summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorMahesh Bandewar <maheshb@google.com>2017-10-27 01:09:21 +0300
committerDavid S. Miller <davem@davemloft.net>2017-10-29 12:39:57 +0300
commita190d04db93710ae166749055b6985397c6d13f5 (patch)
tree32db41a469cc840fda9c52aad23369fe02ab2cb7 /Documentation
parent995231c820e3bd3633cb38bf4ea6f2541e1da331 (diff)
downloadlinux-a190d04db93710ae166749055b6985397c6d13f5.tar.xz
ipvlan: introduce 'private' attribute for all existing modes.
IPvlan has always operated in bridge mode. However there are scenarios where each slave should be able to talk through the master device but not necessarily across each other. Think of an environment where each of a namespace is a private and independant customer. In this scenario the machine which is hosting these namespaces neither want to tell who their neighbor is nor the individual namespaces care to talk to neighbor on short-circuited network path. This patch implements the mode that is very similar to the 'private' mode in macvlan where individual slaves can send and receive traffic through the master device, just that they can not talk among slave devices. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/networking/ipvlan.txt30
1 files changed, 27 insertions, 3 deletions
diff --git a/Documentation/networking/ipvlan.txt b/Documentation/networking/ipvlan.txt
index 1fe42a874aae..bfa91c77a4c9 100644
--- a/Documentation/networking/ipvlan.txt
+++ b/Documentation/networking/ipvlan.txt
@@ -22,9 +22,19 @@ The driver can be built into the kernel (CONFIG_IPVLAN=y) or as a module
There are no module parameters for this driver and it can be configured
using IProute2/ip utility.
- ip link add link <master-dev> name <slave-dev> type ipvlan mode { l2 | l3 | l3s }
+ ip link add link <master> name <slave> type ipvlan [ mode MODE ] [ FLAGS ]
+ where
+ MODE: l3 (default) | l3s | l2
+ FLAGS: bridge (default) | private
- e.g. ip link add link eth0 name ipvl0 type ipvlan mode l2
+ e.g.
+ (a) Following will create IPvlan link with eth0 as master in
+ L3 bridge mode
+ bash# ip link add link eth0 name ipvl0 type ipvlan
+ (b) This command will create IPvlan link in L2 bridge mode.
+ bash# ip link add link eth0 name ipvl0 type ipvlan mode l2 bridge
+ (c) This command will create an IPvlan device in L2 private mode.
+ bash# ip link add link eth0 name ipvlan type ipvlan mode l2 private
4. Operating modes:
@@ -54,7 +64,21 @@ works in this mode and hence it is L3-symmetric (L3s). This will have slightly l
performance but that shouldn't matter since you are choosing this mode over plain-L3
mode to make conn-tracking work.
-5. What to choose (macvlan vs. ipvlan)?
+5. Mode flags:
+ At this time following mode flags are available
+
+5.1 bridge:
+ This is the default option. To configure the IPvlan port in this mode,
+user can choose to either add this option on the command-line or don't specify
+anything. This is the traditional mode where slaves can cross-talk among
+themseleves apart from talking through the master device.
+
+5.2 private:
+ If this option is added to the command-line, the port is set in private
+mode. i.e. port wont allow cross communication between slaves.
+
+
+6. What to choose (macvlan vs. ipvlan)?
These two devices are very similar in many regards and the specific use
case could very well define which device to choose. if one of the following
situations defines your use case then you can choose to use ipvlan -