ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 323 deletions

diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
deleted file mode 100644
index 20ac775059ca..000000000000
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ /dev/null
@@ -1,323 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit
- *
- *  Copyright (C) 2014 Atmel,
- *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
- */
-/dts-v1/;
-#include "sama5d4.dtsi"
-
-/ {
-	model = "Atmel SAMA5D4-EK";
-	compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x20000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			adc0: adc@fc034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <
-					/* external trigger conflicts with USBA_VBUS */
-					&pinctrl_adc0_ad0
-					&pinctrl_adc0_ad1
-					&pinctrl_adc0_ad2
-					&pinctrl_adc0_ad3
-					&pinctrl_adc0_ad4
-					>;
-				/* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */
-				atmel,adc-vref = <3300>;
-				/*atmel,adc-ts-wires = <4>;*/	/* Set up ADC touch screen */
-				status = "okay";		/* Enable ADC IIO support */
-			};
-
-			mmc0: mmc@f8000000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioE 5 0>;
-				};
-			};
-
-			ssc0: ssc@f8008000 {
-				status = "okay";
-			};
-
-			spi0: spi@f8010000 {
-				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
-				status = "okay";
-				flash@0 {
-					compatible = "atmel,at25df321a";
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-				};
-			};
-
-			i2c0: i2c@f8014000 {
-				status = "okay";
-
-				wm8904: codec@1a {
-					compatible = "wlf,wm8904";
-					reg = <0x1a>;
-					clocks = <&pmc PMC_TYPE_SYSTEM 10>;
-					clock-names = "mclk";
-				};
-
-				qt1070:keyboard@1b {
-					compatible = "qt1070";
-					reg = <0x1b>;
-					interrupt-parent = <&pioE>;
-					interrupts = <25 0x0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_qt1070_irq>;
-					wakeup-source;
-				};
-
-				touchscreen@4c {
-					compatible = "atmel,maxtouch";
-					reg = <0x4c>;
-					interrupt-parent = <&pioE>;
-					interrupts = <24 0x0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_mxt_ts>;
-				};
-			};
-
-			macb0: ethernet@f8020000 {
-				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
-				phy-mode = "rmii";
-				status = "okay";
-
-				ethernet-phy@1 {
-					reg = <0x1>;
-					interrupt-parent = <&pioE>;
-					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-				};
-			};
-
-			mmc1: mmc@fc000000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioE 6 0>;
-				};
-			};
-
-			usart2: serial@fc008000 {
-				status = "okay";
-			};
-
-			usart3: serial@fc00c000 {
-				status = "okay";
-			};
-
-			usart4: serial@fc010000 {
-				status = "okay";
-			};
-
-			tcb2: timer@fc024000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>;
-				};
-
-				timer@1 {
-					compatible = "atmel,tcb-timer";
-					reg = <1>;
-				};
-			};
-
-			watchdog@fc068640 {
-				status = "okay";
-			};
-
-			pinctrl@fc06a000 {
-				board {
-					pinctrl_macb0_phy_irq: macb0_phy_irq {
-						atmel,pins =
-							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-					pinctrl_mmc0_cd: mmc0_cd {
-						atmel,pins =
-							<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-					pinctrl_mmc1_cd: mmc1_cd {
-						atmel,pins =
-							<AT91_PIOE 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-					pinctrl_pck2_as_audio_mck: pck2_as_audio_mck {
-						atmel,pins =
-							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-					pinctrl_usba_vbus: usba_vbus {
-						atmel,pins =
-							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
-					};
-					pinctrl_key_gpio: key_gpio_0 {
-						atmel,pins =
-							<AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */
-					};
-					pinctrl_qt1070_irq: qt1070_irq {
-						atmel,pins =
-							<AT91_PIOE 25 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-					pinctrl_mxt_ts: mxt_irq {
-						atmel,pins =
-							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-				};
-			};
-		};
-
-		usb0: gadget@400000 {
-			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usba_vbus>;
-			status = "okay";
-		};
-
-		usb1: ohci@500000 {
-			num-ports = <3>;
-			atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */
-					   &pioE 11 GPIO_ACTIVE_LOW
-					   &pioE 12 GPIO_ACTIVE_LOW
-					  >;
-			status = "okay";
-		};
-
-		usb2: ehci@600000 {
-			status = "okay";
-		};
-
-		ebi: ebi@10000000 {
-			pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe
-				     &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy
-				     &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-
-				nand@3 {
-					reg = <0x3 0x0 0x2>;
-					atmel,rb = <0>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "hw";
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						at91bootstrap@0 {
-							label = "at91bootstrap";
-							reg = <0x0 0x40000>;
-						};
-
-						bootloader@40000 {
-							label = "bootloader";
-							reg = <0x40000 0x80000>;
-						};
-
-						bootloaderenv@c0000 {
-							label = "bootloader env";
-							reg = <0xc0000 0xc0000>;
-						};
-
-						dtb@180000 {
-							label = "device tree";
-							reg = <0x180000 0x80000>;
-						};
-
-						kernel@200000 {
-							label = "kernel";
-							reg = <0x200000 0x600000>;
-						};
-
-						rootfs@800000 {
-							label = "rootfs";
-							reg = <0x800000 0x0f800000>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_key_gpio>;
-
-		button {
-			label = "pb_user1";
-			gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
-			linux,code = <0x100>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		status = "okay";
-
-		led-d8 {
-			label = "d8";
-			/* PE28, conflicts with usart4 rts pin */
-			gpios = <&pioE 28 GPIO_ACTIVE_LOW>;
-		};
-
-		led-d9 {
-			label = "d9";
-			gpios = <&pioE 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-d10 {
-			label = "d10";
-			gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	sound {
-		compatible = "atmel,asoc-wm8904";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pck2_as_audio_mck>;
-
-		atmel,model = "wm8904 @ SAMA5D4EK";
-		atmel,audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"IN1L", "Line In Jack",
-			"IN1R", "Line In Jack";
-
-		atmel,ssc-controller = <&ssc0>;
-		atmel,audio-codec = <&wm8904>;
-	};
-};