diff options
| author | Dave Airlie <airlied@redhat.com> | 2023-06-19 08:59:52 +0300 |
|---|---|---|
| committer | Dave Airlie <airlied@redhat.com> | 2023-06-19 09:01:25 +0300 |
| commit | cce3b573a52a41dd7face9dbf745f10f9bf4632b (patch) | |
| tree | 4540c11587221cfb90ac9cfb7916b2d2c17c6127 /Documentation | |
| parent | bcbede6fbeb0e1eb85ccbb532faf06d3b31f0e73 (diff) | |
| parent | 45a3e24f65e90a047bef86f927ebdc4c710edaa1 (diff) | |
| download | linux-cce3b573a52a41dd7face9dbf745f10f9bf4632b.tar.xz | |
Backmerge tag 'v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Linux 6.4-rc7
Need this to pull in the msm work.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Diffstat (limited to 'Documentation')
55 files changed, 302 insertions, 188 deletions
diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst index f67c0829350b..e592a9364473 100644 --- a/Documentation/admin-guide/cgroup-v2.rst +++ b/Documentation/admin-guide/cgroup-v2.rst @@ -1213,23 +1213,25 @@ PAGE_SIZE multiple when read back. A read-write single value file which exists on non-root cgroups. The default is "max". - Memory usage throttle limit. This is the main mechanism to - control memory usage of a cgroup. If a cgroup's usage goes + Memory usage throttle limit. If a cgroup's usage goes over the high boundary, the processes of the cgroup are throttled and put under heavy reclaim pressure. Going over the high limit never invokes the OOM killer and - under extreme conditions the limit may be breached. + under extreme conditions the limit may be breached. The high + limit should be used in scenarios where an external process + monitors the limited cgroup to alleviate heavy reclaim + pressure. memory.max A read-write single value file which exists on non-root cgroups. The default is "max". - Memory usage hard limit. This is the final protection - mechanism. If a cgroup's memory usage reaches this limit and - can't be reduced, the OOM killer is invoked in the cgroup. - Under certain circumstances, the usage may go over the limit - temporarily. + Memory usage hard limit. This is the main mechanism to limit + memory usage of a cgroup. If a cgroup's memory usage reaches + this limit and can't be reduced, the OOM killer is invoked in + the cgroup. Under certain circumstances, the usage may go + over the limit temporarily. In default configuration regular 0-order allocations always succeed unless OOM killer chooses current task as a victim. @@ -1238,10 +1240,6 @@ PAGE_SIZE multiple when read back. Caller could retry them differently, return into userspace as -ENOMEM or silently ignore in cases like disk readahead. - This is the ultimate protection mechanism. As long as the - high limit is used and monitored properly, this limit's - utility is limited to providing the final safety net. - memory.reclaim A write-only nested-keyed file which exists for all cgroups. diff --git a/Documentation/admin-guide/cifs/changes.rst b/Documentation/admin-guide/cifs/changes.rst index 3147bbae9c43..8c42c4de510b 100644 --- a/Documentation/admin-guide/cifs/changes.rst +++ b/Documentation/admin-guide/cifs/changes.rst @@ -5,5 +5,5 @@ Changes See https://wiki.samba.org/index.php/LinuxCIFSKernel for summary information about fixes/improvements to CIFS/SMB2/SMB3 support (changes to cifs.ko module) by kernel version (and cifs internal module version). -This may be easier to read than parsing the output of "git log fs/cifs" -by release. +This may be easier to read than parsing the output of +"git log fs/smb/client" by release. diff --git a/Documentation/admin-guide/cifs/usage.rst b/Documentation/admin-guide/cifs/usage.rst index 2e151cd8c2e4..5f936b4b6018 100644 --- a/Documentation/admin-guide/cifs/usage.rst +++ b/Documentation/admin-guide/cifs/usage.rst @@ -45,7 +45,7 @@ Installation instructions If you have built the CIFS vfs as module (successfully) simply type ``make modules_install`` (or if you prefer, manually copy the file to -the modules directory e.g. /lib/modules/2.4.10-4GB/kernel/fs/cifs/cifs.ko). +the modules directory e.g. /lib/modules/6.3.0-060300-generic/kernel/fs/smb/client/cifs.ko). If you have built the CIFS vfs into the kernel itself, follow the instructions for your distribution on how to install a new kernel (usually you @@ -66,15 +66,15 @@ If cifs is built as a module, then the size and number of network buffers and maximum number of simultaneous requests to one server can be configured. Changing these from their defaults is not recommended. By executing modinfo:: - modinfo kernel/fs/cifs/cifs.ko + modinfo <path to cifs.ko> -on kernel/fs/cifs/cifs.ko the list of configuration changes that can be made +on kernel/fs/smb/client/cifs.ko the list of configuration changes that can be made at module initialization time (by running insmod cifs.ko) can be seen. Recommendations =============== -To improve security the SMB2.1 dialect or later (usually will get SMB3) is now +To improve security the SMB2.1 dialect or later (usually will get SMB3.1.1) is now the new default. To use old dialects (e.g. to mount Windows XP) use "vers=1.0" on mount (or vers=2.0 for Windows Vista). Note that the CIFS (vers=1.0) is much older and less secure than the default dialect SMB3 which includes diff --git a/Documentation/admin-guide/quickly-build-trimmed-linux.rst b/Documentation/admin-guide/quickly-build-trimmed-linux.rst index ff4f4cc8522b..f08149bc53f8 100644 --- a/Documentation/admin-guide/quickly-build-trimmed-linux.rst +++ b/Documentation/admin-guide/quickly-build-trimmed-linux.rst @@ -215,12 +215,14 @@ again. reduce the compile time enormously, especially if you are running an universal kernel from a commodity Linux distribution. - There is a catch: the make target 'localmodconfig' will disable kernel - features you have not directly or indirectly through some program utilized - since you booted the system. You can reduce or nearly eliminate that risk by - using tricks outlined in the reference section; for quick testing purposes - that risk is often negligible, but it is an aspect you want to keep in mind - in case your kernel behaves oddly. + There is a catch: 'localmodconfig' is likely to disable kernel features you + did not use since you booted your Linux -- like drivers for currently + disconnected peripherals or a virtualization software not haven't used yet. + You can reduce or nearly eliminate that risk with tricks the reference + section outlines; but when building a kernel just for quick testing purposes + it is often negligible if such features are missing. But you should keep that + aspect in mind when using a kernel built with this make target, as it might + be the reason why something you only use occasionally stopped working. [:ref:`details<configuration>`] @@ -271,6 +273,9 @@ again. does nothing at all; in that case you have to manually install your kernel, as outlined in the reference section. + If you are running a immutable Linux distribution, check its documentation + and the web to find out how to install your own kernel there. + [:ref:`details<install>`] .. _another_sbs: @@ -291,29 +296,29 @@ again. version you care about, as git otherwise might retrieve the entire commit history:: - git fetch --shallow-exclude=v6.1 origin - - If you modified the sources (for example by applying a patch), you now need - to discard those modifications; that's because git otherwise will not be able - to switch to the sources of another version due to potential conflicting - changes:: - - git reset --hard + git fetch --shallow-exclude=v6.0 origin - Now checkout the version you are interested in, as explained above:: + Now switch to the version you are interested in -- but be aware the command + used here will discard any modifications you performed, as they would + conflict with the sources you want to checkout:: - git checkout --detach origin/master + git checkout --force --detach origin/master At this point you might want to patch the sources again or set/modify a build - tag, as explained earlier; afterwards adjust the build configuration to the - new codebase and build your next kernel:: + tag, as explained earlier. Afterwards adjust the build configuration to the + new codebase using olddefconfig, which will now adjust the configuration file + you prepared earlier using localmodconfig (~/linux/.config) for your next + kernel:: # reminder: if you want to apply patches, do it at this point # reminder: you might want to update your build tag at this point make olddefconfig + + Now build your kernel:: + make -j $(nproc --all) - Install the kernel as outlined above:: + Afterwards install the kernel as outlined above:: command -v installkernel && sudo make modules_install install @@ -584,11 +589,11 @@ versions and individual commits at hand at any time:: curl -L \ https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/clone.bundle \ -o linux-stable.git.bundle - git clone clone.bundle ~/linux/ + git clone linux-stable.git.bundle ~/linux/ rm linux-stable.git.bundle cd ~/linux/ - git remote set-url origin - https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git + git remote set-url origin \ + https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git git fetch origin git checkout --detach origin/master diff --git a/Documentation/cdrom/index.rst b/Documentation/cdrom/index.rst index e87a8785bc1a..e9b022d70939 100644 --- a/Documentation/cdrom/index.rst +++ b/Documentation/cdrom/index.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0 -===== -cdrom -===== +====== +CD-ROM +====== .. toctree:: :maxdepth: 1 diff --git a/Documentation/devicetree/bindings/ata/ahci-common.yaml b/Documentation/devicetree/bindings/ata/ahci-common.yaml index 7fdf40954a4c..38770c4c85fd 100644 --- a/Documentation/devicetree/bindings/ata/ahci-common.yaml +++ b/Documentation/devicetree/bindings/ata/ahci-common.yaml @@ -8,7 +8,7 @@ title: Common Properties for Serial ATA AHCI controllers maintainers: - Hans de Goede <hdegoede@redhat.com> - - Damien Le Moal <damien.lemoal@opensource.wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: This document defines device tree properties for a common AHCI SATA diff --git a/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml index 9b31f864e071..71364c6081ff 100644 --- a/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml +++ b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml @@ -32,7 +32,7 @@ properties: maxItems: 1 iommus: - maxItems: 1 + maxItems: 4 power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml index d8b91944180a..44892aa589fd 100644 --- a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml +++ b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml @@ -129,6 +129,7 @@ allOf: - qcom,sm8250-llcc - qcom,sm8350-llcc - qcom,sm8450-llcc + - qcom,sm8550-llcc then: properties: reg: diff --git a/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml index 998e5cce652f..380cb6d80025 100644 --- a/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml +++ b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Canaan Kendryte K210 Clock maintainers: - - Damien Le Moal <damien.lemoal@wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: | Canaan Kendryte K210 SoC clocks driver bindings. The clock diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index e6c1ebfe8a32..130e16d025bc 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -82,6 +82,18 @@ properties: Indicates if the DSI controller is driving a panel which needs 2 DSI links. + qcom,master-dsi: + type: boolean + description: | + Indicates if the DSI controller is the master DSI controller when + qcom,dual-dsi-mode enabled. + + qcom,sync-dual-dsi: + type: boolean + description: | + Indicates if the DSI controller needs to sync the other DSI controller + with MIPI DCS commands when qcom,dual-dsi-mode enabled. + assigned-clocks: minItems: 2 maxItems: 4 diff --git a/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml b/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml index 4fb05eb84e2a..164331eb6275 100644 --- a/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml +++ b/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Lattice Slave SPI sysCONFIG FPGA manager maintainers: - - Ivan Bornyakov <i.bornyakov@metrotek.ru> + - Vladimir Georgiev <v.georgiev@metrotek.ru> description: | Lattice sysCONFIG port, which is used for FPGA configuration, among others, diff --git a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml index 527532f039ce..a157eecfb5fc 100644 --- a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml +++ b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Microchip Polarfire FPGA manager. maintainers: - - Ivan Bornyakov <i.bornyakov@metrotek.ru> + - Vladimir Georgiev <v.georgiev@metrotek.ru> description: Device Tree Bindings for Microchip Polarfire FPGA Manager using slave SPI to diff --git a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml index 62f3ca66274f..32c821f97779 100644 --- a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml +++ b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml @@ -44,7 +44,7 @@ required: - clock-names - clocks -additionalProperties: true +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml index 63369ba388e4..0a192ca192c5 100644 --- a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml @@ -39,6 +39,12 @@ properties: power-domains: maxItems: 1 + vref-supply: + description: | + External ADC reference voltage supply on VREFH pad. If VERID[MVI] is + set, there are additional, internal reference voltages selectable. + VREFH1 is always from VREFH pad. + "#io-channel-cells": const: 1 @@ -72,6 +78,7 @@ examples: assigned-clocks = <&clk IMX_SC_R_ADC_0>; assigned-clock-rates = <24000000>; power-domains = <&pd IMX_SC_R_ADC_0>; + vref-supply = <®_1v8>; #io-channel-cells = <1>; }; }; diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml index 1c7aee5ed3e0..36dff3250ea7 100644 --- a/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml @@ -90,7 +90,7 @@ patternProperties: of the MAX chips to the GyroADC, while MISO line of each Maxim ADC connects to a shared input pin of the GyroADC. enum: - - adi,7476 + - adi,ad7476 - fujitsu,mb88101a - maxim,max1162 - maxim,max11100 diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index 92117261e1e1..39e64c7f6360 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -166,6 +166,12 @@ properties: resets: maxItems: 1 + mediatek,broken-save-restore-fw: + type: boolean + description: + Asserts that the firmware on this device has issues saving and restoring + GICR registers when the GIC redistributors are powered off. + dependencies: mbi-ranges: [ msi-controller ] msi-controller: [ mbi-ranges ] diff --git a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml index 8459d3642205..3b3beab9db3f 100644 --- a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml +++ b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Canaan Kendryte K210 System Controller maintainers: - - Damien Le Moal <damien.lemoal@wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: Canaan Inc. Kendryte K210 SoC system controller which provides a diff --git a/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml index 769fa5c27b76..de1d4298893b 100644 --- a/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml +++ b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml @@ -21,11 +21,22 @@ properties: st,can-primary: description: - Primary and secondary mode of the bxCAN peripheral is only relevant - if the chip has two CAN peripherals. In that case they share some - of the required logic. + Primary mode of the bxCAN peripheral is only relevant if the chip has + two CAN peripherals in dual CAN configuration. In that case they share + some of the required logic. + Not to be used if the peripheral is in single CAN configuration. To avoid misunderstandings, it should be noted that ST documentation - uses the terms master/slave instead of primary/secondary. + uses the terms master instead of primary. + type: boolean + + st,can-secondary: + description: + Secondary mode of the bxCAN peripheral is only relevant if the chip + has two CAN peripherals in dual CAN configuration. In that case they + share some of the required logic. + Not to be used if the peripheral is in single CAN configuration. + To avoid misunderstandings, it should be noted that ST documentation + uses the terms slave instead of secondary. type: boolean reg: diff --git a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml index 8cc2b9924680..043e118c605c 100644 --- a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml @@ -11,7 +11,7 @@ maintainers: - Alistair Francis <alistair@alistair23.me> description: - RTL8723CS/RTL8723CS/RTL8821CS/RTL8822CS is a WiFi + BT chip. WiFi part + RTL8723BS/RTL8723CS/RTL8821CS/RTL8822CS is a WiFi + BT chip. WiFi part is connected over SDIO, while BT is connected over serial. It speaks H5 protocol with few extra commands to upload firmware and change module speed. @@ -27,7 +27,7 @@ properties: - items: - enum: - realtek,rtl8821cs-bt - - const: realtek,rtl8822cs-bt + - const: realtek,rtl8723bs-bt device-wake-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml index 7f4f36a58e56..739a08f00467 100644 --- a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml +++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Canaan Kendryte K210 FPIOA maintainers: - - Damien Le Moal <damien.lemoal@wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: The Canaan Kendryte K210 SoC Fully Programmable IO Array (FPIOA) diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml index c91d3e3a094b..80f960671857 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml @@ -144,8 +144,9 @@ $defs: enum: [0, 1, 2, 3, 4, 5, 6, 7] qcom,paired: - - description: - Indicates that the pin should be operating in paired mode. + type: boolean + description: + Indicates that the pin should be operating in paired mode. required: - pins diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml index afad3135ed67..f9c211a9a938 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml @@ -29,6 +29,7 @@ properties: - qcom,qcm2290-rpmpd - qcom,qcs404-rpmpd - qcom,qdu1000-rpmhpd + - qcom,sa8155p-rpmhpd - qcom,sa8540p-rpmhpd - qcom,sa8775p-rpmhpd - qcom,sdm660-rpmpd diff --git a/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml b/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml index ee8a2dcf5dfa..0c0135964b91 100644 --- a/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml +++ b/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Canaan Kendryte K210 Reset Controller maintainers: - - Damien Le Moal <damien.lemoal@wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: | Canaan Kendryte K210 reset controller driver which supports the SoC diff --git a/Documentation/devicetree/bindings/riscv/canaan.yaml b/Documentation/devicetree/bindings/riscv/canaan.yaml index f8f3f286bd55..41fd11f70a49 100644 --- a/Documentation/devicetree/bindings/riscv/canaan.yaml +++ b/Documentation/devicetree/bindings/riscv/canaan.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Canaan SoC-based boards maintainers: - - Damien Le Moal <damien.lemoal@wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: Canaan Kendryte K210 SoC-based boards diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml index eb3488d8f9ee..6a7be42da523 100644 --- a/Documentation/devicetree/bindings/serial/8250_omap.yaml +++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml @@ -70,6 +70,7 @@ properties: dsr-gpios: true rng-gpios: true dcd-gpios: true + rs485-rts-active-high: true rts-gpio: true power-domains: true clock-frequency: true diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml index a5bb561bfcfb..31a3024ea789 100644 --- a/Documentation/devicetree/bindings/sound/tas2562.yaml +++ b/Documentation/devicetree/bindings/sound/tas2562.yaml @@ -55,7 +55,9 @@ properties: description: TDM TX current sense time slot. '#sound-dai-cells': - const: 1 + # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward + # compatibility but is deprecated. + enum: [0, 1] required: - compatible @@ -72,7 +74,7 @@ examples: codec: codec@4c { compatible = "ti,tas2562"; reg = <0x4c>; - #sound-dai-cells = <1>; + #sound-dai-cells = <0>; interrupt-parent = <&gpio1>; interrupts = <14>; shutdown-gpios = <&gpio1 15 0>; diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml index 26088adb9dc2..8908bf1122e9 100644 --- a/Documentation/devicetree/bindings/sound/tas2770.yaml +++ b/Documentation/devicetree/bindings/sound/tas2770.yaml @@ -57,7 +57,9 @@ properties: - 1 # Falling edge '#sound-dai-cells': - const: 1 + # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward + # compatibility but is deprecated. + enum: [0, 1] required: - compatible @@ -74,7 +76,7 @@ examples: codec: codec@41 { compatible = "ti,tas2770"; reg = <0x41>; - #sound-dai-cells = <1>; + #sound-dai-cells = <0>; interrupt-parent = <&gpio1>; interrupts = <14>; reset-gpio = <&gpio1 15 0>; diff --git a/Documentation/devicetree/bindings/sound/tas27xx.yaml b/Documentation/devicetree/bindings/sound/tas27xx.yaml index 8cba01316855..a876545ec87d 100644 --- a/Documentation/devicetree/bindings/sound/tas27xx.yaml +++ b/Documentation/devicetree/bindings/sound/tas27xx.yaml @@ -50,7 +50,9 @@ properties: description: TDM TX voltage sense time slot. '#sound-dai-cells': - const: 1 + # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward + # compatibility but is deprecated. + enum: [0, 1] required: - compatible @@ -67,7 +69,7 @@ examples: codec: codec@38 { compatible = "ti,tas2764"; reg = <0x38>; - #sound-dai-cells = <1>; + #sound-dai-cells = <0>; interrupt-parent = <&gpio1>; interrupts = <14>; reset-gpios = <&gpio1 15 0>; diff --git a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt index f59125bc79d1..0b4e21bde5bc 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt @@ -8,7 +8,7 @@ Required properties: "ti,tlv320aic32x6" TLV320AIC3206, TLV320AIC3256 "ti,tas2505" TAS2505, TAS2521 - reg: I2C slave address - - supply-*: Required supply regulators are: + - *-supply: Required supply regulators are: "iov" - digital IO power supply "ldoin" - LDO power supply "dv" - Digital core power supply diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml index cae46c4982ad..69a93a0722f0 100644 --- a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml +++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml @@ -64,7 +64,7 @@ properties: description: size of memory intended as internal memory for endpoints buffers expressed in KB - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint16 cdns,phyrst-a-enable: description: Enable resetting of PHY if Rx fail is detected diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml index 50edc4da780e..4f7625955ccc 100644 --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -287,7 +287,7 @@ properties: description: High-Speed PHY interface selection between UTMI+ and ULPI when the DWC_USB3_HSPHY_INTERFACE has value 3. - $ref: /schemas/types.yaml#/definitions/uint8 + $ref: /schemas/types.yaml#/definitions/string enum: [utmi, ulpi] snps,quirk-frame-length-adjustment: diff --git a/Documentation/devicetree/usage-model.rst b/Documentation/devicetree/usage-model.rst index b6a287955ee5..0717426856b2 100644 --- a/Documentation/devicetree/usage-model.rst +++ b/Documentation/devicetree/usage-model.rst @@ -415,6 +415,6 @@ When using the DT, this creates problems for of_platform_populate() because it must decide whether to register each node as either a platform_device or an amba_device. This unfortunately complicates the device creation model a little bit, but the solution turns out not to -be too invasive. If a node is compatible with "arm,amba-primecell", then +be too invasive. If a node is compatible with "arm,primecell", then of_platform_populate() will register it as an amba_device instead of a platform_device. diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst index fbb2b5ada95b..eb252fc972aa 100644 --- a/Documentation/filesystems/index.rst +++ b/Documentation/filesystems/index.rst @@ -72,7 +72,6 @@ Documentation for filesystem implementations. befs bfs btrfs - cifs/index ceph coda configfs @@ -111,6 +110,7 @@ Documentation for filesystem implementations. ramfs-rootfs-initramfs relay romfs + smb/index spufs/index squashfs sysfs diff --git a/Documentation/filesystems/ramfs-rootfs-initramfs.rst b/Documentation/filesystems/ramfs-rootfs-initramfs.rst index 164960631925..447f767c6462 100644 --- a/Documentation/filesystems/ramfs-rootfs-initramfs.rst +++ b/Documentation/filesystems/ramfs-rootfs-initramfs.rst @@ -6,8 +6,7 @@ Ramfs, rootfs and initramfs October 17, 2005 -Rob Landley <rob@landley.net> -============================= +:Author: Rob Landley <rob@landley.net> What is ramfs? -------------- diff --git a/Documentation/filesystems/sharedsubtree.rst b/Documentation/filesystems/sharedsubtree.rst index d83395354250..1cf56489ed48 100644 --- a/Documentation/filesystems/sharedsubtree.rst +++ b/Documentation/filesystems/sharedsubtree.rst @@ -147,6 +147,7 @@ replicas continue to be exactly same. 3) Setting mount states +----------------------- The mount command (util-linux package) can be used to set mount states:: @@ -612,6 +613,7 @@ replicas continue to be exactly same. 6) Quiz +------- A. What is the result of the following command sequence? @@ -673,6 +675,7 @@ replicas continue to be exactly same. /mnt/1/test be? 7) FAQ +------ Q1. Why is bind mount needed? How is it different from symbolic links? symbolic links can get stale if the destination mount gets @@ -841,6 +844,7 @@ replicas continue to be exactly same. tmp usr tmp usr tmp usr 8) Implementation +----------------- 8A) Datastructure diff --git a/Documentation/filesystems/cifs/cifsroot.rst b/Documentation/filesystems/smb/cifsroot.rst index 4930bb443134..bf2d9db3acb9 100644 --- a/Documentation/filesystems/cifs/cifsroot.rst +++ b/Documentation/filesystems/smb/cifsroot.rst @@ -59,7 +59,7 @@ the root file system via SMB protocol. Enables the kernel to mount the root file system via SMB that are located in the <server-ip> and <share> specified in this option. -The default mount options are set in fs/cifs/cifsroot.c. +The default mount options are set in fs/smb/client/cifsroot.c. server-ip IPv4 address of the server. diff --git a/Documentation/filesystems/cifs/index.rst b/Documentation/filesystems/smb/index.rst index 1c8597a679ab..1c8597a679ab 100644 --- a/Documentation/filesystems/cifs/index.rst +++ b/Documentation/filesystems/smb/index.rst diff --git a/Documentation/filesystems/cifs/ksmbd.rst b/Documentation/filesystems/smb/ksmbd.rst index 7bed96d794fc..7bed96d794fc 100644 --- a/Documentation/filesystems/cifs/ksmbd.rst +++ b/Documentation/filesystems/smb/ksmbd.rst diff --git a/Documentation/fpga/index.rst b/Documentation/fpga/index.rst index f80f95667ca2..43c968871d99 100644 --- a/Documentation/fpga/index.rst +++ b/Documentation/fpga/index.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0 ==== -fpga +FPGA ==== .. toctree:: diff --git a/Documentation/locking/index.rst b/Documentation/locking/index.rst index 7003bd5aeff4..6a9ea96c8bcb 100644 --- a/Documentation/locking/index.rst +++ b/Documentation/locking/index.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0 ======= -locking +Locking ======= .. toctree:: diff --git a/Documentation/mm/page_table_check.rst b/Documentation/mm/page_table_check.rst index cfd8f4117cf3..c12838ce6b8d 100644 --- a/Documentation/mm/page_table_check.rst +++ b/Documentation/mm/page_table_check.rst @@ -52,3 +52,22 @@ Build kernel with: Optionally, build kernel with PAGE_TABLE_CHECK_ENFORCED in order to have page table support without extra kernel parameter. + +Implementation notes +==================== + +We specifically decided not to use VMA information in order to avoid relying on +MM states (except for limited "struct page" info). The page table check is a +separate from Linux-MM state machine that verifies that the user accessible +pages are not falsely shared. + +PAGE_TABLE_CHECK depends on EXCLUSIVE_SYSTEM_RAM. The reason is that without +EXCLUSIVE_SYSTEM_RAM, users are allowed to map arbitrary physical memory +regions into the userspace via /dev/mem. At the same time, pages may change +their properties (e.g., from anonymous pages to named pages) while they are +still being mapped in the userspace, leading to "corruption" detected by the +page table check. + +Even with EXCLUSIVE_SYSTEM_RAM, I/O pages may be still allowed to be mapped via +/dev/mem. However, these pages are always considered as named pages, so they +won't break the logic used in the page table check. diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml index 129f413ea349..4846345bade4 100644 --- a/Documentation/netlink/specs/ethtool.yaml +++ b/Documentation/netlink/specs/ethtool.yaml @@ -61,22 +61,6 @@ attribute-sets: nested-attributes: bitset-bits - - name: u64-array - attributes: - - - name: u64 - type: nest - multi-attr: true - nested-attributes: u64 - - - name: s32-array - attributes: - - - name: s32 - type: nest - multi-attr: true - nested-attributes: s32 - - name: string attributes: - @@ -239,7 +223,7 @@ attribute-sets: name: tx-min-frag-size type: u32 - - name: tx-min-frag-size + name: rx-min-frag-size type: u32 - name: verify-enabled @@ -310,7 +294,7 @@ attribute-sets: name: master-slave-state type: u8 - - name: master-slave-lanes + name: lanes type: u32 - name: rate-matching @@ -338,7 +322,7 @@ attribute-sets: name: ext-substate type: u8 - - name: down-cnt + name: ext-down-cnt type: u32 - name: debug @@ -593,7 +577,7 @@ attribute-sets: name: phc-index type: u32 - - name: cable-test-nft-nest-result + name: cable-test-ntf-nest-result attributes: - name: pair @@ -602,7 +586,7 @@ attribute-sets: name: code type: u8 - - name: cable-test-nft-nest-fault-length + name: cable-test-ntf-nest-fault-length attributes: - name: pair @@ -611,16 +595,16 @@ attribute-sets: name: cm type: u32 - - name: cable-test-nft-nest + name: cable-test-ntf-nest attributes: - name: result type: nest - nested-attributes: cable-test-nft-nest-result + nested-attributes: cable-test-ntf-nest-result - name: fault-length type: nest - nested-attributes: cable-test-nft-nest-fault-length + nested-attributes: cable-test-ntf-nest-fault-length - name: cable-test attributes: @@ -634,7 +618,7 @@ attribute-sets: - name: nest type: nest - nested-attributes: cable-test-nft-nest + nested-attributes: cable-test-ntf-nest - name: cable-test-tdr-cfg attributes: @@ -705,16 +689,16 @@ attribute-sets: type: u8 - name: corrected - type: nest - nested-attributes: u64-array + type: binary + sub-type: u64 - name: uncorr - type: nest - nested-attributes: u64-array + type: binary + sub-type: u64 - name: corr-bits - type: nest - nested-attributes: u64-array + type: binary + sub-type: u64 - name: fec attributes: @@ -792,7 +776,7 @@ attribute-sets: name: hist-bkt-hi type: u32 - - name: hist-bkt-val + name: hist-val type: u64 - name: stats @@ -827,8 +811,8 @@ attribute-sets: type: u32 - name: index - type: nest - nested-attributes: s32-array + type: binary + sub-type: s32 - name: module attributes: @@ -981,7 +965,7 @@ operations: - duplex - master-slave-cfg - master-slave-state - - master-slave-lanes + - lanes - rate-matching dump: *linkmodes-get-op - @@ -1015,7 +999,7 @@ operations: - sqi-max - ext-state - ext-substate - - down-cnt + - ext-down-cnt dump: *linkstate-get-op - name: debug-get @@ -1367,7 +1351,7 @@ operations: reply: attributes: - header - - cable-test-nft-nest + - cable-test-ntf-nest - name: cable-test-tdr-act doc: Cable test TDR. @@ -1555,7 +1539,7 @@ operations: - hkey dump: *rss-get-op - - name: plca-get + name: plca-get-cfg doc: Get PLCA params. attribute-set: plca @@ -1577,7 +1561,7 @@ operations: - burst-tmr dump: *plca-get-op - - name: plca-set + name: plca-set-cfg doc: Set PLCA params. attribute-set: plca @@ -1601,7 +1585,7 @@ operations: - name: plca-ntf doc: Notification for change in PLCA params. - notify: plca-get + notify: plca-get-cfg - name: mm-get doc: Get MAC Merge configuration and state diff --git a/Documentation/netlink/specs/handshake.yaml b/Documentation/netlink/specs/handshake.yaml index 614f1a585511..6d89e30f5fd5 100644 --- a/Documentation/netlink/specs/handshake.yaml +++ b/Documentation/netlink/specs/handshake.yaml @@ -68,6 +68,9 @@ attribute-sets: type: nest nested-attributes: x509 multi-attr: true + - + name: peername + type: string - name: done attributes: @@ -105,6 +108,7 @@ operations: - auth-mode - peer-identity - certificate + - peername - name: done doc: Handler reports handshake completion diff --git a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst index 3a7a714cc08f..3354ca3608ee 100644 --- a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst +++ b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst @@ -40,6 +40,7 @@ flow_steering_mode: Device flow steering mode --------------------------------------------- The flow steering mode parameter controls the flow steering mode of the driver. Two modes are supported: + 1. 'dmfs' - Device managed flow steering. 2. 'smfs' - Software/Driver managed flow steering. @@ -99,6 +100,7 @@ between representors and stacked devices. By default metadata is enabled on the supported devices in E-switch. Metadata is applicable only for E-switch in switchdev mode and users may disable it when NONE of the below use cases will be in use: + 1. HCA is in Dual/multi-port RoCE mode. 2. VF/SF representor bonding (Usually used for Live migration) 3. Stacked devices @@ -180,7 +182,8 @@ User commands examples: $ devlink health diagnose pci/0000:82:00.0 reporter tx -NOTE: This command has valid output only when interface is up, otherwise the command has empty output. +.. note:: + This command has valid output only when interface is up, otherwise the command has empty output. - Show number of tx errors indicated, number of recover flows ended successfully, is autorecover enabled and graceful period from last recover:: @@ -232,8 +235,9 @@ User commands examples: $ devlink health dump show pci/0000:82:00.0 reporter fw -NOTE: This command can run only on the PF which has fw tracer ownership, -running it on other PF or any VF will return "Operation not permitted". +.. note:: + This command can run only on the PF which has fw tracer ownership, + running it on other PF or any VF will return "Operation not permitted". fw fatal reporter ----------------- @@ -256,7 +260,8 @@ User commands examples: $ devlink health dump show pci/0000:82:00.1 reporter fw_fatal -NOTE: This command can run only on PF. +.. note:: + This command can run only on PF. vnic reporter ------------- @@ -265,28 +270,37 @@ It is responsible for querying the vnic diagnostic counters from fw and displayi them in realtime. Description of the vnic counters: -total_q_under_processor_handle: number of queues in an error state due to -an async error or errored command. -send_queue_priority_update_flow: number of QP/SQ priority/SL update -events. -cq_overrun: number of times CQ entered an error state due to an -overflow. -async_eq_overrun: number of times an EQ mapped to async events was -overrun. -comp_eq_overrun: number of times an EQ mapped to completion events was -overrun. -quota_exceeded_command: number of commands issued and failed due to quota -exceeded. -invalid_command: number of commands issued and failed dues to any reason -other than quota exceeded. -nic_receive_steering_discard: number of packets that completed RX flow -steering but were discarded due to a mismatch in flow table. + +- total_q_under_processor_handle + number of queues in an error state due to + an async error or errored command. +- send_queue_priority_update_flow + number of QP/SQ priority/SL update events. +- cq_overrun + number of times CQ entered an error state due to an overflow. +- async_eq_overrun + number of times an EQ mapped to async events was overrun. + comp_eq_overrun number of times an EQ mapped to completion events was + overrun. +- quota_exceeded_command + number of commands issued and failed due to quota exceeded. +- invalid_command + number of commands issued and failed dues to any reason other than quota + exceeded. +- nic_receive_steering_discard + number of packets that completed RX flow + steering but were discarded due to a mismatch in flow table. User commands examples: -- Diagnose PF/VF vnic counters + +- Diagnose PF/VF vnic counters:: + $ devlink health diagnose pci/0000:82:00.1 reporter vnic + - Diagnose representor vnic counters (performed by supplying devlink port of the - representor, which can be obtained via devlink port command) + representor, which can be obtained via devlink port command):: + $ devlink health diagnose pci/0000:82:00.1/65537 reporter vnic -NOTE: This command can run over all interfaces such as PF/VF and representor ports. +.. note:: + This command can run over all interfaces such as PF/VF and representor ports. diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst index 6ec06a33688a..80b8f73a0244 100644 --- a/Documentation/networking/ip-sysctl.rst +++ b/Documentation/networking/ip-sysctl.rst @@ -1352,8 +1352,8 @@ ping_group_range - 2 INTEGERS Restrict ICMP_PROTO datagram sockets to users in the group range. The default is "1 0", meaning, that nobody (not even root) may create ping sockets. Setting it to "100 100" would grant permissions - to the single group. "0 4294967295" would enable it for the world, "100 - 4294967295" would enable it for the users, but not daemons. + to the single group. "0 4294967294" would enable it for the world, "100 + 4294967294" would enable it for the users, but not daemons. tcp_early_demux - BOOLEAN Enable early demux for established TCP sockets. diff --git a/Documentation/networking/tls-handshake.rst b/Documentation/networking/tls-handshake.rst index a2817a88e905..6f5ea1646a47 100644 --- a/Documentation/networking/tls-handshake.rst +++ b/Documentation/networking/tls-handshake.rst @@ -53,6 +53,7 @@ fills in a structure that contains the parameters of the request: struct socket *ta_sock; tls_done_func_t ta_done; void *ta_data; + const char *ta_peername; unsigned int ta_timeout_ms; key_serial_t ta_keyring; key_serial_t ta_my_cert; @@ -71,6 +72,10 @@ instantiated a struct file in sock->file. has completed. Further explanation of this function is in the "Handshake Completion" sesction below. +The consumer can provide a NUL-terminated hostname in the @ta_peername +field that is sent as part of ClientHello. If no peername is provided, +the DNS hostname associated with the server's IP address is used instead. + The consumer can fill in the @ta_timeout_ms field to force the servicing handshake agent to exit after a number of milliseconds. This enables the socket to be fully closed once both the kernel and the handshake agent diff --git a/Documentation/pcmcia/index.rst b/Documentation/pcmcia/index.rst index 7ae1f62fca14..8067236c51ab 100644 --- a/Documentation/pcmcia/index.rst +++ b/Documentation/pcmcia/index.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0 ====== -pcmcia +PCMCIA ====== .. toctree:: diff --git a/Documentation/process/maintainer-netdev.rst b/Documentation/process/maintainer-netdev.rst index f73ac9e175a8..83614cec9328 100644 --- a/Documentation/process/maintainer-netdev.rst +++ b/Documentation/process/maintainer-netdev.rst @@ -127,13 +127,32 @@ the value of ``Message-ID`` to the URL above. Updating patch status ~~~~~~~~~~~~~~~~~~~~~ -It may be tempting to help the maintainers and update the state of your -own patches when you post a new version or spot a bug. Please **do not** -do that. -Interfering with the patch status on patchwork will only cause confusion. Leave -it to the maintainer to figure out what is the most recent and current -version that should be applied. If there is any doubt, the maintainer -will reply and ask what should be done. +Contributors and reviewers do not have the permissions to update patch +state directly in patchwork. Patchwork doesn't expose much information +about the history of the state of patches, therefore having multiple +people update the state leads to confusion. + +Instead of delegating patchwork permissions netdev uses a simple mail +bot which looks for special commands/lines within the emails sent to +the mailing list. For example to mark a series as Changes Requested +one needs to send the following line anywhere in the email thread:: + + pw-bot: changes-requested + +As a result the bot will set the entire series to Changes Requested. +This may be useful when author discovers a bug in their own series +and wants to prevent it from getting applied. + +The use of the bot is entirely optional, if in doubt ignore its existence +completely. Maintainers will classify and update the state of the patches +themselves. No email should ever be sent to the list with the main purpose +of communicating with the bot, the bot commands should be seen as metadata. + +The use of the bot is restricted to authors of the patches (the ``From:`` +header on patch submission and command must match!), maintainers themselves +and a handful of senior reviewers. Bot records its activity here: + + https://patchwork.hopto.org/pw-bot.html Review timelines ~~~~~~~~~~~~~~~~ diff --git a/Documentation/riscv/patch-acceptance.rst b/Documentation/riscv/patch-acceptance.rst index 07d5a5623e2a..634aa222b410 100644 --- a/Documentation/riscv/patch-acceptance.rst +++ b/Documentation/riscv/patch-acceptance.rst @@ -16,6 +16,24 @@ tested code over experimental code. We wish to extend these same principles to the RISC-V-related code that will be accepted for inclusion in the kernel. +Patchwork +--------- + +RISC-V has a patchwork instance, where the status of patches can be checked: + + https://patchwork.kernel.org/project/linux-riscv/list/ + +If your patch does not appear in the default view, the RISC-V maintainers have +likely either requested changes, or expect it to be applied to another tree. + +Automation runs against this patchwork instance, building/testing patches as +they arrive. The automation applies patches against the current HEAD of the +RISC-V `for-next` and `fixes` branches, depending on whether the patch has been +detected as a fix. Failing those, it will use the RISC-V `master` branch. +The exact commit to which a series has been applied will be noted on patchwork. +Patches for which any of the checks fail are unlikely to be applied and in most +cases will need to be resubmitted. + Submit Checklist Addendum ------------------------- We'll only accept patches for new modules or extensions if the diff --git a/Documentation/s390/vfio-ap.rst b/Documentation/s390/vfio-ap.rst index d46e98c7c1ec..bb3f4c4e2885 100644 --- a/Documentation/s390/vfio-ap.rst +++ b/Documentation/s390/vfio-ap.rst @@ -551,7 +551,6 @@ These are the steps: * IOMMU_SUPPORT * S390 * ZCRYPT - * S390_AP_IOMMU * VFIO * KVM diff --git a/Documentation/staging/crc32.rst b/Documentation/staging/crc32.rst index 8a6860f33b4e..7542220967cb 100644 --- a/Documentation/staging/crc32.rst +++ b/Documentation/staging/crc32.rst @@ -1,5 +1,5 @@ ================================= -brief tutorial on CRC computation +Brief tutorial on CRC computation ================================= A CRC is a long-division remainder. You add the CRC to the message, diff --git a/Documentation/timers/index.rst b/Documentation/timers/index.rst index df510ad0c989..983f91f8f023 100644 --- a/Documentation/timers/index.rst +++ b/Documentation/timers/index.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0 ====== -timers +Timers ====== .. toctree:: diff --git a/Documentation/trace/histogram.rst b/Documentation/trace/histogram.rst index 479c9eac6335..3c9b263de9c2 100644 --- a/Documentation/trace/histogram.rst +++ b/Documentation/trace/histogram.rst @@ -35,7 +35,7 @@ Documentation written by Tom Zanussi in place of an explicit value field - this is simply a count of event hits. If 'values' isn't specified, an implicit 'hitcount' value will be automatically created and used as the only value. - Keys can be any field, or the special string 'stacktrace', which + Keys can be any field, or the special string 'common_stacktrace', which will use the event's kernel stacktrace as the key. The keywords 'keys' or 'key' can be used to specify keys, and the keywords 'values', 'vals', or 'val' can be used to specify values. Compound @@ -54,7 +54,7 @@ Documentation written by Tom Zanussi 'compatible' if the fields named in the trigger share the same number and type of fields and those fields also have the same names. Note that any two events always share the compatible 'hitcount' and - 'stacktrace' fields and can therefore be combined using those + 'common_stacktrace' fields and can therefore be combined using those fields, however pointless that may be. 'hist' triggers add a 'hist' file to each event's subdirectory. @@ -547,9 +547,9 @@ Extended error information the hist trigger display symbolic call_sites, we can have the hist trigger additionally display the complete set of kernel stack traces that led to each call_site. To do that, we simply use the special - value 'stacktrace' for the key parameter:: + value 'common_stacktrace' for the key parameter:: - # echo 'hist:keys=stacktrace:values=bytes_req,bytes_alloc:sort=bytes_alloc' > \ + # echo 'hist:keys=common_stacktrace:values=bytes_req,bytes_alloc:sort=bytes_alloc' > \ /sys/kernel/tracing/events/kmem/kmalloc/trigger The above trigger will use the kernel stack trace in effect when an @@ -561,9 +561,9 @@ Extended error information every callpath to a kmalloc for a kernel compile):: # cat /sys/kernel/tracing/events/kmem/kmalloc/hist - # trigger info: hist:keys=stacktrace:vals=bytes_req,bytes_alloc:sort=bytes_alloc:size=2048 [active] + # trigger info: hist:keys=common_stacktrace:vals=bytes_req,bytes_alloc:sort=bytes_alloc:size=2048 [active] - { stacktrace: + { common_stacktrace: __kmalloc_track_caller+0x10b/0x1a0 kmemdup+0x20/0x50 hidraw_report_event+0x8a/0x120 [hid] @@ -581,7 +581,7 @@ Extended error information cpu_startup_entry+0x315/0x3e0 rest_init+0x7c/0x80 } hitcount: 3 bytes_req: 21 bytes_alloc: 24 - { stacktrace: + { common_stacktrace: __kmalloc_track_caller+0x10b/0x1a0 kmemdup+0x20/0x50 hidraw_report_event+0x8a/0x120 [hid] @@ -596,7 +596,7 @@ Extended error information do_IRQ+0x5a/0xf0 ret_from_intr+0x0/0x30 } hitcount: 3 bytes_req: 21 bytes_alloc: 24 - { stacktrace: + { common_stacktrace: kmem_cache_alloc_trace+0xeb/0x150 aa_alloc_task_context+0x27/0x40 apparmor_cred_prepare+0x1f/0x50 @@ -608,7 +608,7 @@ Extended error information . . . - { stacktrace: + { common_stacktrace: __kmalloc+0x11b/0x1b0 i915_gem_execbuffer2+0x6c/0x2c0 [i915] drm_ioctl+0x349/0x670 [drm] @@ -616,7 +616,7 @@ Extended error information SyS_ioctl+0x81/0xa0 system_call_fastpath+0x12/0x6a } hitcount: 17726 bytes_req: 13944120 bytes_alloc: 19593808 - { stacktrace: + { common_stacktrace: __kmalloc+0x11b/0x1b0 load_elf_phdrs+0x76/0xa0 load_elf_binary+0x102/0x1650 @@ -625,7 +625,7 @@ Extended error information SyS_execve+0x3a/0x50 return_from_execve+0x0/0x23 } hitcount: 33348 bytes_req: 17152128 bytes_alloc: 20226048 - { stacktrace: + { common_stacktrace: kmem_cache_alloc_trace+0xeb/0x150 apparmor_file_alloc_security+0x27/0x40 security_file_alloc+0x16/0x20 @@ -636,7 +636,7 @@ Extended error information SyS_open+0x1e/0x20 system_call_fastpath+0x12/0x6a } hitcount: 4766422 bytes_req: 9532844 bytes_alloc: 38131376 - { stacktrace: + { common_stacktrace: __kmalloc+0x11b/0x1b0 seq_buf_alloc+0x1b/0x50 seq_read+0x2cc/0x370 @@ -1026,7 +1026,7 @@ Extended error information First we set up an initially paused stacktrace trigger on the netif_receive_skb event:: - # echo 'hist:key=stacktrace:vals=len:pause' > \ + # echo 'hist:key=common_stacktrace:vals=len:pause' > \ /sys/kernel/tracing/events/net/netif_receive_skb/trigger Next, we set up an 'enable_hist' trigger on the sched_process_exec @@ -1060,9 +1060,9 @@ Extended error information $ wget https://www.kernel.org/pub/linux/kernel/v3.x/patch-3.19.xz # cat /sys/kernel/tracing/events/net/netif_receive_skb/hist - # trigger info: hist:keys=stacktrace:vals=len:sort=hitcount:size=2048 [paused] + # trigger info: hist:keys=common_stacktrace:vals=len:sort=hitcount:size=2048 [paused] - { stacktrace: + { common_stacktrace: __netif_receive_skb_core+0x46d/0x990 __netif_receive_skb+0x18/0x60 netif_receive_skb_internal+0x23/0x90 @@ -1079,7 +1079,7 @@ Extended error information kthread+0xd2/0xf0 ret_from_fork+0x42/0x70 } hitcount: 85 len: 28884 - { stacktrace: + { common_stacktrace: __netif_receive_skb_core+0x46d/0x990 __netif_receive_skb+0x18/0x60 netif_receive_skb_internal+0x23/0x90 @@ -1097,7 +1097,7 @@ Extended error information irq_thread+0x11f/0x150 kthread+0xd2/0xf0 } hitcount: 98 len: 664329 - { stacktrace: + { common_stacktrace: __netif_receive_skb_core+0x46d/0x990 __netif_receive_skb+0x18/0x60 process_backlog+0xa8/0x150 @@ -1115,7 +1115,7 @@ Extended error information inet_sendmsg+0x64/0xa0 sock_sendmsg+0x3d/0x50 } hitcount: 115 len: 13030 - { stacktrace: + { common_stacktrace: __netif_receive_skb_core+0x46d/0x990 __netif_receive_skb+0x18/0x60 netif_receive_skb_internal+0x23/0x90 @@ -1142,14 +1142,14 @@ Extended error information into the histogram. In order to avoid having to set everything up again, we can just clear the histogram first:: - # echo 'hist:key=stacktrace:vals=len:clear' >> \ + # echo 'hist:key=common_stacktrace:vals=len:clear' >> \ /sys/kernel/tracing/events/net/netif_receive_skb/trigger Just to verify that it is in fact cleared, here's what we now see in the hist file:: # cat /sys/kernel/tracing/events/net/netif_receive_skb/hist - # trigger info: hist:keys=stacktrace:vals=len:sort=hitcount:size=2048 [paused] + # trigger info: hist:keys=common_stacktrace:vals=len:sort=hitcount:size=2048 [paused] Totals: Hits: 0 @@ -1485,12 +1485,12 @@ Extended error information And here's an example that shows how to combine histogram data from any two events even if they don't share any 'compatible' fields - other than 'hitcount' and 'stacktrace'. These commands create a + other than 'hitcount' and 'common_stacktrace'. These commands create a couple of triggers named 'bar' using those fields:: - # echo 'hist:name=bar:key=stacktrace:val=hitcount' > \ + # echo 'hist:name=bar:key=common_stacktrace:val=hitcount' > \ /sys/kernel/tracing/events/sched/sched_process_fork/trigger - # echo 'hist:name=bar:key=stacktrace:val=hitcount' > \ + # echo 'hist:name=bar:key=common_stacktrace:val=hitcount' > \ /sys/kernel/tracing/events/net/netif_rx/trigger And displaying the output of either shows some interesting if @@ -1501,16 +1501,16 @@ Extended error information # event histogram # - # trigger info: hist:name=bar:keys=stacktrace:vals=hitcount:sort=hitcount:size=2048 [active] + # trigger info: hist:name=bar:keys=common_stacktrace:vals=hitcount:sort=hitcount:size=2048 [active] # - { stacktrace: + { common_stacktrace: kernel_clone+0x18e/0x330 kernel_thread+0x29/0x30 kthreadd+0x154/0x1b0 ret_from_fork+0x3f/0x70 } hitcount: 1 - { stacktrace: + { common_stacktrace: netif_rx_internal+0xb2/0xd0 netif_rx_ni+0x20/0x70 dev_loopback_xmit+0xaa/0xd0 @@ -1528,7 +1528,7 @@ Extended error information call_cpuidle+0x3b/0x60 cpu_startup_entry+0x22d/0x310 } hitcount: 1 - { stacktrace: + { common_stacktrace: netif_rx_internal+0xb2/0xd0 netif_rx_ni+0x20/0x70 dev_loopback_xmit+0xaa/0xd0 @@ -1543,7 +1543,7 @@ Extended error information SyS_sendto+0xe/0x10 entry_SYSCALL_64_fastpath+0x12/0x6a } hitcount: 2 - { stacktrace: + { common_stacktrace: netif_rx_internal+0xb2/0xd0 netif_rx+0x1c/0x60 loopback_xmit+0x6c/0xb0 @@ -1561,7 +1561,7 @@ Extended error information sock_sendmsg+0x38/0x50 ___sys_sendmsg+0x14e/0x270 } hitcount: 76 - { stacktrace: + { common_stacktrace: netif_rx_internal+0xb2/0xd0 netif_rx+0x1c/0x60 loopback_xmit+0x6c/0xb0 @@ -1579,7 +1579,7 @@ Extended error information sock_sendmsg+0x38/0x50 ___sys_sendmsg+0x269/0x270 } hitcount: 77 - { stacktrace: + { common_stacktrace: netif_rx_internal+0xb2/0xd0 netif_rx+0x1c/0x60 loopback_xmit+0x6c/0xb0 @@ -1597,7 +1597,7 @@ Extended error information sock_sendmsg+0x38/0x50 SYSC_sendto+0xef/0x170 } hitcount: 88 - { stacktrace: + { common_stacktrace: kernel_clone+0x18e/0x330 SyS_clone+0x19/0x20 entry_SYSCALL_64_fastpath+0x12/0x6a @@ -1949,7 +1949,7 @@ uninterruptible state:: # cd /sys/kernel/tracing # echo 's:block_lat pid_t pid; u64 delta; unsigned long[] stack;' > dynamic_events - # echo 'hist:keys=next_pid:ts=common_timestamp.usecs,st=stacktrace if prev_state == 2' >> events/sched/sched_switch/trigger + # echo 'hist:keys=next_pid:ts=common_timestamp.usecs,st=common_stacktrace if prev_state == 2' >> events/sched/sched_switch/trigger # echo 'hist:keys=prev_pid:delta=common_timestamp.usecs-$ts,s=$st:onmax($delta).trace(block_lat,prev_pid,$delta,$s)' >> events/sched/sched_switch/trigger # echo 1 > events/synthetic/block_lat/enable # cat trace diff --git a/Documentation/translations/zh_CN/devicetree/usage-model.rst b/Documentation/translations/zh_CN/devicetree/usage-model.rst index c6aee82c7e6e..19ba4ae0cd81 100644 --- a/Documentation/translations/zh_CN/devicetree/usage-model.rst +++ b/Documentation/translations/zh_CN/devicetree/usage-model.rst @@ -325,6 +325,6 @@ Primecell设备。然而，棘手的一点是，AMBA总线上的所有设备并 当使用DT时，这给of_platform_populate()带来了问题，因为它必须决定是否将 每个节点注册为platform_device或amba_device。不幸的是，这使设备创建模型 -变得有点复杂，但解决方案原来并不是太具有侵略性。如果一个节点与“arm,amba-primecell” +变得有点复杂，但解决方案原来并不是太具有侵略性。如果一个节点与“arm,primecell” 兼容，那么of_platform_populate()将把它注册为amba_device而不是 platform_device。 diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst index 176e8fc3f31b..4f7b23faebb9 100644 --- a/Documentation/userspace-api/ioctl/ioctl-number.rst +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst @@ -363,7 +363,7 @@ Code Seq# Include File Comments 0xCC 00-0F drivers/misc/ibmvmc.h pseries VMC driver 0xCD 01 linux/reiserfs_fs.h 0xCE 01-02 uapi/linux/cxl_mem.h Compute Express Link Memory Devices -0xCF 02 fs/cifs/ioctl.c +0xCF 02 fs/smb/client/cifs_ioctl.h 0xDB 00-0F drivers/char/mwave/mwavepub.h 0xDD 00-3F ZFCP device driver see drivers/s390/scsi/ <mailto:aherrman@de.ibm.com> |