Merge tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Heiko Carstens:

 - Add vfio-ap support to pass-through crypto devices to secure
   execution guests

 - Add API ordinal 6 support to zcrypt_ep11misc device drive, which is
   required to handle key generate and key derive (e.g. secure key to
   protected key) correctly

 - Add missing secure/has_secure sysfs files for the case where it is
   not possible to figure where a system has been booted from. Existing
   user space relies on that these files are always present

 - Fix DCSS block device driver list corruption, caused by incorrect
   error handling

 - Convert virt_to_pfn() and pfn_to_virt() from defines to static inline
   functions to enforce type checking

 - Cleanups, improvements, and minor fixes to the kernel mapping setup

 - Fix various virtual vs physical address confusions

 - Move pfault code to separate file, since it has nothing to do with
   regular fault handling

 - Move s390 documentation to Documentation/arch/ like it has been done
   for other architectures already

 - Add HAVE_FUNCTION_GRAPH_RETVAL support

 - Factor out the s390_hypfs filesystem and add a new config option for
   it. The filesystem is deprecated and as soon as all users are gone it
   can be removed some time in the not so near future

 - Remove support for old CEX2 and CEX3 crypto cards from zcrypt device
   driver

 - Add support for user-defined certificates: receive user-defined
   certificates with a diagnose call and provide them via 'cert_store'
   keyring to user space

 - Couple of other small fixes and improvements all over the place

* tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits)
  s390/pci: use builtin_misc_device macro to simplify the code
  s390/vfio-ap: make sure nib is shared
  KVM: s390: export kvm_s390_pv*_is_protected functions
  s390/uv: export uv_pin_shared for direct usage
  s390/vfio-ap: check for TAPQ response codes 0x35 and 0x36
  s390/vfio-ap: handle queue state change in progress on reset
  s390/vfio-ap: use work struct to verify queue reset
  s390/vfio-ap: store entire AP queue status word with the queue object
  s390/vfio-ap: remove upper limit on wait for queue reset to complete
  s390/vfio-ap: allow deconfigured queue to be passed through to a guest
  s390/vfio-ap: wait for response code 05 to clear on queue reset
  s390/vfio-ap: clean up irq resources if possible
  s390/vfio-ap: no need to check the 'E' and 'I' bits in APQSW after TAPQ
  s390/ipl: refactor deprecated strncpy
  s390/ipl: fix virtual vs physical address confusion
  s390/zcrypt_ep11misc: support API ordinal 6 with empty pin-blob
  s390/paes: fix PKEY_TYPE_EP11_AES handling for secure keyblobs
  s390/pkey: fix PKEY_TYPE_EP11_AES handling for sysfs attributes
  s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_VERIFYKEY2 IOCTL
  s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_KBLOB2PROTK[23]
  ...

20 files changed, 11 insertions, 11 deletions

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 77bda843df34..d526eba1838a 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -553,7 +553,7 @@
 			others).
 
 	ccw_timeout_log	[S390]
-			See Documentation/s390/common_io.rst for details.
+			See Documentation/arch/s390/common_io.rst for details.
 
 	cgroup_disable=	[KNL] Disable a particular controller or optional feature
 			Format: {name of the controller(s) or feature(s) to disable}
@@ -598,7 +598,7 @@
 			Setting checkreqprot to 1 is deprecated.
 
 	cio_ignore=	[S390]
-			See Documentation/s390/common_io.rst for details.
+			See Documentation/arch/s390/common_io.rst for details.
 
 	clearcpuid=X[,X...] [X86]
 			Disable CPUID feature X for the kernel. See
diff --git a/Documentation/arch/index.rst b/Documentation/arch/index.rst
index 8458b88e9b79..c9a209878cf3 100644
--- a/Documentation/arch/index.rst
+++ b/Documentation/arch/index.rst
@@ -21,7 +21,7 @@ implementation.
    parisc/index
    ../powerpc/index
    ../riscv/index
-   ../s390/index
+   s390/index
    sh/index
    sparc/index
    x86/index
diff --git a/Documentation/s390/3270.ChangeLog b/Documentation/arch/s390/3270.ChangeLog
index ecaf60b6c381..ecaf60b6c381 100644
--- a/Documentation/s390/3270.ChangeLog
+++ b/Documentation/arch/s390/3270.ChangeLog
diff --git a/Documentation/s390/3270.rst b/Documentation/arch/s390/3270.rst
index e09e77954238..467eace91473 100644
--- a/Documentation/s390/3270.rst
+++ b/Documentation/arch/s390/3270.rst
@@ -116,7 +116,7 @@ Here are the installation steps in detail:
 	as a 3270, not a 3215.
 
 	5. Run the 3270 configuration script config3270.  It is
-	distributed in this same directory, Documentation/s390, as
+	distributed in this same directory, Documentation/arch/s390, as
 	config3270.sh.  Inspect the output script it produces,
 	/tmp/mkdev3270, and then run that script.  This will create the
 	necessary character special device files and make the necessary
@@ -125,7 +125,7 @@ Here are the installation steps in detail:
 	Then notify /sbin/init that /etc/inittab has changed, by issuing
 	the telinit command with the q operand::
 
-		cd Documentation/s390
+		cd Documentation/arch/s390
 		sh config3270.sh
 		sh /tmp/mkdev3270
 		telinit q
diff --git a/Documentation/s390/cds.rst b/Documentation/arch/s390/cds.rst
index 7006d8209d2e..bcad2a14244a 100644
--- a/Documentation/s390/cds.rst
+++ b/Documentation/arch/s390/cds.rst
@@ -39,7 +39,7 @@ some of them are ESA/390 platform specific.
 
 Note:
   In order to write a driver for S/390, you also need to look into the interface
-  described in Documentation/s390/driver-model.rst.
+  described in Documentation/arch/s390/driver-model.rst.
 
 Note for porting drivers from 2.4:
 
diff --git a/Documentation/s390/common_io.rst b/Documentation/arch/s390/common_io.rst
index 846485681ce7..6dcb40cb7145 100644
--- a/Documentation/s390/common_io.rst
+++ b/Documentation/arch/s390/common_io.rst
@@ -136,5 +136,5 @@ debugfs entries
 
   The level of logging can be changed to be more or less verbose by piping to
   /sys/kernel/debug/s390dbf/cio_*/level a number between 0 and 6; see the
-  documentation on the S/390 debug feature (Documentation/s390/s390dbf.rst)
+  documentation on the S/390 debug feature (Documentation/arch/s390/s390dbf.rst)
   for details.
diff --git a/Documentation/s390/config3270.sh b/Documentation/arch/s390/config3270.sh
index 515e2f431487..515e2f431487 100644
--- a/Documentation/s390/config3270.sh
+++ b/Documentation/arch/s390/config3270.sh
diff --git a/Documentation/s390/driver-model.rst b/Documentation/arch/s390/driver-model.rst
index ad4bc2dbea43..ad4bc2dbea43 100644
--- a/Documentation/s390/driver-model.rst
+++ b/Documentation/arch/s390/driver-model.rst
diff --git a/Documentation/s390/features.rst b/Documentation/arch/s390/features.rst
index 57c296a9d8f3..57c296a9d8f3 100644
--- a/Documentation/s390/features.rst
+++ b/Documentation/arch/s390/features.rst
diff --git a/Documentation/s390/index.rst b/Documentation/arch/s390/index.rst
index 73c79bf586fd..73c79bf586fd 100644
--- a/Documentation/s390/index.rst
+++ b/Documentation/arch/s390/index.rst
diff --git a/Documentation/s390/monreader.rst b/Documentation/arch/s390/monreader.rst
index 21cdfb699b49..21cdfb699b49 100644
--- a/Documentation/s390/monreader.rst
+++ b/Documentation/arch/s390/monreader.rst
diff --git a/Documentation/s390/pci.rst b/Documentation/arch/s390/pci.rst
index a1a72a47dc96..d5755484d8e7 100644
--- a/Documentation/s390/pci.rst
+++ b/Documentation/arch/s390/pci.rst
@@ -40,7 +40,7 @@ For example:
   Change the level of logging to be more or less verbose by piping
   a number between 0 and 6 to  /sys/kernel/debug/s390dbf/pci_*/level. For
   details, see the documentation on the S/390 debug feature at
-  Documentation/s390/s390dbf.rst.
+  Documentation/arch/s390/s390dbf.rst.
 
 Sysfs entries
 =============
diff --git a/Documentation/s390/qeth.rst b/Documentation/arch/s390/qeth.rst
index f02fdaa68de0..f02fdaa68de0 100644
--- a/Documentation/s390/qeth.rst
+++ b/Documentation/arch/s390/qeth.rst
diff --git a/Documentation/s390/s390dbf.rst b/Documentation/arch/s390/s390dbf.rst
index af8bdc3629e7..af8bdc3629e7 100644
--- a/Documentation/s390/s390dbf.rst
+++ b/Documentation/arch/s390/s390dbf.rst
diff --git a/Documentation/s390/text_files.rst b/Documentation/arch/s390/text_files.rst
index c94d05d4fa17..c94d05d4fa17 100644
--- a/Documentation/s390/text_files.rst
+++ b/Documentation/arch/s390/text_files.rst
diff --git a/Documentation/s390/vfio-ap-locking.rst b/Documentation/arch/s390/vfio-ap-locking.rst
index 0dfcdb562e21..0dfcdb562e21 100644
--- a/Documentation/s390/vfio-ap-locking.rst
+++ b/Documentation/arch/s390/vfio-ap-locking.rst
diff --git a/Documentation/s390/vfio-ap.rst b/Documentation/arch/s390/vfio-ap.rst
index bb3f4c4e2885..bb3f4c4e2885 100644
--- a/Documentation/s390/vfio-ap.rst
+++ b/Documentation/arch/s390/vfio-ap.rst
diff --git a/Documentation/s390/vfio-ccw.rst b/Documentation/arch/s390/vfio-ccw.rst
index 37026fa18179..42960b7b0d70 100644
--- a/Documentation/s390/vfio-ccw.rst
+++ b/Documentation/arch/s390/vfio-ccw.rst
@@ -440,6 +440,6 @@ Reference
 1. ESA/s390 Principles of Operation manual (IBM Form. No. SA22-7832)
 2. ESA/390 Common I/O Device Commands manual (IBM Form. No. SA22-7204)
 3. https://en.wikipedia.org/wiki/Channel_I/O
-4. Documentation/s390/cds.rst
+4. Documentation/arch/s390/cds.rst
 5. Documentation/driver-api/vfio.rst
 6. Documentation/driver-api/vfio-mediated-device.rst
diff --git a/Documentation/s390/zfcpdump.rst b/Documentation/arch/s390/zfcpdump.rst
index a61de7aa8778..a61de7aa8778 100644
--- a/Documentation/s390/zfcpdump.rst
+++ b/Documentation/arch/s390/zfcpdump.rst
diff --git a/Documentation/driver-api/s390-drivers.rst b/Documentation/driver-api/s390-drivers.rst
index 5158577bc29b..8c0845c4eee7 100644
--- a/Documentation/driver-api/s390-drivers.rst
+++ b/Documentation/driver-api/s390-drivers.rst
@@ -27,7 +27,7 @@ not strictly considered I/O devices. They are considered here as well,
 although they are not the focus of this document.
 
 Some additional information can also be found in the kernel source under
-Documentation/s390/driver-model.rst.
+Documentation/arch/s390/driver-model.rst.
 
 The css bus
 ===========
@@ -38,7 +38,7 @@ into several categories:
 * Standard I/O subchannels, for use by the system. They have a child
   device on the ccw bus and are described below.
 * I/O subchannels bound to the vfio-ccw driver. See
-  Documentation/s390/vfio-ccw.rst.
+  Documentation/arch/s390/vfio-ccw.rst.
 * Message subchannels. No Linux driver currently exists.
 * CHSC subchannels (at most one). The chsc subchannel driver can be used
   to send asynchronous chsc commands.