diff options
author | Mauro Carvalho Chehab <mchehab+samsung@kernel.org> | 2019-04-18 22:49:39 +0300 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab+samsung@kernel.org> | 2019-07-15 15:20:26 +0300 |
commit | e0ae154404c33477473244f286b1193364144289 (patch) | |
tree | 056377356c52f6f90b4cdc2f22f81b461d844c19 /Documentation | |
parent | 5c04dceaa152d9dd9fe94dec6594965069e19e9e (diff) | |
download | linux-e0ae154404c33477473244f286b1193364144289.tar.xz |
docs: rapidio: convert to ReST
Rename the rapidio documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/rapidio/index.rst | 15 | ||||
-rw-r--r-- | Documentation/rapidio/mport_cdev.rst (renamed from Documentation/rapidio/mport_cdev.txt) | 47 | ||||
-rw-r--r-- | Documentation/rapidio/rapidio.rst (renamed from Documentation/rapidio/rapidio.txt) | 39 | ||||
-rw-r--r-- | Documentation/rapidio/rio_cm.rst (renamed from Documentation/rapidio/rio_cm.txt) | 66 | ||||
-rw-r--r-- | Documentation/rapidio/sysfs.rst (renamed from Documentation/rapidio/sysfs.txt) | 4 | ||||
-rw-r--r-- | Documentation/rapidio/tsi721.rst (renamed from Documentation/rapidio/tsi721.txt) | 45 |
6 files changed, 140 insertions, 76 deletions
diff --git a/Documentation/rapidio/index.rst b/Documentation/rapidio/index.rst new file mode 100644 index 000000000000..ab7b5541b346 --- /dev/null +++ b/Documentation/rapidio/index.rst @@ -0,0 +1,15 @@ +:orphan: + +=========================== +The Linux RapidIO Subsystem +=========================== + +.. toctree:: + :maxdepth: 1 + + rapidio + sysfs + + tsi721 + mport_cdev + rio_cm diff --git a/Documentation/rapidio/mport_cdev.txt b/Documentation/rapidio/mport_cdev.rst index a53f786ee2e9..df77a7f7be7d 100644 --- a/Documentation/rapidio/mport_cdev.txt +++ b/Documentation/rapidio/mport_cdev.rst @@ -1,13 +1,9 @@ -RapidIO subsystem mport character device driver (rio_mport_cdev.c) ================================================================== - -Version History: ----------------- - 1.0.0 - Initial driver release. - +RapidIO subsystem mport character device driver (rio_mport_cdev.c) ================================================================== -I. Overview +1. Overview +=========== This device driver is the result of collaboration within the RapidIO.org Software Task Group (STG) between Texas Instruments, Freescale, @@ -29,40 +25,41 @@ Using available set of ioctl commands user-space applications can perform following RapidIO bus and subsystem operations: - Reads and writes from/to configuration registers of mport devices - (RIO_MPORT_MAINT_READ_LOCAL/RIO_MPORT_MAINT_WRITE_LOCAL) + (RIO_MPORT_MAINT_READ_LOCAL/RIO_MPORT_MAINT_WRITE_LOCAL) - Reads and writes from/to configuration registers of remote RapidIO devices. This operations are defined as RapidIO Maintenance reads/writes in RIO spec. - (RIO_MPORT_MAINT_READ_REMOTE/RIO_MPORT_MAINT_WRITE_REMOTE) + (RIO_MPORT_MAINT_READ_REMOTE/RIO_MPORT_MAINT_WRITE_REMOTE) - Set RapidIO Destination ID for mport devices (RIO_MPORT_MAINT_HDID_SET) - Set RapidIO Component Tag for mport devices (RIO_MPORT_MAINT_COMPTAG_SET) - Query logical index of mport devices (RIO_MPORT_MAINT_PORT_IDX_GET) - Query capabilities and RapidIO link configuration of mport devices - (RIO_MPORT_GET_PROPERTIES) + (RIO_MPORT_GET_PROPERTIES) - Enable/Disable reporting of RapidIO doorbell events to user-space applications - (RIO_ENABLE_DOORBELL_RANGE/RIO_DISABLE_DOORBELL_RANGE) + (RIO_ENABLE_DOORBELL_RANGE/RIO_DISABLE_DOORBELL_RANGE) - Enable/Disable reporting of RIO port-write events to user-space applications - (RIO_ENABLE_PORTWRITE_RANGE/RIO_DISABLE_PORTWRITE_RANGE) + (RIO_ENABLE_PORTWRITE_RANGE/RIO_DISABLE_PORTWRITE_RANGE) - Query/Control type of events reported through this driver: doorbells, port-writes or both (RIO_SET_EVENT_MASK/RIO_GET_EVENT_MASK) - Configure/Map mport's outbound requests window(s) for specific size, RapidIO destination ID, hopcount and request type - (RIO_MAP_OUTBOUND/RIO_UNMAP_OUTBOUND) + (RIO_MAP_OUTBOUND/RIO_UNMAP_OUTBOUND) - Configure/Map mport's inbound requests window(s) for specific size, RapidIO base address and local memory base address - (RIO_MAP_INBOUND/RIO_UNMAP_INBOUND) + (RIO_MAP_INBOUND/RIO_UNMAP_INBOUND) - Allocate/Free contiguous DMA coherent memory buffer for DMA data transfers to/from remote RapidIO devices (RIO_ALLOC_DMA/RIO_FREE_DMA) - Initiate DMA data transfers to/from remote RapidIO devices (RIO_TRANSFER). Supports blocking, asynchronous and posted (a.k.a 'fire-and-forget') data transfer modes. - Check/Wait for completion of asynchronous DMA data transfer - (RIO_WAIT_FOR_ASYNC) + (RIO_WAIT_FOR_ASYNC) - Manage device objects supported by RapidIO subsystem (RIO_DEV_ADD/RIO_DEV_DEL). This allows implementation of various RapidIO fabric enumeration algorithms as user-space applications while using remaining functionality provided by kernel RapidIO subsystem. -II. Hardware Compatibility +2. Hardware Compatibility +========================= This device driver uses standard interfaces defined by kernel RapidIO subsystem and therefore it can be used with any mport device driver registered by RapidIO @@ -78,29 +75,35 @@ functionality of their platform when planning to use this driver: specific DMA engine support and therefore DMA data transfers mport_cdev driver are not available. -III. Module parameters +3. Module parameters +==================== -- 'dma_timeout' - DMA transfer completion timeout (in msec, default value 3000). +- 'dma_timeout' + - DMA transfer completion timeout (in msec, default value 3000). This parameter set a maximum completion wait time for SYNC mode DMA transfer requests and for RIO_WAIT_FOR_ASYNC ioctl requests. -- 'dbg_level' - This parameter allows to control amount of debug information +- 'dbg_level' + - This parameter allows to control amount of debug information generated by this device driver. This parameter is formed by set of bit masks that correspond to the specific functional blocks. For mask definitions see 'drivers/rapidio/devices/rio_mport_cdev.c' This parameter can be changed dynamically. Use CONFIG_RAPIDIO_DEBUG=y to enable debug output at the top level. -IV. Known problems +4. Known problems +================= None. -V. User-space Applications and API +5. User-space Applications and API +================================== API library and applications that use this device driver are available from RapidIO.org. -VI. TODO List +6. TODO List +============ - Add support for sending/receiving "raw" RapidIO messaging packets. - Add memory mapped DMA data transfers as an option when RapidIO-specific DMA diff --git a/Documentation/rapidio/rapidio.txt b/Documentation/rapidio/rapidio.rst index 28fbd877f85a..fb8942d3ba85 100644 --- a/Documentation/rapidio/rapidio.txt +++ b/Documentation/rapidio/rapidio.rst @@ -1,6 +1,6 @@ - The Linux RapidIO Subsystem - -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +============ +Introduction +============ The RapidIO standard is a packet-based fabric interconnect standard designed for use in embedded systems. Development of the RapidIO standard is directed by the @@ -11,7 +11,7 @@ This document describes the basics of the Linux RapidIO subsystem and provides information on its major components. 1 Overview ----------- +========== Because the RapidIO subsystem follows the Linux device model it is integrated into the kernel similarly to other buses by defining RapidIO-specific device and @@ -22,7 +22,7 @@ architecture-specific interfaces that provide support for common RapidIO subsystem operations. 2. Core Components ------------------- +================== A typical RapidIO network is a combination of endpoints and switches. Each of these components is represented in the subsystem by an associated data @@ -30,6 +30,7 @@ structure. The core logical components of the RapidIO subsystem are defined in include/linux/rio.h file. 2.1 Master Port +--------------- A master port (or mport) is a RapidIO interface controller that is local to the processor executing the Linux code. A master port generates and receives RapidIO @@ -46,6 +47,7 @@ includes rio_ops data structure which contains pointers to hardware specific implementations of RapidIO functions. 2.2 Device +---------- A RapidIO device is any endpoint (other than mport) or switch in the network. All devices are presented in the RapidIO subsystem by corresponding rio_dev data @@ -53,6 +55,7 @@ structure. Devices form one global device list and per-network device lists (depending on number of available mports and networks). 2.3 Switch +---------- A RapidIO switch is a special class of device that routes packets between its ports towards their final destination. The packet destination port within a @@ -66,6 +69,7 @@ specific switch drivers that are designed to provide hardware-specific implementation of common switch management routines. 2.4 Network +----------- A RapidIO network is a combination of interconnected endpoint and switch devices. Each RapidIO network known to the system is represented by corresponding rio_net @@ -74,11 +78,13 @@ ports that form the same network. It also contains a pointer to the default master port that is used to communicate with devices within the network. 2.5 Device Drivers +------------------ RapidIO device-specific drivers follow Linux Kernel Driver Model and are intended to support specific RapidIO devices attached to the RapidIO network. 2.6 Subsystem Interfaces +------------------------ RapidIO interconnect specification defines features that may be used to provide one or more common service layers for all participating RapidIO devices. These @@ -90,7 +96,7 @@ subsystem interfaces. This allows to have multiple common services attached to the same device without blocking attachment of a device-specific driver. 3. Subsystem Initialization ---------------------------- +=========================== In order to initialize the RapidIO subsystem, a platform must initialize and register at least one master port within the RapidIO network. To register mport @@ -105,7 +111,7 @@ RapidIO subsystem can be configured to be built as a statically linked or modular component of the kernel (see details below). 4. Enumeration and Discovery ----------------------------- +============================ 4.1 Overview ------------ @@ -168,14 +174,16 @@ on RapidIO subsystem build configuration: (b) If the RapidIO subsystem core is built as a loadable module, in addition to the method shown above, the host destination ID(s) can be specified using traditional methods of passing module parameter "hdid=" during its loading: + - from command line: "modprobe rapidio hdid=-1,7", or - from modprobe configuration file using configuration command "options", like in this example: "options rapidio hdid=-1,7". An example of modprobe configuration file is provided in the section below. - NOTES: +NOTES: (i) if "hdid=" parameter is omitted all available mport will be assigned destination ID = -1; + (ii) the "hdid=" parameter in systems with multiple mports can have destination ID assignments omitted from the end of list (default = -1). @@ -317,8 +325,7 @@ must ensure that they are loaded before the enumeration/discovery starts. This process can be automated by specifying pre- or post- dependencies in the RapidIO-specific modprobe configuration file as shown in the example below. - File /etc/modprobe.d/rapidio.conf: - ---------------------------------- +File /etc/modprobe.d/rapidio.conf:: # Configure RapidIO subsystem modules @@ -335,17 +342,21 @@ RapidIO-specific modprobe configuration file as shown in the example below. -------------------------- -NOTE: In the example above, one of "softdep" commands must be removed or -commented out to keep required module loading sequence. +NOTE: + In the example above, one of "softdep" commands must be removed or + commented out to keep required module loading sequence. -A. References -------------- +5. References +============= [1] RapidIO Trade Association. RapidIO Interconnect Specifications. http://www.rapidio.org. + [2] Rapidio TA. Technology Comparisons. http://www.rapidio.org/education/technology_comparisons/ + [3] RapidIO support for Linux. http://lwn.net/Articles/139118/ + [4] Matt Porter. RapidIO for Linux. Ottawa Linux Symposium, 2005 http://www.kernel.org/doc/ols/2005/ols2005v2-pages-43-56.pdf diff --git a/Documentation/rapidio/rio_cm.txt b/Documentation/rapidio/rio_cm.rst index 27aa401f1126..5294430a7a74 100644 --- a/Documentation/rapidio/rio_cm.txt +++ b/Documentation/rapidio/rio_cm.rst @@ -1,13 +1,10 @@ +========================================================================== RapidIO subsystem Channelized Messaging character device driver (rio_cm.c) ========================================================================== -Version History: ----------------- - 1.0.0 - Initial driver release. - -========================================================================== -I. Overview +1. Overview +=========== This device driver is the result of collaboration within the RapidIO.org Software Task Group (STG) between Texas Instruments, Prodrive Technologies, @@ -41,79 +38,98 @@ in /dev directory common for all registered RapidIO mport devices. Following ioctl commands are available to user-space applications: -- RIO_CM_MPORT_GET_LIST : Returns to caller list of local mport devices that +- RIO_CM_MPORT_GET_LIST: + Returns to caller list of local mport devices that support messaging operations (number of entries up to RIO_MAX_MPORTS). Each list entry is combination of mport's index in the system and RapidIO destination ID assigned to the port. -- RIO_CM_EP_GET_LIST_SIZE : Returns number of messaging capable remote endpoints +- RIO_CM_EP_GET_LIST_SIZE: + Returns number of messaging capable remote endpoints in a RapidIO network associated with the specified mport device. -- RIO_CM_EP_GET_LIST : Returns list of RapidIO destination IDs for messaging +- RIO_CM_EP_GET_LIST: + Returns list of RapidIO destination IDs for messaging capable remote endpoints (peers) available in a RapidIO network associated with the specified mport device. -- RIO_CM_CHAN_CREATE : Creates RapidIO message exchange channel data structure +- RIO_CM_CHAN_CREATE: + Creates RapidIO message exchange channel data structure with channel ID assigned automatically or as requested by a caller. -- RIO_CM_CHAN_BIND : Binds the specified channel data structure to the specified +- RIO_CM_CHAN_BIND: + Binds the specified channel data structure to the specified mport device. -- RIO_CM_CHAN_LISTEN : Enables listening for connection requests on the specified +- RIO_CM_CHAN_LISTEN: + Enables listening for connection requests on the specified channel. -- RIO_CM_CHAN_ACCEPT : Accepts a connection request from peer on the specified +- RIO_CM_CHAN_ACCEPT: + Accepts a connection request from peer on the specified channel. If wait timeout for this request is specified by a caller it is a blocking call. If timeout set to 0 this is non-blocking call - ioctl handler checks for a pending connection request and if one is not available exits with -EGAIN error status immediately. -- RIO_CM_CHAN_CONNECT : Sends a connection request to a remote peer/channel. -- RIO_CM_CHAN_SEND : Sends a data message through the specified channel. +- RIO_CM_CHAN_CONNECT: + Sends a connection request to a remote peer/channel. +- RIO_CM_CHAN_SEND: + Sends a data message through the specified channel. The handler for this request assumes that message buffer specified by a caller includes the reserved space for a packet header required by this driver. -- RIO_CM_CHAN_RECEIVE : Receives a data message through a connected channel. +- RIO_CM_CHAN_RECEIVE: + Receives a data message through a connected channel. If the channel does not have an incoming message ready to return this ioctl handler will wait for new message until timeout specified by a caller expires. If timeout value is set to 0, ioctl handler uses a default value defined by MAX_SCHEDULE_TIMEOUT. -- RIO_CM_CHAN_CLOSE : Closes a specified channel and frees associated buffers. +- RIO_CM_CHAN_CLOSE: + Closes a specified channel and frees associated buffers. If the specified channel is in the CONNECTED state, sends close notification to the remote peer. The ioctl command codes and corresponding data structures intended for use by user-space applications are defined in 'include/uapi/linux/rio_cm_cdev.h'. -II. Hardware Compatibility +2. Hardware Compatibility +========================= This device driver uses standard interfaces defined by kernel RapidIO subsystem and therefore it can be used with any mport device driver registered by RapidIO subsystem with limitations set by available mport HW implementation of messaging mailboxes. -III. Module parameters +3. Module parameters +==================== -- 'dbg_level' - This parameter allows to control amount of debug information +- 'dbg_level' + - This parameter allows to control amount of debug information generated by this device driver. This parameter is formed by set of bit masks that correspond to the specific functional block. For mask definitions see 'drivers/rapidio/devices/rio_cm.c' This parameter can be changed dynamically. Use CONFIG_RAPIDIO_DEBUG=y to enable debug output at the top level. -- 'cmbox' - Number of RapidIO mailbox to use (default value is 1). +- 'cmbox' + - Number of RapidIO mailbox to use (default value is 1). This parameter allows to set messaging mailbox number that will be used within entire RapidIO network. It can be used when default mailbox is used by other device drivers or is not supported by some nodes in the RapidIO network. -- 'chstart' - Start channel number for dynamic assignment. Default value - 256. +- 'chstart' + - Start channel number for dynamic assignment. Default value - 256. Allows to exclude channel numbers below this parameter from dynamic allocation to avoid conflicts with software components that use reserved predefined channel numbers. -IV. Known problems +4. Known problems +================= None. -V. User-space Applications and API Library +5. User-space Applications and API Library +========================================== Messaging API library and applications that use this device driver are available from RapidIO.org. -VI. TODO List +6. TODO List +============ - Add support for system notification messages (reserved channel 0). diff --git a/Documentation/rapidio/sysfs.txt b/Documentation/rapidio/sysfs.rst index a1adac888e6e..540f72683496 100644 --- a/Documentation/rapidio/sysfs.txt +++ b/Documentation/rapidio/sysfs.rst @@ -1,3 +1,7 @@ +============= +Sysfs entries +============= + The RapidIO sysfs files have moved to: Documentation/ABI/testing/sysfs-bus-rapidio and Documentation/ABI/testing/sysfs-class-rapidio diff --git a/Documentation/rapidio/tsi721.txt b/Documentation/rapidio/tsi721.rst index cd2a2935d51d..42aea438cd20 100644 --- a/Documentation/rapidio/tsi721.txt +++ b/Documentation/rapidio/tsi721.rst @@ -1,7 +1,9 @@ +========================================================================= RapidIO subsystem mport driver for IDT Tsi721 PCI Express-to-SRIO bridge. ========================================================================= -I. Overview +1. Overview +=========== This driver implements all currently defined RapidIO mport callback functions. It supports maintenance read and write operations, inbound and outbound RapidIO @@ -17,7 +19,9 @@ into the corresponding message queue. Messaging callbacks are implemented to be fully compatible with RIONET driver (Ethernet over RapidIO messaging services). 1. Module parameters: -- 'dbg_level' - This parameter allows to control amount of debug information + +- 'dbg_level' + - This parameter allows to control amount of debug information generated by this device driver. This parameter is formed by set of This parameter can be changed bit masks that correspond to the specific functional block. @@ -25,37 +29,44 @@ fully compatible with RIONET driver (Ethernet over RapidIO messaging services). This parameter can be changed dynamically. Use CONFIG_RAPIDIO_DEBUG=y to enable debug output at the top level. -- 'dma_desc_per_channel' - This parameter defines number of hardware buffer +- 'dma_desc_per_channel' + - This parameter defines number of hardware buffer descriptors allocated for each registered Tsi721 DMA channel. Its default value is 128. -- 'dma_txqueue_sz' - DMA transactions queue size. Defines number of pending +- 'dma_txqueue_sz' + - DMA transactions queue size. Defines number of pending transaction requests that can be accepted by each DMA channel. Default value is 16. -- 'dma_sel' - DMA channel selection mask. Bitmask that defines which hardware +- 'dma_sel' + - DMA channel selection mask. Bitmask that defines which hardware DMA channels (0 ... 6) will be registered with DmaEngine core. If bit is set to 1, the corresponding DMA channel will be registered. DMA channels not selected by this mask will not be used by this device driver. Default value is 0x7f (use all channels). -- 'pcie_mrrs' - override value for PCIe Maximum Read Request Size (MRRS). +- 'pcie_mrrs' + - override value for PCIe Maximum Read Request Size (MRRS). This parameter gives an ability to override MRRS value set during PCIe configuration process. Tsi721 supports read request sizes up to 4096B. Value for this parameter must be set as defined by PCIe specification: 0 = 128B, 1 = 256B, 2 = 512B, 3 = 1024B, 4 = 2048B and 5 = 4096B. Default value is '-1' (= keep platform setting). -- 'mbox_sel' - RIO messaging MBOX selection mask. This is a bitmask that defines +- 'mbox_sel' + - RIO messaging MBOX selection mask. This is a bitmask that defines messaging MBOXes are managed by this device driver. Mask bits 0 - 3 correspond to MBOX0 - MBOX3. MBOX is under driver's control if the corresponding bit is set to '1'. Default value is 0x0f (= all). -II. Known problems +2. Known problems +================= None. -III. DMA Engine Support +3. DMA Engine Support +===================== Tsi721 mport driver supports DMA data transfers between local system memory and remote RapidIO devices. This functionality is implemented according to SLAVE @@ -68,17 +79,21 @@ One BDMA channel is reserved for generation of maintenance read/write requests. If Tsi721 mport driver have been built with RAPIDIO_DMA_ENGINE support included, this driver will accept DMA-specific module parameter: - "dma_desc_per_channel" - defines number of hardware buffer descriptors used by + + "dma_desc_per_channel" + - defines number of hardware buffer descriptors used by each BDMA channel of Tsi721 (by default - 128). -IV. Version History +4. Version History - 1.1.0 - DMA operations re-worked to support data scatter/gather lists larger + ===== ==================================================================== + 1.1.0 DMA operations re-worked to support data scatter/gather lists larger than hardware buffer descriptors ring. - 1.0.0 - Initial driver release. + 1.0.0 Initial driver release. + ===== ==================================================================== -V. License ------------------------------------------------ +5. License +=========== Copyright(c) 2011 Integrated Device Technology, Inc. All rights reserved. |