diff options
author | Boris Brezillon <boris.brezillon@free-electrons.com> | 2017-05-30 12:20:53 +0300 |
---|---|---|
committer | Alexandre Belloni <alexandre.belloni@free-electrons.com> | 2017-05-31 12:55:41 +0300 |
commit | 1004a2977bdc7566bca87c565541c3232ed467c4 (patch) | |
tree | ff3d3aca77c0e3288c6296263dd0795e60680478 /arch/arm/boot/dts/at91sam9x5cm.dtsi | |
parent | d9c41bf30cf8cea379f5947624e76c893791fec0 (diff) | |
download | linux-1004a2977bdc7566bca87c565541c3232ed467c4.tar.xz |
ARM: dts: at91: Switch to the new NAND bindings
Use the new EBI/NAND bindings to declare NAND chips and remove old NAND
nodes along the way.
Note that we keep using old bindings in at91rm9200.dtsi because this
SoC is not supported by the EBI driver.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Diffstat (limited to 'arch/arm/boot/dts/at91sam9x5cm.dtsi')
-rw-r--r-- | arch/arm/boot/dts/at91sam9x5cm.dtsi | 83 |
1 files changed, 53 insertions, 30 deletions
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index b098ad8cd93a..bdeaa0b64a5b 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -37,38 +37,61 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - atmel,has-pmecc; /* Enable PMECC */ - atmel,pmecc-cap = <2>; - atmel,pmecc-sector-size = <512>; - nand-on-flash-bbt; + ebi: ebi@10000000 { + pinctrl-0 = <&pinctrl_ebi_addr_nand + &pinctrl_ebi_data_0_7>; + pinctrl-names = "default"; status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; - - uboot@40000 { - label = "u-boot"; - reg = <0x40000 0x80000>; - }; - - ubootenv@c0000 { - label = "U-Boot Env"; - reg = <0xc0000 0x140000>; - }; - - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; - - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x1f800000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_oe_we + &pinctrl_nand_cs + &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <2>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + uboot@40000 { + label = "u-boot"; + reg = <0x40000 0x80000>; + }; + + ubootenv@c0000 { + label = "U-Boot Env"; + reg = <0xc0000 0x140000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x1f800000>; + }; + }; + }; }; }; }; |