summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-02-15 21:24:55 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2015-02-15 21:24:55 +0300
commite29876723f7cb7728f0d6a674d23f92673e9f112 (patch)
treeea1da8bf77139f6cc6de029988208a7eddaf2002 /Documentation
parent8c988ae787af4900bec5410658e8a82844185c85 (diff)
parent4d4bac4499e9955521af80198063ef9c2f2bd634 (diff)
downloadlinux-e29876723f7cb7728f0d6a674d23f92673e9f112.tar.xz
Merge tag 'usb-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB patches from Greg KH: "Here's the big pull request for the USB driver tree for 3.20-rc1. Nothing major happening here, just lots of gadget driver updates, new device ids, and a bunch of cleanups. All of these have been in linux-next for a while with no reported issues" * tag 'usb-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (299 commits) usb: musb: fix device hotplug behind hub usb: dwc2: Fix a bug in reading the endpoint directions from reg. staging: emxx_udc: fix the build error usb: Retry port status check on resume to work around RH bugs Revert "usb: Reset USB-3 devices on USB-3 link bounce" uhci-hub: use HUB_CHAR_* usb: kconfig: replace PPC_OF with PPC ehci-pci: disable for Intel MID platforms (update) usb: gadget: Kconfig: use bool instead of boolean usb: musb: blackfin: remove incorrect __exit_p() USB: fix use-after-free bug in usb_hcd_unlink_urb() ehci-pci: disable for Intel MID platforms usb: host: pci_quirks: joing string literals USB: add flag for HCDs that can't receive wakeup requests (isp1760-hcd) USB: usbfs: allow URBs to be reaped after disconnection cdc-acm: kill unnecessary messages cdc-acm: add sanity checks usb: phy: phy-generic: Fix USB PHY gpio reset usb: dwc2: fix USB core dependencies usb: renesas_usbhs: fix NULL pointer dereference in dma_release_channel() ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/configfs-usb-gadget-uvc265
-rw-r--r--Documentation/devicetree/bindings/phy/phy-miphy28lp.txt43
-rw-r--r--Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt37
-rw-r--r--Documentation/devicetree/bindings/phy/samsung-phy.txt2
-rw-r--r--Documentation/devicetree/bindings/usb/atmel-usb.txt5
-rw-r--r--Documentation/devicetree/bindings/usb/dwc2.txt4
-rw-r--r--Documentation/devicetree/bindings/usb/renesas_usbhs.txt2
-rw-r--r--Documentation/devicetree/bindings/usb/usb-ehci.txt1
-rw-r--r--Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt10
-rw-r--r--Documentation/usb/gadget-testing.txt728
-rw-r--r--Documentation/usb/gadget_serial.txt8
-rw-r--r--Documentation/usb/usbmon.txt2
12 files changed, 1074 insertions, 33 deletions
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uvc b/Documentation/ABI/testing/configfs-usb-gadget-uvc
new file mode 100644
index 000000000000..2f4a0051b32d
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-uvc
@@ -0,0 +1,265 @@
+What: /config/usb-gadget/gadget/functions/uvc.name
+Date: Dec 2014
+KernelVersion: 3.20
+Description: UVC function directory
+
+ streaming_maxburst - 0..15 (ss only)
+ streaming_maxpacket - 1..1023 (fs), 1..3072 (hs/ss)
+ streaming_interval - 1..16
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Control descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/class
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Class descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/class/ss
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Super speed control class descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/class/fs
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Full speed control class descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Terminal descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal/output
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Output terminal descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal/output/default
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Default output terminal descriptors
+
+ All attributes read only:
+ iTerminal - index of string descriptor
+ bSourceID - id of the terminal to which this terminal
+ is connected
+ bAssocTerminal - id of the input terminal to which this output
+ terminal is associated
+ wTerminalType - terminal type
+ bTerminalID - a non-zero id of this terminal
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal/camera
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Camera terminal descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal/camera/default
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Default camera terminal descriptors
+
+ All attributes read only:
+ bmControls - bitmap specifying which controls are
+ supported for the video stream
+ wOcularFocalLength - the value of Locular
+ wObjectiveFocalLengthMax- the value of Lmin
+ wObjectiveFocalLengthMin- the value of Lmax
+ iTerminal - index of string descriptor
+ bAssocTerminal - id of the output terminal to which
+ this terminal is connected
+ wTerminalType - terminal type
+ bTerminalID - a non-zero id of this terminal
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/processing
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Processing unit descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/processing/default
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Default processing unit descriptors
+
+ All attributes read only:
+ iProcessing - index of string descriptor
+ bmControls - bitmap specifying which controls are
+ supported for the video stream
+ wMaxMultiplier - maximum digital magnification x100
+ bSourceID - id of the terminal to which this unit is
+ connected
+ bUnitID - a non-zero id of this unit
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/header
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Control header descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/control/header/name
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Specific control header descriptors
+
+dwClockFrequency
+bcdUVC
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Streaming descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/class
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Streaming class descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/class/ss
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Super speed streaming class descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/class/hs
+Date: Dec 2014
+KernelVersion: 3.20
+Description: High speed streaming class descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/class/fs
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Full speed streaming class descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/color_matching
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Color matching descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/color_matching/default
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Default color matching descriptors
+
+ All attributes read only:
+ bMatrixCoefficients - matrix used to compute luma and
+ chroma values from the color primaries
+ bTransferCharacteristics- optoelectronic transfer
+ characteristic of the source picutre,
+ also called the gamma function
+ bColorPrimaries - color primaries and the reference
+ white
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg
+Date: Dec 2014
+KernelVersion: 3.20
+Description: MJPEG format descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg/name
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Specific MJPEG format descriptors
+
+ All attributes read only,
+ except bmaControls and bDefaultFrameIndex:
+ bmaControls - this format's data for bmaControls in
+ the streaming header
+ bmInterfaceFlags - specifies interlace information,
+ read-only
+ bAspectRatioY - the X dimension of the picture aspect
+ ratio, read-only
+ bAspectRatioX - the Y dimension of the picture aspect
+ ratio, read-only
+ bmFlags - characteristics of this format,
+ read-only
+ bDefaultFrameIndex - optimum frame index for this stream
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg/name/name
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Specific MJPEG frame descriptors
+
+ dwFrameInterval - indicates how frame interval can be
+ programmed; a number of values
+ separated by newline can be specified
+ dwDefaultFrameInterval - the frame interval the device would
+ like to use as default
+ dwMaxVideoFrameBufferSize- the maximum number of bytes the
+ compressor will produce for a video
+ frame or still image
+ dwMaxBitRate - the maximum bit rate at the shortest
+ frame interval in bps
+ dwMinBitRate - the minimum bit rate at the longest
+ frame interval in bps
+ wHeight - height of decoded bitmap frame in px
+ wWidth - width of decoded bitmam frame in px
+ bmCapabilities - still image support, fixed frame-rate
+ support
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Uncompressed format descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed/name
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Specific uncompressed format descriptors
+
+ bmaControls - this format's data for bmaControls in
+ the streaming header
+ bmInterfaceFlags - specifies interlace information,
+ read-only
+ bAspectRatioY - the X dimension of the picture aspect
+ ratio, read-only
+ bAspectRatioX - the Y dimension of the picture aspect
+ ratio, read-only
+ bDefaultFrameIndex - optimum frame index for this stream
+ bBitsPerPixel - number of bits per pixel used to
+ specify color in the decoded video
+ frame
+ guidFormat - globally unique id used to identify
+ stream-encoding format
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed/name/name
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Specific uncompressed frame descriptors
+
+ dwFrameInterval - indicates how frame interval can be
+ programmed; a number of values
+ separated by newline can be specified
+ dwDefaultFrameInterval - the frame interval the device would
+ like to use as default
+ dwMaxVideoFrameBufferSize- the maximum number of bytes the
+ compressor will produce for a video
+ frame or still image
+ dwMaxBitRate - the maximum bit rate at the shortest
+ frame interval in bps
+ dwMinBitRate - the minimum bit rate at the longest
+ frame interval in bps
+ wHeight - height of decoded bitmap frame in px
+ wWidth - width of decoded bitmam frame in px
+ bmCapabilities - still image support, fixed frame-rate
+ support
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/header
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Streaming header descriptors
+
+What: /config/usb-gadget/gadget/functions/uvc.name/streaming/header/name
+Date: Dec 2014
+KernelVersion: 3.20
+Description: Specific streaming header descriptors
+
+ All attributes read only:
+ bTriggerUsage - how the host software will respond to
+ a hardware trigger interrupt event
+ bTriggerSupport - flag specifying if hardware
+ triggering is supported
+ bStillCaptureMethod - method of still image caputre
+ supported
+ bTerminalLink - id of the output terminal to which
+ the video endpoint of this interface
+ is connected
+ bmInfo - capabilities of this video streaming
+ interface
diff --git a/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt b/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
index 46a135dae6b3..89caa885d08c 100644
--- a/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
+++ b/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
@@ -26,6 +26,7 @@ Required properties (port (child) node):
filled in "reg". It can also contain the offset of the system configuration
registers used as glue-logic to setup the device for SATA/PCIe or USB3
devices.
+- st,syscfg : Offset of the parent configuration register.
- resets : phandle to the parent reset controller.
- reset-names : Associated name must be "miphy-sw-rst".
@@ -54,18 +55,12 @@ example:
phy_port0: port@9b22000 {
reg = <0x9b22000 0xff>,
<0x9b09000 0xff>,
- <0x9b04000 0xff>,
- <0x114 0x4>, /* sysctrl MiPHY cntrl */
- <0x818 0x4>, /* sysctrl MiPHY status*/
- <0xe0 0x4>, /* sysctrl PCIe */
- <0xec 0x4>; /* sysctrl SATA */
+ <0x9b04000 0xff>;
reg-names = "sata-up",
"pcie-up",
- "pipew",
- "miphy-ctrl-glue",
- "miphy-status-glue",
- "pcie-glue",
- "sata-glue";
+ "pipew";
+
+ st,syscfg = <0x114 0x818 0xe0 0xec>;
#phy-cells = <1>;
st,osc-rdy;
reset-names = "miphy-sw-rst";
@@ -75,18 +70,13 @@ example:
phy_port1: port@9b2a000 {
reg = <0x9b2a000 0xff>,
<0x9b19000 0xff>,
- <0x9b14000 0xff>,
- <0x118 0x4>,
- <0x81c 0x4>,
- <0xe4 0x4>,
- <0xf0 0x4>;
+ <0x9b14000 0xff>;
reg-names = "sata-up",
"pcie-up",
- "pipew",
- "miphy-ctrl-glue",
- "miphy-status-glue",
- "pcie-glue",
- "sata-glue";
+ "pipew";
+
+ st,syscfg = <0x118 0x81c 0xe4 0xf0>;
+
#phy-cells = <1>;
st,osc-force-ext;
reset-names = "miphy-sw-rst";
@@ -95,13 +85,12 @@ example:
phy_port2: port@8f95000 {
reg = <0x8f95000 0xff>,
- <0x8f90000 0xff>,
- <0x11c 0x4>,
- <0x820 0x4>;
+ <0x8f90000 0xff>;
reg-names = "pipew",
- "usb3-up",
- "miphy-ctrl-glue",
- "miphy-status-glue";
+ "usb3-up";
+
+ st,syscfg = <0x11c 0x820>;
+
#phy-cells = <1>;
reset-names = "miphy-sw-rst";
resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
@@ -125,4 +114,4 @@ example:
Macro definitions for the supported miphy configuration can be found in:
-include/dt-bindings/phy/phy-miphy28lp.h
+include/dt-bindings/phy/phy.h
diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
new file mode 100644
index 000000000000..826454ac43bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
@@ -0,0 +1,37 @@
+ROCKCHIP USB2 PHY
+
+Required properties:
+ - compatible: rockchip,rk3288-usb-phy
+ - rockchip,grf : phandle to the syscon managing the "general
+ register files"
+ - #address-cells: should be 1
+ - #size-cells: should be 0
+
+Sub-nodes:
+Each PHY should be represented as a sub-node.
+
+Sub-nodes
+required properties:
+- #phy-cells: should be 0
+- reg: PHY configure reg address offset in GRF
+ "0x320" - for PHY attach to OTG controller
+ "0x334" - for PHY attach to HOST0 controller
+ "0x348" - for PHY attach to HOST1 controller
+
+Optional Properties:
+- clocks : phandle + clock specifier for the phy clocks
+- clock-names: string, clock name, must be "phyclk"
+
+Example:
+
+usbphy: phy {
+ compatible = "rockchip,rk3288-usb-phy";
+ rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbphy0: usb-phy0 {
+ #phy-cells = <0>;
+ reg = <0x320>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
index d5bad920827f..91e38cfe1f8f 100644
--- a/Documentation/devicetree/bindings/phy/samsung-phy.txt
+++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
@@ -3,8 +3,8 @@ Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY
Required properties:
- compatible : should be "samsung,s5pv210-mipi-video-phy";
-- reg : offset and length of the MIPI DPHY register set;
- #phy-cells : from the generic phy bindings, must be 1;
+- syscon - phandle to the PMU system controller;
For "samsung,s5pv210-mipi-video-phy" compatible PHYs the second cell in
the PHY specifier identifies the PHY and its meaning is as follows:
diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
index bc2222ca3f2a..38fee0f66c12 100644
--- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -51,7 +51,10 @@ usb1: gadget@fffa4000 {
Atmel High-Speed USB device controller
Required properties:
- - compatible: Should be "atmel,at91sam9rl-udc"
+ - compatible: Should be one of the following
+ "at91sam9rl-udc"
+ "at91sam9g45-udc"
+ "sama5d3-udc"
- reg: Address and length of the register set for the device
- interrupts: Should contain usba interrupt
- ep childnode: To specify the number of endpoints and their properties.
diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index 482f815363ef..fd132cbee70e 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -20,6 +20,10 @@ Optional properties:
Refer to phy/phy-bindings.txt for generic phy consumer properties
- dr_mode: shall be one of "host", "peripheral" and "otg"
Refer to usb/generic.txt
+- g-use-dma: enable dma usage in gadget driver.
+- g-rx-fifo-size: size of rx fifo size in gadget mode.
+- g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
+- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
Example:
diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
index b08c903f8668..61b045b6d50e 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
@@ -14,6 +14,8 @@ Optional properties:
function should be enabled
- phys: phandle + phy specifier pair
- phy-names: must be "usb"
+ - dmas: Must contain a list of references to DMA specifiers.
+ - dma-names : Must contain a list of DMA names, "tx" or "rx".
Example:
usbhs: usb@e6590000 {
diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
index 43c1a4e06767..0b04fdff9d5a 100644
--- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
@@ -12,6 +12,7 @@ Optional properties:
- big-endian-regs : boolean, set this for hcds with big-endian registers
- big-endian-desc : boolean, set this for hcds with big-endian descriptors
- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
+ - needs-reset-on-resume : boolean, set this to force EHCI reset after resume
- clocks : a list of phandle + clock specifier pairs
- phys : phandle + phy specifier pair
- phy-names : "usb"
diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
index 1bd37faba05b..5be01c859b7a 100644
--- a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
+++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
@@ -13,10 +13,15 @@ Optional properties:
- clock-frequency: the clock frequency (in Hz) that the PHY clock must
be configured to.
-- vcc-supply: phandle to the regulator that provides RESET to the PHY.
+- vcc-supply: phandle to the regulator that provides power to the PHY.
- reset-gpios: Should specify the GPIO for reset.
+- vbus-detect-gpio: should specify the GPIO detecting a VBus insertion
+ (see Documentation/devicetree/bindings/gpio/gpio.txt)
+- vbus-regulator : should specifiy the regulator supplying current drawn from
+ the VBus line (see Documentation/devicetree/bindings/regulator/regulator.txt).
+
Example:
hsusb1_phy {
@@ -26,8 +31,11 @@ Example:
clock-names = "main_clk";
vcc-supply = <&hsusb1_vcc_regulator>;
reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ vbus-regulator = <&vbus_regulator>;
};
hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator
and expects that clock to be configured to 19.2MHz by the NOP PHY driver.
hsusb1_vcc_regulator provides power to the PHY and GPIO 7 controls RESET.
+GPIO 13 detects VBus insertion, and accordingly notifies the vbus-regulator.
diff --git a/Documentation/usb/gadget-testing.txt b/Documentation/usb/gadget-testing.txt
new file mode 100644
index 000000000000..076ac7ba7f93
--- /dev/null
+++ b/Documentation/usb/gadget-testing.txt
@@ -0,0 +1,728 @@
+This file summarizes information on basic testing of USB functions
+provided by gadgets.
+
+1. ACM function
+2. ECM function
+3. ECM subset function
+4. EEM function
+5. FFS function
+6. HID function
+7. LOOPBACK function
+8. MASS STORAGE function
+9. MIDI function
+10. NCM function
+11. OBEX function
+12. PHONET function
+13. RNDIS function
+14. SERIAL function
+15. SOURCESINK function
+16. UAC1 function
+17. UAC2 function
+18. UVC function
+
+
+1. ACM function
+===============
+
+The function is provided by usb_f_acm.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "acm".
+The ACM function provides just one attribute in its function directory:
+
+ port_num
+
+The attribute is read-only.
+
+There can be at most 4 ACM/generic serial/OBEX ports in the system.
+
+
+Testing the ACM function
+------------------------
+
+On the host: cat > /dev/ttyACM<X>
+On the device : cat /dev/ttyGS<Y>
+
+then the other way round
+
+On the device: cat > /dev/ttyGS<Y>
+On the host: cat /dev/ttyACM<X>
+
+2. ECM function
+===============
+
+The function is provided by usb_f_ecm.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "ecm".
+The ECM function provides these attributes in its function directory:
+
+ ifname - network device interface name associated with this
+ function instance
+ qmult - queue length multiplier for high and super speed
+ host_addr - MAC address of host's end of this
+ Ethernet over USB link
+ dev_addr - MAC address of device's end of this
+ Ethernet over USB link
+
+and after creating the functions/ecm.<instance name> they contain default
+values: qmult is 5, dev_addr and host_addr are randomly selected.
+Except for ifname they can be written to until the function is linked to a
+configuration. The ifname is read-only and contains the name of the interface
+which was assigned by the net core, e. g. usb0.
+
+Testing the ECM function
+------------------------
+
+Configure IP addresses of the device and the host. Then:
+
+On the device: ping <host's IP>
+On the host: ping <device's IP>
+
+3. ECM subset function
+======================
+
+The function is provided by usb_f_ecm_subset.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "geth".
+The ECM subset function provides these attributes in its function directory:
+
+ ifname - network device interface name associated with this
+ function instance
+ qmult - queue length multiplier for high and super speed
+ host_addr - MAC address of host's end of this
+ Ethernet over USB link
+ dev_addr - MAC address of device's end of this
+ Ethernet over USB link
+
+and after creating the functions/ecm.<instance name> they contain default
+values: qmult is 5, dev_addr and host_addr are randomly selected.
+Except for ifname they can be written to until the function is linked to a
+configuration. The ifname is read-only and contains the name of the interface
+which was assigned by the net core, e. g. usb0.
+
+Testing the ECM subset function
+-------------------------------
+
+Configure IP addresses of the device and the host. Then:
+
+On the device: ping <host's IP>
+On the host: ping <device's IP>
+
+4. EEM function
+===============
+
+The function is provided by usb_f_eem.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "eem".
+The EEM function provides these attributes in its function directory:
+
+ ifname - network device interface name associated with this
+ function instance
+ qmult - queue length multiplier for high and super speed
+ host_addr - MAC address of host's end of this
+ Ethernet over USB link
+ dev_addr - MAC address of device's end of this
+ Ethernet over USB link
+
+and after creating the functions/eem.<instance name> they contain default
+values: qmult is 5, dev_addr and host_addr are randomly selected.
+Except for ifname they can be written to until the function is linked to a
+configuration. The ifname is read-only and contains the name of the interface
+which was assigned by the net core, e. g. usb0.
+
+Testing the EEM function
+------------------------
+
+Configure IP addresses of the device and the host. Then:
+
+On the device: ping <host's IP>
+On the host: ping <device's IP>
+
+5. FFS function
+===============
+
+The function is provided by usb_f_fs.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "ffs".
+The function directory is intentionally empty and not modifiable.
+
+After creating the directory there is a new instance (a "device") of FunctionFS
+available in the system. Once a "device" is available, the user should follow
+the standard procedure for using FunctionFS (mount it, run the userspace
+process which implements the function proper). The gadget should be enabled
+by writing a suitable string to usb_gadget/<gadget>/UDC.
+
+Testing the FFS function
+------------------------
+
+On the device: start the function's userspace daemon, enable the gadget
+On the host: use the USB function provided by the device
+
+6. HID function
+===============
+
+The function is provided by usb_f_hid.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "hid".
+The HID function provides these attributes in its function directory:
+
+ protocol - HID protocol to use
+ report_desc - data to be used in HID reports, except data
+ passed with /dev/hidg<X>
+ report_length - HID report length
+ subclass - HID subclass to use
+
+For a keyboard the protocol and the subclass are 1, the report_length is 8,
+while the report_desc is:
+
+$ hd my_report_desc
+00000000 05 01 09 06 a1 01 05 07 19 e0 29 e7 15 00 25 01 |..........)...%.|
+00000010 75 01 95 08 81 02 95 01 75 08 81 03 95 05 75 01 |u.......u.....u.|
+00000020 05 08 19 01 29 05 91 02 95 01 75 03 91 03 95 06 |....).....u.....|
+00000030 75 08 15 00 25 65 05 07 19 00 29 65 81 00 c0 |u...%e....)e...|
+0000003f
+
+Such a sequence of bytes can be stored to the attribute with echo:
+
+$ echo -ne \\x05\\x01\\x09\\x06\\xa1.....
+
+Testing the HID function
+------------------------
+
+Device:
+- create the gadget
+- connect the gadget to a host, preferably not the one used
+to control the gadget
+- run a program which writes to /dev/hidg<N>, e.g.
+a userspace program found in Documentation/usb/gadget_hid.txt:
+
+$ ./hid_gadget_test /dev/hidg0 keyboard
+
+Host:
+- observe the keystrokes from the gadget
+
+7. LOOPBACK function
+====================
+
+The function is provided by usb_f_ss_lb.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "Loopback".
+The LOOPBACK function provides these attributes in its function directory:
+
+ qlen - depth of loopback queue
+ bulk_buflen - buffer length
+
+Testing the LOOPBACK function
+-----------------------------
+
+device: run the gadget
+host: test-usb
+
+http://www.linux-usb.org/usbtest/testusb.c
+
+8. MASS STORAGE function
+========================
+
+The function is provided by usb_f_mass_storage.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "mass_storage".
+The MASS STORAGE function provides these attributes in its directory:
+files:
+
+ stall - Set to permit function to halt bulk endpoints.
+ Disabled on some USB devices known not to work
+ correctly. You should set it to true.
+ num_buffers - Number of pipeline buffers. Valid numbers
+ are 2..4. Available only if
+ CONFIG_USB_GADGET_DEBUG_FILES is set.
+
+and a default lun.0 directory corresponding to SCSI LUN #0.
+
+A new lun can be added with mkdir:
+
+$ mkdir functions/mass_storage.0/partition.5
+
+Lun numbering does not have to be continuous, except for lun #0 which is
+created by default. A maximum of 8 luns can be specified and they all must be
+named following the <name>.<number> scheme. The numbers can be 0..8.
+Probably a good convention is to name the luns "lun.<number>",
+although it is not mandatory.
+
+In each lun directory there are the following attribute files:
+
+ file - The path to the backing file for the LUN.
+ Required if LUN is not marked as removable.
+ ro - Flag specifying access to the LUN shall be
+ read-only. This is implied if CD-ROM emulation
+ is enabled as well as when it was impossible
+ to open "filename" in R/W mode.
+ removable - Flag specifying that LUN shall be indicated as
+ being removable.
+ cdrom - Flag specifying that LUN shall be reported as
+ being a CD-ROM.
+ nofua - Flag specifying that FUA flag
+ in SCSI WRITE(10,12)
+
+Testing the MASS STORAGE function
+---------------------------------
+
+device: connect the gadget, enable it
+host: dmesg, see the USB drives appear (if system configured to automatically
+mount)
+
+9. MIDI function
+================
+
+The function is provided by usb_f_midi.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "midi".
+The MIDI function provides these attributes in its function directory:
+
+ buflen - MIDI buffer length
+ id - ID string for the USB MIDI adapter
+ in_ports - number of MIDI input ports
+ index - index value for the USB MIDI adapter
+ out_ports - number of MIDI output ports
+ qlen - USB read request queue length
+
+Testing the MIDI function
+-------------------------
+
+There are two cases: playing a mid from the gadget to
+the host and playing a mid from the host to the gadget.
+
+1) Playing a mid from the gadget to the host
+host)
+
+$ arecordmidi -l
+ Port Client name Port name
+ 14:0 Midi Through Midi Through Port-0
+ 24:0 MIDI Gadget MIDI Gadget MIDI 1
+$ arecordmidi -p 24:0 from_gadget.mid
+
+gadget)
+
+$ aplaymidi -l
+ Port Client name Port name
+ 20:0 f_midi f_midi
+
+$ aplaymidi -p 20:0 to_host.mid
+
+2) Playing a mid from the host to the gadget
+gadget)
+
+$ arecordmidi -l
+ Port Client name Port name
+ 20:0 f_midi f_midi
+
+$ arecordmidi -p 20:0 from_host.mid
+
+host)
+
+$ aplaymidi -l
+ Port Client name Port name
+ 14:0 Midi Through Midi Through Port-0
+ 24:0 MIDI Gadget MIDI Gadget MIDI 1
+
+$ aplaymidi -p24:0 to_gadget.mid
+
+The from_gadget.mid should sound identical to the to_host.mid.
+The from_host.id should sound identical to the to_gadget.mid.
+
+MIDI files can be played to speakers/headphones with e.g. timidity installed
+
+$ aplaymidi -l
+ Port Client name Port name
+ 14:0 Midi Through Midi Through Port-0
+ 24:0 MIDI Gadget MIDI Gadget MIDI 1
+128:0 TiMidity TiMidity port 0
+128:1 TiMidity TiMidity port 1
+128:2 TiMidity TiMidity port 2
+128:3 TiMidity TiMidity port 3
+
+$ aplaymidi -p 128:0 file.mid
+
+MIDI ports can be logically connected using the aconnect utility, e.g.:
+
+$ aconnect 24:0 128:0 # try it on the host
+
+After the gadget's MIDI port is connected to timidity's MIDI port,
+whatever is played at the gadget side with aplaymidi -l is audible
+in host's speakers/headphones.
+
+10. NCM function
+================
+
+The function is provided by usb_f_ncm.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "ncm".
+The NCM function provides these attributes in its function directory:
+
+ ifname - network device interface name associated with this
+ function instance
+ qmult - queue length multiplier for high and super speed
+ host_addr - MAC address of host's end of this
+ Ethernet over USB link
+ dev_addr - MAC address of device's end of this
+ Ethernet over USB link
+
+and after creating the functions/ncm.<instance name> they contain default
+values: qmult is 5, dev_addr and host_addr are randomly selected.
+Except for ifname they can be written to until the function is linked to a
+configuration. The ifname is read-only and contains the name of the interface
+which was assigned by the net core, e. g. usb0.
+
+Testing the NCM function
+------------------------
+
+Configure IP addresses of the device and the host. Then:
+
+On the device: ping <host's IP>
+On the host: ping <device's IP>
+
+11. OBEX function
+=================
+
+The function is provided by usb_f_obex.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "obex".
+The OBEX function provides just one attribute in its function directory:
+
+ port_num
+
+The attribute is read-only.
+
+There can be at most 4 ACM/generic serial/OBEX ports in the system.
+
+Testing the OBEX function
+-------------------------
+
+On device: seriald -f /dev/ttyGS<Y> -s 1024
+On host: serialc -v <vendorID> -p <productID> -i<interface#> -a1 -s1024 \
+ -t<out endpoint addr> -r<in endpoint addr>
+
+where seriald and serialc are Felipe's utilities found here:
+
+https://git.gitorious.org/usb/usb-tools.git master
+
+12. PHONET function
+===================
+
+The function is provided by usb_f_phonet.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "phonet".
+The PHONET function provides just one attribute in its function directory:
+
+ ifname - network device interface name associated with this
+ function instance
+
+Testing the PHONET function
+---------------------------
+
+It is not possible to test the SOCK_STREAM protocol without a specific piece
+of hardware, so only SOCK_DGRAM has been tested. For the latter to work,
+in the past I had to apply the patch mentioned here:
+
+http://www.spinics.net/lists/linux-usb/msg85689.html
+
+These tools are required:
+
+git://git.gitorious.org/meego-cellular/phonet-utils.git
+
+On the host:
+
+$ ./phonet -a 0x10 -i usbpn0
+$ ./pnroute add 0x6c usbpn0
+$./pnroute add 0x10 usbpn0
+$ ifconfig usbpn0 up
+
+On the device:
+
+$ ./phonet -a 0x6c -i upnlink0
+$ ./pnroute add 0x10 upnlink0
+$ ifconfig upnlink0 up
+
+Then a test program can be used:
+
+http://www.spinics.net/lists/linux-usb/msg85690.html
+
+On the device:
+
+$ ./pnxmit -a 0x6c -r
+
+On the host:
+
+$ ./pnxmit -a 0x10 -s 0x6c
+
+As a result some data should be sent from host to device.
+Then the other way round:
+
+On the host:
+
+$ ./pnxmit -a 0x10 -r
+
+On the device:
+
+$ ./pnxmit -a 0x6c -s 0x10
+
+13. RNDIS function
+==================
+
+The function is provided by usb_f_rndis.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "rndis".
+The RNDIS function provides these attributes in its function directory:
+
+ ifname - network device interface name associated with this
+ function instance
+ qmult - queue length multiplier for high and super speed
+ host_addr - MAC address of host's end of this
+ Ethernet over USB link
+ dev_addr - MAC address of device's end of this
+ Ethernet over USB link
+
+and after creating the functions/rndis.<instance name> they contain default
+values: qmult is 5, dev_addr and host_addr are randomly selected.
+Except for ifname they can be written to until the function is linked to a
+configuration. The ifname is read-only and contains the name of the interface
+which was assigned by the net core, e. g. usb0.
+
+By default there can be only 1 RNDIS interface in the system.
+
+Testing the RNDIS function
+--------------------------
+
+Configure IP addresses of the device and the host. Then:
+
+On the device: ping <host's IP>
+On the host: ping <device's IP>
+
+14. SERIAL function
+===================
+
+The function is provided by usb_f_gser.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "gser".
+The SERIAL function provides just one attribute in its function directory:
+
+ port_num
+
+The attribute is read-only.
+
+There can be at most 4 ACM/generic serial/OBEX ports in the system.
+
+Testing the SERIAL function
+---------------------------
+
+On host: insmod usbserial
+ echo VID PID >/sys/bus/usb-serial/drivers/generic/new_id
+On host: cat > /dev/ttyUSB<X>
+On target: cat /dev/ttyGS<Y>
+
+then the other way round
+
+On target: cat > /dev/ttyGS<Y>
+On host: cat /dev/ttyUSB<X>
+
+15. SOURCESINK function
+=======================
+
+The function is provided by usb_f_ss_lb.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "SourceSink".
+The SOURCESINK function provides these attributes in its function directory:
+
+ pattern - 0 (all zeros), 1 (mod63), 2 (none)
+ isoc_interval - 1..16
+ isoc_maxpacket - 0 - 1023 (fs), 0 - 1024 (hs/ss)
+ isoc_mult - 0..2 (hs/ss only)
+ isoc_maxburst - 0..15 (ss only)
+ bulk_buflen - buffer length
+
+Testing the SOURCESINK function
+-------------------------------
+
+device: run the gadget
+host: test-usb
+
+http://www.linux-usb.org/usbtest/testusb.c
+
+16. UAC1 function
+=================
+
+The function is provided by usb_f_uac1.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "uac1".
+The uac1 function provides these attributes in its function directory:
+
+ audio_buf_size - audio buffer size
+ fn_cap - capture pcm device file name
+ fn_cntl - control device file name
+ fn_play - playback pcm device file name
+ req_buf_size - ISO OUT endpoint request buffer size
+ req_count - ISO OUT endpoint request count
+
+The attributes have sane default values.
+
+Testing the UAC1 function
+-------------------------
+
+device: run the gadget
+host: aplay -l # should list our USB Audio Gadget
+
+17. UAC2 function
+=================
+
+The function is provided by usb_f_uac2.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "uac2".
+The uac2 function provides these attributes in its function directory:
+
+ chmask - capture channel mask
+ c_srate - capture sampling rate
+ c_ssize - capture sample size (bytes)
+ p_chmask - playback channel mask
+ p_srate - playback sampling rate
+ p_ssize - playback sample size (bytes)
+
+The attributes have sane default values.
+
+Testing the UAC2 function
+-------------------------
+
+device: run the gadget
+host: aplay -l # should list our USB Audio Gadget
+
+This function does not require real hardware support, it just
+sends a stream of audio data to/from the host. In order to
+actually hear something at the device side, a command similar
+to this must be used at the device side:
+
+$ arecord -f dat -t wav -D hw:2,0 | aplay -D hw:0,0 &
+
+e.g.:
+
+$ arecord -f dat -t wav -D hw:CARD=UAC2Gadget,DEV=0 | \
+aplay -D default:CARD=OdroidU3
+
+18. UVC function
+================
+
+The function is provided by usb_f_uvc.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "uvc".
+The uvc function provides these attributes in its function directory:
+
+ streaming_interval - interval for polling endpoint for data transfers
+ streaming_maxburst - bMaxBurst for super speed companion descriptor
+ streaming_maxpacket - maximum packet size this endpoint is capable of
+ sending or receiving when this configuration is
+ selected
+
+There are also "control" and "streaming" subdirectories, each of which contain
+a number of their subdirectories. There are some sane defaults provided, but
+the user must provide the following:
+
+ control header - create in control/header, link from control/class/fs
+ and/or control/class/ss
+ streaming header - create in streaming/header, link from
+ streaming/class/fs and/or streaming/class/hs and/or
+ streaming/class/ss
+ format description - create in streaming/mjpeg and/or
+ streaming/uncompressed
+ frame description - create in streaming/mjpeg/<format> and/or in
+ streaming/uncompressed/<format>
+
+Each frame description contains frame interval specification, and each
+such specification consists of a number of lines with an inverval value
+in each line. The rules stated above are best illustrated with an example:
+
+# mkdir functions/uvc.usb0/control/header/h
+# cd functions/uvc.usb0/control/header/h
+# ln -s header/h class/fs
+# ln -s header/h class/ss
+# mkdir -p functions/uvc.usb0/streaming/uncompressed/u/360p
+# cat <<EOF > functions/uvc.usb0/streaming/uncompressed/u/360p/dwFrameInterval
+666666
+1000000
+5000000
+EOF
+# cd $GADGET_CONFIGFS_ROOT
+# mkdir functions/uvc.usb0/streaming/header/h
+# cd functions/uvc.usb0/streaming/header/h
+# ln -s ../../uncompressed/u
+# cd ../../class/fs
+# ln -s ../../header/h
+# cd ../../class/hs
+# ln -s ../../header/h
+# cd ../../class/ss
+# ln -s ../../header/h
+
+
+Testing the UVC function
+------------------------
+
+device: run the gadget, modprobe vivid
+
+# uvc-gadget -u /dev/video<uvc video node #> -v /dev/video<vivid video node #>
+
+where uvc-gadget is this program:
+http://git.ideasonboard.org/uvc-gadget.git
+
+with these patches:
+http://www.spinics.net/lists/linux-usb/msg99220.html
+
+host: luvcview -f yuv
diff --git a/Documentation/usb/gadget_serial.txt b/Documentation/usb/gadget_serial.txt
index 61e67f6a20a0..6b4a88a8c8e3 100644
--- a/Documentation/usb/gadget_serial.txt
+++ b/Documentation/usb/gadget_serial.txt
@@ -236,8 +236,12 @@ I: If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=serial
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-You must explicitly load the usbserial driver with parameters to
-configure it to recognize the gadget serial device, like this:
+You must load the usbserial driver and explicitly set its parameters
+to configure it to recognize the gadget serial device, like this:
+
+ echo 0x0525 0xA4A6 >/sys/bus/usb-serial/drivers/generic/new_id
+
+The legacy way is to use module parameters:
modprobe usbserial vendor=0x0525 product=0xA4A6
diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt
index 7587d84ebd16..28425f736756 100644
--- a/Documentation/usb/usbmon.txt
+++ b/Documentation/usb/usbmon.txt
@@ -72,7 +72,7 @@ to listen on a single bus, otherwise, to listen on all buses, type:
# cat /sys/kernel/debug/usb/usbmon/0u > /tmp/1.mon.out
-This process will be reading until killed. Naturally, the output can be
+This process will read until it is killed. Naturally, the output can be
redirected to a desirable location. This is preferred, because it is going
to be quite long.