summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-11-14 07:35:54 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2015-11-14 07:35:54 +0300
commitd83763f4a6adb2f417c3288ee903982985ae949c (patch)
tree610a7cfd32935ce4b555dc832c26ddeb13dcd003 /Documentation
parent9aa3d651a9199103eb6451aeb0ac1b66a6d770a6 (diff)
parent0a5149ba02bdf75281b8bc94cf6dfa94c527fa6f (diff)
downloadlinux-d83763f4a6adb2f417c3288ee903982985ae949c.tar.xz
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull final round of SCSI updates from James Bottomley: "Sorry for the delay in this patch which was mostly caused by getting the merger of the mpt2/mpt3sas driver, which was seen as an essential item of maintenance work to do before the drivers diverge too much. Unfortunately, this caused a compile failure (detected by linux-next), which then had to be fixed up and incubated. In addition to the mpt2/3sas rework, there are updates from pm80xx, lpfc, bnx2fc, hpsa, ipr, aacraid, megaraid_sas, storvsc and ufs plus an assortment of changes including some year 2038 issues, a fix for a remove before detach issue in some drivers and a couple of other minor issues" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits) mpt3sas: fix inline markers on non inline function declarations sd: Clear PS bit before Mode Select. ibmvscsi: set max_lun to 32 ibmvscsi: display default value for max_id, max_lun and max_channel. mptfusion: don't allow negative bytes in kbuf_alloc_2_sgl() scsi: pmcraid: replace struct timeval with ktime_get_real_seconds() mvumi: 64bit value for seconds_since1970 be2iscsi: Fix bogus WARN_ON length check scsi_scan: don't dump trace when scsi_prep_async_scan() is called twice mpt3sas: Bump mpt3sas driver version to 09.102.00.00 mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0 HBAs mpt2sas, mpt3sas: Update the driver versions mpt3sas: setpci reset kernel oops fix mpt3sas: Added OEM Gen2 PnP ID branding names mpt3sas: Refcount fw_events and fix unsafe list usage mpt3sas: Refcount sas_device objects and fix unsafe list usage mpt3sas: sysfs attribute to report Backup Rail Monitor Status mpt3sas: Ported WarpDrive product SSS6200 support mpt3sas: fix for driver fails EEH, recovery from injected pci bus error mpt3sas: Manage MSI-X vectors according to HBA device type ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/sysfs-driver-st12
-rw-r--r--Documentation/devicetree/bindings/ufs/ufs-qcom.txt58
-rw-r--r--Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt11
-rw-r--r--Documentation/scsi/st.txt4
4 files changed, 83 insertions, 2 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-st b/Documentation/ABI/testing/sysfs-driver-st
new file mode 100644
index 000000000000..ba5d77008a85
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-st
@@ -0,0 +1,12 @@
+What: /sys/bus/scsi/drivers/st/debug_flag
+Date: October 2015
+Kernel Version: ?.?
+Contact: shane.seymour@hpe.com
+Description:
+ This file allows you to turn debug output from the st driver
+ off if you write a '0' to the file or on if you write a '1'.
+ Note that debug output requires that the module be compiled
+ with the #define DEBUG set to a non-zero value (this is the
+ default). If DEBUG is set to 0 then this file will not
+ appear in sysfs as its presence is conditional upon debug
+ output support being compiled into the module.
diff --git a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
new file mode 100644
index 000000000000..070baf4d7d97
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
@@ -0,0 +1,58 @@
+* Qualcomm Technologies Inc Universal Flash Storage (UFS) PHY
+
+UFSPHY nodes are defined to describe on-chip UFS PHY hardware macro.
+Each UFS PHY node should have its own node.
+
+To bind UFS PHY with UFS host controller, the controller node should
+contain a phandle reference to UFS PHY node.
+
+Required properties:
+- compatible : compatible list, contains "qcom,ufs-phy-qmp-20nm"
+ or "qcom,ufs-phy-qmp-14nm" according to the relevant phy in use.
+- reg : should contain PHY register address space (mandatory),
+- reg-names : indicates various resources passed to driver (via reg proptery) by name.
+ Required "reg-names" is "phy_mem".
+- #phy-cells : This property shall be set to 0
+- vdda-phy-supply : phandle to main PHY supply for analog domain
+- vdda-pll-supply : phandle to PHY PLL and Power-Gen block power supply
+- clocks : List of phandle and clock specifier pairs
+- clock-names : List of clock input name strings sorted in the same
+ order as the clocks property. "ref_clk_src", "ref_clk",
+ "tx_iface_clk" & "rx_iface_clk" are mandatory but
+ "ref_clk_parent" is optional
+
+Optional properties:
+- vdda-phy-max-microamp : specifies max. load that can be drawn from phy supply
+- vdda-pll-max-microamp : specifies max. load that can be drawn from pll supply
+- vddp-ref-clk-supply : phandle to UFS device ref_clk pad power supply
+- vddp-ref-clk-max-microamp : specifies max. load that can be drawn from this supply
+- vddp-ref-clk-always-on : specifies if this supply needs to be kept always on
+
+Example:
+
+ ufsphy1: ufsphy@0xfc597000 {
+ compatible = "qcom,ufs-phy-qmp-20nm";
+ reg = <0xfc597000 0x800>;
+ reg-names = "phy_mem";
+ #phy-cells = <0>;
+ vdda-phy-supply = <&pma8084_l4>;
+ vdda-pll-supply = <&pma8084_l12>;
+ vdda-phy-max-microamp = <50000>;
+ vdda-pll-max-microamp = <1000>;
+ clock-names = "ref_clk_src",
+ "ref_clk_parent",
+ "ref_clk",
+ "tx_iface_clk",
+ "rx_iface_clk";
+ clocks = <&clock_rpm clk_ln_bb_clk>,
+ <&clock_gcc clk_pcie_1_phy_ldo >,
+ <&clock_gcc clk_ufs_phy_ldo>,
+ <&clock_gcc clk_gcc_ufs_tx_cfg_clk>,
+ <&clock_gcc clk_gcc_ufs_rx_cfg_clk>;
+ };
+
+ ufshc@0xfc598000 {
+ ...
+ phys = <&ufsphy1>;
+ phy-names = "ufsphy";
+ };
diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
index 53579197eca2..03c0e989e020 100644
--- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
+++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
@@ -4,11 +4,18 @@ UFSHC nodes are defined to describe on-chip UFS host controllers.
Each UFS controller instance should have its own node.
Required properties:
-- compatible : compatible list, contains "jedec,ufs-1.1"
+- compatible : must contain "jedec,ufs-1.1", may also list one or more
+ of the following:
+ "qcom,msm8994-ufshc"
+ "qcom,msm8996-ufshc"
+ "qcom,ufshc"
- interrupts : <interrupt mapping for UFS host controller IRQ>
- reg : <registers mapping>
Optional properties:
+- phys : phandle to UFS PHY node
+- phy-names : the string "ufsphy" when is found in a node, along
+ with "phys" attribute, provides phandle to UFS PHY node
- vdd-hba-supply : phandle to UFS host controller supply regulator node
- vcc-supply : phandle to VCC supply regulator node
- vccq-supply : phandle to VCCQ supply regulator node
@@ -54,4 +61,6 @@ Example:
clocks = <&core 0>, <&ref 0>, <&iface 0>;
clock-names = "core_clk", "ref_clk", "iface_clk";
freq-table-hz = <100000000 200000000>, <0 0>, <0 0>;
+ phys = <&ufsphy1>;
+ phy-names = "ufsphy";
};
diff --git a/Documentation/scsi/st.txt b/Documentation/scsi/st.txt
index f29fa550665a..b3211af63b79 100644
--- a/Documentation/scsi/st.txt
+++ b/Documentation/scsi/st.txt
@@ -569,7 +569,9 @@ Debugging code is now compiled in by default but debugging is turned off
with the kernel module parameter debug_flag defaulting to 0. Debugging
can still be switched on and off with an ioctl. To enable debug at
module load time add debug_flag=1 to the module load options, the
-debugging output is not voluminous.
+debugging output is not voluminous. Debugging can also be enabled
+and disabled by writing a '0' (disable) or '1' (enable) to the sysfs
+file /sys/bus/scsi/drivers/st/debug_flag.
If the tape seems to hang, I would be very interested to hear where
the driver is waiting. With the command 'ps -l' you can see the state