summaryrefslogtreecommitdiff
path: root/Makefile
diff options
context:
space:
mode:
authorMasahiro Yamada <yamada.masahiro@socionext.com>2019-08-14 18:19:18 +0300
committerMasahiro Yamada <yamada.masahiro@socionext.com>2019-08-21 15:05:21 +0300
commit394053f4a4b3e3eeeaa67b67fc886a9a75bd9e4d (patch)
treebf652d005b2400614d2e8c2e2332cfa3c5187e72 /Makefile
parent8959e39272d6e625da1cd62f2e7622d79e04447d (diff)
downloadlinux-394053f4a4b3e3eeeaa67b67fc886a9a75bd9e4d.tar.xz
kbuild: make single targets work more correctly
Currently, the single target build directly descends into the directory of the target. For example, $ make foo/bar/baz.o ... directly descends into foo/bar/. On the other hand, the normal build usually descends one directory at a time, i.e. descends into foo/, and then foo/bar/. This difference causes some problems. [1] miss subdir-asflags-y, subdir-ccflags-y in upper Makefiles The options in subdir-{as,cc}flags-y take effect in the current and its sub-directories. In other words, they are inherited downward. In the example above, the single target will miss subdir-{as,cc}flags-y if they are defined in foo/Makefile. [2] could be built in a different directory As Documentation/kbuild/modules.rst section 4.3 says, Kbuild can handle files that are spread over several sub-directories. The build rule of foo/bar/baz.o may not necessarily be specified in foo/bar/Makefile. It might be specifies in foo/Makefile as follows: [foo/Makefile] obj-y := bar/baz.o This often happens when a module is so big that its source files are divided into sub-directories. In this case, there is no Makefile in the foo/bar/ directory, yet the single target descends into foo/bar/, then fails due to the missing Makefile. You can still do 'make foo/bar/' for partial building, but cannot do 'make foo/bar/baz.s'. I believe the single target '%.s' is a useful feature for inspecting the compiler output. Some modules work around this issue by putting an empty Makefile in every sub-directory. This commit fixes those problems by making the single target build descend in the same way as the normal build does. Another change is the single target build will observe the CONFIG options. Previously, it allowed users to build the foo.o even when the corresponding CONFIG_FOO is disabled: obj-$(CONFIG_FOO) += foo.o In the new behavior, the single target build will just fail and show "No rule to make target ..." (or "Nothing to be done for ..." if the stale object already exists, but cannot be updated). The disadvantage of this commit is the build speed. Now that the single target build visits every directory and parses lots of Makefiles, it is slower than before. (But, I hope it will not be too slow.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Diffstat (limited to 'Makefile')
-rw-r--r--Makefile81
1 files changed, 50 insertions, 31 deletions
diff --git a/Makefile b/Makefile
index 9661fa37158f..68e7ac654f4c 100644
--- a/Makefile
+++ b/Makefile
@@ -230,6 +230,8 @@ endif
export KBUILD_CHECKSRC KBUILD_EXTMOD
+extmod-prefix = $(if $(KBUILD_EXTMOD),$(KBUILD_EXTMOD)/)
+
ifeq ($(abs_srctree),$(abs_objtree))
# building in the source tree
srctree := .
@@ -271,11 +273,13 @@ no-dot-config-targets := $(clean-targets) \
%asm-generic kernelversion %src-pkg
no-sync-config-targets := $(no-dot-config-targets) install %install \
kernelrelease
+single-targets := %.a %.i %.ko %.lds %.ll %.lst %.mod %.o %.s %.symtypes %/
config-build :=
mixed-build :=
need-config := 1
may-sync-config := 1
+single-build :=
ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
@@ -302,6 +306,14 @@ ifeq ($(KBUILD_EXTMOD),)
endif
endif
+# We cannot build single targets and the others at the same time
+ifneq ($(filter $(single-targets), $(MAKECMDGOALS)),)
+ single-build := 1
+ ifneq ($(filter-out $(single-targets), $(MAKECMDGOALS)),)
+ mixed-build := 1
+ endif
+endif
+
# For "make -j clean all", "make -j mrproper defconfig all", etc.
ifneq ($(filter $(clean-targets),$(MAKECMDGOALS)),)
ifneq ($(filter-out $(clean-targets),$(MAKECMDGOALS)),)
@@ -1003,7 +1015,7 @@ endif
PHONY += prepare0
-export MODORDER := $(if $(KBUILD_EXTMOD),$(KBUILD_EXTMOD)/)modules.order
+export MODORDER := $(extmod-prefix)modules.order
ifeq ($(KBUILD_EXTMOD),)
core-y += kernel/ certs/ mm/ fs/ ipc/ security/ crypto/ block/
@@ -1655,7 +1667,7 @@ endif # KBUILD_EXTMOD
PHONY += descend $(build-dirs)
descend: $(build-dirs)
$(build-dirs): prepare
- $(Q)$(MAKE) $(build)=$@ need-builtin=1 need-modorder=1
+ $(Q)$(MAKE) $(build)=$@ single-build=$(single-build) need-builtin=1 need-modorder=1
clean-dirs := $(addprefix _clean_, $(clean-dirs))
PHONY += $(clean-dirs) clean
@@ -1752,40 +1764,47 @@ tools/%: FORCE
# Single targets
# ---------------------------------------------------------------------------
-# Single targets are compatible with:
-# - build with mixed source and output
-# - build with separate output dir 'make O=...'
-# - external modules
+# To build individual files in subdirectories, you can do like this:
+#
+# make foo/bar/baz.s
#
-# target-dir => where to store outputfile
-# build-dir => directory in kernel source tree to use
-
-build-target = $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD)/)$@
-build-dir = $(patsubst %/,%,$(dir $(build-target)))
-
-%.i: prepare FORCE
- $(Q)$(MAKE) $(build)=$(build-dir) $(build-target)
-%.ll: prepare FORCE
- $(Q)$(MAKE) $(build)=$(build-dir) $(build-target)
-%.lst: prepare FORCE
- $(Q)$(MAKE) $(build)=$(build-dir) $(build-target)
-%.o: prepare FORCE
- $(Q)$(MAKE) $(build)=$(build-dir) $(build-target)
-%.s: prepare FORCE
- $(Q)$(MAKE) $(build)=$(build-dir) $(build-target)
-%.symtypes: prepare FORCE
- $(Q)$(MAKE) $(build)=$(build-dir) $(build-target)
+# The supported suffixes for single-target are listed in 'single-targets'
+#
+# To build only under specific subdirectories, you can do like this:
+#
+# make foo/bar/baz/
+
+ifdef single-build
+
+single-all := $(filter $(single-targets), $(MAKECMDGOALS))
+
+# .ko is special because modpost is needed
+single-ko := $(sort $(filter %.ko, $(single-all)))
+single-no-ko := $(sort $(patsubst %.ko,%.mod, $(single-all)))
+
+$(single-ko): single_modpost
+ @:
+$(single-no-ko): descend
+ @:
+
ifeq ($(KBUILD_EXTMOD),)
-# For the single build of an in-tree module, use a temporary file to avoid
+# For the single build of in-tree modules, use a temporary file to avoid
# the situation of modules_install installing an invalid modules.order.
-%.ko: MODORDER := .modules.tmp
+MODORDER := .modules.tmp
endif
-%.ko: prepare FORCE
- $(Q)$(MAKE) $(build)=$(build-dir) $(build-target:.ko=.mod)
- $(Q)echo $(build-target) > $(MODORDER)
+
+PHONY += single_modpost
+single_modpost: $(single-no-ko)
+ $(Q){ $(foreach m, $(single-ko), echo $(extmod-prefix)$m;) } > $(MODORDER)
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
-%/: prepare FORCE
- $(Q)$(MAKE) KBUILD_MODULES=1 $(build)=$(build-dir) need-modorder=1
+
+KBUILD_MODULES := 1
+
+export KBUILD_SINGLE_TARGETS := $(addprefix $(extmod-prefix), $(single-no-ko))
+
+single-build = $(if $(filter-out $@/, $(single-no-ko)),1)
+
+endif
# FIXME Should go into a make.lib or something
# ===========================================================================