref: "regulator.yaml#"
+
properties:
compatible:
const: regulator-fixed
diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
deleted file mode 100644
index dd25e73b5d79..000000000000
--- a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-GPIO controlled regulators
-
-Required properties:
-- compatible : Must be "regulator-gpio".
-- regulator-name : Defined in regulator.txt as optional, but required
- here.
-- gpios : Array of one or more GPIO pins used to select the
- regulator voltage/current listed in "states".
-- states : Selection of available voltages/currents provided by
- this regulator and matching GPIO configurations to
- achieve them. If there are no states in the "states"
- array, use a fixed regulator instead.
-
-Optional properties:
-- enable-gpios : GPIO used to enable/disable the regulator.
- Warning, the GPIO phandle flags are ignored and the
- GPIO polarity is controlled solely by the presence
- of "enable-active-high" DT property. This is due to
- compatibility with old DTs.
-- enable-active-high : Polarity of "enable-gpio" GPIO is active HIGH.
- Default is active LOW.
-- gpios-states : On operating systems, that don't support reading back
- gpio values in output mode (most notably linux), this
- array provides the state of GPIO pins set when
- requesting them from the gpio controller. Systems,
- that are capable of preserving state when requesting
- the lines, are free to ignore this property.
- 0: LOW, 1: HIGH. Default is LOW if nothing else
- is specified.
-- startup-delay-us : Startup time in microseconds.
-- regulator-type : Specifies what is being regulated, must be either
- "voltage" or "current", defaults to voltage.
-
-Any property defined as part of the core regulator binding defined in
-regulator.txt can also be used.
-
-Example:
-
- mmciv: gpio-regulator {
- compatible = "regulator-gpio";
-
- regulator-name = "mmci-gpio-supply";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2600000>;
- regulator-boot-on;
-
- enable-gpios = <&gpio0 23 0x4>;
- gpios = <&gpio0 24 0x4
- &gpio0 25 0x4>;
- states = <1800000 0x3
- 2200000 0x2
- 2600000 0x1
- 2900000 0x0>;
-
- startup-delay-us = <100000>;
- enable-active-high;
- };
diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
new file mode 100644
index 000000000000..9d3b28417fb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/gpio-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO controlled regulators
+
+maintainers:
+ - Liam Girdwood <lgirdwood@gmail.com>
+ - Mark Brown <broonie@kernel.org>
+
+description:
+ Any property defined as part of the core regulator binding, defined in
+ regulator.txt, can also be used.
+
+allOf:
+ - $ref: "regulator.yaml#"
+
+properties:
+ compatible:
+ const: regulator-gpio
+
+ regulator-name: true
+
+ enable-gpios:
+ description: GPIO to use to enable/disable the regulator.
+ Warning, the GPIO phandle flags are ignored and the GPIO polarity is
+ controlled solely by the presence of "enable-active-high" DT property.
+ This is due to compatibility with old DTs.
+ maxItems: 1
+
+ gpios:
+ description: Array of one or more GPIO pins used to select the regulator
+ voltage/current listed in "states".
+ minItems: 1
+ maxItems: 8 # Should be enough...
+
+ gpios-states:
+ description: |
+ On operating systems, that don't support reading back gpio values in
+ output mode (most notably linux), this array provides the state of GPIO
+ pins set when requesting them from the gpio controller. Systems, that are
+ capable of preserving state when requesting the lines, are free to ignore
+ this property.
+ 0: LOW
+ 1: HIGH
+ Default is LOW if nothing else is specified.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ - maxItems: 8
+ items:
+ enum: [ 0, 1 ]
+ default: 0
+
+ states:
+ description: Selection of available voltages/currents provided by this
+ regulator and matching GPIO configurations to achieve them. If there are
+ no states in the "states" array, use a fixed regulator instead.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ - maxItems: 8
+ items:
+ items:
+ - description: Voltage in microvolts
+ - description: GPIO group state value
+
+ startup-delay-us:
+ description: startup time in microseconds
+
+ enable-active-high:
+ description: Polarity of "enable-gpio" GPIO is active HIGH. Default is
+ active LOW.
+ type: boolean
+
+ gpio-open-drain:
+ description:
+ GPIO is open drain type. If this property is missing then default
+ assumption is false.
+ type: boolean
+
+ regulator-type:
+ description: Specifies what is being regulated.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/string
+ - enum:
+ - voltage
+ - current
+ default: voltage
+
+required:
+ - compatible
+ - regulator-name
+ - gpios
+ - states
+
+examples:
+ - |
+ gpio-regulator {
+ compatible = "regulator-gpio";
+
+ regulator-name = "mmci-gpio-supply";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2600000>;
+ regulator-boot-on;
+
+ enable-gpios = <&gpio0 23 0x4>;
+ gpios = <&gpio0 24 0x4
+ &gpio0 25 0x4>;
+ states = <1800000 0x3>,
+ <2200000 0x2>,
+ <2600000 0x1>,
+ <2900000 0x0>;
+
+ startup-delay-us = <100000>;
+ enable-active-high;
+ };
+...
diff --git a/Documentation/devicetree/bindings/regulator/max8660.txt b/Documentation/devicetree/bindings/regulator/max8660.txt
deleted file mode 100644
index 8ba994d8a142..000000000000
--- a/Documentation/devicetree/bindings/regulator/max8660.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-Maxim MAX8660 voltage regulator
-
-Required properties:
-- compatible: must be one of "maxim,max8660", "maxim,max8661"
-- reg: I2C slave address, usually 0x34
-- any required generic properties defined in regulator.txt
-
-Example:
-
- i2c_master {
- max8660@34 {
- compatible = "maxim,max8660";
- reg = <0x34>;
-
- regulators {
- regulator@0 {
- regulator-compatible= "V3(DCDC)";
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1800000>;
- };
-
- regulator@1 {
- regulator-compatible= "V4(DCDC)";
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1800000>;
- };
-
- regulator@2 {
- regulator-compatible= "V5(LDO)";
- regulator-min-microvolt = <1700000>;
- regulator-max-microvolt = <2000000>;
- };
-
- regulator@3 {
- regulator-compatible= "V6(LDO)";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- regulator@4 {
- regulator-compatible= "V7(LDO)";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/regulator/max8660.yaml b/Documentation/devicetree/bindings/regulator/max8660.yaml
new file mode 100644
index 000000000000..9c038698f880
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max8660.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/max8660.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX8660 voltage regulator
+
+maintainers:
+ - Daniel Mack <zonque@gmail.com>
+
+properties:
+ $nodename:
+ pattern: "pmic@[0-9a-f]{1,2}"
+ compatible:
+ enum:
+ - maxim,max8660
+ - maxim,max8661
+
+ reg:
+ maxItems: 1
+
+ regulators:
+ type: object
+
+ patternProperties:
+ "regulator-.+":
+ $ref: "regulator.yaml#"
+
+ additionalProperties: false
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@34 {
+ compatible = "maxim,max8660";
+ reg = <0x34>;
+
+ regulators {
+ regulator-V3 {
+ regulator-compatible= "V3(DCDC)";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator-V4 {
+ regulator-compatible= "V4(DCDC)";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator-V5 {
+ regulator-compatible= "V5(LDO)";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ regulator-V6 {
+ regulator-compatible= "V6(LDO)";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator-V7 {
+ regulator-compatible= "V7(LDO)";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
index 406f2e570c50..430b8622bda1 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
@@ -4,11 +4,13 @@ Qualcomm SPMI Regulators
Usage: required
Value type: <string>
Definition: must be one of:
+ "qcom,pm8005-regulators"
"qcom,pm8841-regulators"
"qcom,pm8916-regulators"
"qcom,pm8941-regulators"
"qcom,pm8994-regulators"
"qcom,pmi8994-regulators"
+ "qcom,pms405-regulators"
- interrupts:
Usage: optional
@@ -110,6 +112,23 @@ Qualcomm SPMI Regulators
Definition: Reference to regulator supplying the input pin, as
described in the data sheet.
+- vdd_l1_l2-supply:
+- vdd_l3_l8-supply:
+- vdd_l4-supply:
+- vdd_l5_l6-supply:
+- vdd_l10_l11_l12_l13-supply:
+- vdd_l7-supply:
+- vdd_l9-supply:
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_s4-supply:
+- vdd_s5-supply
+ Usage: optional (pms405 only)
+ Value type: <phandle>
+ Definition: Reference to regulator supplying the input pin, as
+ described in the data sheet.
+
- qcom,saw-reg:
Usage: optional
Value type: <phandle>
@@ -120,6 +139,9 @@ The regulator node houses sub-nodes for each regulator within the device. Each
sub-node is identified using the node's name, with valid values listed for each
of the PMICs below.
+pm8005:
+ s1, s2, s3, s4
+
pm8841:
s1, s2, s3, s4, s5, s6, s7, s8
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index 0a3f087d5844..487ccd8370b3 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -1,139 +1 @@
-Voltage/Current Regulators
-
-Optional properties:
-- regulator-name: A string used as a descriptive name for regulator outputs
-- regulator-min-microvolt: smallest voltage consumers may set
-- regulator-max-microvolt: largest voltage consumers may set
-- regulator-microvolt-offset: Offset applied to voltages to compensate for voltage drops
-- regulator-min-microamp: smallest current consumers may set
-- regulator-max-microamp: largest current consumers may set
-- regulator-input-current-limit-microamp: maximum input current regulator allows
-- regulator-always-on: boolean, regulator should never be disabled
-- regulator-boot-on: bootloader/firmware enabled regulator
-- regulator-allow-bypass: allow the regulator to go into bypass mode
-- regulator-allow-set-load: allow the regulator performance level to be configured
-- <name>-supply: phandle to the parent supply/regulator node
-- regulator-ramp-delay: ramp delay for regulator(in uV/us)
- For hardware which supports disabling ramp rate, it should be explicitly
- initialised to zero (regulator-ramp-delay = <0>) for disabling ramp delay.
-- regulator-enable-ramp-delay: The time taken, in microseconds, for the supply
- rail to reach the target voltage, plus/minus whatever tolerance the board
- design requires. This property describes the total system ramp time
- required due to the combination of internal ramping of the regulator itself,
- and board design issues such as trace capacitance and load on the supply.
-- regulator-settling-time-us: Settling time, in microseconds, for voltage
- change if regulator have the constant time for any level voltage change.
- This is useful when regulator have exponential voltage change.
-- regulator-settling-time-up-us: Settling time, in microseconds, for voltage
- increase if the regulator needs a constant time to settle after voltage
- increases of any level. This is useful for regulators with exponential
- voltage changes.
-- regulator-settling-time-down-us: Settling time, in microseconds, for voltage
- decrease if the regulator needs a constant time to settle after voltage
- decreases of any level. This is useful for regulators with exponential
- voltage changes.
-- regulator-soft-start: Enable soft start so that voltage ramps slowly
-- regulator-state-standby sub-root node for Standby mode
- : equivalent with standby Linux sleep state, which provides energy savings
- with a relatively quick transition back time.
-- regulator-state-mem sub-root node for Suspend-to-RAM mode
- : suspend to memory, the device goes to sleep, but all data stored in memory,
- only some external interrupt can wake the device.
-- regulator-state-disk sub-root node for Suspend-to-DISK mode
- : suspend to disk, this state operates similarly to Suspend-to-RAM,
- but includes a final step of writing memory contents to disk.
-- regulator-state-[mem/disk/standby] node has following common properties:
- - regulator-on-in-suspend: regulator should be on in suspend state.
- - regulator-off-in-suspend: regulator should be off in suspend state.
- - regulator-suspend-min-microvolt: minimum voltage may be set in
- suspend state.
- - regulator-suspend-max-microvolt: maximum voltage may be set in
- suspend state.
- - regulator-suspend-microvolt: the default voltage which regulator
- would be set in suspend. This property is now deprecated, instead
- setting voltage for suspend mode via the API which regulator
- driver provides is recommended.
- - regulator-changeable-in-suspend: whether the default voltage and
- the regulator on/off in suspend can be changed in runtime.
- - regulator-mode: operating mode in the given suspend state.
- The set of possible operating modes depends on the capabilities of
- every hardware so the valid modes are documented on each regulator
- device tree binding document.
-- regulator-initial-mode: initial operating mode. The set of possible operating
- modes depends on the capabilities of every hardware so each device binding
- documentation explains which values the regulator supports.
-- regulator-allowed-modes: list of operating modes that software is allowed to
- configure for the regulator at run-time. Elements may be specified in any
- order. The set of possible operating modes depends on the capabilities of
- every hardware so each device binding document explains which values the
- regulator supports.
-- regulator-system-load: Load in uA present on regulator that is not captured by
- any consumer request.
-- regulator-pull-down: Enable pull down resistor when the regulator is disabled.
-- regulator-over-current-protection: Enable over current protection.
-- regulator-active-discharge: tristate, enable/disable active discharge of
- regulators. The values are:
- 0: Disable active discharge.
- 1: Enable active discharge.
- Absence of this property will leave configuration to default.
-- regulator-coupled-with: Regulators with which the regulator
- is coupled. The linkage is 2-way - all coupled regulators should be linked
- with each other. A regulator should not be coupled with its supplier.
-- regulator-coupled-max-spread: Array of maximum spread between voltages of
- coupled regulators in microvolts, each value in the array relates to the
- corresponding couple specified by the regulator-coupled-with property.
-- regulator-max-step-microvolt: Maximum difference between current and target
- voltages that can be changed safely in a single step.
-
-Deprecated properties:
-- regulator-compatible: If a regulator chip contains multiple
- regulators, and if the chip's binding contains a child node that
- describes each regulator, then this property indicates which regulator
- this child node is intended to configure. If this property is missing,
- the node's name will be used instead.
-
-Example:
-
- xyzreg: regulator@0 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <2500000>;
- regulator-always-on;
- vin-supply = <&vin>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
-Regulator Consumers:
-Consumer nodes can reference one or more of its supplies/
-regulators using the below bindings.
-
-- <name>-supply: phandle to the regulator node
-
-These are the same bindings that a regulator in the above
-example used to reference its own supply, in which case
-its just seen as a special case of a regulator being a
-consumer itself.
-
-Example of a consumer device node (mmc) referencing two
-regulators (twl_reg1 and twl_reg2),
-
- twl_reg1: regulator@0 {
- ...
- ...
- ...
- };
-
- twl_reg2: regulator@1 {
- ...
- ...
- ...
- };
-
- mmc: mmc@0 {
- ...
- ...
- vmmc-supply = <&twl_reg1>;
- vmmcaux-supply = <&twl_reg2>;
- };
+This file has moved to regulator.yaml.
diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml
new file mode 100644
index 000000000000..02c3043ce419
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/regulator.yaml
@@ -0,0 +1,200 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Voltage/Current Regulators
+
+maintainers:
+ - Liam Girdwood <lgirdwood@gmail.com>
+ - Mark Brown <broonie@kernel.org>
+
+properties:
+ regulator-name:
+ description: A string used as a descriptive name for regulator outputs
+ $ref: "/schemas/types.yaml#/definitions/string"
+
+ regulator-min-microvolt:
+ description: smallest voltage consumers may set
+
+ regulator-max-microvolt:
+ description: largest voltage consumers may set
+
+ regulator-microvolt-offset:
+ description: Offset applied to voltages to compensate for voltage drops
+
+ regulator-min-microamp:
+ description: smallest current consumers may set
+
+ regulator-max-microamp:
+ description: largest current consumers may set
+
+ regulator-input-current-limit-microamp:
+ description: maximum input current regulator allows
+
+ regulator-always-on:
+ description: boolean, regulator should never be disabled
+ type: boolean
+
+ regulator-boot-on:
+ description: bootloader/firmware enabled regulator
+ type: boolean
+
+ regulator-allow-bypass:
+ description: allow the regulator to go into bypass mode
+ type: boolean
+
+ regulator-allow-set-load:
+ description: allow the regulator performance level to be configured
+ type: boolean
+
+ regulator-ramp-delay:
+ description: ramp delay for regulator(in uV/us) For hardware which supports
+ disabling ramp rate, it should be explicitly initialised to zero (regulator-ramp-delay
+ = <0>) for disabling ramp delay.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+
+ regulator-enable-ramp-delay:
+ description: The time taken, in microseconds, for the supply rail to
+ reach the target voltage, plus/minus whatever tolerance the board
+ design requires. This property describes the total system ramp time
+ required due to the combination of internal ramping of the regulator
+ itself, and board design issues such as trace capacitance and load
+ on the supply.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+
+ regulator-settling-time-us:
+ description: Settling time, in microseconds, for voltage change if regulator
+ have the constant time for any level voltage change. This is useful
+ when regulator have exponential voltage change.
+
+ regulator-settling-time-up-us:
+ description: Settling time, in microseconds, for voltage increase if
+ the regulator needs a constant time to settle after voltage increases
+ of any level. This is useful for regulators with exponential voltage
+ changes.
+
+ regulator-settling-time-down-us:
+ description: Settling time, in microseconds, for voltage decrease if
+ the regulator needs a constant time to settle after voltage decreases
+ of any level. This is useful for regulators with exponential voltage
+ changes.
+
+ regulator-soft-start:
+ description: Enable soft start so that voltage ramps slowly
+ type: boolean
+
+ regulator-initial-mode:
+ description: initial operating mode. The set of possible operating modes
+ depends on the capabilities of every hardware so each device binding
+ documentation explains which values the regulator supports.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+
+ regulator-allowed-modes:
+ description: list of operating modes that software is allowed to configure
+ for the regulator at run-time. Elements may be specified in any order.
+ The set of possible operating modes depends on the capabilities of
+ every hardware so each device binding document explains which values
+ the regulator supports.
+ $ref: "/schemas/types.yaml#/definitions/uint32-array"
+
+ regulator-system-load:
+ description: Load in uA present on regulator that is not captured by
+ any consumer request.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+
+ regulator-pull-down:
+ description: Enable pull down resistor when the regulator is disabled.
+ type: boolean
+
+ regulator-over-current-protection:
+ description: Enable over current protection.
+ type: boolean
+
+ regulator-active-discharge:
+ description: |
+ tristate, enable/disable active discharge of regulators. The values are:
+ 0: Disable active discharge.
+ 1: Enable active discharge.
+ Absence of this property will leave configuration to default.
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - enum: [ 0, 1 ]
+
+ regulator-coupled-with:
+ description: Regulators with which the regulator is coupled. The linkage
+ is 2-way - all coupled regulators should be linked with each other.
+ A regulator should not be coupled with its supplier.
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
+
+ regulator-coupled-max-spread:
+ description: Array of maximum spread between voltages of coupled regulators
+ in microvolts, each value in the array relates to the corresponding
+ couple specified by the regulator-coupled-with property.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+
+ regulator-max-step-microvolt:
+ description: Maximum difference between current and target voltages
+ that can be changed safely in a single step.
+
+patternProperties:
+ ".*-supply$":
+ description: Input supply phandle(s) for this node
+
+ regulator-state-(standby|mem|disk):
+ type: object
+ description:
+ sub-nodes for regulator state in Standby, Suspend-to-RAM, and
+ Suspend-to-DISK modes. Equivalent with standby, mem, and disk Linux
+ sleep states.
+
+ properties:
+ regulator-on-in-suspend:
+ description: regulator should be on in suspend state.
+ type: boolean
+
+ regulator-off-in-suspend:
+ description: regulator should be off in suspend state.
+ type: boolean
+
+ regulator-suspend-min-microvolt:
+ description: minimum voltage may be set in suspend state.
+
+ regulator-suspend-max-microvolt:
+ description: maximum voltage may be set in suspend state.
+
+ regulator-suspend-microvolt:
+ description: the default voltage which regulator would be set in
+ suspend. This property is now deprecated, instead setting voltage
+ for suspend mode via the API which regulator driver provides is
+ recommended.
+
+ regulator-changeable-in-suspend:
+ description: whether the default voltage and the regulator on/off
+ in suspend can be changed in runtime.
+ type: boolean
+
+ regulator-mode:
+ description: operating mode in the given suspend state. The set
+ of possible operating modes depends on the capabilities of every
+ hardware so the valid modes are documented on each regulator device
+ tree binding document.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+
+ additionalProperties: false
+
+examples:
+ - |
+ xyzreg: regulator@0 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ vin-supply = <&vin>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/slg51000.txt b/Documentation/devicetree/bindings/regulator/slg51000.txt
new file mode 100644
index 000000000000..aa0733e49b90
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/slg51000.txt
@@ -0,0 +1,88 @@
+* Dialog Semiconductor SLG51000 Voltage Regulator
+
+Required properties:
+- compatible : Should be "dlg,slg51000" for SLG51000
+- reg : Specifies the I2C slave address.
+- xxx-supply: Input voltage supply regulator for ldo3 to ldo7.
+ These entries are required if regulators are enabled for a device.
+ An absence of these properties can cause the regulator registration to fail.
+ If some of input supply is powered through battery or always-on supply then
+ also it is required to have these parameters with proper node handle of always
+ on power supply.
+ vin3-supply: Input supply for ldo3
+ vin4-supply: Input supply for ldo4
+ vin5-supply: Input supply for ldo5
+ vin6-supply: Input supply for ldo6
+ vin7-supply: Input supply for ldo7
+
+Optional properties:
+- interrupt-parent : Specifies the reference to the interrupt controller.
+- interrupts : IRQ line information.
+- dlg,cs-gpios : Specify a valid GPIO for chip select
+
+Sub-nodes:
+- regulators : This node defines the settings for the regulators.
+ The content of the sub-node is defined by the standard binding
+ for regulators; see regulator.txt.
+
+ The SLG51000 regulators are bound using their names listed below:
+ ldo1
+ ldo2
+ ldo3
+ ldo4
+ ldo5
+ ldo6
+ ldo7
+
+Optional properties for regulators:
+- enable-gpios : Specify a valid GPIO for platform control of the regulator.
+
+Example:
+ pmic: slg51000@75 {
+ compatible = "dlg,slg51000";
+ reg = <0x75>;
+
+ regulators {
+ ldo1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ };
+
+ ldo4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ };
+
+ ldo5 {
+ regulator-name = "ldo5";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo6 {
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo7 {
+ regulator-name = "ldo7";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.txt b/Documentation/devicetree/bindings/regulator/st,stm32-booster.txt
new file mode 100644
index 000000000000..479ad4c8758e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.txt
@@ -0,0 +1,18 @@
+STM32 BOOSTER - Booster for ADC analog input switches
+
+Some STM32 devices embed a 3.3V booster supplied by Vdda, that can be used
+to supply ADC analog input switches.
+
+Required properties:
+- compatible: Should be one of:
+ "st,stm32h7-booster"
+ "st,stm32mp1-booster"
+- st,syscfg: Phandle to system configuration controller.
+- vdda-supply: Phandle to the vdda input analog voltage.
+
+Example:
+ booster: regulator-booster {
+ compatible = "st,stm32mp1-booster";
+ st,syscfg = <&syscfg>;
+ vdda-supply = <&vdda>;
+ };