diff options
author | Boris Brezillon <boris.brezillon@free-electrons.com> | 2017-05-30 12:20:53 +0300 |
---|---|---|
committer | Alexandre Belloni <alexandre.belloni@free-electrons.com> | 2017-05-31 12:55:41 +0300 |
commit | 1004a2977bdc7566bca87c565541c3232ed467c4 (patch) | |
tree | ff3d3aca77c0e3288c6296263dd0795e60680478 /arch/arm/boot/dts/at91sam9261.dtsi | |
parent | d9c41bf30cf8cea379f5947624e76c893791fec0 (diff) | |
download | linux-1004a2977bdc7566bca87c565541c3232ed467c4.tar.xz |
ARM: dts: at91: Switch to the new NAND bindings
Use the new EBI/NAND bindings to declare NAND chips and remove old NAND
nodes along the way.
Note that we keep using old bindings in at91rm9200.dtsi because this
SoC is not supported by the EBI driver.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Diffstat (limited to 'arch/arm/boot/dts/at91sam9261.dtsi')
-rw-r--r-- | arch/arm/boot/dts/at91sam9261.dtsi | 24 |
1 files changed, 6 insertions, 18 deletions
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 3ab0c21134f1..a05353f96151 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -118,22 +118,6 @@ }; }; - nand0: nand@40000000 { - compatible = "atmel,at91rm9200-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x40000000 0x10000000>; - atmel,nand-addr-offset = <22>; - atmel,nand-cmd-offset = <21>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - - gpios = <&pioC 15 GPIO_ACTIVE_HIGH>, - <&pioC 14 GPIO_ACTIVE_HIGH>, - <0>; - status = "disabled"; - }; - apb { compatible = "simple-bus"; #address-cells = <1>; @@ -394,9 +378,13 @@ }; nand { - pinctrl_nand: nand-0 { + pinctrl_nand_rb: nand-rb-0 { + atmel,pins = + <AT91_PIOC 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_nand_cs: nand-cs-0 { atmel,pins = - <AT91_PIOC 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>, <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; }; }; |