Merge tag 'for-net-next-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Luiz Augusto von Dentz says:

====================
bluetooth-next pull request for net-next:

 - Add support for QCA_ROME device (0cf3:e500) and RTL8822CE
 - Update management interface revision to 21
 - Use of incluse language
 - Proper handling of HCI_LE_Advertising_Set_Terminated event
 - Recovery handing of HCI ncmd=0
 - Various memory fixes
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 183 insertions, 69 deletions

diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
deleted file mode 100644
index 709ca6d51650..000000000000
--- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-Qualcomm Bluetooth Chips
----------------------
-
-This documents the binding structure and common properties for serial
-attached Qualcomm devices.
-
-Serial attached Qualcomm devices shall be a child node of the host UART
-device the slave device is attached to.
-
-Required properties:
- - compatible: should contain one of the following:
-   * "qcom,qca6174-bt"
-   * "qcom,qca9377-bt"
-   * "qcom,wcn3990-bt"
-   * "qcom,wcn3991-bt"
-   * "qcom,wcn3998-bt"
-   * "qcom,qca6390-bt"
-
-Optional properties for compatible string qcom,qca6174-bt:
-
- - enable-gpios: gpio specifier used to enable chip
- - clocks: clock provided to the controller (SUSCLK_32KHZ)
- - firmware-name: specify the name of nvm firmware to load
-
-Optional properties for compatible string qcom,qca9377-bt:
-
- - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml
-
-Required properties for compatible string qcom,wcn399x-bt:
-
- - vddio-supply: VDD_IO supply regulator handle.
- - vddxo-supply: VDD_XO supply regulator handle.
- - vddrf-supply: VDD_RF supply regulator handle.
- - vddch0-supply: VDD_CH0 supply regulator handle.
-
-Optional properties for compatible string qcom,wcn399x-bt:
-
- - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml
- - firmware-name: specify the name of nvm firmware to load
- - clocks: clock provided to the controller
-
-Examples:
-
-serial@7570000 {
-	label = "BT-UART";
-	status = "okay";
-
-	bluetooth {
-		compatible = "qcom,qca6174-bt";
-
-		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
-		clocks = <&divclk4>;
-		firmware-name = "nvm_00440302.bin";
-	};
-};
-
-serial@898000 {
-	bluetooth {
-		compatible = "qcom,wcn3990-bt";
-
-		vddio-supply = <&vreg_s4a_1p8>;
-		vddxo-supply = <&vreg_l7a_1p8>;
-		vddrf-supply = <&vreg_l17a_1p3>;
-		vddch0-supply = <&vreg_l25a_3p3>;
-		max-speed = <3200000>;
-		firmware-name = "crnv21.bin";
-		clocks = <&rpmhcc RPMH_RF_CLK2>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
new file mode 100644
index 000000000000..f93c6e7a1b59
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qualcomm-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Bluetooth Chips
+
+maintainers:
+  - Balakrishna Godavarthi <bgodavar@codeaurora.org>
+  - Rocky Liao <rjliao@codeaurora.org>
+
+description:
+  This binding describes Qualcomm UART-attached bluetooth chips.
+
+properties:
+  compatible:
+    enum:
+      - qcom,qca6174-bt
+      - qcom,qca9377-bt
+      - qcom,wcn3990-bt
+      - qcom,wcn3991-bt
+      - qcom,wcn3998-bt
+      - qcom,qca6390-bt
+      - qcom,wcn6750-bt
+
+  enable-gpios:
+    maxItems: 1
+    description: gpio specifier used to enable chip
+
+  swctrl-gpios:
+    maxItems: 1
+    description: gpio specifier is used to find status
+                 of clock supply to SoC
+
+  clocks:
+    maxItems: 1
+    description: clock provided to the controller (SUSCLK_32KHZ)
+
+  vddio-supply:
+    description: VDD_IO supply regulator handle
+
+  vddxo-supply:
+    description: VDD_XO supply regulator handle
+
+  vddrf-supply:
+    description: VDD_RF supply regulator handle
+
+  vddch0-supply:
+    description: VDD_CH0 supply regulator handle
+
+  vddaon-supply:
+    description: VDD_AON supply regulator handle
+
+  vddbtcxmx-supply:
+    description: VDD_BT_CXMX supply regulator handle
+
+  vddrfacmn-supply:
+    description: VDD_RFA_CMN supply regulator handle
+
+  vddrfa0p8-supply:
+    description: VDD_RFA_0P8 suppply regulator handle
+
+  vddrfa1p7-supply:
+    description: VDD_RFA_1P7 supply regulator handle
+
+  vddrfa1p2-supply:
+    description: VDD_RFA_1P2 supply regulator handle
+
+  vddrfa2p2-supply:
+    description: VDD_RFA_2P2 supply regulator handle
+
+  vddasd-supply:
+    description: VDD_ASD supply regulator handle
+
+  max-speed:
+    description: see Documentation/devicetree/bindings/serial/serial.yaml
+
+  firmware-name:
+    description: specify the name of nvm firmware to load
+
+  local-bd-address:
+    description: see Documentation/devicetree/bindings/net/bluetooth.txt
+
+
+required:
+  - compatible
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qca6174-bt
+    then:
+      required:
+        - enable-gpios
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,wcn3990-bt
+              - qcom,wcn3991-bt
+              - qcom,wcn3998-bt
+    then:
+      required:
+        - vddio-supply
+        - vddxo-supply
+        - vddrf-supply
+        - vddch0-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,wcn6750-bt
+    then:
+      required:
+        - enable-gpios
+        - swctrl-gpios
+        - vddio-supply
+        - vddaon-supply
+        - vddbtcxmx-supply
+        - vddrfacmn-supply
+        - vddrfa0p8-supply
+        - vddrfa1p7-supply
+        - vddrfa1p2-supply
+        - vddasd-supply
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+
+        bluetooth {
+            compatible = "qcom,qca6174-bt";
+            enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+            clocks = <&divclk4>;
+            firmware-name = "nvm_00440302.bin";
+        };
+    };
+  - |
+    serial {
+
+        bluetooth {
+            compatible = "qcom,wcn3990-bt";
+            vddio-supply = <&vreg_s4a_1p8>;
+            vddxo-supply = <&vreg_l7a_1p8>;
+            vddrf-supply = <&vreg_l17a_1p3>;
+            vddch0-supply = <&vreg_l25a_3p3>;
+            max-speed = <3200000>;
+            firmware-name = "crnv21.bin";
+        };
+    };
+  - |
+    serial {
+
+        bluetooth {
+            compatible = "qcom,wcn6750-bt";
+            pinctrl-names = "default";
+            pinctrl-0 = <&bt_en_default>;
+            enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+            swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+            vddio-supply = <&vreg_l19b_1p8>;
+            vddaon-supply = <&vreg_s7b_0p9>;
+            vddbtcxmx-supply = <&vreg_s7b_0p9>;
+            vddrfacmn-supply = <&vreg_s7b_0p9>;
+            vddrfa0p8-supply = <&vreg_s7b_0p9>;
+            vddrfa1p7-supply = <&vreg_s1b_1p8>;
+            vddrfa1p2-supply = <&vreg_s8b_1p2>;
+            vddrfa2p2-supply = <&vreg_s1c_2p2>;
+            vddasd-supply = <&vreg_l11c_2p8>;
+            max-speed = <3200000>;
+            firmware-name = "msnv11.bin";
+        };
+    };