diff options
author | Vineet Gupta <vgupta@synopsys.com> | 2016-04-18 08:19:56 +0300 |
---|---|---|
committer | Vineet Gupta <vgupta@synopsys.com> | 2016-05-05 14:05:46 +0300 |
commit | 26f9d5fd82ca20fe536cb493ec7cf5628f8997e5 (patch) | |
tree | c41863d4e667587efb23cf46e04d013e4ac2ea33 /arch/arc/mm/init.c | |
parent | 2519d753676bdf2460fbbcde276d5b6ba8d6b695 (diff) | |
download | linux-26f9d5fd82ca20fe536cb493ec7cf5628f8997e5.tar.xz |
ARC: support HIGHMEM even without PAE40
Initial HIGHMEM support on ARC was introduced for PAE40 where the low
memory (0x8000_0000 based) and high memory (0x1_0000_0000) were
physically contiguous. So CONFIG_FLATMEM sufficed (despite a peipheral
hole in the middle, which wasted a bit of struct page memory, but things
worked).
However w/o PAE, highmem was not possible and we could only reach
~1.75GB of DDR. Now there is a use case to access ~4GB of DDR w/o PAE40
The idea is to have low memory at canonical 0x8000_0000 and highmem
at 0 so enire 4GB address space is available for physical addressing
This needs additional platform/interconnect mapping to convert
the non contiguous physical addresses into linear bus adresses.
From Linux point of view, non contiguous divide means FLATMEM no
longer works and DISCONTIGMEM is needed to track the pfns in the 2
regions.
This scheme would also work for PAE40, only better in that we don't
waste struct page memory for the peripheral hole.
The DT description will be something like
memory {
...
reg = <0x80000000 0x200000000 /* 512MB: lowmem */
0x00000000 0x10000000>; /* 256MB: highmem */
}
Signed-off-by: Noam Camus <noamc@ezchip.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Diffstat (limited to 'arch/arc/mm/init.c')
-rw-r--r-- | arch/arc/mm/init.c | 54 |
1 files changed, 39 insertions, 15 deletions
diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c index 5487d0b97400..8be930394750 100644 --- a/arch/arc/mm/init.c +++ b/arch/arc/mm/init.c @@ -30,11 +30,16 @@ static const unsigned long low_mem_start = CONFIG_LINUX_LINK_BASE; static unsigned long low_mem_sz; #ifdef CONFIG_HIGHMEM -static unsigned long min_high_pfn; +static unsigned long min_high_pfn, max_high_pfn; static u64 high_mem_start; static u64 high_mem_sz; #endif +#ifdef CONFIG_DISCONTIGMEM +struct pglist_data node_data[MAX_NUMNODES] __read_mostly; +EXPORT_SYMBOL(node_data); +#endif + /* User can over-ride above with "mem=nnn[KkMm]" in cmdline */ static int __init setup_mem_sz(char *str) { @@ -109,13 +114,11 @@ void __init setup_arch_memory(void) /* Last usable page of low mem */ max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz); -#ifdef CONFIG_HIGHMEM - min_high_pfn = PFN_DOWN(high_mem_start); - max_pfn = PFN_DOWN(high_mem_start + high_mem_sz); +#ifdef CONFIG_FLATMEM + /* pfn_valid() uses this */ + max_mapnr = max_low_pfn - min_low_pfn; #endif - max_mapnr = max_pfn - min_low_pfn; - /*------------- bootmem allocator setup -----------------------*/ /* @@ -129,7 +132,7 @@ void __init setup_arch_memory(void) * the crash */ - memblock_add(low_mem_start, low_mem_sz); + memblock_add_node(low_mem_start, low_mem_sz, 0); memblock_reserve(low_mem_start, __pa(_end) - low_mem_start); #ifdef CONFIG_BLK_DEV_INITRD @@ -149,13 +152,6 @@ void __init setup_arch_memory(void) zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn; zones_holes[ZONE_NORMAL] = 0; -#ifdef CONFIG_HIGHMEM - zones_size[ZONE_HIGHMEM] = max_pfn - max_low_pfn; - - /* This handles the peripheral address space hole */ - zones_holes[ZONE_HIGHMEM] = min_high_pfn - max_low_pfn; -#endif - /* * We can't use the helper free_area_init(zones[]) because it uses * PAGE_OFFSET to compute the @min_low_pfn which would be wrong @@ -168,6 +164,34 @@ void __init setup_arch_memory(void) zones_holes); /* holes */ #ifdef CONFIG_HIGHMEM + /* + * Populate a new node with highmem + * + * On ARC (w/o PAE) HIGHMEM addresses are actually smaller (0 based) + * than addresses in normal ala low memory (0x8000_0000 based). + * Even with PAE, the huge peripheral space hole would waste a lot of + * mem with single mem_map[]. This warrants a mem_map per region design. + * Thus HIGHMEM on ARC is imlemented with DISCONTIGMEM. + * + * DISCONTIGMEM in turns requires multiple nodes. node 0 above is + * populated with normal memory zone while node 1 only has highmem + */ + node_set_online(1); + + min_high_pfn = PFN_DOWN(high_mem_start); + max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz); + + zones_size[ZONE_NORMAL] = 0; + zones_holes[ZONE_NORMAL] = 0; + + zones_size[ZONE_HIGHMEM] = max_high_pfn - min_high_pfn; + zones_holes[ZONE_HIGHMEM] = 0; + + free_area_init_node(1, /* node-id */ + zones_size, /* num pages per zone */ + min_high_pfn, /* first pfn of node */ + zones_holes); /* holes */ + high_memory = (void *)(min_high_pfn << PAGE_SHIFT); kmap_init(); #endif @@ -185,7 +209,7 @@ void __init mem_init(void) unsigned long tmp; reset_all_zones_managed_pages(); - for (tmp = min_high_pfn; tmp < max_pfn; tmp++) + for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++) free_highmem_page(pfn_to_page(tmp)); #endif |